Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.2 LAccepted-AOC | ₹1.2 L | L1 | Accepted-AOC 1st lowest |
| 2 | L2₹1.3 L+₹8,754.90 (7.49%)Rejected-AOC | ₹1.3 L+₹8,754.90 (7.49%) | L2 | Rejected-AOC 2nd lowest |
| 3 | L3₹1.3 L+₹13,578.30 (11.6%)Rejected-AOC | ₹1.3 L+₹13,578.30 (11.6%) | L3 | Rejected-AOC 3rd lowest |
| Sl No | Description | Qty | Unit | THOMAS P K L3 | N K Mohamed Ayub L2 | HARILAL.A.S L1 |
|---|---|---|---|---|---|---|
| 1.00Building Maintenance | ||||||
| 1.00 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 0.29 | cum | 385 ₹110.88 | 380 ₹109.44 | 358.43 ₹103.23 Lowest |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.29 | cum | 9,800 ₹2,822.4 | 9,700 ₹2,793.6 | 9,202.9 ₹2,650.44 Lowest |
| 1.00 | OD271837/2025-2026:Steel work for purlin/single section with MS tubes including cutting ,hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete (Observed data as per 50.10.1) | 411.3 | kg | 170 ₹69,920.32 | 161 ₹66,218.66 | 154.16 ₹63,405.39 Lowest |
| 1.00 | OD271838/2025-2026:Providing and fixing Aluminium profile sheets (size, shape and pitch of corrugation as
approved by Engineer-in-charge) 0.46mm or nearest availble thickness. The sheet shall be fixed
using self drilling/self tapping screws of size(5.5x55mm) with EPDM seal, complete upto any
pitch in horizontal/vertical or curved surfaces excluding the cost of purlins, rafters and trusses
and including cutting to size and shape wherever requiredmicrons epoxy primer on both side of
the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25
microns minimum to avoid scratches during transportation and should be supplied in single
length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self
drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in
horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and
including cutting to size and shape wherever required. | 54 | sqm | 805 ₹43,470 | 803 ₹43,362 | 755.89 ₹40,818.06 Lowest |
| 1.00 | 50.18.9.19.2:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 m dia 4 Kgf/cm2 - External work - Exposed on wall | 8.7 | metre | 365 ₹3,175.5 | 360 ₹3,132 | 341.8 ₹2,973.66 Lowest |
| 1.01 | OD472454/2025-2026:providing and fixing 200mm wide square uPVC rain water gutter including all necessary fittings and making necessary connections complete as per the direction of engineer in charge at site. | 20 | metre | 550 ₹11,000 | 503 ₹10,060 | 475.18 ₹9,503.6 Lowest |
Tender Value
₹1.3 L
EMD Value
₹3,177
Closing Date
6 Mar 2026, 3:00 pmClosed
O/O AE LSGD NAYARAMBALAM G.P
O/O AE LSGD NAYARAMBALAM G.P
125/ 2025-26 PARKING SHED CONSTRUCTION AT FAMILY HEALTH CENTRE
2026_LSGD_841026_1
125/ 2025-26 PARKING SHED CONSTRUCTION AT FAMILY HEALTH CENTRE
Open Tender
Civil Works - Buildings
Item Rate
NAYARAMBALAM G.P
Please refer Tender documents.
10 documents required · 10 mandatory
₹555
Yes
₹3,177
Yes
2 Jun 2026
26 Feb 2026
7 Mar 2026
26 Feb 2026
6 Mar 2026
26 Feb 2026
Building Maintenance
2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
OD271837/2025-2026:Steel work for purlin/single section with MS tubes including cutting ,hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete (Observed data as per 50.10.1)
OD271838/2025-2026:Providing and fixing Aluminium profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.46mm or nearest availble thickness. The sheet shall be fixed using self drilling/self tapping screws of size(5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever requiredmicrons epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
50.18.9.19.2:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 m dia 4 Kgf/cm2 - External work - Exposed on wall
OD472454/2025-2026:providing and fixing 200mm wide square uPVC rain water gutter including all necessary fittings and making necessary connections complete as per the direction of engineer in charge at site.
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1418026.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.05 MB
Tendernotice_2.pdf
PDF • 2.24 MB
BOQ_1418026.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .