Supply,Installation,Testing and Commissioning of LAN and EPABX at ATHANI

Amount

SITC of modular Enterprise L3 Switch with minimum 8 No’s of 10G BASE-T ports and 32 nos of SFP+ ports to support 1G, 10G optics and upgradable to 40G, minimum switching capacity of 500 Gbps or above. forwarding rate 700 Mpps or above. All ports on the switch should work on line rate. 2 GB of Flash and 2 GB RAM, support following features :-IEEE 802.1Qbb standard for Datacentre Bridging functionality, for FCoE transit switch with iSCI SAN, iSCI TLV,S two-stage configuration model, with Commit Stage and Configuration Rollback feature, L2 and L3 QoS with L2-L4 classification criteria and at least 8 hardware Queues per port. Scheduling methods like Strict priority and weighed round robin WRR. congestion avoidance methods like tail drop, Should also support Advanced IP Routing protocols like OSPFv2, OSPF v3, PIM, MSDP,IPv6, BGP, RIPng. Policy Based Routing which allows superior control by facilitating flow redirection regardless of the routing protocol configured,DHCP server, L3 redundancy: Virtual Router Redundancy Protocol (VRRP) and VRF functionality, MPLS functionality LSR, LER, RSVP, LDP, RSVP-TE and CCC, including configurations of inter vlan routing, load balancing etc. or any other configurations as instructed at the time of installation . preferred Make: Cisco/Juniper/HP .

Supply,Installation,Testing and Commissioning of enterprise L3 switch with 48 No’s of 1G BASE-T-T PoE+ ports and 2 nos of SFP+ Uplink port to support 1G and 10G optics, minimum switching capacity of 176 Gbps. forwarding rate of 130 Mpps or above , All ports on the switch should work on line rate. 2 GB of Flash and 2 GB RAM, support following features like L2 and L3 QoS with L2-L4 classification criteria and at least 8 hardware Queues per port, Scheduling methods like Strict priority and weighed round robin WRR, ongestion avoidance methods like tail drop, all ports should be PoE and PoE+ capable as per IEEE 802.3af PoE and IEEE 802.3at PoE+, PoE+ Budget 740 W,Switch should be including configurations of inter vlan routing, load balancing etc. or any other configurations as instructed at the time of installation . preferred Make: Cisco/Juniper/HP.

SITC of Enterprise L3 switch with 24 No’s 1 GBASE-TT PoE+ ports and 2 nos of SFP+ Uplink port to support 1G and 10G optics, minimum switching capacity of 128 Gbps. forwarding rate of 95 Mpps, All ports on the switch should work on line rate. 2 GB of Flash and 2 GB RAM, support following features like L2 and L3 QoS with L2-L4 classification criteria and at least 8 hardware Queues per port. Scheduling methods like Strict priority and weighed round robin WRR. congestion avoidance methods like tail drop, all ports should be PoE and PoE+ capable as per IEEE 802.3af PoE and IEEE 802.3at PoE+,S PoE+ Budget 370 W, including configurations of inter vlan routing, load balancing etc. or any other configurations as instructed at the time of installation . preferred Make: Cisco/Juniper/HP.

SITC of enterprise L3 switch with 12 No’s o f1GBASE-T PoE+ ports and 2 nos of SFP+ Uplink port to support 1G and 10G optics, minimum switching capacity of 64 Gbps. . forwarding rate of 47 Mpps, All ports on the switch should work on line rate. 2 GB of Flash and 2 GB RAM, switch should support following features like L2 and L3 QoS with L2-L4 classification criteria and at least 8 hardware Queues per port. , Scheduling methods like Strict priority and weighed round robin WRR. ,congestion avoidance methods like tail drop, all ports should be PoE and PoE+ capable as per IEEE 802.3af PoE and IEEE 802.3at PoE+,PoE+ Budget 124 W. including configurations of inter vlan routing, load balancing etc. or any other configurations as instructed at the time of installation . preferred Make: Cisco/Juniper/HP.

SITC of Optical Transceiver, eSFP, GE, single-mode SFP+(10G) Module up to 10 Km compatible with switches .

SITC of 24 PORT fully loaded LIU,RACK MOUNT, 1U, loaded with Splice Tray, Pigtail and Cable spool(Single- Mode)UPC type. Make: Opterna or Molex.

SITC of 4 PORT LIU,RACK MOUNT, 1U, loaded with Splice Tray, Pigtail and Cable spool(Single- Mode)UPC type.Make:Opterna or Molex.

Supply, laying, testing, certification and documentation of 1Mtr LSZH RoHs Compliant Fiber patch cord.(Single Mode) UPC type.Make:Opterna or Molex.

SITC of CAT-6, 24-port fully loaded patch panel.Make:Opterna or Legrand.

Supply and providing 1 meter Cat 6 Patch Cord Make: Amp or Molex.

Supply and providing 3 meter Cat 6 Patch Cord Make: Amp or Molex.

Supply and fixing Cat 6 outlet with spring shutter front access in recess/on surface as required and making good the damages, colour washing etc as required. Make: Amp/Legrand/Opterna

Supply and laying of 23 AWG 4 pair Cat 6 UTP cable through PVC Conduits/ Casing n capping as required. Make: Amp/Legrand/Molex.

Supply and fixing 20mm medium gauge ivory coloured PVC conduits/ Casing-n-Capping with specials confirming to the ISI standards on surface using suitable size fixtures spacing not exceeding 60 cm including making good the damage, colour washing etc. as required. Make: Precision/ Modi/ Finolex

Supply and fixing 25mm medium gauge ivory coloured PVC conduits/ Casing-n-Capping with specials confirming to the ISI standards on surface using suitable size fixtures spacing not exceeding 60 cm including making good the damage, colour washing etc. as required. Make: Precision/ Modi/ Finolex

Supply and fixing of 19’’ 9 U(550mm depth) rack with covered wire manager, cooling fan, AC distribution box and all other accessories. Preferred Make. Rittal/Netrack.

Supply and fixing of 19’’ 42U rack (800 mm x 1200 mm x 1000 mm) with Aluminium extruded Frame structure, covered wire manager, cooling fan, AC distribution box and all other accessories. Preferred Make Rittal/Netrack.

SITC of TEC approved Electronic Hybrid EPABX expandable up to 128 ports 1.64 Analog extension circuits 2. 8 Trunk circuits 4.LAN Module for system Maintenance .5.Supply and connecting line protection unit / IPM's for ten connections. Make: OBO Betterman, LSABMAG. 6.Operator console -Digital Phone as per the technical description.7. PFTP for Trunk lines 8. Two numbers of 6Volts 12 Ah sealed maintenance free Battery for power failure backup and 9. Mobile extensions .Preferred Model: Panasonic KX-NS 300.

Supply and connecting line protection unit / IPM's for ten connections.(Make: OBO Betterman, LSABMAG)

Supply and fixing of 19’’ floor standing 42 U rack (800 mm x 1200 mm x 1000 mm) with covered wire manager, cooling fan, AC distribution box, Castor wheel with two breaks and all other accessories for fixing the Hybrid EPABX and used as cable management enclosure with 2 nos of Krone mounting frame ( 19” rack mounting frames for termination of up to 150 pairs (15 modules)) in a 3U frame complete with jumper rings etc including total Krone modules for 200 pairs . Preferred Make. Rittal.

Supply and laying of 2 pair PVC Telephone Cable of conductor size 0.51mm ATC Copper in the existing cable trays / PVC conduits / Oval Conduits / casing-n-capping etc. as required. Make: Finolex/ Delton.

Supply and fixing of RJ 11 telephone socket of approved model in recess and making good the damages, colour washing etc as required. Make: Legrand or MK.

Supply and fixing of dual RJ 11 telephone and RJ 45 LAN socket of approved model in recess and making good the damages, colour washing etc as required. Make: Legrand or MK.

Supply and fixing of door type junction box with lock in recess and fitted with KRONE make modules for 20 pairs.

Supply installation and commissioning of Caller ID Phones (DTMF) with glass epoxy coated printed board Make/Model : ITI Delta/Panasonic KXTS-500MX

Supply installation and commissioning Analog phones (DTMF) with glass epoxy coated printed board. Make/Model: Panasonic/Alcatel/ITI .

common for EPABX and LAN through trench

Excavation of trench of size 40 X 100cm, sand cushioning up to a height of 25cm (80+170mm) with river sand, providing protective covering with country burned bricks laid breadth wise refilling the trench, etc as required for laying Armoured fiber cables.

Supply and Laying of 32mm/40mm emulsion impregnated HDPE Pipe for underground laying for mechanical protection to OFC cable conforming to IS14930partII

Supply & Drawing armoured PVC insulated and & PVC sheathed copper conductor 20pair jelly filled Telephone Cable conforming to ITD specification through the existing conduit Make: Finolex.

Supply, laying, testing, certification and documentation of Single mode armoured 4 core fiber LSZH,RoHs Compliant for outdoor use. Make: Opterna or Finolex.

Swift Systems