REPAIRS TO WALL, FLOOR, STAGE AND SHED OF O. F. CLUB IN ESTATE AT O. F. CHANDA.

Amount

Cat (A) -Items to be supply and fixing

Demolition of Concrete of any description and in any position not otherwise specifically provided for including removal of rubbish off from the premises at a distance not exc. 100 mt. from starting point etc. complete all as per direction of Engineer-In-Charge

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including removal of rubbish off from the premises at a distance not exc. 100 mt. from starting point etc. complete all as per the direction of Engineer-In-Charge

Dismantling floor or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc. complete all as per direction of E-I-C.

Demolition/Dismantling of reed, lathing, single or double, including battens etc. complete all as per the direction of Engineer-In-Charge

Taking down cement plaster on brickwork or concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc. complete all as per direction of Engineer-In-Charge

Taking down damaged doors with choukats and shutters (without taking off shutters from the frames) not exc.1.50 Sqm, etc. complete all as per the direction of Engineer-In-Charge.

Taking down damaged windows with choukats and shutters (without taking off shutters from the frames) exc.1.50 Sqm but not exc. 4.0 sqm, etc. complete all as per the direction of Engineer-In-Charge.

M & L for excavation over areas in soft/loose soil in floor, getting out the spoil & deposited at a distance not exc. 50 mts. from starting point etc. complete all as per direction of Engineer-In-Charge

Excavation in trenches in soft / loose soil, not exceeding 1.5 mt. wide and not exceeding 1.50 mt. in depth for foundation & getting out the soil etc. complete all as per direction of Engineer-In-Charge.

M & L for moorum filling in floors & paving, laid in layers not exceeding 15 cm thick in each layer, spread, leveled, watering, & rammed, level the surface to a true plain surface etc. complete all as per direction of Engineer-In-Charge.

M & L for hardcore or broken stone of gauge not exceeding 63mm, deposited, spread, leveled in layers not exceeding 15 cm thick, watered & leveled to a plain surface etc. complete all as per the direction of Engineer-In-Charge

M & L Cement concrete in foundation, Type-C-2 1:3:6 (40 mm graded aggregate) for filling and mass concrete as in foundation, compaction, curing etc. complete all as per direction of Engineer-In-Charge

S & F TMT bars 10 mm dia. & over, ISI mark, cut to length, bent to shape required, including cranking, binding with mild steel wire (annealed) not less than 0.9mm dia. etc. complete all as per direction of Engineer-In-Charge.

S & F TMT bars 6 to 8 mm dia., ISI mark, cut to length, bent to shape required, including cranking, binding with mild steel wire (annealed) not less than 0.9mm dia. etc. complete all as per direction of Engineer-In-Charge.

M & L for RCC Foundation (20mm graded aggregate) for footing, compaction, curing etc. complete all as per direction of Engineer-In-Charge.

Formwork to sides of columns with rough finished surfaces etc. complete all as per direction of Engineer-In-Charge

M & L for RCC Column (Nominal mix) Type B1, 1:2:4 (20mm graded aggregate), compaction, curing etc. complete all as per direction of Engineer-In-Charge.

M & L for Brickwork with fly ash bricks in C. M. 1:4, straight or curved on plan exc. 6m mean radius including scaffoldings, curing etc. complete all as per direction of Engineer-In-Charge.

M & L Cement concrete Type B1, 1:2:4 (20 mm graded aggregate) for Coping over wall, slightly rounded or chamfered angles and throating with necessary formwork, compaction, curing etc. complete all as per direction of Engineer-In-Charge.

S & F Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid with bedding layer 40mm thick in C. M. 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing etc. complete all as per direction of Engineer-In-Charge.

S & F structural steel for Roof trusses (framed), trussed, purlins, rafters, posts, fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, gusset plates etc. including welding/riveting etc. complete all as per direction of Engineer-In-Charge.

S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa (Make-Ispat Industries Ltd. / SAIL / TATA / Century Wells Roofing Ind. Ltd / Jindal or equivalent only acceptable) as in roof covering/cladding to wall & designed ridge, fixed with self-drilling & tapping hexagonal head screws & bituminous felt & neoprene/EPDM washer etc. using all necessary safety appliances etc. complete all as per the direction of Engineer-In-Charge

M & L for P.C.C. in sub-floor 100 mm thick Type-B2, 1:2:4 mix (using 40 mm graded aggregate) with finishing the surface of concrete even including necessary formwork, compaction, curing etc. complete all as per direction of Engineer-In-Charge.

M & L for P.C.C. in floor 150 mm thick, Type-B1, 1:2:4 mix (using 20 mm graded aggregate) with finishing the surface of concrete even & smooth with mechanical trowelling using extra cement including necessary formwork, compaction with mechanical vibrator, curing, cutting grooves in concrete floor & filling the joint with sealant etc. complete all as per direction of Engineer-In-Charge.

S & F 1st class hardwood (Teakwood), Plain, solid, straight, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints in segmental work from the solid etc. complete all as per the direction of Engineer-In-Charge

S & F 1st class hardwood (Teakwood) as in Transoms or mullions to receive wooden battens, straight, for solid frames of any description, wrought, framed, double rebated on the solid, rounded or chamfered including necessary supports below the bottom etc. complete all as per the direction of Engineer-In-Charge

M & L for Chamfers, splays, grooves, rebates, rounded angles, rounded nosings, tongued and grooved edges etc., exc. 3mm but not exc. 75mm girth on softwood etc. complete all as per the direction of Engineer-In-Charge

M & L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats etc. complete all as per direction of Engineer-In-Charge

Rendering plaster 20 mm thick on fair face of concrete /Brick surfaces in C.M. 1:4 including finishing the surface even and smooth without using extra cement, using necessary scaffolding, curing etc. complete all as per direction of Engineer-In-Charge

Providing & laying Carpet plank-bitumen backing with non-woven (Gauge: 1/10th, Thickness: 5mm & weight: 3000 Gram/Sqm) etc. complete all as per the direction of Engineer-In-Charge. (Note:- Contractor must visit the site before quoting the rates)

Providing & laying False ceiling in Aluminium channel framing with gypsum sheets etc. complete all as per the direction of Engineer-In-Charge (Note:- Contractor must visit the site before quoting the rates)

Providing & laying Cue Display in plywood from Greenply, Tesa or equivalent including finished the surface with laminate as per site requirement etc. complete all as per the direction of Engineer-In-Charge. (Note:- Contractor must visit the site before quoting the rates)

Providing & laying wall panelling for “BILLIARDS” signage in plywood from Greenply / Tesa or equivalent with finishing the surface with laminate as per site requirement etc. complete all as per the direction of Engineer-In-Charge. (Note:- Contractor must visit the site before quoting the rates)

Providing & laying framework to all windows and door in plywood from Greenply / Tesa or equivalent with finished the surface in laminate as per site requirement etc. complete all as per the direction of Engineer-In-Charge. (Note:- Contractor must visit the site before quoting the rates)

Providing & fixing new door for entrance in plywood & laminate with toughened glass and hardware (Handles, Lock, Hinges, Closing system etc.) as per site requirement etc. complete all as per the direction of Engineer-In-Charge. (Note:- Contractor must visit the site before quoting the rates)

Providing & fixing designer wall panelling on wall opposite to windows with concealed lighting as per site requirement etc. complete all as per the direction of Engineer-In-Charge. (Note:- Contractor must visit the site before quoting the rates)

Supply & fixing (a) recess conduit wiring from meter to MCB in 6mm pvc multistrand wire – 30 RM (b) recess conduit wiring to switches and plug sockets in 1mm, 1.5mm, 2.5mm, 4mm etc. multistrand wire – 150 RM (c) recess conduit wiring to AC point in 6mm PVC multistrand wire – 10RM (d) 1” conduit wiring – 40 RM etc. as per site requirement including cutting grooves in wall and finishing the surface with cement mortar 1:4 & making good surface etc. complete all as per the direction of Engineer-In-Charge. (Note:- Contractor must visit the site before quoting the rates)

Supply & Fixing ambient lighting- 20W 4k Jaquar / Philips or equivalent LED panel lights or downlighter of higher wattage to meet the required illuminance as per site requirement etc. complete all as per the direction of Engineer-In-Charge. (Note:- Contractor must visit the site before quoting the rates)

Supply & Fixing lounge area lighting 9W/16W 3k Jaquar / Philips or equivalent COB or downlighter of adequate wattage to meet the required illuminance as per site requirement etc. complete all as per the direction of Engineer-In-Charge. (Note:- Contractor must visit the site before quoting the rates)

Supply & Fixing LED profile lights for concealed lighting in false ceiling and display as per site requirement etc. complete all as per the direction of Engineer-In-Charge. (Note:- Contractor must visit the site before quoting the rates)

Supply & Fixing Decorative designer pendant light fixture of dimensions 5’ x 6” x 2’6’’in metal with filament bulbs or LED light upto 25W – 30W to illuminate the Billiard Table as per site requirement etc. complete all as per the direction of Engineer-In-Charge. (Note:- Contractor must visit the site before quoting the rates)

Supply & Fixing Switch Boards – 6 Nos. (12, 8, 6 & 3 module) Make- Anchor of equivalent, Switches – 22 Nos. Make- Anchor or equivalent in 6, 16 & 32 Amp for lights, fans, AC & Sockets. Sockets – 6 Nos. Make- Anchor or equivalent in 5 & 15 Amp as per site requirement etc. complete all as per the direction of Engineer-In-Charge. (Note:- Contractor must visit the site before quoting the rates)

Supply & Fixing Wall Fans 3 blade of 400mm length each, Make- Havells / Bajaj / Atomberg or equivalent as per site requirement etc. complete all as per the direction of Engineer-In-Charge. (Note:- Contractor must visit the site before quoting the rates)

Supply & Fixing Decorative wall lights, size- 9’’ to 12”, 9W in lounge area as per site requirement etc. complete all as per the direction of Engineer-In-Charge. (Note:- Contractor must visit the site before quoting the rates)

Providing & laying wall putty 2 coats to form even & smooth surface, 2 coats of primer & 2 coats of Plastic Emulsion paints on wall & ceiling of Make- Dulux / Jotun or equivalent etc. complete all as per the direction of Engineer-In-Charge. (Note:- Contractor must visit the site before quoting the rates)

Supply & Fixing black out curtains for windows from Ceiling to floor height, eyelet pattern as per site requirement etc. complete all as per the direction of Engineer-In-Charge. (Note:- Contractor must visit the site before quoting the rates)

Supply & Fixing anodised Aluminium window in 1mm gauge, powder coated aluminium frame with tinted glass & mosquito mesh in 3 channel track as per site requirement etc. complete all as per the direction of Engineer-In-Charge. (Note:- Contractor must visit the site before quoting the rates)

Supply & Fixing “BILLIARDS” signage 4’ 6’’ x 8’’ in acrylic & LED light on wall as per site requirement etc. complete all as per the direction of Engineer-In-Charge. (Note:- Contractor must visit the site before quoting the rates)

M & L Synthetic enamel painting on ironwork – 2 coats over one coat of red primer, Make- Asian / Berger / Nerolac / Shalimar or equivalent paints of 1st quality shall only be used in the work etc. complete all as per the direction of Engineer-In-Charge

M & L Plastic Emulsion painting on walls / ceiling – 2 coats over one coat of wall primer on new surfaces, Make- Asian / Berger / Nerolac / Shalimar or equivalent paints of 1st quality including all preparatory works etc. complete all as per the direction of Engineer-In-Charge

M & L for applying Two or more coats of 100% Premium acrylic emulsion paint on wall surfaces having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10sqm over new surfaces, Make- Asian / ICI / Berger / Nerolac / Shalimar paints or equivalent paints of 1st quality only shall be used in the work including all necessary scaffolding etc. complete all as per the direction of Engineer-In-Charge

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thickness as in soft/loose soil etc. complete all as per the direction of Engineer-In-Charge

Removing excavated soil materials upto 50 mts. from starting point and depositing where directed at a level not exceeding 1.5 m above the starting point etc. complete all as per the direction of Engineer-In-Charge

H.I BOHRA (BID ID -724662)

HARIOM ENTERPRISES (BID ID -723852)

RAMKANWAR CONSTRUCTION COMPANY (BID ID -727400)

VILAS SONTAKKE (BID ID -727392)

P. P. CONSTRUCTION (BID ID -722004)

M/s Praveen Construction (BID ID -727468)