Tender for Renovation of TD Lab at NIFT- Gandhinagar

Civil Work: Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.

Providing, laying controlled cement concrete M 250 and curing complete including the cost of form work but excluding reinforcement for reinforced concrete work in: Up to Plinth Level.(D) Column

Brick work using common burnt clay building bricks having crushing strength not less than 35kg. /Sq.Cm. in foundation and plinth in Cement Mortar 1:5 .(1-Cement: 5 -fine sand)(B) Conventional

Providing 15 mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for interior plastering upto floor two level and finished even and smooth in (ii)Cement mortar 1:4(1-cement:4-sand)

20 mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting of 12 mm thick backing coat of C.M.1:3 (1-cement:3-sand) and 8mm thick finishing coat of C.M.1:1(1-cement:1-sand) etc. complete.

P&L 24"x24" vitrified 8mm thick tile flooring over 20mm (average) base of cement mortar 1:6 (1 cement:6coarse sand)on new surface or fixing one xisting flooring by adhesive material including dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing & cleaning the surface etc.complete for light shade

Providing and laying Vitrified tiles 8 to10 mm thick, 24''x24'' in skrting risers of steps and dedo on 10mm thick cement plaster 1:3 (1-cement:3-coarse sand)and jointed with white cement slurry

Structural steel work (ConfirmingtoIS4923-1997)riveted, bolted or welded inbuilt up for all type sections, in framed work ,including cutting, hoisting, fixing inposition and applying apriming coat of approved steel primer all complete as per the structural designs and directions of Engineer incharge.Column(122x61x3.6mm )

Providing corrugated G.I.sheet of class-3 roofing fixed with glavani shed iron J or L Hooks,Bolts and nuts 8mm diameter with bitumen and G.I. limpet washer or G.I.limpet washer.filled with white lead complete excluding the cost of purlins, Rafters and Trusses.(1) 0.80mm thick sheet.

Applying two coats of putty & two coats of primer of approved brand and manufacture on new wall surface to givean even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth.

Finishing wall with weather proof exterior emulsion paint on wall surface (twocoats)to givean required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete

Providing and playwood lining with but jointed and nails(frame work and cover fillets to be measured and paid for separately) (ii) 9mm thick ply.

Providing and fixing flush door both sides laminated and I.T.W. beading all around by using I.T.W. frame 120 m.m. x 80m.m.. shutter fabricated from 35 mm thick solid core malemine faced three layered pre laminated flat pressed wood based exterior grade bonded BWP/BWR synthetic resin having stamped IS 12823 grade I type II including three coats of lacquer polishing to exposed wooden surfaces and Stainless steel decorative type designs fixtures / fastening etc.including I.T.W. triangular batten patti of size 30m.m.x30m.m.etc. as per architectural detailed drawing and as directed by engineer in charge.

Providing and fixing window having extruded aluminium colour anodized section frame main outer size 127mm x 38.10mm x 1.35mm @ wt. 1.384 kg/m, horizontal four track member size 122.20mm x 31.75mm x 1.10 mm @ 1.205 kg/m, vertical member of size 122.20mm x 31.75mm x 1.50 mm @ 1.398 kg/mt with Sliding shutters of horizontal member size 40mm x 18mm x 1.29mm @0.456 kg/mt vertical member of size 40mm x 18mm x1.29mm @ 0.456kg/mt with 5 mm transprent bronze colour tinted float glass with powder coated aluminium fitting and fixture and transperent silicon sealent glass fixing to frame as per details etc complete for window

Electrical Work: Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length , in below type of pipe erected with 6A Modular type switch / bell push & accessories and earth continuity of following type, erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed. (a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete (Cat. III)

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories. I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board (a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete

Supply,fixing, connection and testing of 3 Nos.-5/6 & 15/16 A power plug socket along with 1 No.16A & 1 Nos 6A switch with top cover plate, PVC back box with all accessories to complete the job.

Point wiring for secondary light point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires, in below type of pipe to be erected complete with earth continuity and necessary connection with primary light with accessories erected on Metal / PVC / wooden box covered covered with appropriate front plate modules erected on / in wall / ceiling for open / concealed wiring. with necessary Lamp holder / ceiling rose / H.D.Connector as directed.as per pipe erected with following type of accessories. Note:- Maximum up to 6 mtrs length, excess will be considered as Mains for Secondary Point. (a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size. With medium class Rigid PVC pipe and accessories (a) 3 wire 1.5 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size. With medium class Rigid PVC pipe and accessories (a) 3 wire 2.5 sq. mm

Providing and erecting Sheet Steel powder coated MCB 8 way distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for sheet steel double door.

Supply and installing Ceiling fan 36 inch size

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected with 6A Modular type switch and hum free EME step type electronic fan regulator mounted and accessories with earth continuity of following type erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as directed. (a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete

PRATHAM CONSTRUCTION CO