GE/KHU-47/2021-22 SPECIAL REPAIR TO BUILDING No T-24 OF 8 MTN ARTY BDE AT KHUMBATHANG IN THE AOR OF AGE B/R-I KHUMBATHANG, UNDER GE KHUMBATHANG

Amount

Dismantling of plain or corrugated steel sheeting, any guage, thickness, including Nainital patterns roof covering complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving not exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exc 4 Sqm each complete all as specified and directed.

Demolition of PCC as in block walling built in cement mortar complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete, etc. complete all as specified and directed by Engr-in-Charge.

M&L for precast cement concrete block masonry with solid block exc. 10 cms in width made with PCC 1:3:6 type C-1 (using 20 mm graded aggregate) and set in CM 1:4 complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade with grey cement and no pigment complete all as specified and directed.

M&L sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. Note :Punned thickness will only be measured and paid.

M&L 25 mm thick PCC 1:2:4 type B0 using 12.5mm graded aggregate as in floors complete all as specified and directed.

S&F 250 mm Aluminium alloy, anodised,sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed with bolt not less than 12 mm dia with and incl a minimum of 6 bolt and nut , four on bolt plate and two on staple plate and fixed complete all as specified.

S&F 125mm long , extruded aluminium alloy handles fabricated type anodised and fixed complete all as specified.

S&F 125 mm aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified.

S&F 75 mm butt hinges medium weight cold rolled mild steel fixed with screws or welded all as directed.

S & F in repair Door closer hydraulically regulated designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified.

S&F floor door stopper of aluminium alloy body and tongue 150 mm overall length, anodized with hard drawn steel spring, fixed in floor all as specified.

M&L for rendering 15 mm in CM 1:6 thick on fair faces of brick work or concrete surfaces surface even and smooth without using extra cement complete all as specified.

M&L for 15 mm thick cement plaster in cement mortar 1:4 on concrete or brick surface and finished even and fair without using extra cement upto 4 storeys building complete all as directed and specified.

M&L for prepartion of new plaster surface & applying two coat of cement base paint over one coat of primer on wall complete all as specified.

M&L for hacking out old broken (any thickness,size,quality or description) glass from wooden frames or stone,concrete or brick surrounds,glazed with putty or fixed with beads complete all as specified and directed by Engr-in -charge.

S&F 5 mm thick Sheet glass, pin head ordinary quality, in squares exc 0.5 sq. m each pane fixed with glazing pins/spring clips complete all as specified and directed by Engr-in-Charge.

M&L for providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and smooth without using extra cement and providing joints throughtout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified.

Dismantling wall and ceiling boards (fibre,pulp,insulation,etc) or insulation boards/slabs/blankets,any thickness including cover fillets complete all as specified and directed.

Dismantling timber scantling in fillets,posts,rafters,purlins etc under 40 Sqcm in section in any position unframed work complete all as specified and directed.

M&L 9mm thick, prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with nails to timber frame work as in ceiling complete all as specified.

M&L 12mm thick, prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work as in wall complete all as specified.

M&L second class soft wood plain fillets,square or rectangular in section of area exc 13 and n exc 25 sqcm clean sawn secured with nails or brads complete all as specified.

M&L second class soft wood plain fillets,square or rectangular in section of area exc 6 and n exc 13 sqcm clean sawn secured with nails or brads complete all as specified.

M&L second class soft wood but bullnosed,splayed,chamfered or rounded on one edge or face fillets, in section of area exc 3 and n exc 6 sqcm clean sawn secured with nails or brads complete all as specified.

M&L second class soft wood but bullnosed,splayed,chamfered or rounded on one edge or face fillets, in section of area n exc 3 sqcm clean sawn secured with nails or brads complete all as specified.

Dismantling water tanks of capacity exc 500 ltrs but n exc 1000 ltrs and removing to store complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tank 1000 Ltrs capacity triple layered (cylinderical/vertical with closed top) hoisted and fixed in position, inside or outside the building, including minor repairing to iron pipe for making connections and securing access cover complete all as specified and directed.

S&F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for ironpipe and fixed. (Minimum weight 210 gms) complete screwed for iron pipe or brass ferrule of size 20 mm bore.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store bore of pipe 15mm bore pipe complete all as specified and directed.

S&F Steel water tubing 15 mm bore medium grade galvanised with all fittings including short lengths, fixed to walls, or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store bore of pipe 20mm bore pipe complete all as specified and directed.

S&F Steel water tubing 20 mm bore medium grade galvanised with all fittings including short lengths, fixed to walls, or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and directed.

S&F in repair 15mm stop valve, fancy chromium plated, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions of bore dia 15mm complete all as specified and directed.

S & F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP brackets guard and railing 60cm long complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair 15mm Pillar taps, fany type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks fly-nuts, screwed for iron pipe and fixed

S&F in repair Bib taps, cast copper alloy, chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed for bore of pipe 15 mm, all as specified.

S&F in repair CP Wall mixer (wall mounted model ) 3-1 system (Code: FUS-29281) with provision for telephonic shower and overhead shower complet with 115 mm long bend pipe connecting legs and wall flanges. Hand shower (Code : HSH-1717) 105 mm dia round shape multi flow with air effect (ABS body & face plate chrome plated) with rubit cleaning system and over head shower 105mm dia round shape single flow (ABS body chrome plated with grey face plate) with rubit cleaning system Code (Code : OHS-1709) and with shower arm (Code : SHA-571) 600mm long round shape with 90 degree bend for wall mounted shower with flange MAKE-JAQUAR or equivalent in MARC/KOHLER/JOHNSON/ESS ESS.

S&F Vitreous china single piece WC with PP soft cose seat cover, Hinges, Fixing accessories and accessories set cistern fitting size 370 x 665 x770 mm, including S trap-300mm, complete all as specified and directed . Make: JAQUAR Cat Part No FSS-29853S300UFSM, or equivalent in ROCA/KOHLER/ HR JOHNSON. .

S&F 2 mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified & directed.

S&F prepainted galvanised aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified.

S&F powder coated anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing including powder coating etc, complete all as specified. (Note:Thickness of powder coating not less than 50 micron).

S&F Anodised aluminium powder coated door shutters af any colour, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles (150 mm) 02 Nos in each door, hinges (100 mm ) 03 Nos each door, anodised aluminium snap beading, screws, etc complete all as specified and directed by Engr-in-charge. (Note:Thickness of powder coating not less than 50 micron).

S&F Anodised aluminium powder coated ventilator glazed shutters of any colour, top hung type without sash bars, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (01 Nos), hinges type B-21 100 mm long (02 Nos), suitable handle 125 mm long (01 Nos) etc complete all as specified and directed by Engr-in-charge. (Note:Thickness of powder coating not less than 50 micron).

S&F Solar control film 25 micron reflective type sticked to glass panes for exc 1.5 sqm as per instructions of manufacturers complete all as specified.

M&L for wooden floor tiles 7 mm thick with dove tailed joints laid over 150 micron polythene film and 3 mm thick foam as per manufacturer's instructions,including taking down of old wooden flooring and fixed with decorative wooden beadings as per site requirement complete all as specified and directed by Engineer-in-Charge. Note: Make and shade of tiles shall be all as approved.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

Non Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but n.exc 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor tiles complete all as specified.

M & L Glazed ceramic tiles coloured of size 300x200x7mm thick for works on vertical surfaces such as skirting/dados of economy class B-III conforming to IS-13712 etc set and jointed in neat cement slurry and pointed in coloured cement to match including rendering 10 mm thick in cement mortar 1:4, as in backing layer without using extra cement complete all as specified.

S&F in repair counter top wash hand basin circular type, including waste pipe, coupling and cutting for fixing in slabs complete with cabinet all as specified and directed. Make : JAQUAR Cat part No JDS-WHI-25901 or equivalent in ROCA/KOHLER/ HR JOHNSON.

M&L granite (of any type) work(table rubbed and polished ) in steps, jambs ,pillars, window cills cocking platform and like in cement mortor(1:4) including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shed of granite.

S&F in repair soap dish, vitreous china white, approximate size 160 x 160 x 90 mm complete all as specified.

S&F white toilet paper holder with flat recessed type stainless steel complete all as specified & directed.

S&F towel ring of PTMT fixed with and including chromium plated brass screws and wooden/ plastic cleats(Mini weight 90 gms), complete all as specified.

S&F in repairs, aluminium anodised, tubular towel rail, 20mm dia, D type, 60cm long between flanges, all as specified and directed by Engr-in-Charge.

S&F 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified.

S&F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified.

S&F 100 mm dia CI Bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified.

Taking down carefully old point wiring (Light / Fan/ Socket/ Bell Point ) with aluminium/ copper conductor cable complete including fittings such as ceiling rose, holders, regulators, bell, switch and socket from existing concealed conduits and making good the disturbed surface of wall/ floor complete to match with the existing surface/finishes all as specified.

Taking down/out unserviceable point wiring (but except Fittings & Fixtures viz Switches, Ceiling Roses, Pendants, Regulators, Sockets, Light Fitting, etc.) from the Existing Point Wiring (Light, Fan, Socket or Power) without disturbing PVC Casing & Caping/PVC or Steel Conduits/ERW Conduit of any description, complete all as specified and as directed.

Material & Labour for point wiring with 1.5 sq mm (Nominal area) FRLS, PVC insulated, 1100 volt grade, multistranded copper conductor cable un-sheathed in & including PVC casing caping with fittings/accessories and PVC insulated, FRLS, 1100 volt grade un sheathed copper conductor of 1.5 sqmm size cable earth wire connected to common earth including closed recessed wooden terminal boxes of suitable size made of 2nd class hard wood for mounting of switches, sockets, fan regulators etc with 3mm thick plastic laminated sheet of Hylam/Mica make as top cover complete all as specified for the following:-

(a) One light point/ one fan point/ Bell Point controlled by one switch

(b) One 3 pin socket outlet, 5 Amp independent

(b) One 3 pin socket outlet 5 Amps on same board with other switches

All as per item No 67 above but for point wiring for power point with 4.00 Sqmm FRLS PVC insulated unsheathed copper cable 1100 Volt grade drawn through and including PVC casing caping heavy duty ISI marked /heavy duty conduit ISI marked as required at site alongwith accessories with 4.00 Sq mm FRLS PVC insulated unsheathed copper conductor cable as earthing and connected to common earth on independent board all as specified and directed.

Supply and Fixing in repair Modular switch 1 way 6 Amp,1 module , complete all as specified and directed.

Supply and Fixing in repair Modular switch 1 way 16 Amp,1 module , complete all as specified and directed.

Supply and Fixing in repair Modular Socket Outlet 6A/16Amp , 2/3 pin combined ,2 module complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repair Modular Socket Outlet 6A , 2/3 pin combined ,2 module complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing ceiling rose three terminal pvc/polycarbonate, isolated body complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repair Modular white plate with support frame 3 module complete as per sample all as directed by Engr- in- Charge

Supply and Fixing in repair Modular white plate with support frame 6 module complete as per sample all as directed by Engr- in- Charge

Supply and Fixing in repair Modular metal flush box of 3 module all as specified and directed by Engr- In- Charge

Supply and Fixing in repair Modular metal flush box of 6 module all as specified and directed by Engr- In- Charge

S&F in repairs Decorative Ultra Slim Linear LED Lighting Fixture with Extruded Poly-carbonate, Inverter LED batten with lithium ion battery with charging time 8-10 hours and backup time 4 hours, Environmental Friendly, Energy Efficient 10.0 Watt LED 6500K and connecting up with and including Copper Conductor Cable of size 23/0.193 multi-stranded, 3 Core from Ceiling Rose to Light Fitting, connecting up and Fixing-in-repairs, complete all as specified and as directed MAKE : HAVELLS Cat Part No. LHEXACP7FNW010 or equivalent in PHILIPS/BAJAJ/ SURYA

S&F in repairs Decorative Ultra Slim Linear LED Lighting Fixture with Extruded Polycarbonate, Environmental Friendly, Energy Efficient 18 Watt LED 6000K and connecting up with and including Copper Conductor Cable of size 23/0.193 multi-stranded, 3 Core from Ceiling Rose to Light Fitting, connecting up and Fixing-in-repairs, complete all as specified and as directed MAKE : HAVELLS Cat Part No. LHEXBLP7PN1W018 or equivalent in PHILIPS/BAJAJ/ SURYA

S&F in repairs Decorative Ultra Modern LED 42W recessed panel comprising inbuilt occupancy with photo sensor with driver complete all as specified and as directed. MAKE : HAVELLS Cat No VENUSNEOHE2x2R42WLED840SMARTPLUS or its Equivalent PHILIPS/BAJAJ/ SURYA

S & F in replacement sheet metal Enclosure, Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp, 240 volts complete all as specified and directed.

S & F in replacement pressed sheet metal enclosure (MCB DB), single phase and neutral with 200 Amps rated bus bar, double door type, 240 volts complete for 8 way complete all as specified and directed.

M&L in repair for MCB single pole, 6 to 32 Amp 240 volt C curve 10 KA, IP 20 complete all as specified and directed incl taking down old one.

M&L in repair for MCB single pole & neutral 240 volt C curve 10 KA 40 Amps capacity IP 20 complete all as specified and directed incl taking down old one.

S&F in repair two run run of single core 4.00 Sqmm for Sub Main wiring with copper conductor multistranded FR PVC insulated and unsheathed 1100Volts grade in and including PVC casing capping/ pvc conduit with fixing accessories including one run of 4.00 Sqmm copper conductor complete all as specified and directed. (Note - Two runs of 4.00 Sqmm cable, one run of 4.00 Sqmm earth cable and one run of PVC casing Capping shall be measured as one running meter.)

Deduct Credit for Demolished/Dismantled material Rs (-) 11,216.00 (Minus) as listed in Schedule 'A' Sec-II (Credit Schedule) Note : Tenderers will not quote against this item being a tentative amount, to be considered to arrive at the 'Contract Sum'.

KASHMIR FAIR DEAL SERVICES