REPAIRS/POLISHING/RECANNING TO WOODEN FURNITURE UNDER GE FORT KOCHI.

Amount

CHAIR DINING( FD-279, 228 & 203 ):-

M&L for removal of existing broken/unserviceable front leg of chair dining, renewing the same with new front leg, made out of 460 x 55 x 30mm, 1st class hard wood (Teak) made to shape for chair dining and all exposed surfaces duly french polished and fitted as shown in drg including provn of a hard rubber ring screwed at the bottom of the new leg, complete all as specified and as directed. FD-279, 228 & 203

M&L for removal of existing broken/unserviceable rear leg of chair dining, renewing the same with a new rear leg, made out of 890 x 55 x 30mm, 1st class hard wood (Teak) made to shape with the existing leg and all exposed surfaces duly french polished and fitted as shown in drg including provn of a hard rubber ring screwed at the bottom of the new leg, complete all as specified and as directed.FD-279, 228 & 203.

M&L for removal of existing broken top back rest of chair dining and renewing the same with a new back rest made out of 405 x 45 x 35mm tapering to 405 x 45 x 15mm, 1st class hard wood (Teak) made to shape by slightly concaving and all exposed surfaces duly french polished and fitted all as shown in drg and complete all as specified and as directed.FD-279, 228 & 203. Note : Each back rest shall be measured as seperate unit

M&L for removal of the existing broken front rail of the seat of chair dining and renewing the same with a new one made out of 440 x 30 x 65 mm in 1st class hard wood (Teak) made to shape, provided with 3mm dia holes for caning @ 12.5 mm C/C and all exposed surfaces duly french polished and fitted all as shown in drg and complete all as specified and as directed. FD-279, 228 & 203.

M&L for removal of existing broken back rail of the seat of chair dining and renewing the same with a new one made out of 405 x 30 x 65 mm 1st class hard wood (Teak) made to shape provided with 3mm dia holes for caning @ 12.5 mm C/C and all exposed surfaces duly french polished and fitted all as shown in drg and complete all as specified and as directed. FD-279, 228 & 203.

M&L for removal of existing broken, side rail of the seat frame of chair dining and renewing the same with a new one made out of 430 x 30 x 65 mm 1st class hard wood (Teak) made to shape provided with 3mm dia holes for caning @ 12.5 mm C/C and all exposed surfaces duly french polished and fitted all as shown in drg and complete all as specified and as directed. FD-279, 228 & 203.

M&L for removal of existing/broken bottom stiffener complete of chair dining and renewing the same with new stiffeners made out of 25 x 20 mm 1st class hard wood (Teak) having a length of 430 mm and all exposed surfaces duly french polished and fitted all as shown on drg and complete all as specified and as directed. FD-279, 228 & 203.

CHAIR WRITING( FD-280,250 )

All as per item No. 1.01 here-in-above but renewing front leg of chair writing with new leg made out of 685x55x30mm. FD-280,250

All as per Item No.1.02 here-in-above but renewing the rear leg of chair writing with new leg made out of 890 x 30 x 55mm. FD-280,250

All as per Item No. 1.03 here-in-above but renewing the back rest of chair writing with new back rest made to shape to 50 x 15mm out of 50 x 35mm. FD-280,250

M&L for removal of existing broken/unserviceable any one arm rest of chair writing and renewing the same with a new arm rest made to shape out of 25mm thick, top width 60mm, tapering to the bottom having a width of 55mm, length 470 mm 1st class hard wood (Teak) including french polishing all exposed surfaces and fitted all as shown on drawing and complete all as specified and as directed. FD-280 & 250.

All as per Item No.1.07 here-in-above but bottom stiffner complete of chair writing having a length of 470mm. FD-280,250

M&L for removal of existing broken front/back/side rail of seat frame of chair writing and renewing the same with new one made out of 440 x 30 x 65 mm 1st class hard wood (Teak) made to shape provided with 3mm dia holes for caning @ 12.5 mm C/C and all exposed surfaces duly french polished and fitted all as shown in drg and as specified. FD-280/250. Note : Each rail shall be measured as seperate unit.

CHAIR WOODEN BOTTOM W/O ARMS( FD-285 & 225 )

All as per Item No.1.01 here-in-above but renewing front leg having a length of 435mm for chair wooden bottom without arms. FD-285 & 225

All as per Item No.1.02 here-in-above but renewing rear leg having a length of 815 mm for chair wooden bottom without arms. FD-285 & 225

All as per Item No.1.03 here-in-above but renewing back rest made to shape out of 405 x 50 x 35 mm for chair wooden bottom without arms. FD-285 & 225

All as per Item No. 1.04 here-in-above but renewing front rail made to shape out of 440 x 30 x 65 mm for chair wooden bottom without arms. FD-285 & 225

All as per Sl Item No.1.05 here-in-above but renewing rear rail made to shape out of 400 x 30 x 65 mm for chair wooden bottom without arms. FD-285 & 225

All as per Sl Item No.1.06 here-in-above but renewing side rail made to shape out of 435 x 30 x 65 mm for chair wooden bottom without arms. FD-285 & 225

All as per Sl Item No.1.07 here-in-above but the length of stiffeners 430mm for chair wooden bottom without arms. FD-285 & 225

M&L for removal of existing broken / unserviceable plywood seat of chair wooden bottom without arms and renewing the same with new OST plywood (Make-Kit ply/Century/Indian Plywood (Anchor) seat 6mm thick fixed to the side frames of the seat with steel screws @ 75mm C/C shown on drg and complete all as specified and as directed. FD-285 & 225

CHAIR EASY( FD-229 & 201 )

All as per Sl Item No.1.01 here-in-above but renewing front leg of chair easy made to shape out of 545 x 55 x 25 mm all as shown on drg and complete all as specified and as directed FD-229 & 201

All as per Sl Item No. 1.02 here-in-above but renewing rear leg of chair easy made to shape out of 490 x 55 x 25 mm all as shown on drg and complete all as specified and as directed. FD-229 & 201

All as per Sl Item No. 2.04 here-in-above but renewing arm rest of chair easy made to shape out of 610 x 65 x 25 mm all as shown on drg and complete all as specified and as directed FD-229 & 201

All as per Sl Item No.1.04 here-in-above but renewing front rail of chair easy seat frame made to shape out of 510 x 55 x 25 mm all as shown on drg and complete all as specified and as directed. FD-229 & 201

All as per Sl Item No. 1.05 here-in-above but renewing rear rail of seat frame of chair easy made to shape out of 480 x 70 x 40 mm all as shown in drg and complete all as specified and as directed. FD-229 & 201

All as per Sl Item No. 1.06 here-in-above but renewing side rail of seat frame of chair easy made to shape out of 575 x 70 x 40 mm all as shown on drg and complete all as specified and as directed. FD-229 & 201

M&L for removal of existing top / bottom rail of back rest frame of chair easy renewing the same with new one made to shape out of 480 x 55 x 40mm1st class hard wood (Teak) provided with 3mm dia holes for caning @ 12.5 mm C/C and all exposed surfaces duly french polished and fitted all as shown on drg and complete all as specified and as directed. FD-229 & 201. Note : Each rail shall be measured as sperate unit.

M&L for removal of broken unserviceable side rail of back frame of chair easy renewing with new one made to shape out of 440 x 70 x 25 mm 1st class hard wood (Teak) provided with 3mm dia holes for caning @ 12.5 mm C/C and all exposed surfaces duly french polished and fitted all as shown on drg and complete all as specified and as directed. FD-229 & 201

M&L for removal of the existing broken Stiffener rail of chair easy and renewing with new one, made to shape out of 510 x 50 x 25 mm 1st class hard wood (Teak) and all exposed surfaces duly french polished and fitted all as shown on drg and complete all as specified and as directed FD-229 & 201

CHAIR EASY CUSHIONED( FD-358 )

All as per Sl Item No.1.01 here-in-above but renewing front leg of chair easy cushioned made to shape out of 545 x 55 x 25 mm all as shown on drg and complete all as specified and as directed.

All as per Sl Item No. 1.02 here-in-above but renewing rear leg of chair easy cushioned made to shape out of 490 x 55 x 25 mm all as shown on drg and complete all as specified and as directed.

All as per Sl Item No. 2.04 here-in-above but renewing arm rest of chair easy cushioned made to shape out of 610 x 65 x 25 mm all as shown on drg and complete all as specified and as directed.

M&L for removal of existing damaged cushion from the back and renewing with new back cushion 50mm thick (Make -Kurl-on) fixed over existing frame with 3mm thick commercial plywood (Make-Kit ply/Century/Indian Plywood (Anchor) duly covered incl the frame/ cushion up to back with best quality leatherised Rexene of approved colour and fixed to the back of the chair easy with screws all as shown in drg and complete all as specified and as directed. FD-358

All as per Sl Item No. 5.04 here-in-above but renewing the seat cushion of chair easy cushioned with new cushion (Make -Kurl-on), 75mm thick, all as shown in drg and complete all as specified and as directed. FD-358

M&L for removal of existing damaged cushions fixed on any one of the arm rests of chair easy cushioned, renewing the same with new cushion (Make -Kurl-on) of 25 mm thick fixed on existing arm rest made to shape duly covered with leatherised Rexene and cushion base fixed to top of arm rest with screws all as shown in drg and complete all as specified and as directed. FD-358

CHAIR DINING LONG BACK( FD-357 )

M&L for removal of existing broken/unserviceable front leg of chair dining cushioned long back & renewing the same with new front leg, made out of 450 x 50 x 25mm 1st class hard wood (Teak) made to shape for chair dining long back and all exposed surfaces duly french polished and fitted as shown in drg including provn of a hard rubber ring screwed at the bottom of the new leg, complete all as specified and as directed. FD-357

M&L for removal of existing broken/unserviceable rear leg of chair dining long back & renewing the same with a new rear leg, made out of 1200 x 50 x 25mm 1st class hard wood (Teak) made to shape with the existing leg and all exposed surfaces duly french polished and fitted as shown in drg including provn of a hard rubber ring screwed at the bottom of the new leg, complete all as specified and as directed. FD-357

M&L for removal of damaged cushioned back of chair dining with long back complete and replace with new cushioned back frame mounted on 10mm thick commercial plywood (Make-Kit ply/Century/ Indian Plywood (Anchor) base over 50mm thick 24 density synthetic foam rubber made to shape as shown in drg duly covered with leatherised Rexene and fixing the cushioned base to the back frame of the chair with screws all as shown on drg and complete all as specified and as directed. FD-357

M&L for removal of existing damaged cushioned seat frame of chair dining with long back complete and replace with new cushioned seat frame mounted on 10mm thick commercial plywood base (Make-Kit ply/Century/ Indian Plywood (Anchor) over which 50mm thick 24 density synthetic foam rubber duly covered with superior quality leatherised rexine and fixing the cushioned seat to the seat base/frame with screws all as shown in drg and complete all as specified and as directed. FD-357

M&L for removal of existing damaged back cover of chair dining with long back complete and replace with new 10mm thick commercial plywood (Make-Kit ply/Century/Indian Plywood (Anchor) base covered with superior quality leatherised rexine of existing color and texture and fixing the back cover to the back base/frame with screws all as shown in drg and complete all as specified and as directed. FD-357

CHAIR PEDESTAL WRITING( DB-4124 )

M&L for removal of existing broken/unserviceable wooden writing hand rest of chair pedastal writing and renewing with new first class teak wood hand rest made to shape as shown on drg having middle length 750mm, 25mm thick the slightly curved base portion having 55mm width at the base increasing in width to 80 mm in the middle the expanded writing portion having a width 290mm and length 365 mm front portion being oval, all exposed surfaces duly french polished and fixed in position all as shown on drg and complete all as specified and as directed. DB-4124

M&L for removal of existing broken right front leg alongwith its top most support for the writing hand rest of chair pedestal writing and renewing with new one made to shape out of 685 x 55 x 55mm 1st class hard wood (Teak) and the top support should be 90mm long on the outside of the leg and 120mm in the inner portion 25mm thick, all exposed surfaces duly french polished and fixed to the top portion of the leg all as shown on drg and complete all as specified and as directed. DB-4124

M&L for removal of existing broken left front leg of chair pedestal writing and renewing the same with new one made to shape out of 430 x 55 x 55mm 1st class hard wood (Teak), all exposed surfaces duly french polished and fixed all as shown on drg and complete all as specified and as directed. DB-4124

M&L for removal of existing any one of hind leg of chair pedestal writing and renewing with new single hind leg made to shape out of 860 x 100 x 35mm 1st class hard wood (Teak), all exposed surfaces duly french polished and fixed all as shown on drg and complete all as specified and as directed. DB-4124

M&L for removal of existing broken top back support of chair pedestal writing and renewing with new one made to shape out of 555 x 125 x 70 mm 1st class hard wood (Teak), all exposed surfaces duly french polished and fixed all as shown on drg and complete all as specified and as directed. DB-4124

M&L for removal of existing broken middle back supporting stiffner of chair pedestal writing and renewing with new one made to shape out of 365 x 60 x 40 mm 1st class hard wood (Teak), all exposed surfaces french polished and fixed all as shown on drg and complete all as specified and as directed. DB-4124

HAT STAND( FD-233 )

M&L for removal of existing damaged teak wood edging on all sides of Hat Stand & renewing the same with new 1st class hard wood (Teak) edging 6 mm thick 35 mm wide 1000 mm long and 710mm high on both sides, all exposed surfaces french polished and fixed with nails all as shown in drg and as specified and as directed. FD-233

M&L for removal of existing broken/foggy mirror of Hat Stand and renewing the same with new mirror (Make-Modi Guard/Prayag/ Trupti) not less than 5.0 mm thick and of size 300 x 400 mm and fixed complete all as shown in drg and complete all as specified and as directed. FD-233

M&L for removing existing damaged plywood of Hat Stand and renewing the same on the front face with new 4mm thick one side teak veneered (OST)plywood (Make-Kit ply/Century/Indian Plywood (Anchor) except on the mirror portion and refixing the existing/ retrieved peg hooks and french polishing the teak veneered surfaces complete all as shown in drg and complete all as specified and as directed. FD-233

M&L for fixing Hat stand on wall at site duly drilling holes with drilling machine and fixing with 45x8 mm MS screw over PVC plug all as per direction of Engr in charge

M&L for removal of existing damaged peg hooks of Hat Stand and renewing each peg with new anodised aluminium peg hooks of 120mm long, 40mm base, fixed to the 4mm thick plywood (Make-Kit ply/Century/Indian Plywood (Anchor)face with a pair of screws all as shown in drg and complete all as specified and as directed. FD-233

PEG TABLE( FD-236 )

M&L for removal of existing damaged top of peg table and renewing the same with new top 18mm thick prelaminated particle board 450 x 300 mm size (Novopan/Kitply/Greenply/Ecoboard/ Archidlam/Bhutan) with one side decorative teak finish including 18mm wide, 4 mm thick teak wood edging on all sides incl french polishing teak wood edging and as shown in drg and complete all as specified and as directed. FD-236

M&L for removal of existing damaged any one leg of peg table and renewing the same with new leg 362 mm long x 30 x 50mm first class hard wood (Teak), and all exposed surfaces french polished and fixed all as shown in drg and complete all as specified and as directed. FD - 236

M&L for removal of existing broken long rail of peg table and renewing the same with new rail 400 mm long x 30 x 50mm first class hard wood (Teak), and all exposed surfaces french polished and fixed all as shown in drg and complete all as specified and as directed. FD-236

M&L for removal of existing broken short rail of peg table and renewing the same with new rail 250 mm long x 30 x 50mm first class hard wood (Teak), and all exposed surfaces french polished and fixed all as shown in drg and complete all as specified and as directed. FD-236

SIDE BOARD( FD-241 )

M&L for removal of existing damaged any one of the side or middle shutters of side board and renewing the same with new single shutter made of 18 mm thick prelaminated particle board (Novopan/Kitply/Greenply/Ecoboard/ Archidlam/Bhutan)(exterior grade) with one side decorative teak finish of size 318 x 600 mm including 18 x 4 mm size teak wood edging all round, shutter fixed with a pair of 75 mm size stainless steel butt hinges including refixing of retrieved builders hardware such as knobs, ball spring catches etc and french polishing the teak wood edging

M&L for removal of existing damaged top of the side board, renewing the same with new 18mm thick pre laminated particle board (Novopan/Kitply/Greenply/Ecoboard/ Archidlam/Bhutan) (exterior grade) 450 x 1500 mm size with one side decorative teak finish and fixed complete all as shown in drg and as specified and as directed. FD-241

M&L for removal of existing damaged teak wood back and renewing the same with new back made of 12mm thick commercial plywood (Kitply/Century ply/Indian Plywood (Anchor)) 635 x 1500 mm and fixed complete all as shown in drg and as specified and as directed.FD-241

M&L for supply Stainless steel knobs as directed by EIC.

TABLE DINING 8 PERSONS (1800x900x760 mm)( FD-273 )

M&L for removal of existing damaged top of table dining 8 persons complete and renewing the same with new top made of 18mm thick prelaminated particle board (Novopan/Kitply/Greenply/ Ecoboard/ Archidlam/Bhutan)(exterior grade) of teak facing one side of size 900 mm x 1800 mm with 4mm thick teak wood beading alround, french polishing on teak wood edging and fixed complete all as shown in drg and as specified. FD-273

M&L for removal of existing damaged legs of table dining and renewing with new leg made to shape out of 722x 75 x 40mm 1st class hard wood (Teak), provn of a hard rubber ring screwed at the bottom of the new leg and french polishing all exposed surfaces and fixed complete all as shown in drg and as specified. FD-273

M&L for removal of existing damaged long rail of table dining and renewing with new long rail made to shape out of 1740x 25 x 100mm 1st class hard wood (Teak), provn of a hard rubber ring screwed at the bottom of the new leg and french polishing all exposed surfaces and fixed complete all as shown in drg and as specified. FD-273

M&L for removal of existing damaged short rail of table dining and renewing with new short rail made to shape out of 840 x 25 x 100 mm1st class hard wood (Teak), provn of a hard rubber ring screwed at the bottom of the new leg and french polishing all exposed surfaces and fixed complete all as shown FD-273 and complete all as specified and as directed.

TABLE DINING 6 PERSONS (1500x900x760 mm)( FD-273 )

M&L for removal of existing damaged top of table dining 6 persons complete and renewing the same with new top made of 18mm thick prelaminated particle board (Novopan/Kitply/Greenply/ Ecoboard/ Archidlam/Bhutan)(exterior grade) of teak facing one side of size 900 mm x 1500 mm with 4mm thick teak wood beading on all four sides, french polishing on teak wood edging and fixed complete all as shown in drg and complete all as specified and as directed. FD-273

M&L for removal of existing damaged legs of table dining and renewing with new leg made to shape out of 722 x 75 x 40mm 1st class hard wood (Teak), provn of a hard rubber ring screwed at the bottom of the new leg and french polishing all exposed surfaces and fixed complete all as shown in drg and complete all as specified and as directed. FD-273

M&L for removal of existing damaged long rail of table dining and renewing with new long rail made to shape out of 1440x 25 x 100mm 1st class hard wood (Teak), provn of a hard rubber ring screwed at the bottom of the new leg and french polishing all exposed surfaces and fixed complete all as shown in drg and complete all as specified and as directed. FD-273

M&L for removal of existing damaged short rail of table dining and renewing with new short rail made to shape out of 840x 25 x 100mm 1st class hard wood (Teak), provn of a hard rubber ring screwed at the bottom of the new leg and french polishing all exposed surfaces and fixed complete all as shown in drg and complete all as specified and as directed. FD-273

TABLE DINING (1200 X 900X760 mm)( FD-273 )

All as per Sl item No. 12.01 here-in-above but new top for table dining having size 1200 x 900 mm. FD-273

All as per Sl item No.12.02 here-in-above but new leg for table dining made out of 722 x 75 x 40 mm. FD-273

All as per Sl item No. 12.03 here-in-above but new side rail for table dining having size 25x100x1140 mm. FD-273

TABLE WITHOUT DRAWER (900 X 600 X760 mm)( FD-284 )

All as per Sl item No. 12.01 here-in-above but new top for table without drawer having size 900 x 600mm. FD-284

All as per Sl item No. 12.02 here-in-above but new leg for table without drawer, made to shape out of 741 x 60 x 30 mm. FD-284

Removal of existing broken any one long rail of table without drawer and renewing the same with new rail made to shape out of 20 x 60 x 840 mm 1st class hard wood (Teak), french polishing all exposed surfaces and fixed all as shown on drg and complete all as specified and as directed. FD-284

All as per Sl item No. 14.03 here-in-above but new short rail of size 20x60x540 mm for table 900 x 600 x760 mm without drawer. FD-284

TABLE CENTRE( FD-274 )

All as per Sl item No. 12.01 here-in-above but new top of size 900 x 450 mm for table centre. FD-274

All as per Sl item No. 12.02 here-in-above but new leg made to shape out of 400 x 60 x 30 mm for table centre. FD-274

All as per Sl item No. 12.03 here-in-above but new long rail of size 20x50x840 mm for table centre (FD - 274)

All as per Sl item No. 12.04 here-in-above but new short rail of size 20x50x440 mm for table centre (FD - 274)

TABLE BED SIDE ( FD-276 )

All as per Sl item No. 12.01 here-in-above but new table top of size 450 x 230 mm for table bed side. FD-276

M&L for removal of existing damaged any one of the two sides of table bed side and renewing the same with new side using 18mm prelaminated particle board (Novopan/Kitply/Greenply/Ecoboard/ Archidlam/Bhutan) of size 230 x 510 mm with teak facing on one side and 4mm teak wood beading on the front edge including french polishing on wooden parts and fixed all as shown on drg and complete all as specified and as directed. FD-276

M&L for removal of existing damaged back ply of table bed side and renewing the same with new 6 mm thick commercial ply (Make-Kit ply/Century/Indian Plywood (Anchor) of size 450 x 510 mm including french polishing on wooden parts and fixed all as shown on drg and complete all as specified and as directed. FD-276

TABLE WRITING( FD-275 )

All as per Sl item No.12.01 here-in-above but new table top of size 1145 x 600 mm for table writing. FD-275

All as per Sl item No. 12.02 here-in-above, but new leg made to shape of size 717 x 55 x 35 mm for table writing. FD-275

All as per Sl item No. 12.03 here-in-above but new long rail of size 25x50x1085 mm for table centre (FD - 275)

All as per Sl item No. 12.04 here-in-above but new short rail of size 50x25x540 mm for table centre (FD - 275)

M&L for removal of existing damaged shutter of the table shelf of table writing and renewing with new shutter 18mm thick one side teak veneered particle board (Make-Kit ply/Century/Indian Plywood (Anchor) with 4mm thick teak wood beading on all 4 sides fixed to the side with Piano hinges of MS and the shutter provided with a recessed handle 50 x 38 mm and also cupboard lock with duplicate keys including french polishing teak veneered surface and TW beading and fixed complete all as shown in drg andcomplete all as specified and as directed. FD-275

M&L for removal of existing damaged drawer of table writing complete and renewing with new drawer with 18 mm prelaminated particle board (Novopan/Kitply/Greenply/Ecoboard/ Archidlam/ Bhutan) and back plank base shall be 6mm thick commercial plywood (Make-Kit ply/Century/Indian Plywood (Anchor) and the drawer to be provided with a new recessed type handle 50 x 38 mm embedded in the drawer face, exposed portion duly french polished all as shown in drg and complete all as specified and as directed. FD-275

TEAPOY( FD-278 )

All as per Sl item No. 12.01 here-in-above, but new top of size 600 x 450 mm for Teapoy. FD-278

All as per Sl item No. 12.02 here-in-above, but new leg made out of 30 x 60 x 497 mm for teapoy. FD-278

M&L for removal of existing broken long rail of Teapoy and renewing with new long rail made to shape out of 510x 20 x 50 mm 1st class hard wood (Teak) including provn of a hard rubber ring screwed at the bottom of the new leg and french polishing all exposed surfaces and fixed complete all as shown in drg and complete all as specified and as directed. FD-278

All as per Sl Item No.12.04 here-in-above but renewing short rail of teapoy made to shape out of 420 x 20 x 50 mm all as shown on drg and as specified. FD-278

TABLE 3' X 2' WITH DRAWER( FD-283 )

All as per Sl item No.12.01 here-in-above, but new top of size 900x600 mm for table with drawer. FD-283

All as per Sl item No.12.02 here-in-above, but new leg for table with drawer made to shape out of 741 x 60 x 30 mm. FD-283

Removal of existing damaged/unserviceable drawer of table with drawer complete and renewing the same with new drawer with front made of 18 mm thick prelaminated particle borad 110 mm high and rear side with 12 mm thick particle board (Novopan/Kitply / Greenply/Ecoboard/ Archidlam/Bhutan) and base 6 mm thick commercial plywood (Make-Kit ply/Century/Indian Plywood (Anchor), all wooden exposed surface of drawer duly french polished all as shown on drg and complete all as specified and as directed. FD-283

TABLE DRESSING GENTS( FD -230 )

M&L for removal of existing foggy/broken mirror of table dressing gents and renewing the same with new mirror (Make-Modi Guard/ Prayag/ Trupti) not less than 5.0 mm thick and of size 380 x 760 mm and fixing on the existing frame all as shown on drg and complete all as specified and as directed. FD -230

M&L for fixing Table dressing Gents on wall at site duly drilling holes with drilling machine and fixing with 45x8 mm MS screw over PVC plug all as per direction of Engr in charge

TABLE DRESSING LADIES( FD-251/378 )

All as per Sl item No. 20.01 here-in-above but mirror of size 366 x 1220 mm for table dressing ladies. FD-251/378

M&L for removal of existing damaged aluminium double channel alongwith both of the broken sliding glass shutters of table dressing ladies and renewing with new aluminium double channels 12 x 22 mm and new sliding glass shutters not less than 5.0 mm thick all as shown on drg and complete all as specified and as directed. FD-251/378

M&L for removal of existing damaged/unserviceable single drawer of the table dressing ladies and renewing with a new drawer with front made up of 12 mm thick prelaminated particle board (Novopan / Kitply / Greenply/Ecoboard/ Archidlam/Bhutan)(exterior grade) with teak finish on one side with a 22 mm dia brass chromium plated knob fixed to the middle front, 12 mm thick commercial plywood (Make-Kit ply/Century/Indian Plywood (Anchor) for back & sides and drawer base with 6 mm thick commercial plywood (Make-Kit ply/Century/Indian Plywood (Anchor)all as shown in drg and complete all as specified and as directed. FD-251/378

M&L for removal of existing damaged ply back of the mirror of table dressing ladies and renewing with new (Make-Modi Guard/ Prayag/ Trupti) 6mm thick 366 x 1220 mm size commercial plywood (Make-Kit ply/Century/Indian Plywood (Anchor) all as shown in drg and complete all as specified and as directed. FD-251/378

STOOL DRESSING( FD-252 )

M&L for removal of existing broken/unserviceable any one leg of chair dining, renewing the same with new leg, made out of 380 x 50 x 30mm 1st class hard wood (Teak) made to shape for chair dining and all exposed surfaces duly french polished and fitted as shown in drg including provn of a hard rubber ring screwed at the bottom of the new leg, complete all as specified and as directed. FD-252

M&L for removal of existing broken side rail of stool dressing and renewing the same with new rail 300 mm long x 25 x 50mm first class hard wood (Teak), and all exposed surfaces french polished and fixed all as shown in drg and complete all as specified and as directed. FD-252

M&L for removal of existing broken front/rear rail of stool dressing and renewing the same with new rail 450 mm long x 25 x 65mm first class hard wood (Teak), and all exposed surfaces french polished and fixed all as shown in drg and complete all as specified and as directed. FD-252

M&L for removal of existing cane beading on seat frame of stool dressing & renewing the same with new one made to shape out of 450 x 20 x 20mm1st class hard wood (Teak) provided with 3mm dia holes for caning @ 12.5 mm C/C and all exposed surfaces duly french polished and fitted all as shown on drg and complete all as specified and as directed. FD-252

BOOK CASE( FD-237 )

M&L for removal of existing damaged teak wood back and renewing the same with new back made of 6 mm thick commercial plywood (Make-Kit ply/Century/Indian Plywood (Anchor) 635 x 1500 mm and fixed complete all as shown in drg and as specified.FD-237

M&L for removal of existing damaged any one of the door shutters of book case and renewing the same with new single shutter made of 18 mm thick prelaminated particle board (Make-Kit ply/Century/ Indian Plywood (Anchor) (exterior grade) with one side decorative teak finish of size 318 x 600 mm including 18 x 4 mm size teak wood edging all round, shutter fixed with a pair of 75 mm size stainless steel butt hinges including refixing of retrieved builders hardware such as knobs, ball spring catches etc and french polishing the teak wood edging complete all as shown on drg and complete all as specified and as directed FD-237

M&L for supply Stainless steel knobs as directed by EIC.

CHAIR DINING CUSHIONED( FD/E6/MAP/10 )

S & F 450x65x25mm size Teak wood front/side rail of chair dinning officers', fixed to main frame and legs of chair dinning (Drg No FD/E6/MAP/10), apply two coats of french polich to new front/side rail to match with existing and apply a coat of french polish to other parts of chair including taking out broken/unserviceable front/side rail complete all as specified and as directed by Engineer-in-Charge.

S & F 450x50x35mm size Teak wood front leg of chair dinning officers', fixed to main frame of chair dinning (Drg No FD/E6/MAP/10)), apply two coats of french polich to new leg to match with existing and apply a coat of french polish to other parts of chair including taking out broken/unserviceable front leg complete all as specified and as directed by Engineer-in-Charge.

S & F 75mm thick, 40 density foam seat (Make-Kurl-on), covered with fabric of approved colour suitable for chair dinning officers' (Drg No FD/E6/MAP/10)), fixed to 12mm thick commercial plywood (Make-Kit ply/Century/Indian Plywood (Anchor) including taking out old unserviceable cushion seat complete all as specified and as directed by Engineer-in-Charge.

Note for all items above : The above all new exposed Teak wood surface of wooden furniture shall be applied with 02 coats of french polish after preparation of surfaces. Rate quoted for the above is deemed to be included for both

SOFA SEAT WITH CUSHION( FD-258/281/373 )

S & F 560 x 530 x 100mm size foam cushion (Make-Kurl-on) , seat/back, having 40 density, covered all sides with tapestry cloth costing not less than Rs 420 per meter of approved colour / shade / texture suitable for sofa 4 & 5 seater as per drawing FD-281/373 complete all as specified and as directed. Note: Seat and back will be measured as seperate unit.

S & F 100mm thick foam cushion seat (Make-Kurl-on), having 40 density, covered all sides with tapestry cloth costing not less than Rs 420 per meter of approved colour / shade / texture suitable for sofa single seater with cushion as per drawing No FD-258, including taking out old unserviceable/worn out seat cushion complete all as specified and as directed.

S & F 100mm thick foam cushion seat (Make-Kurl-on), having 40 density, covered all sides with tapestry cloth costing not less than Rs 420 per meter of approved colour / shade / texture, suitable for sofa set, three seater with cushions as per drawing No FD-258, including taking out old unserviceable/worn out seat cushion complete all as specified and as directed.

S & F 50mm thick foam cushion back (Make-Kurl-on), having 32 density, covered all sides with tapestry cloth costing not less than Rs420per meter of approved colour / shade / texture including 25mm thick cushion padding to get aesthetical shape and fixing four middle buttons to form middle curve to retain the aesthetical curveed shape, suitable for Sofa chair single seater as per drawing No FD-258, fixed with suitable brass screw including taking out old unserviceable/worn out seat cushion complete all as specified and as directed.

S & F 50mm thick foam cushion back (Make-Kurl-on), having 32 density, covered all sides with tapestry cloth costing not less than Rs 420 per meter of approved colour / shade / texture including 25mm thick cushion padding to get aesthetical shape and fixing four middle buttons to form middle curve to retain the aesthetical curveed shape, suitable for Sofa chair three seater as per drawing No FD-258, fixed with suitable brass screw including taking out old unserviceable/worn out seat cushion complete all as specified and as directed.

M & L providing new tapestry cloth costing not less than Rs 420 per meter of approved colour / shade / texture suitable for 560 x 530 x 100mm size foam cushion (Make-Kurl-on) seat/back, stiched three sides and provide best quality zip on one side for opening and closing suitable for sofa 4 & 5 seater as per drawing FD-281/373. including taking out old unserviceable/worn out cloth complete all as specified and as directed.

CANNING FOR ALL TYPE CB WOODEN CHAIRS M & L Canning chair dinning, chair writing, chair easy,chair pedestal, stool dressing, etc with new plastic cane of size 1.8x0.46mm and boarder with 3.0x0.60mm size cane (Make-Shiva plastic/Swastik/shah cane) as per Godrej Pattern after tightening the loose chair/stool duly french polishing the structures of chair/stool including taking out old/damaged plastic cane from the aforesaid furnitures and cleaning the entire surface of furniture complete all as specified and directed by Engineer-in-Charge.

POLISHING FOR ALL WOODEN FURNITURE

M & L preparation of old treated wooden surfaces of Bed hard ply Top as per drawing No-FD-246/247 and applying two coats of french polish complete all as specified and as directed.

M & L preparation of old treated wooden surfaces of Chair writing as per drawing No-FD-20/280 and applying two coats of french polish complete all as specified and as directed.

M & L preparation of old treated wooden surfaces of Chair Pedestal writing as per drawing No-DB-4124 and applying two coats of french polish complete all as specified and as directed.

M & L preparation of old treated wooden surfaces of Chair for table Card as per drawing No-FD-353 and applying two coats of french polish complete all as specified and as directed.

M & L preparation of old treated wooden surfaces of Chair Dining with long back as per drawing No-FD-357 and applying two coats of french polish complete all as specified and as directed.

M & L preparation of old treated wooden surfaces of Chair Easy Cushioned as per drawing No-FD-358 and applying two coats of french polish complete all as specified and as directed.

M & L preparation of old treated wooden surfaces of Chair Easy as per drawing No- FD-17/229 and applying two coats of french polish complete all as specified and as directed.

M & L preparation of old treated wooden surfaces of Chair Dining as per drawing No- FD-16/279 and applying two coats of french polish complete all as specified and as directed.

M & L preparation of old treated wooden surfaces of Chair WBB as per drawing No- FD-56/285 and applying two coats of french polish complete all as specified and as directed.

M & L preparation of old treated wooden surfaces of Chair Dining (MAP) and applying two coats of french polish complete all as specified and as directed.

M & L preparation of old treated wooden surfaces of Hat stand With Mirror as per drawing No- FD-233 and applying two coats of french polish complete all as specified and as directed.

M & L preparation of old treated wooden surfaces of Notice board, 1500x900mm size, as per drawing No- FD-99(M) and applying two coats of french polish complete all as specified and as directed.

M & L preparation of old treated wooden surfaces of Peg set of Six as per drawing No- FD-80(M) and applying two coats of french polishcomplete all as specified and as directed.

M & L preparation of old treated wooden surfaces of Peg set of Three as per drawing No-FD-80(M) FD-253 and applying two coats of french polish complete all as specified and as directed.

M & L preparation of old treated wooden surfaces of Stool 600mm high as per drawing No- FD 28 and applying two coats of french polish complete all as specified and as directed.

M & L preparation of old treated wooden surfaces of Sofa 4 seater as per drawing No-FD-281/373 and applying two coats of french polish complete all as specified and as directed.

M & L preparation of old treated wooden surfaces of Sofa 3 seater as per drawing No- FD-258 and applying two coats of french polish complete all as specified and as directed.

M & L preparation of old treated wooden surfaces of Sofa set 5 seater(one 3 seater and two single seaters) as per drawing No FD-373/281 and applying two coats of french polish complete all as specified and as directed.

M & L preparation of old treated wooden surfaces of Table without drawer, 900x600mm size, as per drawing No- FD-42/284 and applying two coats of french polish complete all as specified and as directed.

M & L preparation of old treated wooden surfaces of Table OR, 900x600mm size, as per drawing No-FD-223 and applying two coats of french polish complete all as specified and as directed.

M & L preparation of old treated wooden surfaces of Table office officer as per drawing No- DB 4121 and applying two coats of french polishcomplete all as specified and as directed.

M & L preparation of old treated wooden surfaces of Table Bed side as per drawing No-FD-28/276 and applying two coats of french polish complete all as specified and as directed.

M & L preparation of old treated wooden surfaces of Table office clerk as per drawing No-DB 4120 and applying two coats of french polish complete all as specified and as directed.

M & L preparation of old treated wooden surfaces of Table Dining, 1200x900mm size, as per drawing No-FD 273 and applying two coats of french polish complete all as specified and as directed.

M & L preparation of old treated wooden surfaces of Table, 900x900mm size, as per drawing No- FD 291 and applying two coats of french polish complete all as specified and as directed.

M & L preparation of old treated wooden surfaces of Table Card, as per drawing No- FD-91/352 and applying two coats of french polish complete all as specified and as directed.

M & L preparation of old treated wooden surfaces of Table writing, as per drawing No- FD-33/275 and applying two coats of french polish complete all as specified and as directed.

M & L preparation of old treated wooden surfaces of Table with drawer, 900x600mm size, as per drawing No- FD-41/283 and applying two coats of french polish complete all as specified and as directed.

M & L preparation of old treated wooden surfaces of Table dressing Gents with mirror, as per drawing No- FD-230/382/379 and applying two coats of french polish complete all as specified and as directed.

M & L preparation of old treated wooden surfaces of Table Centre, as per drawing No- FD-214/274 and applying two coats of french polish complete all as specified.

M & L preparation of old treated wooden surfaces of Teapoy as per drawing No- FD-278 and applying two coats of french polish complete all as specified and as directed.

M & L preparation of old treated wooden surfaces of Table Peg as per drawing No- FD-25/277 and applying two coats of french polish complete all as specified and as directed.

M & L preparation of old treated wooden surfaces of Table Dining for 8 persons as per drawing No-FD-30/239/273 and applying two coats of french polish complete all as specified and as directed.

M & L preparation of old treated wooden surfaces of Table Dining for 6 persons as per drawing No-FD-30/239/273 and applying two coats of french polish complete all as specified and as directed.

M & L preparation of old treated wooden surfaces of Side Board as per drawing No- FD-26/241 and applying two coats of french polish complete all as specified and as directed.

M & L preparation of old treated wooden surfaces of Table dressing Ladies with mirror, as per drawing No- FD-251 and applying two coats of french polish complete all as specified and as directed.

M/s REETA ENTERPRISES

Albert Rebello and Company

WELTRONENGINEERINGSERVICES

PRIYADARSHINI CONSTRUCTIONS

SHANMUGA TRADERS

Anaswara Constructions

SRI CHAKRA CABINETS

Ms GHOSH AND SONS