Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.6 LAccepted-AOC SAIDAKADAL SRINAGAR KASHMIR | SRINAGAR | JAMMU AND KASHMIR | 190001 | L1 | Accepted-AOC Tender accepted due to lowest and quoted reasonable rates. | |
| 2 | L2₹23.1 L+₹1.5 L (6.95%)Rejected-Finance | L2 | Rejected-Finance Higher side quoted amount | |
| 3 | L3₹23.8 L+₹2.1 L (9.94%)Rejected-Finance | L3 | Rejected-Finance Higher side quoted amount | |
| 4 | L4₹24.2 L+₹2.5 L (11.8%)Rejected-Finance | L4 | Rejected-Finance Higher side quoted amount | |
| 5 | L5₹24.4 L+₹2.7 L (12.7%)Rejected-Finance | L5 | Rejected-Finance Higher side quoted amount |
Tender Value
Refer Docs
EMD Value
₹42,000
Closing Date
31 Aug 2021, 6:00 pmClosed
CWE Khumbathang
CWE Khumbathang
REPAIR AND MAINT OF DG SET AND ALLIED WORKS AT DRASS, BHIMBAT AND THASGAM ETC UNDER GE KARGIL
2021_MES_463003_2
CWE/K-30/2021-22
Open Tender
Miscellaneous Works
Item Rate
180 days
Drass
As per tender and NIT doc
8 documents required · 8 mandatory
₹500
GE Kargil
₹42,000
7 Oct 2021
16 Aug 2021
2 Sept 2021
16 Aug 2021
31 Aug 2021
24 Aug 2021
Amount
General Servicing to Diesel Engine Generating Set any type and make including checking all rubber/hose pipes, checking of coupling joints, v belts speed governer, air filter, filter elements valve tappet adjustments, radiator lines, leakage of coolent, oil including oiling/greasing & repalcement of consumable parts such as minor items like nut/bolt, washers, gasket, welding works etc (included in unit rate) and replacement of worn out/unserviceable parts (to be measured seperately as supply only) suitable for 200 KVA capacity Silent DG set Make Cummins/Kirloskar NOTE : Cost facotor of labours for servicing & fixing of parts shall be deemed to be included in unit rate. However worn out & unserviceable parts to be replaced will be measured and paid saparately as supply only. Make of spare parts same as of DG Set or as per sample .Servicing will be done as per manufacturer instructions
Supply only Fuel filter FF 5052 as per sample
Supply only Fuel water seperator FS1275 as per sample
Supply only Lub Oil Filter LF 3959 (cartridge type).
Supply only set of hose pipe plain as per sample
Supply only air filter outer element
Supply only air filter inner element
Supply only Fan belt V ribbed as per sample
All as per srl item No 1.00 here-in-before but general services for 160/125 KVA Silent DG set complete (Make - Cummins/Kirloskar)
Supply only Fuel filter FF 5052 as per sample
Supply only Fuel water seperator FS1275 as per sample
Supply only Lub Oil Filter LF 3959 (cartridge type).
Supply only set of hose pipe plain as per sample
Supply only air filter outer element
Supply only air filter inner element
Supply only Fan belt V ribbed as per sample
All as per srl item No 1.00 here-in-before but for general services for 62.5/63 KVA Silent DG set complete (Make Cummins/Kirloskar)
Supply only Fuel filter K, 1.1 litre stores as per sample
Supply only Lub Oil filter as per sample
Supply only set of hose pipe plain as per sample
Supply only air filter outer element
Supply only air filter inner element
Supply only Fan belt V ribbed as per sample
Supply and fixing in replacement of following consumable spares for DG Set of cap 200 KVA. Make - Cummins/Kirloskar
Fuel filter FF 5052 as per sample
Fuel water seperator FS1275 as per sample
Lub Oil Filter LF 3959 (cartridge type).
All as per srl item No 4.00 here-in-before but for 160/125 KVA Silent DG set complete (Make - Cummins/Kirloskar)
Fuel filter FF 5052 as per sample
Fuel water seperator FS1275 as per sample
Lub Oil Filter LF 3959 (cartridge type).
All as per srl item No 4.00 here-in-before but for 62.5/63 KVA Silent DG set complete (Make Cummins/Kirloskar)-
Fuel filter K, 1.1 litre stores as per sample
Lub Oil filter as per sample
Repair/Servicing and calibration of injectors of DG Set 200 KVA BS VI engine, including repairing of rail manifold, fuel high pressure motor assembly etc all as required and testing after refixing on engine and setting the rated RPM all as directed by Engr-in-Charge. Make Cummins.
Repair/Servicing and calibration of fuel injecion pump of DG Set 200 KVA, including replacment of plunger, manifold washer, etc all as required and testing after refixing on engine and setting the rated RPM all as directed by Engr-in-Charge. Make Cummins.
All as per srl item No 8 here-in-before but for DG Set 160 KVA. Make: Kirlosker/Greaves/Cummins.
All as per srl item No 8 here-in-before but for DG Set 125 KVA. Make: Kirlosker/Greaves/Cummins.
All as per srl item No 8 here-in-before but for DG Set 62.5/63 KVA. Make: Kirlosker/Greaves/Cummins.
Servicing/overhauling of injecter nozzle assembly for DG Set 200 KVA including replacement of nozzles, washers, etc and pressure setting as required and replacement of timing shaft with coupling all as directed by Engr-in-Charge.
All as per srl item No 12 here-in-before but for DG Set 160 KVA.
All as per srl item No 12 here-in-before but for DG Set 125 KVA.
All as per srl item No 12 here-in-before but for DG Set 62.5 /63 KVA.
Taking out of self starter from mounting and to carryout complete servicing/overhauling of the same with replacement of carbon, armature coil, field coil, bush and pinion and other related components to the DG set 200 KVA Make: Stampford.
All as per srl item No 16 here-in-before but for DG Set 160 KVA. Make: Kirlosker/Greaves/Cummins.
All as per srl item No 16 here-in-before but for DG Set 125 KVA. Make: Kirlosker/Greaves/Cummins.
All as per srl item No 16 here-in-before but for DG Set 62.5/63 KVA. Make: Kirlosker/Greaves/Cummins.
Supply and replacement of High Pressure Pipe suitable for 200/160 KVA generator as per sample or as directed by Engr - in - Charge.
Supply and replacement of High Pressure Pipe suitable for 125/62.5 KVA generator as per sample or as directed by Engr - in - Charge.
Supply and replacement of Fuel supply Pipe suitable for 200/160 KVA generator as per sample or as directed by Engr - in - Charge.
Supply and replacement of Fuel supply Pipe suitable for 125/62.5 KVA generator as per sample or as directed by Engr - in - Charge.
Taking down Radiator assembly from the DG set cleaning with soap water and acid, cleaning the fins with Kerosene Oil and water complete and refixing including soldering if any leakage detected for the 200/160 KVA DG Set. Make: Cummins/Kirlosker/ Greaves and all as directed.
All as per srl item No 24 here-in-before but for 125/62.5 KVA generator as per sample or as directed by Engr - in - Charge.
Supply and replace fan blade assembly complete with fan blade, pully, bearing all as per sample for DG Set 200/160 KVA Silent DG set. Make: Cummins/Greaves/Kirlosker.
Supply and replace fan blade assembly complete with fan blade, pully, bearing all as per sample for DG Set 125/62.5 KVA Silent DG set. Make: Cummins/Greaves/Kirlosker.
Supply and replacement turbo charger complete with Gasket, stud, nut and hexagon flange all as per sample for DG Set 200/160 KVA all as directed by Engr- in Charge.
Supply and replacement turbo charger complete with Gasket, stud, nut and hexagon flange all as per sample for DG Set 125/62.5 KVA all as directed by Engr- in Charge.
Supply and fixing of lead acid power pack unit (battery bank) maintenance free 12 volts 180AH capacity Make Exide/Amron including taking down existing battery pack unit.
Supply and fixing of lead acid power pack unit (battery bank) maintenance free 12 volts 90 AH capacity Make Exide/Amron including taking down existing battery pack unit.
S&F Dynamo/alternator battery charger and installation on engine including testing/commissioning complete for engine having 12 Volt capacity including taking out existing.
S&F Dynamo/alternator battery charger and installation on engine including testing/commissioning complete for engine having 24 Volt capacity including taking out existing.
S&F water circulating pump for 200/160 KVA DG set complate as per sample
S&F water circulating pump for 125/62.5 KVA DG set complate as per sample
S&F brass battery terminal of suitable size for DG set of capacity 62.5 to 200 KVA
S&F fuel pipe tank to filter of suitable size for DG set of capacity 62.5 to 200 KVA
Supply and fix radiator assembly complete made of copper with all fittings for DG set 200/160 KVA Make Cumminns/Kirloskar model as per sample
Supply and fix radiator assembly complete made of copper with all fittings for DG set 125/62.5 KVA Make Cumminns/Kirloskar model as per sample
Complete overhauling of DG Set 200 KVA (6 cylinder, BS IV/VI) (Make-Cummins/Kirloskar) by dismantling complete engine and replacing all worn out parts like pistion head, piston set cylinder, piston ring set, Liner set, head gasket, CR bush set, head valve set, gen set, Began Piece set standard, Main standard, thrush washer Exhaust valve, Inlet valve etc complete all as specified and directed by Engr-In-charge. NOTE : Cost facotor of labours for complete overhauling & fixing of parts shall be deemed to be included in unit rate. However worn out & unserviceable parts to be replaced will be measured and paid saparately as supply only. Make of spare parts same as of DG Set or as per sample .
Piston Set complete
Piston Ring Set complete
Liner
Head gasket for all 6 cylinder
Bagan piece set Standard
Main began bearing Standard
Thrust washer
Main oil seal
Timing oil seal
Gasket for Gen Set
All as per srl item No 40.00 here-in-before but for complete overhauling for 160/125/62.5 KVA Silent DG set complete (Make Cummins/Kirloskar)
Piston Set
Piston Ring Set
Liner
Head gasket
Bagan bearing set Standard
Main began bearing Standard
Thrust washer
Main oil seal
Timing oil seal
Gasket for Gen Set
Opening of Head and Grinding/lapping of valve seat, exhaust valve, inlet valve, guide valve, spring and fixing the same complete for one cylinder of DG Set of Cap 200/160 KVA (Make- Cummins/Kirloskar) all as specified and directed by Engr-In-charge. NOTE : Cost facotor of labours for complete included in unit rate.
Opening of Head and Grinding/lapping of valve seat, exhaust valve, inlet valve, guide valve, spring and fixing the same complete for one cylinder of DG Set of Cap 125/62.5 KVA (Make- Cummins/Kirloskar) all as specified and directed by Engr-In-charge. NOTE : Cost facotor of labours for complete included in unit rate.
Supply and fixing in replacement of AVR for DG Set of cap 200/160 KVA as per sample.
Supply and fixing in replacement of AVR for DG Set of cap 125/62.5 KVA as per sample.
Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 23,536.00 and any other reduction if any from quoted amount.
M/S TAMCHOS GURMATH
M/S HAJI HASSAN ENGINEERING WORKS
ABASS ENTERPRISE
M/S Hussani Enterprises Kargil
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .