PERIODICAL SERVICE INCLUDING CERTAIN B R WORKS IN MD ACCN AND REPAIR REPLACEMENT TO JOINERY, FLOORING, DADO, PLASTERING, ROOF, PLUMBING, SUNKEN FLOOR AND BATH SANITARY FITTINGS ETC AT MISA CAMP AREA UNDER GE S TEZPUR

Amount

Taking down shutter of any description n exc 1 Sqm each.Complete all as specified and as directed

Taking down shutter of any description exc 1 Sqm but n'exc 2 Sqm each.Complete all as specified and as directed

Taking down chowkhats incl shutters (without taking off shutters from the frame n exc 1.5 sqm.Complete all as specified and as directed

Taking down chowkhats incl shutters (without taking off shutters from the frame exc 1.5 sqm but n. exc 2 sqm.Complete all as specified and as directed

M & L for taking down cement plaster on brick walls incl racking out joints, hacking key & scrubbing down with water complete all as sfd and directed.

Taking down and refixing of Shutters of any description exc 1 sqm but n. exc 2 sqm each in same opening with necessary hinges , screws complete all as specified and directed.

Demolition cement concrete n'exc 15 cm thick (below or above ground level).Complete all as specified and as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing coat ), removing serviceable tiles to store and rubbish off the premesises.Complete all as specified and as directed

Dismantling water tanks and removing to store exc 500 but n exc 1000 ltrs capacity.Complete all as specified and as directed

Dismantling wrought iron or mild steel work of any description not otherwise provided.Complete all as specified and as directed

M & L for MS framed work of angle, tee, F.I, conforming to Fe-290 (Gde E-165), as in roof trusses including distance pieces, cleats etc. welding or riveted complete all as specified and directed.

Taking up or down 15mm bore steel water tubing & connections, including cleaning for refixing or removal to store complete all as sfd and directed.

Taking up or down 20 mm bore steel water tubing & connections, including cleaning for refixing or removal to store complete all as sfd and directed.

Taking up or down 25 mm bore steel water tubing & connections, including cleaning for refixing or removal to store complete all as sfd and directed.

Dismantling of AC/old CGI sheet corrugated / Semi corrugated sheets in wall cladding or in roof covering complete all as sfd and directed.

Dismantling wall and ceiling board or insulation boards/ slabs/ blankets, any thickness, including cover filletscomplete all as specified and directed

S&F anodised aluminium snap grid frame work of 605x605mm size for false ceiling all as specified and directed.

M & L 4mm thick non asbestos fibre cement building board fixed/inserted to Aluminium frame work, as in ceiling complete all as specified and as directed.

S & F 12 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed in aluminium frame work complete all as specified and directed.

M & L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with L type J type or cranked hook bolts as specified and directed

M & L Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/eaves board, fixed wiith L type J type or cranked hook bolts as specified and directed

S & F Pressed steel frames of size 105x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.Complete all as specified and as directed

S & F Pressed steel frames of size 125x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.Complete all as specified and as directed

M&L PCC 1:3:6 type C1 20mm grade aggregate as in filling of chowkhats hold fast or any other work or similar work complete all as specified and directed.

S & F 35 mm thick flush shutter , solid core construction ,with block board core and plywood face panel ,commercial type on both side complete all as specified and directed. (Note - Contractor to submit MTC from factory).Complete all as specified and as directed

S/F 35 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc. Divided into squares with plain chamfered or rounded, rebated sash bars, sizes of the members of the shutters as specified and directed. (Note - Contractor to submit MTC from factory).Complete all as specified and as directed

S & F 125 mm x 63 mm double rebate factory made 100 % solid wood polymer composite (WPC) lead free , termite proof , water proof , fire retardant door frame in desired colour complete all as specified and directed. (Note - minimum density 750 Kg /Cum). (Note - Contractor to submit MTC from factory)

S & F PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supply & fixing in opening as per specification & drawing,complete all as specified and directed. (Note - Contractor to submit MTC from factory)

S & F 30 mm thick moulded factory made 100 % solid wood polymer composite (WPC) lead free termite proof , water proof , fire retardentand door shutter in desired colour complete all as specified and as directed.(Note - minimum density 600 Kg /Cum ). (Note - Contractor to submit MTC from factory).Complete all as specified and as directed

S & F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S.tubes for top & bottom rails.M.S.frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S.frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined to gether with solvent cement, suppling & fixing in the frame at site as per specification & drawing.(Note - Contractor to submit MTC from factory).Complete all as specified and as directed

S&F stainless steel medium weight cold rolled butt hinges 100 mm long.Complete all as specified and as directed

S&F of aluminium anodised 200 mm long ,barrel tower bolts,of extruded section.Complete all as specified and as directed

S&F of aluminium anodised 150 mm long ,barrel tower bolts,of extruded section.Complete all as specified and as directed

S&F 150mm long aluminium handle, cast type, anodised.Complete all as specified and as directed

S & F in repair Stainless steel wire cloth 0.36 mm nominal dia of wire and avg width of aperature 1.40 mm and fixed with stainless steel wire staples all as specified and as directed

S & F Stainless steel wire cloth 0.63 mm nominal dia of wire and avg width of aperature 1.40 mm and fixed with stainless steel wire staples all as specified and as directed

M & L for Hacking out old broken glass (any hickness, size, quality or description) from Metal Frame including punching or drilling out old glazing pins/spring clips.Complete all as specified and as directed

S/F 4 mm thick ordinary quality sheet glass in squares n.exc 0.5 sqm in each pane glazing with oil putty.Complete all as specified and as directed

S/F 4 mm thick figured glass in squares n.exc 0.5 sqm in each pane glazing with oil putty Complete all as specified and as directed

S & F15mm dia GI water tubes medium grade with all necessary fitting all as reqd complete of and fixed in walls/floor etc.Complete all as specified and as directed

S&F 20 mm dia GI water tubes medium grade GI with all fittings fixed complete to walls and ceiling or laid in floors.Complete all as specified and as directed

S&F 25 mm dia GI water tubes medium grade GI with all fittings fixed complete to walls and ceiling or laid in floors.Complete all as specified and as directed

S&F 500 Ltrs capacity rotational moulded polythene water storage tank three layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified

S&F 1000 Ltrs capacity rotational moulded polythene water storage tank three layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified

S&F in repair 20 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms)

S&F in repair 25 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms)

S&F vitrified Ceramic tiles 10 mm thick area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 for laying of floor finish complete all as specified and directed

All as per item No 47 above but on skirting including 10mm thick backing coat in CM 1:4

M&L non-skid coloured ceremic tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles including 15mm thick screed bed in CM 1:6 for laying of floor finish complete all as specified and directed

S&F S&F Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match including 15mm thick screed bed in CM 1:6 for laying of floor finish complete all as specified and directed

All as per item No 50 above but on skirting including 10mm thick backing coat in CM 1:4.

S&F non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile 300mm x 300 mm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match including 15mm thick screed bed in CM 1:6 for laying of floor finish complete all as specified and directed

S&F for colour Glazed ceramic tiles 300 x 450 mm of 7 to 8mm thick, in dado/skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing coat in CM 1:4.Complete all as specified and as directed

M & L for machine cut kota stone on flooring/staircase 18-20 mm thick laid and jointed with grey cement slurry mixed and with pigment to match the shade of slab including rubbing/grinding and polishing including 15mm thick screed bed in CM 1:6 for laying of floor finish complete all as specified and directed

All as per item No 52 above but on skirting including 10mm thick backing coat in CM 1:4.Complete all as specified and as directed

M&L chequred cement concrete tiles 25cm X 25cm X 25mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry including 15 mm thick screed bed or bedding layer in CM (1:6) in floors complete all as specified and directed.

Taking down existing damaged IWC/EWC alongwith complete PCC and line concrete from sunken floor and providing new IWC and water proofing treatment to sunken floor as per following stage :- (i) 15mm thick plastering in CM (1:3) mixed with WPC at all around and base of sunken floor with proper slope.(ii) Applying a coat of 85/25 gde hot bitumen @ 0.7Kg/Sqm over a coat of bituminous primer @0.5Kg/Sqm and then pasteing of polythene film, 150 micron, matural colour with cold cut back adhessive.(iii) Fixing of 25mm dia GI pipe (med gde) spout of length 45 cm.(iv) Supply & fixing of vitreous china squatting pan, "ORISSA" pattern or padestal type, size 580x440mm white with integral footrest, P/S trap etc complete laid over PCC flooring 40 mm thick type B1 using 20 mm graded aggregate including providing PCC lean concrete bedding type C 3 in Mix 1:5:10 complete all as specified and directed

S&F in repairs Vitreous China wash hand basin white 550 x 400 mm including CP waste coupling and PVC Waste pipe fixed.complete all as specified and directed

S&F in repair Vitreous China EWC wash down water closet (padestal pattern, white ) including PVC Seat cover fixed complete all as sfd and directed.

S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including lime concrete bedding 1:2, complete all as sfd and directed.

S & F in repair PVC Low level flushing cistren 10 Ltr capacety including all fitting such as flush pipe brackets complete all as sfd and directed.

S &F in repair mild steel CP shower rose of size 100 mm swivel type fix to iron pipe all as directed.

S & F in repair 15mm Stop valves cast copper alloy with fancy type chromium plated with long shank and cup (Concealed Type) for iron pipe or for unions and fixed .complete all as specified and directed

S & F in repair 15mm Angle Stop valves cast copper alloy,fancy type with chromium plated for iron pipe or for unions and fixed .complete all as specified and directed

Dismentling and breakingup drain pipes AC /CI /PVC set in cement mortar 110mm/ 100mm/75mm bore.complete all as specified and directed

S&F PVC (SWR) pipes single socketed in any length with rubberring joints fixed to walls or floor 110mm bore.complete all as specified and directed

S&F in repair PVC (SWR) bends any radius 110mm bore.

S&F in repair PVC (SWR) bends any radius 110mm bore with access door.

S& F in repair PVC(SWR) junction single (single 'T') equal or unequal 110mm bore.

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm.

M & L 10 mm thick rendering in cm(1:6) on fair faces of brick work or concrete surfaces and finished the surface even & smooth without using extra cement.complete all as specified and directed

M & L 15 mm thick rendering in cm(1:4) on fair faces of brick work or concrete surfaces and finished the surface even & smooth with WPC @ 2% by the weight of cement. (WPC Will be measured and paid seperately).complete all as specified and directed

Supply only integral water proofing compound

M&L 5mm thick ceiling plaster in CM (1:3) finished even and smooth without using extra cement.complete all as specified and directed

M/L two coats of synthetic enameled paint over 1 coat of pink primer to new wooden surfaces of any description exc 10 cm width or girth complete all as sfd and directed

M/L one coat of synthetic enameled paint over old wooden surfaces of any description exc 10 cm width or girth complete all as sfd and directed

M/L two coats of synthetic enameled paint over red oxide primer to new steel surfaces of any description exc 10 cm width or girth complete all as sfd and directed

M/L one coat of synthetic enameled paint over old steel surfaces of any description exc 10 cm width or girth complete all as sfd and directed

M&L Applying two coats of acrylic emulsion distemper by smart painting method over a coat of 1 mm thick a layer of wall care putty and a coat of damp shield prime on walls including preparation of new surface complete all as sfd and directed

M&L for Complete removal of existing treatment and applying two coat of acrylic emulsion distemper by smart painting method over a coat of 1 mm thick wall care putty and a coat of damp shield primer. complete all as specified and directed.

M&L Applying one coat of acrylic emulsion distemper by smart painting method including preparation of old surface of wall complete all as sfd and directed

M&L applying two coats of of exterior antifungus paint over a coat of damp shield primer and a coat of 3mm thick wall care putty to including Complete removal of existing treatment of wall surface, complete all as specified and directed.

M&L applying one coat of of exterior antifungus paint over a coat of damp shield primer to old plastered surface of wall, complete all as specified and directed.

M & L applying one coat of white wash on old decorated or undecorated wall surfaces including preperation of surfaces, complete all as specified.

M&L for preparing new plastered surface of wall and applying two coats of white wash including cornice complete all as specified and directed.

M & L applying three coat of white wash on newly plastered or unplastered ceiling surfaces including preperation of surfaces, complete all as specified.

M&L for preparation of old plastered surface of ceiling and applying one coat of distemper all as specified and directed.

M & L for complete removal of existing treatment and applying two coats of cement based paint on old decorated or undecorated wall surface, complete all as specified and directed.

M/L 75mm thick P.C.C 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection/sub base/path etc complete all as specified and directed.

S&F in repair chromium plated (CP) fancy pillar cock 15mm dia complete all as sfd and directed.

S&F in repairs 15mm bore fancy type chromium plated bib cock long body with crutch or butterfly handle screwed down for iron pipes.complete all as specified and directed.

S&F in repair Tubular towel rail 20 mm dia with brass chromium plated complete all as specified and directed.

S & F of gratting doom 125/100 mm dia with waste hole of PTMT.complete all as specified and directed.

S & F in repair SS health faucet with 1.50 mtr tube and hook complete all as specified and directed.

S&F in repairs 20 mm dia decorative curtain rods of MS conduit with polymer linning etc. with decorative side dome and brackets complete all as specified and directed.

M & L for Door closer hydraulically regulated, designation No. 2, universal type, suitablefor door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed in repairs complete all as specified and directed.

S&F in repair PVC water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device

S & F in repairs 32 mm Waste coupling of brass chromium plated (half or full threaded) complete all as specified and directed.

S & F in repairs 32mm bore PVC Waste pipe for wash hand basin complete all as directed.

S&F in repair Glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long.complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S & F in repair tank cover for PVC tank(500/750/1000Ltrs) cover with 6 mm dia MS bar hinging device and 6mm dia MS bar locking arrangement of 'S; type for monkey protection etc complete all as specified and directed

S&F in repair 15mm bore Chromium Plated three in one Wall mixer for mixing hot and cold water including provision for over head shower screwed down for iron pipe complete all as directed by Engineer in Charge.

S&F in repair 15mm bore Chromium Plated Wash hand basin mixer for mixing hot and cold water screwed down for iron pipe.complete all as specified and directed.

S&F 300mm long aluminium sliding door bolt with with sand or die cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts complete all as specified and directed.

S & F powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S & F powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc.complete all as specified and directed.

S/F 5.50 mm thick ordinary quality sheet glass in squares exc 0.5 sqm in each pane fixed in aluminium frame.complete all as specified and directed.

S & F Powder coated aluminium grill of design DG-104 pattern made out of 10 mm dia rod fixed withand including stranded aluminium frame of F section of size 23.40 x 15.3 x 1.4 mm thick all as per manufacture instructions complete all asspecified and directed

M&L PCC 1:3:6 (nominal mix) Type C-2 using 40mm size stone aggregate finished fair & even without using extra cements as in base complete all as specified and directed. Note 1:-The contract sum shall be arrived at after deducting amount of schedule of credit from the total quoted amount. Note 2-Contractor's supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embossed with contractor's firm name while carrying out any activities in defence area for better check of security purpose. Note 3:-The tenderer (all eligible contractors) shall ascertain the taxes & levies as on date. The subject tender caters all the taxes & levies as on date including the latest notification of GST issued as on date ( issued by Central Board of Indirect Taxes and Customs)

D G Corporation

M/S Jiban Krishan Das and Co

sanjay upadhya