GE863/EWS-T-53 OF 2023-24

Amount

Surface excavation not exceeding 30cm deep and avg 15 cm deep and getting out in HARD/DENSE SOIL, bush cutting near the fencing side for suitable for easy work, complete all as specified and directed.

Removal of excavated material to a distance n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point, complete, all as specified and directed.

M & L for Plain Cement concrete (1:4:8) type D-2 using 40mm well graded stone aggregate as in foundations, filling and mass concrete including sub base of floors complete all as specified & directed.

M&L plain cement concrete type C-1 (1:3:6) (using 20mm graded stone aggregates) as in plinth protections, 50 mm thick , finished even and smooth without using extra cement , with joints 10 mm wide and in full depth at corners and @ 3 metre centre to centre, filled with mastic mortar, complete all as specified and directed.

M & L for 25 mm thick plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in levelling of floor etc., complete, all as specified and directed.

M&L for walling of random rubble, stone masonry work, uncoursed, well bonded , bedded solidly hearted built in Cement Mortar (1:4), complete, all as specified and directed.

M & L for Machine pressed precast concrete inter locking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment, over new sub-base complete all as specified & directed.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

S & F rolled mild steel Fe.290(Gde-E-165), for stairs (framed) including stringers, treades, landing, railing, balusters, hand rails, etc. including cleats, brackets, etc. complete, all as specified and directed.

M & L for plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in plinth courses, kerbs, lacing courses, string courses, parapets, flooring, benching to drain, coping, concrete pillar etc. and the like including weathering, slightly rounded or chamfered on edges and throating etc., including necessary formwork, complete, all as specified and directed.

M&L coloured chequered cement concrete tiles 20cm x20cm x 25mm/ 30cm x30cm x 25mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry over and including 20 mm thick screed bed or bedding layer of Cement Mortar (1:4) in floors/paths etc., complete, all as specified and as directed.

M&L coloured chequered cement concrete tiles 20cm x20cm x 25mm/ 30cm x30cm x 25mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry over and including 10 mm thick rendering as back coat in Cement Mortar (1:4) as in vertical surface as in skirting, dados, and risers of steps etc., complete, all as specified and as directed.

M&L for Rendering 10mm thick cement mortar (1:6) on stone masonry surfaces or surface other than fair face of brickwork finished even and smooth (without using extra cement), complete, all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of dressed stone work, precast concrete articles and precast concrete block walling built in cement mortar or cement lime mortar, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness inclduding cover fillets complete all as specified and directed.

M & L for providing cement concrete Type C1 1:3:6 using 20mm graded stone aggregate as in coping complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed.

M&L for walling of squarred rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and as directed.

M&L for block masonry with solid pre-cast cement concrete blocks made out of cement concrete 1: 3: 6 type C-1, using 20 mm graded stone aggregate, any width and setting in cement mortar 1:6 complete all as specified.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Taking down cement plaster, any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M & L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement plaster 1:4 using WPC 3% by weight of cement (WPC to be measured and paid separately) and finished even and smooth (without using extra cement) complete all as specified and directed.

Supply only integral water proofing compound of approved brand/make, complete all as specified and directed.

M&L for preparation of newly plastered surface of walls and applying one coat of acrylic smooth exterior paint (weather coat) over a coat of exterior primer complete all as specified and directed.

M&L for preparation of old surfaces of wall complete removal of existing treatment, washing, rubbing down and stopping of distempered and painted surfaces of walls and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and applying a coat of plastic emulsion paint, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying plaster of paris putty of 3 mm thickness over plastered surface to prepare the surface even and smooth and applying two coats of plastic emulsion paint complete all as specified and directed.

M&L for complete removal of existing treatment, washing, rubbing down and stopping of distempered and painted surfaces of walls and applying one coat of acrylic smooth exterior paint (weather coat) over a coat of exterior primer complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coat of oil bound distemper over 3 mm thick wall care putty on walls, complete all as specified and directed.

S&F anodised aluminium snap grid of size 605 X 605 mm frame work for false ceiling including hangers 6mm dia G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed.

M&L exposed metal frame ceiling with 8mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mmX600mm grid (frame work for ceiling shall be measured and paid seprately) complete all as specified and directed.

M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick cement screed bed or bedding layer in CM (1:6), complete all as specified and as directed.

All as per Item No 34 above but as in skirting/dado over and including 10mm thick rendering in CM (1:4 ) complete all as specified and directed.

M & L for non skid coloured ceramic tiles 400mmx400xmm7 to 8 mm thick (square/rectangular), in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M&L for glazed clolour ceramic tiles of size 350x 250x 7 mm/ 450X 350X 7mm thick as in vertical surfaces/dado laid over 10mm thick rendering as back coat in CM 1:4 etc. set and jointed in neat cement slurry and pointed in coloured cement with pigment complete all as specifed and as directed.

S & F in repair 1mm thick stainless steel sink with drainage board, plugs, washers, PVC waste pipe, union, CP coupling & cantilever brackets embedded in cement and sand mortar in wall, overall size 915mmx460mm bowl size 410mmx330mmx160mm complete all as specified and directed.

M&L for 18-20 mm thick Granite (of any type and colour) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admix ture of pigment to match with shade of granite, complete all as specified & directed .

S & F in repair 18 / 19 mm thick pre-laminated particle board interior grade, pre-laminated one side with decorative choice of lamination and other side balancing white lamination as in cup board shutter fixed with screw teak wood beading all round / exposed faces complete all as specified and as directed.

S & F Continuous (piano) hinges of 30 mm width of flaps, mild steel, bright finish or electrogalvanised complete all as specified and as directed.

S&F of 75 mm long Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S & F PVC cupboard knob fixed with nut , screw and washer of mild steel bright finished size exc. 25 mm dia but n. exc. 50 mm dia (as per sample), complete all as specified and directed.

S& F in repair 750 X 600 X 200 mm thick Stainless steel Plate Racks complete all as specified and directed.

Taking down chowkats or frames not exc 1.5 sq.m each but with shutters (without taking off shutters from the frames), complete all as specified and directed.

Taking down chowkats or frames exc 1.5 sq.m but n.exc 4 sq.m each but with shutters (without taking off shutters from the frames), complete all as specified and directed.

Taking down of shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each, complete all as specified and directed.

S&F of factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded wood grain printed PVC sheet ‘C’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of wood grain PVC sheet to be fitted to the MS Frame/sealed to the stiles & rails with suitable PVC sheet beading, & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90) degree used and joined together with solvent cement, all as specified.

M&L for solid PVC door frame of size 50x47mm made out of 5mm thick wood grain printed pvc sheet reinforced with MS square tube complete all as specified and directed.

S&F 30mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, both face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed.

M&L for preparing new or previously untreated surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Taking down steel window/ventilator including guard bar and removal from site, complete all as specified and directed.

S&F powder coated (Thickness of powder coating not less than 50 micron) anodised aluminium door shutters, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges, suitable handles (2 no. in each door), complete all as specified and directed.

S&F powder coated (Thickness of powder coating not less than 50 micron) anodised aluminium window and ventilator shutters, side hung type/sliding without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

S&F powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and directed.

M & L for preparation of new or previously untreated surfaces of steel of any description, over 10 cm in width or girth not otherwise described applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer, complete all as specified and directed.

M & L for preparation of old surfaces of steel of any description, over 10 cm in width or girth not otherwise described applying one coat of synthetic enamel paint (ordinary tint), complete all as specified and directed.

M&L 75 mm thick PCC (1:3:6) C-1 using 20mm graded stone aggregate as in floor, plinth protection etc. finished even and smooth without using extra cement, with joints 10 mm wide and in full depth at corners and @ 3 metre centre to centre, filled with mastic mortar, complete all as specified and directed by Engineer-in-Charge.

S&F wire netting of stainless steel wire 1.4 mm dia fixed with tinned tacks of stainless steel wire staple and mesh size 12 mm, complete all as specified and directed.

S&F 4.00 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

S & F 300mm length aluminium alloy, anodised, sliding door bolt hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed.

S & F 150mm Aluminium handles, cast type, anodised, complete all as specified and directed.

S & F 125mm Aluminium handles, cast type, anodised, complete all as specified and directed.

S & F 150mm aluminium, anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed.

S&F 200 mm aluminium, anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed.

S & F 100 mm butt hinges, medium weight, cold rolled mild steel and fixed, complete all as specified and directed.

S & F 100 mm butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified and directed.

S & F mild steel 300mm ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed.

S & F brass chromium plated tubular towel rail 20mm dia incl brackets complete all as specified and directed.

S & F floor door stopper of alluminium alloy body and toungue anodised with hard drawn steel spring overall length of cover plate 140mm complete all as specified and directed.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in wall mount glass corner shelf of suitable size, complete all as specified and directed.

S&F in repair soap dish, vitreous China white, approximate size 160x 160x90mm , fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) complete all as specified and directed.

S&F Hat pegs, brass solid body, 125mm to 175 mm complete all as specified and directed.

S&F in repair MS chromium plated peg set of five fixing with wall complete all as specified and directed.

Taking up or down 25mm bore steel water tubing and connections including cleaning for refixing or removing to store, complete, all as specified and directed.

Taking up or down 20mm bore steel water tubing and connections including cleaning for refixing or removing to store, complete, all as specified and directed.

Taking up or down 15mm bore steel water tubing and connections including cleaning for refixing or removing to store, complete, all as specified and directed.

S & F 25 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors, complete, all as specified and directed.

S & F 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors, complete, all as specified and directed.

S & F 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors, complete, all as specified and directed.

S&F in repairs Floor mounted One Piece Water Closet Square With Soft Close Seat Cover and jet spray, complete all as specified and as directed. Make: Cera Cat part No OPT006 or equivalent.

S&F in repairs Toilet paper holder with flat recessed type stainless steel fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.

S&F in repairs , first quality , wash basins, vitreous china, white, flat back of size 550x400mm , including pillar tap cast copper alloy with capston heads chromium plated screwed down high pressure with or without hot or cold with long screws shanks and fly nuts screwed for iron pipes including brackets and cutting for and pinning in ends of brackets or erecting stand 32mm dia waste fittings, brass, chromium plated with long screwed shanks and fly nuts, 32mm dia HDPE waste pipe and including new brackets, complete all as specified and directed.

S&F in repair 15 mm dia Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as spcified and directed.

S & F in repair Health Faucet ABS Body with Wall Hook and 1-Meter Stainless Steel Chrome Finish Braided Rubber Hose - Chrom, complete all as specified and directed. Brand Cera Cat part No F8030103 or equivalent.

S&F in repairs two way fancy type chromium plated 15 mm bore bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F in repairs fancy type chromium plated, 15 mm bore bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F stop valves of cast copper alloy, 15mm bore fancy type chromium plated, screwed down, high pressure screwed both ends for iron pipe or for unions , fixed in repairs, complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F cast iron floor trap 100 mm dia, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified & directed.

Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 110mm bore, complete all as specified and directed.

Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 75mm bore, complete all as specified and directed.

S&F of 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed on wall with MS clamp, complete all as specified and directed.

S&F of 110mm PVC (SWR) pipes single socketed in any length with rubber rings joints laid in trenches or in floors, complete all as specified and directed.

S&F of 75 mm PVC (SWR) pipes single socketd in any length with rubber rings joints laid in trenches or in floors, complete all as specified and directed.

All as per item No 99, above but fixed in wall with MS clamp, complete all as specified and directed.

S&F PVC (SWR) branch pieces single socketed Y equal or unequal 110mm, complete all as specified and directed.

S&F PVC (SWR) bends any radius 110mm, complete all as specified and directed.

S&F PVC (SWR) bends 75mm dia with oval acess door, complete all as specified and directed.

S&F PVC (SWR) vent cowl 110 mm, complete all as specified and directed.

S&F roof trusess (framed), verticle pole, trussed ,purlin, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, chanel or flat section ) including distance pieces,cleats etc confirming to Fe 410-W (grade -E-250) quality A, complete all as specified and directed.

M&L for Precast Reinforced cement concrete 1:3:6, type C1 (Using 20 mm graded stone aggregate) as in landings, cover slabs (for manholes etc.), shelves and similar articles with plain faces and set in cement mortar 1:4 complete all as specified & directed. Note: Rates for S&F of TMT bars measured and paid separately.

S&F mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing wire complete all as specified & directed.

S&F mild steel TMT 6 mm to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for stirrups, hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips complete all as specified & directed.

S&F chromium plated bath cabinet fixed with and including chromium plated brass screws and wooden cleats size 355 mm x 455 mm, complete all as specified and directed. Make : Prayag/Polytuff or equivalent

S&F in repairs harrison rails mild steel aluminium anodised with fixing brackets, stops etc, complete all as specified and directed.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified & directed.

Returning filling in soil including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified & directed.

M&L cement concrete (1:5:10) type E-2 using 40mm graded stone aggregate for foundation filling, mass concrete and sub base of floors complete all as specified & directed.

Dismantling post or struts (wood, steel, or RCC) any section, including taking out embedded portion in concrete and making good the disturbed ground, complete all as specified and directed.

Dismantling barbed wire fencing any type, complete all as specified and directed. Note: Each line of wire shall be measured separately.

Dismantling fencing wire mesh, any type, complete all as specified and directed.

Excavating in post holes (or similar holes), each not exc. 0.5 cum, getting out in hard/dense soil and removing surplus soil to a distance not exc. 50 m, complete all as specified and directed.

M & L for Plain Cement concrete (1:3:6) type C-2 using 40mm well graded stone aggregate as in foundations, filling and mass concrete including sub base of floors complete all as specified & directed.

S&F mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh, etc.), including all necessary drilling, bolting or riveting, etc., and similar work confirming to Fe-290 Gde E-165, complete all as specified and directed. Note: Surfaces of steel in contact with or embedded in concrete shall be treated with tar/coal black paint as specified in SSR Part-I and sanded before being built in and quoted rate are deemed to be included for this provision and nothing extra shall be entertained on this account.

Suppy only Chain link MS Galvanised fencing, any size or type complete all as specified and directed.

Fixing only chain link fencing incl line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc., incl provn of binding wire complete all as specified and directed.

S&F in repairs galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing in any type of standard rails, straining bolts incl securing or tying any crossings with provn of MS wire staples or steel pins, etc., complete all as specified and directed.

S&F mild steel round bars 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beams, slabs, etc., hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips, quality confirming to Fe-410-W (Gde E-250) quality-A, or Fe-290 (Gde E-165), complete all as specified and directed.

M&L mild steel bolts machine made 10mm dia of neck hexagonal or square head at one end and screwed at the other or screwed at both ends, each screwed end to be fitted with washers and one hexagonal or square nuts not exc. 5 cm long, diameter of neck not exc. 12 mm, complete all as specified and directed.

M & L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement plaster 1:4 finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for preparation of newly plastered surface of walls and applying two coats of cement base paint, complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quions, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.

Taking down wall panelling and similar work, complete all as specified and directed.

M&L for pre-laminated exterior grade board 9mm thick one side laminated board for wall panelling incl all necessary fittings and fillets complete all as specified and directed.

M&L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification complete all as specified and directed.

M&L Solid PVC Wall Lining consisting of 5mm thick single side pre-laminated PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as per specified and directed.

M&L for preparation of newly plastered surface of walls and applying two coats of cement base paint over a coat of cement primer, complete all as specified and directed.

M & L for plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in roof kerbs or mud stops, round on edges, including necessary formwork, complete, all as specified and directed.

S&F mortice brass lock vertical type size 100mm with 4 levers, complete all as specified and directed.

S&F aluminium (die cast ) body door closer hydraulically regulated designation No 3 universal type, suitable fo door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg. C omplete all as specified and as directed.

S&F aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed

Supply and fabrication of framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F in repairs floor mounted modular cabinet with wash basin 24 inch x 18 inch complete with all accessories like waste pipe, PVC connection etc., complete all as specified and as directed.

S & F in repair Bidet spray (Health faucet) with 1 meter PVC tube and holder, complete all as specified and directed.

S&F PVC (SWR) junction single 110 mm, (Single T) equal or unequal, complete all as specified and directed.

Dismantling water tanks and removing to store exc. 500 but n. exc. 1000 ltrs., complete all as specified and directed.

S&F 1000 ltr capcity rotational moulded polyethylne water storage tanks (cylindrical vertical with closed top) triple layer duly provided with necessay fittings/fixtures for connecting inlet, outlet, washout and overflow pipes, noisted incl ball brass valve, high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule 20 mm bore and fixed in position complete all as specified and directed.

S&F PVC vinyl decorative wall paper for the wall surface incl glue or adhesive for fixing in any desired colour or design, complete all as specified & directed.

M&L for 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC/aluminum frame as per specifications, complete all as per specified and directed.

Repair to iron gate of any shape & size by replacing washers, hooks, hold fasts etc. and making the same in serviceable condition for smooth functioning during open and close, complete all as specified & as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc., complete all as specified and directed.

M & L for point wiring using approved colour coding as per IS by using FRLS PVC insulated 1.5 Sqmm multistranded,1100 volt grade copper conductor cable unsheathed type, alongwith 1.5 Sqmm FRLS PVC insulated stranded copper conductor cable for continous earthing in & incl PVC casing & caping with accessories having ISI mark fixed on wall surfaces / ceiling including provision incl suitable modular bottom sunk type pressed steel terminal box and suitable modular top cover with frame and No of modules for fixing switches sockets etc. for one light point controlled by one switch, complete all as specified and directed.

All as per item No. 148 here-in-before but for one 3 pin socket outlet 5 Amps on the same board with other switches with cable of size 1.5 Sqmm, complete all as specified and directed.

All as per item No. 148 here-in-before but for 3 pin socket outlet 5 Amps on the independent board with cable 1.5 Sqmm size, complete all as specified and directed.

All as per item No. 148 here-in-before but for one 3 pin socket outlet 15 Amps on the independent board with copper cables of 2.5 Sqmm size, complete all as specified and directed.

Supply and fix Modular switch 1 way 6A, 1 module, 240 volts, complete all as specified and directed.

Supply and fix Socket, 6A - 2/3 pin combined 2 module, complete all as specified and directed.

Supply and fix Modular switch 1 way 16A, 1 module, 240 volts, complete all as specified and directed.

Supply and fix Socket 6A/16A - 2/3 pin combined 2 module, complete all as specified and directed.

Supply and fix of Ceiling Rose, 3 phase polycarbonate isolated body including junction round PVC cover plate with brass screw/nuts, complete all as specified & directed.

Supply, laying LT UG XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 Sq mm 2 core as per IS specifications laid through GI pipe/on floor/wall complete all as specified and directed.

Supply and laying of GI pipe light grade galvanized with all fittings laid in trenches for cable protection of 50 mm bore all as specified and directed.

M&L for dismantling of service wire 10 sqmm 2 core with all accessories incl service bracket complete all as specified and directed.

M&L in replacement of earthing complete with galvanized steel earth plate electrode 60cmx60cmx6.0mm thick, buried directly in ground(earth pit not less than 2.25metres deep below normal ground level) with top edge of the plate not less than 1.5meter below normal ground level ,connected to and including using galvanized iron wire of 4.0 mm thick as earthing lead by means of bolts nuts, check nuts and washers of galvanized iron or steel .earth plate surrounded by alternate layers packed with char coal dust and common salt ,15cm thick and 15cm wide all around bottom and top and watering pipe 20mm bore of GI medium grade with funnel, wire mesh and 15mm dia GI protection pipe light grade all as shown in electrical plate no-3 of SSR part-I and connected to earthling test point, and including testing on completion all as specified location and as directed by Engineer-in -charge. Note: Suitable quantity of charcoal, common salt, funnel, GI pipe required for watering, pit & CI pit cover etc is deemed to be included in quoted rate and lead wire used beyond 7.5m from pit cover will be measured saparately.

S&F in replacement LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

S & F in replacement of sheet metal enclosure double door for DBs single pole and neutral for 8 way 240 volt with 200 amps rated bus bar complete with bus and neutral link, complete all as per specified and directed.

S&F in repalcement of MCB SPN 40 Amps ,10 KA 230 Volts ,50 HZ complete all as specified and as directed

S&F in repalcement of MCB SP 6-32 Amps ,10 KA 230 Volts ,50 HZ complete all as specified and as directed

S&F in replacement of LED lights fitting 1x 20W (4 ft), 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed.

All as per item No. 165 here-in-before but of 10 watt (2ft), complete all as specified and directed.

S&F in replacement of Lamp holder, PVC/Polycarbonate type with back plate complete all as specified and directed.

S&F in replacement of LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

S & F switch piano type 5 Amp, 230 Volt, flush type single pole one way complete all as specified and directed.

S & F socket outlet 3 pin 5 Amp 230 Volt flush type, complete all as specified and directed.

S & F switch piano type 15 Amp, 230 Volt, flush type single pole one way, complete all as specified and directed.

S & F socket outlet 3 pin 15 Amp 230 Volt flush type, complete all as specified and directed.

Supply and fix exhaust fan, steel body, AC, single Phase, 230V of size 300mm sweep with, blades, and frame and louvers, complete, all as specified and directed

Net Contract Sum will be after deducting Sch Of Credit of Rs. 56527.70.

M/S Shamsher Negi Dewa

R B TRADERS