SPL REPAIR TO PUMP HOUSE NO 12 SUB STATION 7, 8, 9 PUMP HOUSE NO 1, SUB STATION, SERVICE STATION AND COMPLAINT CELL OF AGE B/R-I UNDER AGE B/R-I OF GE R OORKEE

Demolition of concrete (Un-reinforced) of any description in any position complete all as specified and as directed

M&L 25 mm thick PCC type B-0 (1:2:4), using (12.5mm graded aggregate) as in sub base of flooring/as in roof leveling, finished even and fair complete all as specified and as directed

All as per above item but exc 1.5 and nexc 4 sqm

Dismantling timber scantling 40 sq cm & over in section, any position in unframed work complete all as specified and as directed.

M&L 2nd class hard wood in timbers scantling fixed in clean sawn complete all as specified and as directed.

Dismantling of Asbestos cement (corrugated, semi corrugated etc) sheets in roof covering complete all as directed

M&L for pre-painted, galvalume aluminium zinc coating Gl based profiled steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa AZ-150, as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed

M&L M&L for PCC (1:2:4) Ty B-0 using 12.5mm thick course aggregate as in PCC Gola, hold fast cills/steps/coping etc complete all as specified and directed

M&L for Steel tubular Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to I.S.1161-1979 grade Fe-290 (Gde St-165 complete all as specified and directed).

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insularion boards/slabs/blankets, any thickness, including cover fillets, complete all as directed

M&L in repair for Providing and fixing tiled false ceiling of designer tiles(high pressure steam Cured) of 4mm thickness (as per IS:14862) of size 595x595mm and approved design (Cascade or Electra or equivalent) in true horizontal level, suspended on inner locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grms, both side inclusive and black painted groove on all T webs) consisting of main "T" runner with suitably spaced joints to get required length and 15x32mm made from 0.3mm thick sheet, 1200mm long spaced between main "T" at 600mm C/C to form a grid of 1200x600mm and secondly cross "T" of length 600mm and size 15x32mm made of 0.30mm thick sheet to be interlocked at middle of 1200x600mm panel to form grids of 600x600mm and wall angle 15x20x0.36mm and laying false ceiling tiles and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using Gl soffit cleats fixed to existing RCC lintel with dash through fasteners, Gl adjustable rods of 3mm dia with galvanized butterfly level clips, spaced at 1200mm c/c along main "T", bottom exposed width of 15mm of all "T" sections shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5 mm width, at all heights as per directions complete all as specified and directed.

S&F RCC M-30 Grade approved Design Precast concrete post of size 150mm x 150mm x 2100 mm height, having two grooves of size 55 x 28 mm so as to receive 7 Nos of panels having size of 1500 mm x 300 mm x 50 mm thickness (1 Panel at bottom + 4 Design Panel bottom to top +1 Jafari type panel at top)

Taking down cement or cement lime plaster on brick or stone walls etc'including racking out joints, hacking for keys, scrubbing down with water etc complete all as specified & directed

M&L for 15 mm thick rendering in cement mortar (1:6) using coarse sand on fair faces of brick work of concrete surfaces of walls, finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for 15 mm thick rendering on wall/concrete surface with cement mortar 1:4 finished even and smooth (without using extra cement) complete all as specified and directed

M&L applying two Cement Base paint on New surfaces (wall) including primer all as specified and directed

M&L for rendering 10 mm thick in cement (1:3) on fair faces of concrete as in ceiling. finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of old decorated surfaces (plastered/un-plastered) of ceiling incl cornices by brooming down with steel brush, scrapping down smoke soot, moulds, moos and efflorescent salts and trading oil and greasy spots and applying One coat of white wash on ceiling complete all as specified and directed.

M&L for preparation of old decorated wall surfaces by complete removal of existing treatment on walls including cornices by broming down with steel brush, scrapping down smoke soot, moulds moss and efflorescent salts and trading oil and grease spots and applying one coat of cement base paint complete all as specified and directed.

M&L for complete removal of existing treatment on walls incl washing, rubbing down and stopping and applying two coats of oil bound distemper over 1 mm thick wall care putty (White or tinted) complete all as specified and directed.

M&L Preparing New steel surface of any description over 10 cm width girth not otherwise describe and applying two coat of synthethic enamel paint over a coat of red oxide complete all as specified and directed.

M&L for applying two coat of synthetic enamel paint In new surface over a coat of pink primer on wooden surface exceeding 10 cm in width or girth including preparation of surfaces and including necessary sacffolding complete all as specified and directed.

M&L for 75 mm thick PCC (1:3:6) as in plinth protection surface finish even and smooth without using extra cement complete all as specified and directed.

M&L coloured non skid tile 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.06 sqm n exc, 0.18 sqm in floor etc set and jointed with neat cement slurry and pointed in colur cement to match complete all as specified and directed

S&F in repair WC vitreous china, squatting pan orissa patern size 580x440mm white with intergral foot rest & Por S trap, flush pipie complete excluding cistern complete all as specified and directed.

M&L coloured non skid tile 7 to 8mm thick (square/ rectangular) area of each tiles exc.0018 sqm n exc. 0.36 sqm in vertical surface/suck as skirting and dado etc. set and jointed with neat cement slurry and pointed in colur cement to match including 10 mm thick back plaster in cm 1:6 complete all as specified and directed

M&L for 75mm thick cement concrete type D-2, 1:4:8 using (40mm graded aggregate) as in sub base complete all as specified and directed

Supply and laying sand (25 mm thickness) for cushioning to interlocking paver block complete all as specified and directed.

S&F GI tubing 15mm bore, medium grade with all fitting and concealed to wall ceiling or laid in floor complete all as specified and directed

M&L for providing precast cement concrete 1:2:4 type B-1 using 20mm graded aggregates as in roof kerbs, edges of pathways, mud stops with fair finish surfaces, including chamfers, weatherings etc including necessary form work complete all as specified and as directed.

M&L for Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification of drawing complete all as specified and directed

S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

S&F Framed work as in doors or gates or chowkhat of angle or other section with gusset plates, rails, braces, grill, grating etc, complete, drilled for fixing of steel sheeting or other covering either hooks and hinges or steel hanging door fittings including of steel sheeting or other covering, running rails and guides and hanging also fastening and fixing complete complete all as specified and directed.

Mild steel bars 6mm to 8mm dia (and flat iron where quered), cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mm dia or securing with clips or welded to flat iron complete all as specified

S&F for 500 Itr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) ISI Mark hoisted and fixed in position including all fitting nipple complete all as specified in SSR Pt-1.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provission of binding wire complete all as specified and directed.

Dismantling expanded metal n.exc 4 kg per sqm, any thickness or mesh, fixed with steel or wood fillets, if any complete all as specified and directed.

Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and directed.

S&F in repair Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, incl securing or tying at crossing with and provn of Galvanised mild steel wire, staples or steel pins, complete all as specified and directed.

M&L for Precast RCC type B-1 (1:2:4), using 20 mm graded stone aggregates cover slabs for manholes, open drains etc. including all mouldings but excluding frame, set in cement mortar (1:4) complete all as specified.

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed

Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, but length of bolt exc 10cm and n exc 15cm long complete all as specified and directed

Excavation in post hole each n exc 0.5cum getting out in hard/ dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm, watering and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed.

M&L Plain cement concrete (1:3:6) type C2 (using 40mm graded stone aggregate) foundation of pillars and posts complete all as specified and directed.