MOEI and fans ic compound lighting for 96 DA flats for Mayur Vihar Ph-II, Delhi. Replacement of burnout MCCB, Street light fittings and other accessories

Select, At Par, Excess (+), Less (-) IOCL

Tender Inviting Authority: Executive Engineer(E) PWD M-253

Name of Work:- MOEI and fans i/c compound lighting for 96 DA flats for Mayur Vihar Ph-II, Delhi. (SH:- Replacement of burnout MCCB, Street light fittings & other accessories)

NIT No.:103/EE(E)/PWD M-253/2025-26 Estimated Cost:-12,48,016/-

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Sub Head Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Rs. P TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words

1 DSR-2022 ITEMS Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required. 200 A, 25 KA,TPMCCB Each 11586 374800 Excess(+) Full Conversion INR

2 250 A, 25 KA,TPMCCB Each 13647 374800 Excess(+) Full Conversion INR

3 LED Batten light (System lumen efficacy ≥105 <120 lm/Watt). Supplying, Installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 °C to 40 °C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10%, P. F.≥0.95, IP20, CRI >80, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). 36 watt Each 678 374800 Excess(+) Full Conversion INR INR Sixteen Thousand Nine Hundred & Fifty Only

4 LED Down lighter (SMD Type) (System lumen efficacy ≥ 105 < 120 lm/Watt) Supplying, Installation, Testing & Commissioning of LED Recessed/ surface Down lighter (Round/ square/ Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -50C to 400C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5%), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K /4000°K / 5700°K / 6500°K (As per ANSI Bin), SDCM (Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be confirming to relevant BIS standards. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 and <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C) Powder coated die cast /Extruded aluminium Body including trim 12 -15 watt Each 715 374800 Excess(+) Full Conversion INR INR Seventy One Thousand Five Hundred Only

5 LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy ≥105 <120 lm/Watt) Supplying, installation, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMIEMC As per CISPR -15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin),SDCM (Standard Deviation Colour Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output .LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). 100 watt Each 374800 Excess(+) Full Conversion INR INR Fifty Thousand Eight Hundred & Sixty Only

6 Supplying and fixing glass reinforced SMC (sheet moulding compound) cable junction box of size 250 x 200 x 105mm with IP55 ingress protection on wall surface/pole using suitable clamps/fastners, 1 No. 15/16A 4 way terminal block, 1 No. 6 A SPMCB with din rail, including connections etc. as required. Each 2120 374800 Excess(+) Full Conversion INR INR Forty Two Thousand Four Hundred Only

7 Supplying ,Installation, testing and commissioning of 10 W LED Bulk head Fitting made out of PDC aluminium housing with polycarbonate diffuser & integrated electronic driver having system lumen efficacy: ≥80 lm/W, PF: ≥0.90, CRI: ≥80, Colour Temperature: 5700K/6500K, LED life ≥ 50,000Hrs at i/c connection with 1.5 sq mm FRLS PVC insulated connection sq mm FRLS PVC insulated copper conductor, single core cable and earthing complete as required. Each 1377 374800 Excess(+) Full Conversion INR INR Two Lakh Sixty Four Thousand Three Hundred & Eighty Four Only

8 Supplying, laying, & fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of the following size on the wall surface as required. 3 x 10 sq. mm mtrs 358 374800 Excess(+) Full Conversion INR INR One Lakh Forty Three Thousand Two Hundred Only

9 3.5 x 95 sq. mm mtrs 1502 374800 Excess(+) Full Conversion INR INR Forty Five Thousand &Sixty Only

10 Providing and fixing ISI marked/ PESO approved CO2 gas type fire extinguisher of following capacity and rating confirming to IS: 15683 with extruded aluminium can having spray painted exterior, discharge EPDM hose pipe & horn, pressure gauge, carrying handle, controllable discharge mechanism etc on wall surface using suitable mounting accessories complete as required. 4.5 kg, 55B, 13s discharge time Each 12940 374800 Excess(+) Full Conversion INR INR One Lakh Twenty Nine Thousand Four Hundred Only

11 Supplying and fixing Timer for street light including connection etc. as required. Each 374800 Excess(+) Full Conversion INR INR Thirty Nine Thousand Five Hundred & Eighty Only

12 Supplying and fixing Agni Shield Alloy Steel Battery Powered Emergency Light with Exit Sign including connection etc. as required. Each 3568 374800 Excess(+) Full Conversion INR INR Thirty Five Thousand Six Hundred & Eighty Only

13 Supplying and fixing following rating & Poles, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load DP MCB complete with connections, testing and commissioning etc. as required. 63 A DP MCB Each 1632 374800 Excess(+) Full Conversion INR INR One Lakh Fifty Six Thousand Six Hundred & Seventy Two Only

Total in Figures Twelve Lakh Forty Eight Thousand &Sixteen Only

Please Enable Macros to View BoQ information