Renovation of ITI Workshop and Hostel Building at Jamnagar

Name of Work :- RENOVATION OF ITI WORK SHOP AND HOSTEL BUILDINGS AT JAMNAGAR.

BILL OF QUANTITIES

Sr. No. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

and reference to book of specifications)

1 Dismentaling tiled of stone floors laid in 3045.00 Sqm. 50.27

mortar including stacking of serviceable

materilas and disposal of unserviceable

materials with all lead and lift.

2 Demolition of Brick work and stone masonry 25.00 Cum. 576.29

including stacking of serviceable materials

and disposal of unserviceable materials with

all lead and lift. (ii) in Cement Mortar

3 Dismentling doors, windows, ventilators etc. 190.00 No. 196.65

(wood or steel) shutters including

chowkhats architraves, holdfasts and other

attachment etc. complete and stacking them

within all lead and lift.(i) Not exceeding

4 Dismantling santtary fittings like wash basin 62.00 No. 424.09

. W.C. pan Indian and European type,

flushing tank etc. including stacking the

materials with all lead and lift.

5 Removing and scraping of old deteriorated 4917.00 Sqm. 20.36

plaster of any thickness fromm wall / R.C.C

member including stacking of serviceable

material and disposal of unserviceable from

site of work with all lead and lift

6 Brick work using common burnt clay 21.00 Cum. 4568.40

building bricks having crushing strength not

less than 35 kg./Sq.Cm. in Super structure in

Cement Mortar 1:6 (1- Cement : 6 -fine

sand)(B) Conventional

7 Providing 10mm thick cement plaster in 1601.00 Sqm. 125.09

single coat on brick concrete walls for

interior plastering upto floor two level and

finished even smooth in (i) Cement Mortar

1:4 (1-Cement:4-sand)

8 Providing 15mm thick cement plaster in 2012.00 Sqm. 184.68

single coat on Rough (Similar)side of single

or half brick walls for interior plastering

upto floor two level and finished even and

smooth in (i) Cement mortar 1:3 (1-cement:3-

9 20mm thick sand faced cement plaster on 1518.00 Sqm. 323.21

walls upto height 10 metres above ground

level consisting of 12mm thick backing coat

of C.M. 1:3 (1-cement : 3-sand) and 8mm

thick finishing coat of C.M. 1:1 (1-cement : 1-

sand) etc. complete.

1 of 21 DTP of ITI Work shop & Hostel 12-25

Sr. No. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

and reference to book of specifications)

10 Providing and laying cement concrete 1:4:8 6.00 Cum. 2941.12

(1-Cement:4-coarse sand:8- crushed stone

aggregate 40mm nominal size) and curing

complete excluding cost of formwork in

foundation and plinth

11 Applying two coats of putty & two coats of 7566.00 Sqm. 40.59

primer of approved brand and manufacture

on new wall surface to give an even shade

including thoroughly brushing the surface

free from mortar dropping and other foreign

matter and sand papered smooth.

12 Wall painting (Two coats) with plastic 7566.00 Sqm. 86.37

emulsion paint of approved brand and

manufacture on undecorated wall surface to

give an even shade including throughly

brushing the surface free from mortar

droppings and other foreign matter and

sand papered smooth.

13 Finishing wall with weather proof exterior 3732.00 Sqm. 122.13

emulsion paint on wall surface (two coats) to

give an required shape aeven shade after

throguhly brushing the surface to remove all

dirt, and remains of loose powdered

materials etc.comp.

14 Providing 20mm thick water proof cement 53.00 Sqm. 327.24

plaster for sunk in single coat on brick

concrete wall for interior plastering upto

floor two level finished even and smooth (ii)

Cement Mortar 1:3 (1-Cement:3-sand) and

mixing water proofing materials of approved

brand and manufacture in cement mortar in

proportion recommended by the

manufacturer for all floors.

15 Filling in foundation and plinth with brick 13.00 Cum. 625.47

Bats Chhara in layers of 20cm. thickness

including watering, remming and

consolidating etc. complete

16 Providing and laying coloured glazed tiles of 885.00 Sqm. 1523.66

the size 300 mm x 200 mm x 8 mm / 300 mm x

450 mm x 8 mm in skirting, risers of steps

and dedo on 10 mm. thick cement plaster

1:3 (1 cement : 3 coarse sand) & jointed with

white cement slurry.

17 Providing and laying white glazed tiles 6mm 293.00 Sqm. 964.47

thick in flooring treads of steps and landing

laid on a bed of 12mm thick cement mortar

1:3 (1-cement : 3-coarse sand ) finishing

with flush pointing in white cement.

2 of 21 DTP of ITI Work shop & Hostel 12-25

Sr. No. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

and reference to book of specifications)

18 Providing and laying cement concrete 1803.00 Sqm. 347.14

flooring 1:2:4 (1-Cement:2-coarse sand:4-

graded stone aggregate 20mm nominal size)

laid in one layer finished with a floating cost

of neat cement (B) 50mm thick

19 Providing and mixing water proofing 658.00 Bag. 49.25

materials in cement mortar in proportion

recommended by the manufacturer.

20 Providing and laying broken China Mosaic 1803.00 Sqm. 779.69

Flooring for Terrace using 12mm to 20mm

broken pieces of glazed tiles to be laid over

cement mortar 1:3 to plain or slope and to

be tempered to bring mortar crème out upto

surface using white cement including

rounding off junctions and extending them

up to 15cm. along the wall, clearing with

water and oxalic acid etc. as directed.

21 Providing and laying 25mm thick polished 241.00 Sqm. 1019.39

kota stone slab flooring over 20mm

(Average) thick base of cement mortar 1`:6

(1-cement:6-coarse sand) or L.M. 1:1.5 laid

over and jointed with grey cement slurry

including rubbing and polishing etc comp.

22 Providing & laying both side POLISHED 184.00 Sqm. 843.35

KOTAH STONE SHELVES to C.B. with

making the grooves in the walls and fixing

the kotah stone finishing the same with

cement mortar 1:2 etc. complete.

23 Providing & fixing cup board framing and 134.00 Sqm. 3191.60

shuttering of CRC sheet of 1.12mm including

cutting welding fixing with wall including

locking arangment and one coat of primer

oil painting etc.comp.

24 Repairing of cup board framing and 38.00 Sqm. 1045.35

shuttering of CRC sheet of 1.12mm including

cutting welding fixing with wall including

locking arangment and one coat of primer

oil painting etc.comp.

25 Repairs to collepsible gates by removing 21.00 Sqm. 1161.50

from walls for repairs and refixing after

repairs including cutting of damaged

channels, roller etc. & replacing by new

channels and rollers and also including two

coats of oil paints making it good.

26 Providing and fixing 18mm thick black 154.00 Sqm. 3174.43

granite stone in Jambs & sills for door over

10mm (Average) thick base of cement

mortar 1:3 (1-cement : 3-coarse sand) laid

over and jointed with grey cement slurry

including rubbing and polishing etc.

complete. 3 of 21 DTP of ITI Work shop & Hostel 12-25

Sr. No. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

and reference to book of specifications)

27 Providing and fixing window having 110.80 Sqm. 1591.87

extruded aluminum Colour Powder Coated

section frame main outer size 95mm x 24mm

x 1.17mm @ wt.of 0.738 Kg/mt, horizontal

Three track member size 92mm x 31.75mm x

1.30mm @ Wt.1.07 Kg/mt, vertical member

of size 92mm x 31.75mm x 1.50mm ,@ Wt.

1.06 Kg/mt with sliding shutters of horizontal

member size 40 mmx18mm x1.29mm @

wt.of 0.456 Kg/mt, vertical member of size

0.456Kg/mt with 5 mm thick transparent

bronze colour tinted float glass with powder

coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to

frame as per details etc

28 Providing and fixing standared extruded of 20.00 Sqm. 1175.55

alluminium section of size 63mm x 38.10mm

x 1.2mm , @ Wt. 0.643 Kg/mt with colour

Powder Coated alluminium frame for

ventilation with 5 mm thick frosted glass as

details etc complete for Ventilation

29 Providing and fixing 35mm thick shutters for 45.00 Sqm. 5338.30

doors, windows and clerestory windows

including Indian teak wood frames, 10cm. x

7cm. size including S. S . fixtures and

fastening including primer coat of approved

quality and two coats of oil painting etc.

complete. (II) Fully Panelled

30 Providing and fixing eco-friendly light weight calcium silicate 185.60 Sqm. 1674.58

false ceiling tiles having Tegular edge & 15 mm Thick

Densified edges on the Tile Periphery for Extra Strength The

Light weight calcium silicate ceiling tiles shall have , light

reflection 85% non-combustible as per B.S. 476 part IV, 100%

humidity resistance and also having thermal

conductivity0.043° w/m KC.for the best thermal Insulation .

The Light weight calcium Silicate tile shall be of approved

texture Fine fissured/ Spintone/Cosmos having NRC value of

0.5 & Globe having NRC value of 0.75 NRC or equivalent of

size 595 X 595 mm to be laid on true horizontal level

suspended inter locking metal grid of hot dipped galvanized

steel sections (galvanizing @120 grams per sqm including

both side) consisting of main ‘T’ runner suitably spaced at

joints to get required length and size of 24X38mm made from

0.30 mm thick (minimum) sheet, 1200mm centre to centre,

and cross ‘T’ of size 24X28mm made out of 0.33mm

(Minimum) sheet spaced 1200mm along spaced between

main ‘T’ at 600mm centre to centre to form agrid of

1200X600mm and secondary cross ’T’ of length 600mm and

size 24x28mm made of 0.30 mm thick (Minimum) sheet to be

interlocked at middle of the 1200X600mm panel to form grid

of size 600X600mm resting on periphery walls/partitions on a

perimeter wall angle pre-coated steel of size

(24X24X3000mm made of 0.40mm thick (minimum) sheet with

the help of rawl plugs at 450mm centre to centre with 25mm

long dry wall screws @ 230mm interval and laying 15mm

thick Densified edges light weight calcium silicate ceiling

tiles of approved texture (Fine Fissured/Cosmos/Spintone) in

the grid including, cutting /making opening for services like

diffusers, grills, light fittings, fixtures, smoke detectors etc.,

wherever required, Main ‘T’ runners to be suspended from

ceiling using G.I. slotted cleats of size 25X35X1.6mm fixed to

ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm

G.I. adjustable rods with galvanized steel level clips of size

85X30X0.8mm, spaced at 1200mm centre to centre long main

‘T’ bottom exposed with 24mm of all T-sections shall be pre-

painted with polyester baked paint, for all heights, as per

specifications, drawings and as directed by engineer-in-

4 of 21 DTP of ITI Work shop & Hostel 12-25

Sr. No. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

and reference to book of specifications)

31 Carring out plinth treatment to post 1991.00 Sqm. 124.35

construction / existing structure by spraying

chemical solution for termite control

treatment including labour and material

consistment with I.S.I specification. Using

Chlordene and Chiorpurfiles 20 EC. As Per

6131_paret-II Consentration Weight one

percent is recommended i.e one litre 20 EC

chemical emulsion with 19 liter give 1 %

concrentration inclusive of one litre

chemical emulsion appication at the rate of

5 Litre chemical / Sqm of surface is

recommended as per I.S

32 Providing and fixing 35mm thick shutters for 66.00 Sqm. 4641.01

doors, windows and clerestory windows

including Indian teak wood frames, 10cm. x

7cm. size including S. S. fixtures and

fastening including primer coat of approved

quality and two coats of oil painting etc.

complete. (I) Fully Glazed.

33 Providing and fixing MS pipe railing having 30.00 Rmt. 2149.28

hand rail 900mm height and horizontal pipe

top and bottom pipe size of 50mm x 50mm

and vertical baluster 50mm x 50mm size at

90cm c/c and 3 horizontal pipe size of 25mm

x 25mm at required spacing as per design

including oil paint , fasterning , hold fast

clamps , welding etc complete.

34 Repairs to doors and windows shutters incl. 109.00 Sqm. 684.78

repairing of broken components of teak

wood and providing missing components of

teak wood includi1g providing necessary

missing S. S . fixtures and fastenings and

touching with oil painting to match with

existing colour etc. Comp

35 Providing and fixing F.R.P. Frame size 100 x 101.00 Sqm. 2377.76

50 mm and 28mm thick FRP Depress panel

shutter having extra reinforcement on sides

and edges and in gel coat finish. The core of

the shutter is to be filled up with injected fire

retardant grade polyurethane foam done

insitu alongwith embendded wooden pieces

for stiffening and also for taking hinges and

fixtures The whole FRP Frame and shutter is

to be water proof, weather proof, termite

proof and rfesistance to mild acid /

Alkali,Rates are to be inclusive of S.s.

hinges with necessary screws and

alluminium fixtures anf fastening.

5 of 21 DTP of ITI Work shop & Hostel 12-25

Sr. No. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

and reference to book of specifications)

36 Repairs to Damaged alluminium section 111.00 Sqm. 813.05

Door window including replacing necessary

spares, such as screw. nuts, bolts, handles,

hinges, rubber lining, packing sheets etc.

and making the door window fuctional &

good looking, but excluding cost of glass,

door closer winding spring mosquitoes nets

etc. cost of all tools, plants, labour etc

including) (B) Double shutter alluminium

37 Servicing of rolling shutters including 9.00 No. 2532.07

cleaning, oiling greasing and make it

functioned such away that it con easily

closed or opened.

38 Providing and fixing M.S.PLAIN Grills of 3951.00 Kg. 118.17

required pattern with M.S.Flats at required

spacings and frame alround,square or

round bar,with round headed bolts and nuts

or by screws plain grill including approval

quality of primer and two coat of oil painting

39 Providing and fixing Rat Mesh Grill having 13.00 Sqm. 1506.92

55x55x6mm flat in square pattern with 12.5 x

12.5 mm 18 gauge S.S. Jali including

necessary nut, bolts , hold fasts two coat oil

painting and one coat of primer etc

40 Providing laying and jointing in true line and 209.00 Rmt. 72.64

level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every two

metre C/C or shall be concealed as directed

including necessary fittings etc. including

testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all

41 Providing laying and jointing in true line and 312.00 Rmt. 91.83

level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every two

metre C/C or shall be concealed as directed

including necessary fittings etc. including

testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all

6 of 21 DTP of ITI Work shop & Hostel 12-25

Sr. No. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

and reference to book of specifications)

42 Providing laying and jointing in true line and 438.00 Rmt. 195.66

level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every two

metre C/C or shall be concealed as directed

including necessary fittings etc. including

testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all

43 Providing, laying and jointing in true line and 242.00 Rmt. 897.78

level U.P.V.C. SWR Type B-Pipe conforming

to IS 13592-1992 with one end plain and

other end socketed with rubbering & fitting

conforming to IS : 14735-1999 of approved

make for drainage system pipe line, pipe

shall be jointed with each other with rubber

lubricant, pipe shall be fixed on wall using of

PVC clamp of the size 160mm diameter x

210mm length x 196mm high at every

2000mm center to center or shall be

concealed in walls as directed including

necessary fittings such as bends, shoes etc.

including testing of pies and joints and

jointed with adhesive solvent cement

including cost of all materials.(B)

44 Providing and fixing concealed center point 25.00 Rmt. 170.35

to wall ceilling & Floor CPVC (SDR 13.5)

PIPE having National Sanitation Foundation

(NSF) seal for potable water of following dia.

nominal bore tube fitting and clamps

including making good the wall, ceilling and

floor etc. complete. 15mm dia

45 Providing and fixing concealed center point 50.00 Rmt. 253.82

to wall ceilling & Floor CPVC (SDR 13.5)

PIPE having National Sanitation Foundation

(NSF) seal for potable water of following dia.

nominal bore tube fitting and clamps

including making good the wall, ceilling and

floor etc. complete. 25mm dia

46 Providing and fixing PVC pipe of 6 Kg / F / 261.00 Rmt. 343.40

Sq.M. Water pressure polythene pipe of

110mm inside dia. high density complete

including fixing by clamps to wall including

making food the wall ceiling and floor etc.

47 Providing and fixing 50mm dia Gun metal 15.00 No. 1878.60

check or Non return fullway wheel valve.

48 Providing and fixing wash down water closet 4.00 No. 1689.73

(European type W.C.Pan / Anglo Indian) with

integral "P" or "S" traps including jointing

the trap with soil pipe in canal mortar 1:1 (1-

Cement:1-fine sand) providign and fixing

seat cover W.C.) 32mm dia galvanized steel

tube flush pipe etc. comp.

7 of 21 DTP of ITI Work shop & Hostel 12-25

Sr. No. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

and reference to book of specifications)

49 Providing and fixing water closet closet 21.00 No. 1978.59

squatting pan (Indian type W.C.pan / Orrissa

pan) size 580mm including Foot rest G.I.

inlet connection & C.P. Brass Flush cock of

25mm dia. etc. comp.

50 Providing and fixing flat back Urinal of 430 x 22.00 No. 1432.18

260 x 350mm size white colour including

necessary PVC waste pipe, PVC waste

coupling & 50mm C.P. Brass Stop cock

fitting all labour and materials.

51 Providing and fixing flat back wash basin of 25.00 No. 2363.40

550 x 400mm size including C.I. or M.S.

brackets fixing in wall C.P. brass work of

32mm dia,,. fisher union of 32mm, pillar cock

of 15mm dia, PVC waste pipe, PVC

connection, brass stopcock of 15mm dia

52 Providing and fixing Brass Chromium plated 68.00 No. 186.82

screw down bib tap of 15 mm size.

53 Providing and fixing C.P. brass shower rose 13.00 No. 282.16

with 15mm or 20mm inlet.(A) 100mm dia.

54 Providing and fixing PVC SWR Nahni Trap IS 64.00 No. 588.26

14735 for drain with jali of the following

nominal diameter of self cleansing design

with C.I. Scrwed down or hinged grating

including the cost of cutting and making

good the walls.(A) 100mm diameter

55 Providing and fixing 5mm thick glass mirror 11.40 Sqm. 2544.19

machine cut belveled edge mounted on wall

with special type wall touch SS mirror

bracket fixing with necessary plugs.

56 Constructing brick masonry chamber for 20.00 No. 2932.92

underground C.I. Inspection chamber and bends

with bricks having crushing strength not less

than 35Kg. / Cm2 in C.M. 1:5 R.C.C. top cover

with frame of capacity 10.00 M. T. foundation

concrete 1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed concrete

etc. complete. (II) Inside dimensions 455mm x

610mm and 450mm deep for one or two inlets.

57 Providing erecting and fixing Tripal layer ISI 14000.00 Ltr. 12.12

water tank of required capacity each with all

necessary fittings , tank cover and as

required connection etc. complete on

58 Providing and fixing Sign board on 5mm 15.00 Sqm. 2903.75

thick ACP sheet and letter with sticker sheet

including fixing etc complete.

59 Structural steel work ( Confirming to IS 4923- 3103.00 Kg. 131.82

1997) riveted, bolted or welded in builtup for

all type sections, in framed work, including

cutting, hoisting, fixing in position and

applying a priming coat of approved steel

primer all complete as per the structural

designs and directions of Engineer in

8 of 21 DTP of ITI Work shop & Hostel 12-25

Sr. No. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

and reference to book of specifications)

60 Providing and fixing Colour coated 38.00 Sqm. 542.37

corrugated /semi corrugated Galvalume

sheet 0.50 mm thick roofing fixed with GI "J"

or "L" hooks bolts and nets 8mm dia with

bitumen washing filled with white lead

complete excluding cost of purlins, rafters

61 Construction of Septic Tank of size 3.50 x 2.00 No. 47954.80

2.00 x 1.80 including excavation , BBCC,

RCC, Reinforcement , Brick Masnory

finished by 15mm plaster in cement mortar

(1:3) etc complete as per drawing.

62 Construction of Septic Tank of size 7.00 x 2.00 No. 141955.50

4.00 x 1.80 including excavation , BBCC,

RCC, Reinforcement , Brick Masnory

finished by 15mm plaster in cement mortar

(1:3) etc complete as per drawing.

63 Providing sock pit of 5.00 Cu.M. volume 4.00 No. 2475.20

including excavating and filling brick bats

with dry masonry work at top for 45cm.

height including covering the top with stone

including providing vatas in C.M. 1:3 with

finishing curing etc. complete as directed.

64 Construction of Ramp of size 2.00 x 1.20 1.00 No. 25623.70

including BBCC, Brick Masnory , finished by

15mm plaster in cement mortar (1:3) etc

complete as per drawing.

65 Drilling of 215mm dia bore hole in over 100.00 Rmt. 551.46

burden strata (alternative layer of lime stone

and yellow stridly formation) by DTH regi. up

to required depth including fixing of 175/180

dia ERW/PVC pipe if required drilling by

165mm dia bore hole in hard rock strata

DTH drilling method up to total 120 mt.

66 Pro. & Fix. 160mm dia PVC pipe of 10 kg / 20.00 Rmt. 474.70

cm2 for casing pipe.

Total Rs.of Civil Item Rs.

Electrical Items

67 Point wiring for Light / Bell with 2-1.5 1.00 Pts. 375.72

sq.mm & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up

to 10 mtr length , in below type of pipe

erected with 6A Modular type switch / bell

push & accessories and earth continuity of

following type, erected on PVC /

Metallic/Wooden box, single mounting base

frame covered with textured/metallic/white

front plate modules erected on / in wall /

ceiling as per pipe erected, with necessary

Lamp holder/ceiling rose as directed.(e) in

existing pipe erected flushed on wall/ceiling

complete.Cat III (Cu Wire: Polycab, RR

GreatWhite,Axelon,Accessories:Legrand,Hi

Fi,L&K,Wonder,HPL,Anchor)

9 of 21 DTP of ITI Work shop & Hostel 12-25

Sr. No. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

and reference to book of specifications)

68 (j) in existing pipe erected concealed in 196.00 Pts. 410.06

wall/ceiling complete. Cat III (Cu

Wire:Polycab,RR Kabel,

Adcab,GreatWhite,Axelon,Accessories:Legr

and,HiFi,L&K,Wonder,HPL,Anchor)

69 Point wiring for FAN with 2-1.5 sq.mm & 32.00 Pts. 522.17

earth wire of 1.5 sq.mm (Green) both are of

.ISI marked 1.1 KV Grade FRLS PVC

insulated multi strand copper wires up to

mtr length, in below type of pipe erected

with 6A Modular type switch and hum free

EME step type electronic fan regulator

mounted and accessories with earth

continuity of following type erected on PVC /

Metallic/Wooden box, single mounting base

frame covered with textured/metallic/white

front plate modules erected on / in wall /

ceiling as per pipe erected. with necessary

ceiling rose as directed.(e) in existing pipe

erected flushed on wall/ceiling complete.

(Cu Wire:Polycab,RR Kabel,

Adcab,GreatWhite,Axelon,Accessories:Legr

and,HiFi,L&K,Wonder,HPL,Anchor)

70 Point wiring for on board Looped Plug with 135.00 Pts. 257.55

6A Modular type switch & 5 pin socket

erected on PVC / Metallic/Wooden box,

single mounting base frame covered with

textured / metallic/white front plate modules

erected on / in wall / ceiling with following

type accessories. Cat III

(Make:Legrand,HiFi,L&K,Wonder,HPL,Anch

71 Providing following type of Modular Type 11.00 Nos. 180.79

Accessories mounted with PVC /

metallic/Wooden box, single mounting base

frame covered with textured / metallic/white

front plate , modules erected with

necessary connections as per site situation

directed by Engineer In charge.(9) 16 Amp.

SP one way switch Cat.III

(Make:Legrand,HiFi,L&K,Wonder,HPL,Anch

72 (10) 6/16Amp. Universal socket Cat.III 11.00 Nos. 199.98

(Make:Legrand,HiFi,L&K,Wonder,HPL,Anch

10 of 21 DTP of ITI Work shop & Hostel 12-25

Sr. No. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

and reference to book of specifications)

73 Providing and erecting ISI mark Medium 703.00 Mtrs 24.24

class RIGID PVC PIPES of following size

complete to be erected on/in wall or ceiling

erected with necessary PVC fittings &

Junction boxes fixed with adhesive solution

& Clamps with following dia of pipes, in

approved manner as directed. (a)20 mm

(Make:Nihir,Vraj, Polycab,

Precision,GreatWhite,Anchor)

74 Providing & erecting PVC Corrugated 15.00 Mtrs 21.21

Flexible Conduit with required nos. of

coupling, PVC bushes, Check-nuts etc.

complete of following sizes.(2) 25 mm

75 Providing and erecting Mains with 1.1 KV 866.00 Mtrs 62.62

grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in

following type of pipe to be erected

concealed in /flushed on wall/ceiling, with

1.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for

earth continuity of following size.(E) in

existing pipe. (b) 2 wire 2.5 sq. mm

(Make:Polycab,RR Kabel,

Adcab,GreatWhite,Axelon)

76 Providing and erecting Mains with 1.1 KV 124.00 Mtrs 121.20

grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in

following type of pipe to be erected in / on

wall / ceiling with 2.5 sq. mm copper

conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of

following size.(E) in existing pipe (b) 2 wire

(Make:Polycab,RR Kabel,

Adcab,GreatWhite,Axelon)

77 providing and erecting Mains with ISI 42.00 Mtrs 12.12

marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with

heat resistant PVC insulated conforms to IS

694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel,

relays, power switchgears, motor starters &

control wiring) with required size of copper

lugs, nuts and bolts if required.(a) One wire

78 (e) One wire 6.00 sq. mm 100.00 Mtrs 56.56

79 (f) One wire 10.00 sq. mm 16.00 Mtrs 91.91

80 (h) One wire 25.00 sq. mm 2.00 Mtrs 236.34

81 (i) One wire 35.00 sq. mm 38.00 Mtrs 300.98

11 of 21 DTP of ITI Work shop & Hostel 12-25

Sr. No. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

and reference to book of specifications)

82 Supplying and erecting Flexible PVC 46.00 Mtrs. 46.46

insulated multi strand multi core 1.1 kv

grade ISI marked copper wires of following

size to be erected as directed.(e)

Sq.mm 3 core round PVC sheathed

(Make:Polycab, RR

Kabel,Adcab,GreatWhite,Axelon)

83 Providing & erecting Switch board for 3.00 Nos. 1133.22

Computer consisting of following modular

type accessories mounted with PVC /

Metallic concealed/open box with single

mounting base frame covered with

textured/metallic /white front plate,modules

erected with necessary connections as

1 no. 6A/16A universal plug-switch

3 nos. 6A Switch

3 nos. 6A 5 pin Plug For Modular Type

(Make:Legrand,HiFi,L&K,Wonder,HPL,Anch

84 Bakelite adopter for Holder to be erected. 164.00 Nos. 9.09

85 Supplying and erecting LED indoor fittings 180.00 Nos. 373.70

with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing

used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/

aluminium die cast powder coated and high

U.V. & corrosion resistance with diffuser

with company mark/name 160V to 270V,

Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select

any wattage capacity between the ranges

shown.) (A) Tube Light with integral driver

(iv) 22-24 Watts, Surge - 2KV,IP-20,

conventional 4 feet Cat III

(Make:Jaquar,Wipro,Crompton,Havells,Baja

12 of 21 DTP of ITI Work shop & Hostel 12-25

Sr. No. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

and reference to book of specifications)

86 Supplying and erecting LED street light / 23.00 Nos. 5976.17

Flood light fittings with High power White

LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency

more than 130 lm/w and corrosion free High

pressure die cast aluminum housing with

smooth finish powder coated and heat sink

extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with

toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT

3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED

driver efficiency > 85 %.( fittings required

LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage

capacity of LED fittings.The Engineer

incharge may select any wattage capacity

between the ranges shown.)(A) Street Light

(IP-65), Surge protection -4KV integral and

,Light must have 440VAC line supply with

over-voltage protection.(iii) 90 watts Cat III

(Make:Jaquar,Wipro,Crompton,Havells,Baja

87 Providing and erecting Approved make Four 7.00 Nos. 6173.12

pole moulded case circuit breaker having

breaking capacity ICU of 25 KA. at

V,having normal current rating up to 63 A to

100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with

all internal connections, spreader tinned

copper & complete erected in existing

G.M.S. housing.ICS=100% of ICU only Cat III

(Make:Schneider, Siemens, L & K,ABB,C&S)

88 Providing and erecting Approved make Four 1.00 Nos. 6790.43

pole moulded case circuit breaker having

breaking capacity ICU of 25 KA. at

V,having normal current rating 100A. with

Fixed thermal & magnetic release suitable to

work on A.C. supply 50 c/s. with all internal

connections, spreader tinned copper &

complete erected in existing 16 G.M.S.

housing.ICS=100% of ICU only Cat III

Note:-1 Add Rs. 10% extra for

housing/Encloser of MCCB(The Enclosures

should be used of same company of MCCBs

(Make:Schneider, Siemens, L & K,ABB,C&S)

13 of 21 DTP of ITI Work shop & Hostel 12-25

Sr. No. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

and reference to book of specifications)

89 Providing and erecting Approved make Four 1.00 Nos. 20946.39

pole moulded case circuit breaker having

breaking capacity ICU of 35 KA. and above

at 415 V . having normal current rating

250A. with variable thermal & magnetic

release suitable to work on A.C.supply

c/s. with all internal connections, spreader

tinned copper & complete erected in

existing 16 G.M.S. housing.ICS=100% of ICU

(Make:Schneider, Siemens, L & K,ABB,C&S)

90 Providing and erecting Approved make Four 1.00 Nos. 23041.02

pole moulded case circuit breaker having

breaking capacity ICU of 35 KA. and above

at 415 V . having normal current rating

250A. with variable thermal & magnetic

release suitable to work on A.C.supply

c/s. with all internal connections, spreader

tinned copper & complete erected in

existing 16 G.M.S. housing.ICS=100% of ICU

Note:-1 Add Rs. 10% extra for

housing/Encloser of MCCB(The Enclosures

should be used of same company of MCCBs

(Make:Schneider, Siemens, L & K,ABB,C&S)

91 Providing and erecting Approved make 2.00 Nos. 4687.41

Earth fault Relay suitable to mount with inter

connection suitable to following size of

moulded case circuit breaker having CT

ratio & MCCB rating as following along with

shunt trip 220V AC. with all internal

connections & complete erected in existing

M.S.housing.(1)100 A , CT Ratio 1/100

(Make:Schneider, Siemens, L & K,ABB,C&S)

(Make:Schneider, Siemens, L & K,ABB,C&S)

93 Supplying and erecting triple pole & neutral 1.00 Rn.Mtrs 1961.42

440V / 500V panel mounting Copper

Busbars with four equal Nos. of electrolyte

bus having current density not more than

1.6 Amp. / sq.mm (Rated current / cross

section area) duly wrapped with colour

insulating tape for phase sequence of

following current carrying capacity, erected

with necessary bus bar supports /insulators,

main cable socket to each bar, erected in

existing cubical panel with necessary

connections.(A) Suitable for 100 Amp.

94 (C) Suitable for 300 Amp. capacity 0.60 Rn.Mtrs 4909.60

14 of 21 DTP of ITI Work shop & Hostel 12-25

Sr. No. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

and reference to book of specifications)

95 Providing and erecting Miniature circuit 23.00 Nos. 270.68

breaker single pole 2A system and having

breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with

ISI Mark Cat III

(Make:Schneider, Siemens, L & K,ABB,C&S)

96 Providing and erecting Miniature circuit 48.00 Nos. 112.11

breaker single pole 10 A to 25A suitable to

operate on 240 V A.C. system and having

breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with

ISI Mark. Cat III

(Make:Schneider, Siemens, L & K,ABB,C&S)

97 Providing & erecting 240 V MCB double pole 16.00 Nos. 295.93

switch for lighting Load (B Curve) having

KA breaking capacity & confirms to IS :

in existing box having following capacity (B)

40 Amp. Cat III

(Make:Schneider, Siemens, L & K,ABB,C&S)

98 Providing & erecting 415V MCB Four Pole 2.00 Nos. 638.32

Switch for Lighting Load (B curve) having

10KA breaking capacity & confirms to IS

:8828 in existing box having following

capacity. (b) 40 Amp. Cat III

(Make:Schneider, Siemens, L & K,ABB,C&S)

99 Providing & erecting 415 V MCB Four Pole 7.00 Nos. 595.90

for Motor & Inductive Load (C Curve) having

10KA breaking capacity & confirms to IS

:8828 in existing box having following

capacity (a) 32 Amp. Cat III

(Make:Schneider, Siemens, L & K,ABB,C&S)

100 Providing and erecting Sheet Steel powder 1.00 Nos. 355.52

coated MCB distribution board - flush /

surface mounted fitted with busbar, neutral

link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to

house appropriate nos. of MCBs.(The DBs

should be used of same company of MCB to

be used) suitable for. (A) single phase

incoming and horizontal single phase

outgoing. (a) single door (IP-30) (i) 4 way

(Make:Schneider, Siemens, L & K,ABB,C&S)

101 (A) single phase incoming and horizontal 4.00 Nos. 1680.64

single phase outgoing (b) sheet steel double

door (IP-43) (v) 16 way

(Make:Schneider, Siemens, L & K,ABB,C&S)

15 of 21 DTP of ITI Work shop & Hostel 12-25

Sr. No. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

and reference to book of specifications)

102 providing and erecting Approved make 4.00 Nos. 2235.13

RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for

operation on single phase 240 V,50Hz.

having characteristic of quick action &

tripping with all advance feature & do not

incorporate any electronic component. for

following Max. rating erected as directed.

(ii) 40Amps. DP Cat III

(Make:Schneider, Siemens, L & K,ABB,C&S)

103 Providing and erecting Annealed bare 3.00 Kgs 794.87

Copper wire 8 to 12 SWG.

104 Supplying & erecting earth pit of minimum bore 2.00 Nos. 4591.46

dia.150mm size approved make Earthing

Electrode consisting Pipe-in-Pipe Technology as

per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 50mm

having 80-200 Micron galvanising, Inner pipe dia

of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant

ohmic value surrounded by highly conductive

compound with high charge dissipation suitable

for following type of applications with chamber

and heavy duty cover. (A)(approved make OEM

has to submit test certificate including value of

earth resistance of installation duly stamped and

signed by agency and officer Incharge has to

ensure the value of earthing resistane mentioned

in test Certificate) & having back filling

compound of (B) Inner chemical (CCM

Compound)- Resistivity:- 0.2 ohm / meter testing

as per IEC 62561-2017, Voltage drop:- < 1 volt at

no load & dry form, Sulphar content:- <2%(C)

Back fill Compound :- Earthing compound should

be capable to retain moisture for long time

Necessary test report must be submitted by

Agency. (a) For Electrical Installation up to 440V

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

(Make:Vasundhara, Saraa, National,Electro

16 of 21 DTP of ITI Work shop & Hostel 12-25

Sr. No. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

and reference to book of specifications)

105 Providing & erecting weather proof, dust & 3.08 Sq.mtrs 14902.55

vermin proof, floor mounted front operated

indoor type cubical panel board necessary IP-42

and above protection as per approval from

engineer incharge made from 14 SWG thick CRC

M.S. sheet for outer body & doors, 16 SWG thick

CRC M.S.sheet for internal partitions with

necessary accesories , supporting angles/ flats

channel including cutting, bending, drilling,

welding, riveting with internal partitions & cable

alley as per requirements & instruction of

engineer-in-charge with erection of supplied

switch gears, BUSBARS, suitable size of inter

connecting PVC copper wire / copper-aluminium

strips, rubber grommets, rib, bakelite control

fuses/MCB for measuring instruments, earth bus

& earth bolts, foundation flange - bolts-base

Plates, sufficient nos. of hinged doors, handles

with locking arrangement and rubber

gasket,heavy duty end terminal

connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel

shall be painted with epoxy powder coating.(The

rates excludes the cost of switchgears, bus bars,

inter connecting mains & Copper Aluminium

strips, meters, Fuses etc. The dimension shall be

measured excluding base beams) The panel shall

be supplied with following approved

manufacturers with following size.(B) The

standard companies switch gear shall be used

and only manufacturers at CPRI approved factory

(i) with 350 mm depth

106 Providing , erecting , fabricating the M.S. 80.00 Kgs 77.77

structure as per requirement on site

incorporating proper size of M.S.

angles,square,round, flats, bars, channels,

sections complete with cutting, welding,

grinding & finishing duly painted with one

coat of red oxide with erection on site as

per direction of engineer in charge with

necessary grouting, cementing, plastering &

finishing complete.

107 Providing and erecting XLPE (IS:7098)(I)-88 615.00 Mtrs 126.25

ISI armoured cable multistrand/solid

Aluminium conductor for 1.1 KV. to be laid

on wall with necessary clamps or in existing

trench / pipe of following size of cables.(B)

(Make:Polycab, RR

Kabel,Adcab,GreatWhite,Axelon)

108 Providing and erecting XLPE (IS:7098)(I)-88 10.00 Mtrs 153.52

ISI armoured cable multistrand Aluminium

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench /

pipe of following size of cables.(A) 4 core

(Make:Polycab, RR

Kabel,Adcab,GreatWhite,Axelon)

17 of 21 DTP of ITI Work shop & Hostel 12-25

Sr. No. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

and reference to book of specifications)

109 Providing and erecting XLPE(IS:7098)(I)-88 15.00 Mtrs 284.82

ISI armoured cable multistrand Aluminium

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench /

pipe of following size of cables.(C) 3 1/2

core 50 Sq. mm ( 25 Sq.1/2 mm core)

(Make:Polycab, RR

Kabel,Adcab,GreatWhite,Axelon)

(Make:Polycab, RR

Kabel,Adcab,GreatWhite,Axelon)

111 Providing and, fixing heavy duty flange type 46.00 Nos. 38.38

brass cable gland with rubber ring for PVC

insulated armoured cable complete with out

going tails, insulating tape etc for following

size of cables.(B) 2 to 4 core 6 Sq. mm

112 (D) 2 to 4 core 16 Sq. mm 2.00 Nos. 47.47

113 Providing and, fixing heavy duty flange type 5.00 Nos. 66.66

brass double compression type cable

gland with rubber ring for PVC insulated

armoured cable complete with out going

tails, insulating tape etc for following size of

cables.(A) 3 core 35/50 Sq. mm

115 Solder less crimping type Aluminium lugs 13.00 Nos. 15.15

conforming to IS suitable for cable of

following size evenly crimped with high

pressure tool & connected to switchgear

terminals with brass/cadmium plated nut

bolts in an approved manner. (C) 16/25

119 Providing & erecting Approved make Power 80.00 Nos. 1948.29

Saving 50 Watt Ceiling Fan with double ball

bearing ISI mark with Condenser 230 volt

A.C. 50 Hz 1200 mm sweep complete

having 3blades with aluminium blades with

canopy & 30 cm. down rod erected with

earthing.(Make shall be approved by

Engineer in charge)

(Make:Crompton, Havells, Bajaj,GM,Usha)

120 Supplying and erecting 19 / 20 mm. nominal 18.00 Mtrs 108.07

bore Medium Class M.S. Pipe down rod

erected duly painted for fan complete with

proper insulation without leckage and

121 Supplying & erecting single phase approved 8.00 Nos. 2054.34

make industrial exhaust fan suitable for

medium duty ring mounted low noise

operation suitable for medium duty having

following dia size and maximum speed in

RPM [A] 305 mm dia 900 RPM Cat.II

(Make:Crompton, Havells, Bajaj,GM,Usha)

18 of 21 DTP of ITI Work shop & Hostel 12-25

Sr. No. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

and reference to book of specifications)

122 Supplying & erecting approved make SMC 23.00 Nos. 476.72

press moulded composite FRP. loop-in, loop-

out approx. 2mm thick box complete with

Bakelite connector strip 5way(3P+N+E),DIN

rail for mounting mob & hinged doors as per

requirement having locking arrangements

with mounting clamp with nuts, bolts &

washers suitable for erection on pole with

cable clamps& earth bolt of following size of

box.(C)150mm x 125mm x 100mm [deep]

(Make:National,EPP,Sintex)

123 Supplying and erecting B class Galvanized 35.00 Mtrs. 215.13

iron pipe having smooth finished bore of the

pipe on both ends erected nuts and bolts

along the pole / wall shaping the pipe as per

site requirement. Pipe dia as following.(B)

124 Providing & erecting water cooler having 3.00 Nos. 55893.40

storage capacity 150 Ltr. & cooling capacity

150 Ltr.per hour @ an ambient temp of 45˚

C. The outlet temp. of the water should drop

by 15˚C within a hour, The water cooler

should be comprising of hermetically sealed

compressor, fan motor, condensing unit,

water tank surrounded by evaporating, coil,

thermostats, relay etc.complete with

necessary inlet & outlet connection. The

body of water cooler will be made from

Stainless Steel.

125 Supplying & erecting 5 stage single reverse 3.00 Nos. 29187.99

osmosis water purification system with M.S.

powder coated frame, prefilter housing with

'O' ring presediment filter GAC filter, carbon

filter suitable buster DC pump capacity

psi, mention with 40 psi inline type post

carbon filter auto low & high pressure

switches with following size of storage tank

& LPH capacity & erected as directed [C]

50 Ltr / Hr with 150 psi 2 nos booster pump

(Make:Voltas, Usha, Bluestar)

126 Supplying and erecting vertical mounting 4.00 Nos. 11364.52

type storage water heater with copper

container housed in M.S./S.S./ABS body

insulated with glass wool/puff complete with

heating elements,adjustable thermostats

300C to 850C, indicating lamp, safety valve,

fusible plug, etc.complete erected with

coach bolts, nuts. washers & cementation

(D)35 ltr.with 2 KW. heating element Cat.III

(Make:Usha,Bajaj,Havells,Racold)

127 Supplying and erecting approved make 3.00 Nos. 1275.63

panel mounting type Digital Voltmeter

having 3 digits LED display, 0 to 750 AC

Volts range erected on existing panel

board with all connection, wiring etc .with

manufacturers calibration certificate.

19 of 21 DTP of ITI Work shop & Hostel 12-25

Sr. No. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

and reference to book of specifications)

128 Supplying and erecting approved make 3.00 Nos. 1558.43

panel mounting type Digital Ammeter

having 3 digits LED display, external CT

operated, calibrated for 0 to 1000 Amps

suitable to operate on 500 Volt AC , erected

on existing panel board with all connection,

wiring etc .with manufacturers calibration

129 Supplying and erecting Ammeter / Voltmeter 6.00 Nos. 317.14

selector switch for 3 phase AC Supply 500 V

on existing panel board with necessary

130 Providing & erecting L.T. Current 9.00 Nos. 274.72

Transformer with bar primary 50/5 to 1000/5

ratio 15 VA burden erected in existing CRCA

box duly secured with insulating materials

connected to the meter

131 Supplying and erecting approved make 9.00 Nos. 43.43

suitable panel indicator LED type lamp, lens

cover, complete erected with necessary

132 Providing & Erecting new water level Sensor 3.00 Nos. 864.56

for 50 Ltr. R.O. System

Total of ELE ItemsRs.

Net Total Rs Civil + ELE Rs.

Note: CIVIL Fix Deduction of Credit of Dismental Materials Rs.1,43,800.00 will be deduct from 1st RA bill.

Note: ELE Fix Deduction of Credit of Dismental Materials Rs.21,632.80 will be deduct from 1st RA bill.

Amount of my tender work out as under

I / We am/are willing to carry out the work at ………………………………………….. % above / below Percent [should be

written in figures and words] of the estimated rates mantioned above. Amount of my/our tender works out as under

Estimated Amount Put to tender: Estimated Amount Put to tender:

Deduct % below Add % above

Net Rs. Net Rs.

In words : In words :

Signature of Contractor

Deputy Executive Engineer Executive Engineer

City (R & B) Sub Division Jamnagar (R & B) Division,

Jamnagar Jamnagar.

Deputy Executive Engineer Executive Engineer

Electrical (R&B) Sub-Division Electrical (R&B) Division

Jamnagar Rajkot

20 of 21 DTP of ITI Work shop & Hostel 12-25

Sr. No. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

and reference to book of specifications)

1) The work shall be carried out as per Public Works Department Hand Book, I.S. Specification

and other specification of the Division or as Directed.

2) All the columns in Schedule should be filled in INK and the total of the entries in the last column

should be strike out by the Contractor under his Signature.

3) Rates should include clearance of site (Prior to commencement of work and its close) in all

respect and good for work under all conditions of site moisture weather etc.

4) The Contractor shall exhibit the details of works, Tenders amount and specification as per

Govt. Circular No. TD 32772 N. Dt. 26-4-78 and as per G.R. No. TNC-9-24-C, Dt. 18-11-91, as

directed by Engineer-in-Charge of the works, on board at site of the work.

5) Contractor shall even "NIL" percentage, if no deduction is offered.

6) Testing of materials shall be as per statement attached with the specification. The material

shall be tested in GERI Bill for the testing shall be paid by the Executive Engineer and 1% of

amount put to tender after deducting the cost of materials to be supplied by Department as per

SCHEDULE 'A' at the sanctioned estimate rates from the Contractor in Running Bills. (As per

G.R.No. (R&B) TNC-1085/4/C Dt. 20-12-91 and modified ide (R&B) Deptt. Circular No.

7) For R.C.C. Item where there is change of grade mix or charge as per actual mix design the

difference of cement consumption shall be deducted from rate of original item at the rate of

star rate mentioned in the tender.

8) 1% L.C. shall be deducted from the bill as per agreement.

9) GST will be paid extra as per Govt. Emendment.

10) GST and Income tax will be deducted at source while making payment of bills

Signature of Contractor

Deputy Executive Engineer Executive Engineer

City (R & B) Sub Division Jamnagar (R & B) Division,

Jamnagar Jamnagar.

Deputy Executive Engineer Executive Engineer

Electrical (R&B) Sub-Division Electrical (R&B) Division

Jamnagar Rajkot

21 of 21 DTP of ITI Work shop & Hostel 12-25