GENERAL-KLA-11th Session-Assembly Building- Cleaning and other repair works in Assembly Building (4,5,6,7 levels ) in connection with the 11th session of XV KLA and engaging other petty repairs

Amount

Detailed estimate

OD29982/2024-2025:Cleaning glass panes of of aluminium partition,doors,windows etc with suitable cleaning material including cost, conveyance of all materials and labour charges etc

OD29983/2024-2025:Polishing brass letters of 50 mm to 70 mm size using brass polish including all cost of labour and materials

OD29984/2024-2025:Polishing the letters of 40 mm or nearest size using brass polish including all cost of labour and materials etc complete

OD29985/2024-2025:Polishing the 40 mm vide brass plate fixed in the Speaker's dias and stair case using brass polish including cost conveyance labour etc

OD29986/2024-2025:Polishing and oiling for smooth movement of the brass fittings (door handles) aldrops, tower bolts etc of size 200 mm or nearest using good quality brass polish including cost, labour etc

OD29987/2024-2025:Polishing and oiling for smooth movement of the brass fittings door handles, aldrops, tower bolts etc of size 300 mm or nearest using good quality brass polish including cost, labour etc

OD29988/2024-2025:Polishing the heavy type brass 'Nilavilakku'' of size 2.05m height using good quality brass polish including all cost of labour, materials etc complete.

OD29989/2024-2025:Cleaning and polishing the brass chains and connected posts of size 500mm or nearest around the statue of Sri. K.R. Narayanan using brass polish including all cost of materials, labour etc complete.

OD29990/2024-2025:Repairing and rearranging the vertical blinds in the ministers room including replacing bottom chains, handle, rope and other fittings etc as per the direction of Engineer in charge.

OD29991/2024-2025:Engaging carpenter for petty repairs

OD29992/2024-2025:Engaging plumber for repair works as per the direction of site engineer in charge

OD29993/2024-2025:Cleaning the drains with in the campus and dumping the waste and debris with 50 m lead as per the direction of site engineer in charge.

OD29994/2024-2025:Engaging aluminium fabricator for petty repairs

OD29995/2024-2025:Polishing the small brass fittings using brass polish and other sundries above assembly hall table

14.53.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work

14.70:Melamine polishing on wood work ( one or more coat)

50.17.1.4:Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.

18.53.1:Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore

9.83:Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

18.9.3:Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work25 mm nominal outer dia pipes

18.9.5:Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work40 mm nominal outer dia pipes

OD29999/2024-2025:Engaging coolie for cleaning and materials shifting etc.

OD30000/2024-2025:Applying acid washing on floor, wall tiles including material, labour charges etc. complete.

OD37551/2024-2025:Hire charges for providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10 Kgf/cm2- External work - Exposed on wall

OD37552/2024-2025:Hire charges for providing and fixing PVC pipes for 7 days, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 6 Kgf/cm2 - External work for 7 days

OD37563/2024-2025:Pumping or Bailing out water and removing slush etc by using pump setabove 10 HP and upto 20 HP, including conveyance to site and erection, cost of fuel, lubrication oil and other stores, labour etc complete

OD37565/2024-2025:Removing the silty mud , decayed and dried leaves and other accumulated wastes and then cleaning with fresh water and allowed to dry after rubbing with cotton waste and again cleaning the inside with good cleaning agent and dewatering the waste water inside etc complete

OD37607/2024-2025:Hire charges for providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 m dia 4 Kgf/cm2 - External work - Exposed on wall

15.57:Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 metres lead as directed by Engineer - in-Charge

12.45.3:Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum moisture resistant board

50.9.11.2:Providing and fixing Thomson Multi wood board or equivalent make paneling 18 mm thick, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately)as per the direction of site Engineer-in-charge.

13.26:Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

K Gopakumar

JINESH S

Bidder Name

K Gopakumar

A. NISAMUDEEN

JINESH S