REPAIRS TO JOINERY, PLUMBING WORKS AND CERTAIN B/R REPAIRS IN HQ SWAC BUILDING AND AUDITORIUM AT VAYU SHAKTI NAGAR CHILODA

Amount

Demolition of Brickwork or stone/boulder masonry, built in CM or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles all as specified and directed.

Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) all as specified and directed.

Demolition of RCC of any description & in any position not otherwise specifically provided for (reinforced) all as specified and directed.

Removing building materials etc.to a distance of 1.00 Km or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination all as specified and directed.

M&L for RCC M-25 design mix with using 20mm graded stone agg as in chajjas etc all as specified and directed.

Formwork to rough finish surfaces of concrete chullah hoods, chajjas, troughs and similar items incl edges etc all as specified and directed.

MS TMT bars 6mm to 8mm dia, cut to length bent to shape required including cranking, bending spirally for hooking for columns, hooking ends and binding with and including mils steel wire (annealed) not less than 0.9mm dia or securing with clips.all as specified and directed.

M&L MS TMT bars 10 mm and above , cut to length ,bent to shape required , including cranking , bending , spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in reinforcement all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.all as specified and directed.

M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:6) finished even & smooth (without using extra lime or cement) all as specified and directed.

M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4) finished even & smooth with 3% wpc (without using extra lime or cement) all as specified and directed.

M&L for preparing of previously untreated surfaces of walls and applying two coats of distemper oil emulsion over a coat of primer all as specified and directed.

M&L for preparing previously unterated surfaces of wall and applying two coats of Acrylic Emulsion (weather coat) painting over a coat of primer all as specified and directed

M&L for preparing old decorated surfaces of ceiling and applying one coats of white wash complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surfaces 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 10mm thick backing coat in cement mortar 1:4, complete all as specified and directed.

Dismantling and removing of existing sunken floor of WC and filling again 1:2:4 cement conrete after that applying 15mm thick plastering in CM 1:3 of internal surface with WPC. Applying pidilite 20 micron endura atul (crack powder,endura B-30,Flast Flex, Microsil 30C,Epoxy Lacrete), tiles and WC shall be measured and paid separately) all as specified and directed.

M&L for Non - skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 SQM but not exceeding 0.18 SQM, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match,laid over and including 15mm thick screed bed in CM 1:6.all as specified and directed.

M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor etc.all as specified and directed.

All as item No. 19 above but on vertical surfaces/skirting. all as specified and directed.

M&L for Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors all as specified and directed.

Demolition of stone slabs and tiles of any description, laid bedded and pointed in any mortar.all as specified and directed.

M&L for 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over and including cement screed in CM 1:4, 15mm thick and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

Demolition of PCC of any description & in any position not otherwise specifically provided for (unreinforced) all as specified and directed.

M&L 40mm thick PCC type B-1, (1:2:4) using 20mm graded stone aggregate as in sub floors, floor bases,or for water tank bases on slab and paving etc complete Finished even & smooth using extra cement all as specified and directed.

S&F in repairs vitreous china white wash hand basin oval type over/under counterwash basin 560x470mm complete all as specified and directed

S&F in repairs 32mm brass chromium plated waste coupling for wash hand basin all as specified and directed.

S&F in repairs Vitreous China urinals,half stall complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) all as specified and directed.

S&F in repair Cast iron 100mm bore Spun cast soil, waste & vent pipes, in any length with or without ears with cement joints, fixed to walls all as specified and directed.

S&F in repair Cast iron 75mm bore Spun cast soil, waste & vent pipes, in any length with or without ears with cement joints,fixed to walls all as specified and directed.

S&F in repair Cast iron 75mm bore Bends (any radius), diminishing pieces or tapers (larger bore measured) all as specified and directed.

S&F Cast in repair iron 100mm bore Bends (any radius), diminishing pieces or tapers (larger bore measured) all as specified and directed.

S&F Cast in repair iron 75mm bore cowls all as specified and directed.

S&F in repair Cast iron 100mm bore cowls all as specified and directed.

S&F in repair Cast iron floor trap 75mm dia, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) all as specified and directed.

S&F in repair Cast iron Nahani trap 75mm dia, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) all as specified and directed.

S&F in repairs PVC (SWR)110mm bore pipes, single socketed in any length with rubber ring joints fixed to wall all as specified and directed.

S&F in repairs PVC(SWR) bends 110mm bore any radius all as specified and directed.

S&F in repairs PVC P trap 125/110mm all as specified and directed.

S&F in repairs Vitreous China squatting pan of pattern `long pan', size 580mm white with `p' or `S' trap, front or back inlet & foot rests, any pattern (exclusing flushing cistern & flush pipe) all as specified and directed.

S&F in repairs grating doom 150x150mm of brass chromium plated all as specified and directed.

Taking up or down steel tubing pipe and connections 15mm bore all as specified and directed.

S&F 15mm dia tubes ‘Medium grade’ galvanized with all fittings and fixed complete to walls and ceiling or laid in floors, all as specified and directed.

Refixing old steel tubing & connections in new or old position (Walls, ceiling, floors, etc.) of 15mm bore all as specified and directed.

S & F in repairs Bib taps, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed to 15mm bore pipe all as specified and directed.

S&F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium platedscrewed down highpressure, with or without lettered 'Hot' or 'Cold' withlong screwedshanks and fly-nuts,screwed for iron pipe and fixed to 15mm bore pipe all as specified all as specified and directed.

S&F in repairs Pillar taps with Aquisense Sensor, cast copper alloy, with capstan heads, chromium platedscrewed down highpressure, with orwithout lettered 'Hot' or 'Cold' withlong screwedshanks and fly-nuts,screwed for iron pipe and fixed to 15mm bore pipe all as specified all as specified and directed.

S&F in repairs sensor, for urinal chromium platedscrewed down highpressure, with or without lettered screwedshanks and fly-nuts,screwed for iron pipe and fixed to 15mm bore pipe all as specified all as specified and directed.

S&F in repairs CP angle cock 15mm bore all as specified and directed.

S&F in repairs 10 litres capacity PVC valveless symphonic action type, flushing cistern, low level, white, with inlet, ball valve float handle including brackets all as specified.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600 mm all as specified and directed.

S&Fin repairs 32mm PVC waste pipe for wash hand basin/urinal/sink 600mm long complete all as specified

S & F and repair Brass chromium plated 32 mm bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed all as specified and directed.

S&F in repair Brass chromium plated Tubular towel rail 20mm dia, D type, 60cm long between flanges all as specified and directed.

S&F in repairs Toilet paper holder all as specified and directed.

Removal of blockage in sewage line from WC / floor trap to first manholes, gully trap, etc with sectional / flexible rod or steel or bamboo or through mechanical sewage cleaning apparatus and finally washing with fresh water complete all as directed by Engr-in-Charge.

S&F in repairs 5.50mm thick sheet glass ordinary quality alongwith EPDM rubber all around glass edges exc 0.5 Sqm in each pane. all as specified and directed.

S & F in repairs for aluminium anodised barrel tower bolt 150mm long extruded section all as specified and directed.

Ditto all as per item No 58 herein before but 200mm all as specified and directed.

Ditto all as per item No 58 herein before but 100mm all as specified and directed.

S&F in repairs Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy.

S&F in repairs stainless steel butt hinges medium weight cold rolled of size 100mm by welding to existing frame all as specified and directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified and directed.

Repairs to aluminium doors, windows and ventilators including taking down refixing in same opening after changing glass pane/ aluminium sections as required.(Note:- Aluminium sections/glasss panes shall be measured and paid seperately) all as specified and directed.

Supply only aluminium sections suitable for doors, windows and ventilators for item No 64 herein before to match all as specified and directed.

Supply only 3.00mm thick figured glass suitable size of window for item No 64 herein before to match all as specified and directed.

S&F aluminium anodized door shutter, aluminium section weighing not less than 0.55Kg/m including necessary jointing cleats, glazing clips rubber neoprene packing including aluminium anodized snap beading screw etc. complete all as specified and directed. (a) 150mm handle - 02 Nos (b) Stainless steel hinges 100mm - 03 Nos (c) Mortice lock in built 3 lever - 01 No in each shutter Note:- Glass shall be measured and paid separately.

S & F and repair 4 levers Mortice lock vertical type, size 100mm all as specified and directed.

S & F in repair position SS Railing with necessary accessories, Top horizontal 50 mm SS Pipe 01 No's ,20 mm SS Pipe 03 No's, 40 mm vertical SS round Pipe for pole 90 CM Height all as specified and as directed by Engr-in-Charge.

S&F in repair door closer hydraulically regulated designation No 3 universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed. all as specified and directed.

Taking down & Removing to Store Chowkats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. all as specified and directed.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC Sheet rainforced with MS square tube all as specified.

S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section. all as specified and directed.

S&F Butt hinges 100mm size, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type B-21 all as specified and directed.

S&F Aluminium handles 100mm size, cast type, anodised all as specified and directed.

12 mm thick Prelaminated particle board, exterior grade, prelaminated both side decorative choice lamination fixed with aluminium frame work all as specified and directed.

S&F in repairs 500Ltrs capacity double layer rotational moulded polythene water storage tanks(Cylindrical vertical with closewed top) hoisted and fixed on roof in position over existing PCC platform including all fittings such as connection pipe pieces with GI tank nipplle for inlet, outlet, washout and over flow etc and including fixing only ball valves complete all as specified and as directed

Fixing only Ball valve up to 40mm bore obtained from dismantling all as specified and directed.

S&F in repair stainless steel fancy type handles of size 200mm all as specified and directed.

S&F in repairs sinks with drainage board made of high grade stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified and directed.

S & F and repair health faucet with flexiable stainless steel hose and hook all as specified and directed.

S & F in repair vitreous china wash down water closet pan (pedestal pattern ) wall mounted (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified.

S&F in repair Cylindrical Lock lock 6 levers best quality with S S and duplicate keys for built in Wooden door. all as specified and directed.

Cleaning and removing all scale and dirt,etc.from 500 litres tanks and from mouth of circulating pipes,.etc including disconnecting existing tanks,setting aside (or lowering if required) for cleaning etc.and reconnecting and refixing in position. all as specified and directed.

M & L for repairs to wall cracks by cutting grooves and filling with cement mortar (1:3) using of apoxy rexin (conbextra EP-10(MS) of fosrock or equivalent of pilitile. all as specified and directed.

Taking out old existing roof treatement and removing debris at a distance exceeding 250 mtr but not .exceeding 500 mtr all as specified and directed.

M&L for 40 mm thick PCC (1:3:6) type C-0 (using 12.5mm graded stone aggregate) as in padding. all as specified and directed.

M&L for rendering 10mm thick cement plaster with water proofing compound @ 3% of weight of cement on fair faces of concrete surfaces in CM 1:3 finished surfaces even and smooth without using extra cement. Note:- Water proofing compound shall be measured and paid separately.all as specified and directed.

M&L for preparing clean and dried plastered surface and applying a coat of oil based bitumen primer conforming to IS 3384-1986 @ 0.30 litrs/sqm and then laying APP polymer modified membrane (mineral finished) 3mm thick with non woven polyster reinforced membrane (3.50 kg/sqm) having thermal insulation on upper side of membrane by torch application method to the entire surface all as specified and directed by Engineer-in-charge.

Supply only integral water proofing compound ISI marked.all as specified and directed.

Dismantling of ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets all as specified and directed.

M&L for Anodised aluminium snap grid frame work for false ceiling Size of grid 605 x 605mm all as specified

M&L for Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions.

S & F in repair position glass bricks of approved make of size 190X190X80mm with white cement (1:1) at all heights, with necessary PVC frame etc all as specified and as directed by Engr-in-charge.

S&F in repair for colur glasss structural Glazing including 6 mm glass all fittings at any heights, with Aluminum frame and bracket etc all as specified and as directed by Engr-in-charge.

Demolition of one way trellis work (Jafri), including taking as under of battens in trellis (posts and rails shall be measured separately)

M&L for providing 50mm thick precast cement concrete type B-0 (1:2:4) using 12.5 mm graded aggregate Set in CM (1:4) louvres and jallies, 50mm thick (measured solid), including all mouldings but excluding frame complete.

Agarwal and Company

divyarsh entrprise

Ramdev and Sons

Shree Builders