Supply conveyance, erection testing commissioning of 50 HP motor pump set at Karamoodu LI Scheme in Mazhuvannoor GP

Amount

Supply, conveyance , erection , Testing and Commissioning of 37 KW / 50 HP, 1450 RPM Squerrel cage Induction motor of make Kirlosker with all accessories coupled with End Suction pump (Model GK80/40 B ( 125 x 80 mm ) mounted on common base plate, flexible coupling with coupling pulley, bolts & nut, foundation bolts and nuts, coupling guard etc. from the orginal manufacturer ( Kirlosker or equivalent make ) etc capable of discharging clear water 48 LPS against a total head of 56 mtr (Excluding CC plinth)

Supply,conveyance installation testing and commissioning of Fully Automatic Star/ Delta Starter in sheet enclosure Type L&T make MN 65 FASD CAT No: SS94021 with single phase protection , over load protection etc. fixing on existing frame work and giving connections .

Brick work in cement mortar 1:6 with country burnt bricks 19cm x 9cm x 9cm for foundation and basement.

Plastering with cement mortar 1:4, 12mm thick one coat.

Plain cement concrete 1:4:8 using 40mm ( Normal size ) broken stone. ( m3 )

Cement concrete 1:3:6 using 20mm (nominal size) broken stone for reinforced concrete work.

Reinforcement for R.C.C works, bend tied and placed in position (plain grill requiring bend cold) using tor steel

Form work for reinforced cement concrete in slabs including wooden planks, joists, bamboo posts and labour for taking down after completion of work (Hire and labour charges only)

Supply and conveying 150 mm dia ISI marked Tata/ Jintal /equivelent make seemless MS pipe having sheet thickness 6.00 mm and cutting in to required length, facing the cutting edges , including conveyance charges to pumphouse and labour charges for loading, unloading,painting with two coats of synthetic enamel paint over a coat of red oxide primmer etc complete.

Supply ,conveying and errecting 150 mm dia standard quality MS flange rings having sheet thickness 12 mm and 75 mm depth providing required bolt holes etc including conveyance charges to pumphouse and labour charges for loading, unloading , painting with two coats of synthetic enamel paint over a coat of red oxide primmer etc complete.

Supply , conveying , erection of 150 mm dia 0.75mtr/required long MS pipe bend by using Tata/Jindal/equivalent make pipe having 5.40 mm sheet thickness , facing the cutting edges etc including conveyance charges to pumphouse and labour charges for loading, unloading , painting with two coats of synthetic enamel paint over a coat of red oxide primmer etc complete.

Supply, fabrication, and fixing 150 x 100 mm size or nearest size 0.3 Mtr long MS pipe reducer having 6.35 mm sheet thicknessfacing the cutting edges painting with two coats of synthetic enamel paint over a coat of red oxide primmer etc complete.

Supply and fitting 150 mm cast iron flanged type full way wheel valve/sluice valve with forged brass stem spindle including fittings charges etc.complete.

Supply and fitting 150mm cast iron flanged type Non Return Valve/Reflex Valve with gun metal seat and flap.

Fabrication, supply, convoyance, erection 25mm class B heavy duty GI pipe with suitable special such as cupler union bend etc

Supply and fixing 25 mm GM full way wheelvalvue/ball valvue including specials such as house collar, house claqmp etc.

Supply and fixing the following sizes of PVC Conduit conforming to IS 9537 / 1983 part III along with all required accessories on surface including making good the damages etc as required.20 mm dia light gauge

50 mm dia light gauge

Supplying and clamping the following sizes of corrugated PVC flexible conduit with necessary compression gland with locking ring and check nut at termination pointed using suitable size GI / painted MS saddles spacing not exceeding 60 cms on surface including making good the damages, colour washing etc. as required.50mm dia

Supply and drawing 650/1100 V grade PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.6.0 sq mm 3run

35 sq. mm. 3 run

50 sq. mm. 3run

Supply and installation of switch gear units in sheet steel enclosure complete with handle assembly, door interlock and pad locking arrangement of the following ratings on existing angle iron frame work or directly to wall using necessary bolts & nuts, fixing the unit to wall, making good the damages, colour washing etc. including giving necessary connections as required.125 A, 415 V, 50 Hz, AC 23 A duty, TP/ TPN switch disconnector unit including cost of 100 A HRC Fuse Link

Fabrication, supply, conveyance and fixing frame work made out of suitable size angle iron/ flat cut and welded to shape of suitable size painted with 2 coats of synthetic enamel paint over a coat of red oxide primer & with drilled holes to mount the switch gear, fixed to wall using suitable size anchor bolts or grouted to wall, making good the damages, colour washing etc as required

Fabrication, supply, conveyance and fixing cable entry/ wire way box made out 1.60 mm CRCA sheet of suitable size to match the switch gear and enabling the cables to be connected without strain, painted with 2 coats of synthetic enamel paint over a coat of red oxide primer & with drilled holes and mounting to the switch gear etc as required.

Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required.6.0 sq.mm

Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required.4.75 mm copper conductor (6 SWG)

3.15 mm copper conductor (10 SWG)

Supply and clamping the following sizes of strips on surface of as required 25 x 3 mm copper strip tinned at the points of contacts

supply of superior quality copper earth socket for the following sizes of earth conductor including crimping etc. as required.4.75 mm (6 SWG)

3.15 mm (10 SWG)

Supply and providing the following sizes of bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required25 x 6 mm brass nut , bolt and washer

Supply and providing following power capacitor suitable for motors 12.5 KVAr, 3 phase, 440 V, delta connected Metalised Poly Propylene Capacitor suitable for direct connection to motors.

Supplying and installation of supports, anchor bolts etc made out of suitable size single section channel etc as required including painting with 2 coats of synthetic enamel paint as supports to the suction/delivery side pipe etc.