Construction of Library Building at Village Lilva deva Taluka.Govindguru Limdi (Jhalod) under 2202 New Gujarat Pattern (TASP) 2025-2026. Dist.Dahod.

No. figures Amount

Civil Work

1 Excavation for foundation upto 1.5M depth including sorting 115.00 Cu.m. 160.89

out and stacking of useful materials and disposing of the

excavated stuff upto 50 Meter lead.in Dense or Hard Soil.

2 Providing and laying cement concrete 1:4:8 (1- Cement : 4- 16.00 Cu.m. 2679.92

coarse sand : 8- hand broken stone aggregates 40 mm nominal

size) and curing complete excluding cost of formwork in (A)

Foundation and Plinth .

3 Brick work using common burnt clay building bricks having 8.20 Cu.m. 3853.23

crushing strength not less than 35 Kg. / Sq. Cm. in foundation

and plinth in Cement motar 1:6 (1- cement :6-fine sand) (b)

conventional.

4 Providing and laying cement concrete work M-200 (1- Cement : 24.00 Cu.m. 4153.88

1.5- Coarse sand : 3- graded stone aggregates 20 mm nominal

size) and curing complete excluding cost of formwork and

reinforcement for reinforced concrete work in ( A ) Foundations

footing base of columns and mass concrete

5 Providing and Laying ordinary cement concrete M-200 (1- 3.10 Cu.m. 10869.51

Cement 1.5- coarse sand : 3- graded stone aggregates 20 mm

nominal size) and finishing smooth with curing etc. complete

including the cost of formwork but excluding the cost of

reinforsement for R.C.C work in Columan up to plinth

6 Providing and Laying ordinary cement concrete M-200 (1- 9.15 Cu.m. 7877.05

Cement 1.5- coarse sand : 3- graded stone aggregates 20 mm

nominal size) and finishing smooth with curing etc. complete

including the cost of formwork but excluding the cost of

reinforsement for R.C.C work in Ground Beam

7 Filling available excavated earth (excluding rock) in 90.00 Cu.m. 137.47

trenches. plinth, sides of foundations etc. in layers not

exceeding 20cm. in depth consolidating each disposited

layer by ramming and watering.

layers of 20cm. thickness including watering, ramming and

consolidating etc. completed.

9 Filling in plinth with sand under floors including watering 11.60 Cu.m. 419.82

ramming, consolidating and dressing etc. Complete

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

10 Providing and laying cement concrete 1:2:4 (1- Cement : 2 17.30 Cu.m. 3653.61

coarse sand : 4- stone aggregates 20 mm nominal size) and

curing complete excluding cost of formwork in Foundation and

11 Brick work using common burnt clay building bricks having 38.00 Cu.m. 4141.66

crushing strength not less than 35 Kg. / Sq. Cm. in

Superstructure in Cement motar 1:6 (1- cement :6-fine sand)

brick work in superstructure above plinth level up to floor two

level (B) Conveentional

12 Providing and Laying ordinary cement concrete M-200 (1- 8.40 Cu.m. 10869.51

Cement 1.5- coarse sand : 3- graded stone aggregates 20 mm

nominal size) and finishing smooth with curing etc. complete

including the cost of formwork but excluding the cost of

reinforsement for R.C.C work in Column

13 Providing and Laying ordinary cement concrete M-200 (1- 1.50 Cu.m. 10430.85

Cement 1.5- coarse sand : 3- graded stone aggregates 20 mm

nominal size) and finishing smooth with curing etc. complete

including the cost of formwork but excluding the cost of

reinforsement for R.C.C work in Lintel

14 Providing and Laying ordinary cement concrete M-200 (1- 17.00 Cu.m. 7665.49

Cement 1.5- coarse sand : 3- graded stone aggregates 20 mm

nominal size) and finishing smooth with curing etc. complete

including the cost of formwork but excluding the cost of

reinforsement for R.C.C work in Slab

15 Providing and Laying ordinary cement concrete M-200 (1- 8.80 Cu.m. 7877.05

Cement 1.5- coarse sand : 3- graded stone aggregates 20 mm

nominal size) and finishing smooth with curing etc. complete

including the cost of formwork but excluding the cost of

reinforsement for R.C.C work in Beam

16 Providing ISI Mark T.M.T Bar 415 Fe reinfircement for R.C.C. 7370.00 Kg. 68.33

work including binding, and placing in position complete upto

floor two level.

17 Providing 10mm thick cement plaster in single coat on 115.60 Sq.m. 172.04

brick/concrete walls for interior plastering upto floor two level and

finished even and smooth in (i) Cement mortar 1:6 (1-cement:6-

18 Providing 15mm thick cement plaster in single coat on 186.10 Sq.m. 201.79

brick/concrete walls for interior plastering upto floor two level and

finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-

19 Providing 20mm thick cement plaster in single coat on single or 236.00 Sq.m. 229.15

half brick walls for interior plastering upto floor two level and

finished even and smooth in (ii) Cement mortar 1:4 (1 cement :4-

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

20 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm 107.50 Sq.m. 1434.75

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand)

on new surface or fixing on existing flooring by adhesive material

including dismentaling of existing flooring and jointed with color

cement slurry including finised withflush pointing & cleaning the

surface etc. complete for lightshade (double Vitrified)

21 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' 39.70 Sq.m. 1120.36

in flooring treads of steps and landing laid on a bed of 12mm

thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing

with flush pointing in white cement. (Double Charged)

22 Provoding and fixing steel door with shutter with frame 50 x 50 x 3.55 Sq.m. 2751.54

6 mm. iron angle and BG 18 mm. steel platewith hinges, handle,

stopper, locking arrangement etc. steel work welded in built

section cutting hosting, Finishing on position two coats of oil paint

and one coat etc. comp.

23 Providing and fixing window having extruded aluminum Colour 20.30 Sq.m. 1705.67

Powder Coated section frame main outer size 63.50 x 38.10 x

1.95 mm(of Jindal Section no:4605,@ Wt 1.094 Kg / Rmt),

horizontal two track member size 61.85 mm x 31.75 mm x

1.20mm (of Jindal Section no: 8687 @ wt.of 0.695 Kg/mt),

vertical member of size 61.85 mm x 31.75mm x 1.30 mm (of

Jindal Section no:8758 @ wt.of 0.0.659 Kg/mt) with sliding

shutters of horizontal member size 40mm x 18mm x 1.29mm (of

Jindal Section no:8949 @ wt.of 0.456Kg/mt), vertical member of

size 40mm x 18mm x 1.29mm (of Jindal Section no:8947 @

wt.of 0.456Kg/mt/ Section 8948, @ Wt. 0.457 Kg/mt) with 5 mm

thick transparent bronze colour tinted float glass with powder

coated aluminum fittings and fixtures and transparent silicon

sealant glass fixing to frame as per details etc complete for

24 Providing and fixing M.S. grills of required pattern to wooden 385.00 Kg. 110.31

frames of windows etc. with M.S. flats at required spacings and

frame alround, square or round bars with round headed bolts and

nuts or by screws.(A)plain grill.

25 Providing and fixing M.S. round or square bars with M.S.flats at 240.00 Kg. 70.50

required spacing in wooden frames of windows and clerestory

26 Applying two coats of putty & two coats of primer of approved 301.70 Sq.m. 40.59

brand and manufacture on new wall surface to give an even

shade including thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered smooth.

27 Distempeing (Two coats) with oil bound washable distemper of 301.70 Sq.m. 77.30

approved brand and manufacture and of required shade on wall

surfaces to give an even shade, over and including a priming

coat with alkali resistance primer of approved brand after

thoroughly brushing the surface and otherforeign matter and also

including preparing the surface even and sand parpered smooth.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

28 Finishing wall with water proofing cement paint of on wall 236.00 Sq.m. 62.43

surfaces (Two coats) to give an approved brand and

manufacture and of required shape even shade after thoroughly

brushing the surface to remove all dirt and remains of loose

powered materials.

29 Providing and Applying Damp Proof over Celing Slab (2 Coats) 110.00 LUMP 654.61

Total of Civil Work

Electrification Work

30 Point wiring for Light/ Bell with 2-1.5 sq.mm & earth wire of 1.5 14.00 Pt. 485.81

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch / bell push &

accessories and earth continuity of following type, erected on

PVC/ Metallic/ Wooden box, single mounting base frame

covered with textured/metallic/ white front plate modules erected

on/ in wall/ ceiling as per pipe erected, with necessary Lamp

holder/ ceiling rose/ H.D. Connector as directed.(f) with medium

class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete (Cat.III)

31 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm 11.00 Pt. 674.68

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length, in below

type of pipe erected with 6A Modular type switch and hum free

EME step type electronic fan regulator mounted and

accessories with earth continuity of following type erected on

PVC / Metallic/Wooden box, single mounting base frame covered

with textured/metallic/white front plate modules erected on / in

wall / ceiling as per pipe erected. with necessary ceiling rose /

H.D.Connector as directed.(f) with medium class Rigid PVC pipe

and accessories erected concealed in wall/ceiling complete

32 Point wiring for on board Looped Plug with 6A Modular type 4.00 Pt. 257.55

switch & 5 pin socket erected on PVC/ Metallic/Wooden box,

single mounting base frame covered with textured /

metallic/white front plate modules erected on / in wall / ceiling

with following type accessories (Cat.III)

33.a Providing following type of Modular Type Accessories mounted 5.00 Ea. 151.50

with PVC/ metallic/ Wooden box, single mounting base frame

covered with textured/ metallic/white front plate, modules erected

with necessary connections as per site situation directed by

Engineer In charge. (1) One No. SP 6 Amp. (Cat.III)

33.b (2) One No 5 pin plug (Cat.III) 5.00 Ea. 151.50

33.c (7) Blank Plate Single (Cat.III) 4.00 Ea. 25.25

33.d (8) Computer RJ-45 socket (Cat.III) 2.00 Ea. 160.59

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

34 Providing and erecting Mains with 1.1 KV grade FRLS PVC 90.00 Mtr. 82.82

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected concealed in /flushed on wall/ceiling,

with 1.5 sq. mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following size (A) With

medium class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq.

35 (A) With medium class Rigid PVC pipe and accessories, (a) 2 50.00 Mtr. 62.62

wire 1.5 sq. mm

36 providing and erecting Mains with 1.1 KV grade FRLS PVC 33.00 Mtr. 147.46

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm

copper conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size, (A) with medium class

Rigid PVC pipe and accessories, (b) 2 wire 6 sq. mm

37 Supplying & erecting approved make LAN cable of following size 30.00 Mtr. 47.47

in existing pipe as per direction, [C] CAT -

38 Providing & erecting Switch board for Computer or electric 2.00 Ea. 1133.22

apparatus consisting of following modular type accessories

mounted with PVC/ Metallic concealed/ open box with single

mounting base frame covered with textured/ metallic/ white front

plate, modules erected with necessary connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug For Modular Type Accessories (Cat.III)

39 Supplying and erecting LED indoor fittings with LEDs of wattage 14.00 Ea. 535.30

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel

conforming to IS: 513/CRCA/ aluminium die cast powder coated

and high U.V. & corrosion resistance with diffuser with company

mark/name 160V to 270V, Power Factor more than 0.95, THD <

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

between the ranges shown.) (A) Tube Light with integral driver

(v) 36-40 Watts, Surge-2 KV, IP-20, conventional 4 feet (Cat.III)

40 Providing and erecting Miniature circuit breaker single pole 6A to 10.00 Ea. 112.11

25A suitable to operate on 240 V A.C. system and having

breaking capacity 10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI Mark (Cat.III)

41 Providing & erecting 240 V MCB double pole switch for motor & 1.00 Ea. 299.97

inductive load (C Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following capacity (A)

6 to 32 Amp.(Cat.III)

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

42 Sheets steel powder coated enclosure suitable for incorporating 1.00 Ea. 176.75

One/Two nos.MCB.

43 Providing and erecting Sheet Steel powder coated MCB 1.00 Ea. 1492.78

distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 &

IEC 61439-1 & 3 without MCB to house appropriate nos. of

MCBs.(The DBs should be used of same company of MCB to be

used) suitable for (A) single phase incoming and horizontal single

phase outgoing (b) sheet steel double door (IP-43) (iv) 12 way

44 Providing and erecting Approved make RCCBs conforming to IS: 1.00 Ea. 1969.50

12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for operation on single

phase 240 V,50Hz. having characteristic of quick action &

tripping with all advance feature & do not incorporate any

electronic component. for following Max. rating erected as

directed (i) 25 Amps.DP (Cat.III)

45 Providing & erecting Approved make Power Saving 50 Watt 11.00 Ea. 1948.29

Ceiling Fan with double ball bearing ISI mark with Condenser

230 volt A.C. 50 Hz 1200 mm sweep complete having 3blades

with aluminium blades with , canopy & 30 cm. down rod erected

with earthing.(Make shall be approved by Engineer in charge)

46 Supplying and erecting 19 / 20 mm. nominal bore Medium Class 5.50 Ea. 108.07

M.S. Pipe down rod erected duly painted for fan complete with

proper insulation without leakage and earthing.

47 Supplying & erecting Fan Hook of 10 mm M.S. Round bar 11.00 Ea. 43.43

grouted in RCC slab with Making the site as original.

48 Providing 2.5mm thick laminated acrylic sheet to cover the fan 11.00 Ea. 18.18

hook or Fan box.

49 Supplying & erecting earth pit of minimum bore dia.150mm size 1.00 Ea. 4591.46

approved make Earthing Electrode consisting Pipe-in-Pipe Technology

as per IS 3043-1987 made of corrosion free hot dipped G.I. Pipes

having Outer pipe dia of 50mm having 80-200 Micron galvanising,

Inner pipe dia of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic value

surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications with chamber and

heavy duty cover. (A)(approved make OEM has to submit test

certificate including value of earth resistance of installation duly

stamped and signed by agency and officer Incharge has to ensure the

value of earthing resistane mentioned in test Certificate) & having back

filling compound of (B) Inner chemical (CCM Compound)- Resistivity:-

0.2 ohm / meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt

at no load & dry form, Sulphar content:- <2%(C) Back fill Compound :-

Earthing compound should be capable to retain moisture for long time

Necessary test report must be submitted by Agency. (a) For Electrical

Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

50 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 1.00 Kg. 794.87

Total of Electrification Work

Total (Civil+Electric) TOTAL Rs.

i.e. Rupees Nineteen Lakh(s) Eighty Six Thousand Eight Hundred Nine And Paise Nine Only

I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

Net Rs. ___________________________ Total Rs. ________________________

In words ____________________ In words ____________________

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge

for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017

Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as

per actual mix design the cost of difference of cement consumption have been deducted from the rate of original item at

the rate of input rate mentioned in all the tender.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and found

Deputy Executive Engineer Deputy Executive Engineer

Panchayat (R & B) Sub Division Godhra Electrical Sub Division

JHALOD R&B Deptt. Godhra

Divisional Account Officer Executive Engineer

Panchayat (R & B) Division Godhra Electrical Division Executive Engineer

DAHOD R&B Deptt. Godhra Panchayat (R & B) Division