GENERAL-Manappad-Fabrication Painting and erection of Stainless Steel shutter at Manappad in Engandiyoor Grama panchayath.- General Mechanical Work

Amount

Demolishing and concreting

15.3:Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

4.1.4:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 )1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)

4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns

5.23:Smooth finishing of the exposed surface of RCC work with 6mm thick cement mortar 1:3 ( cement : 3 fine sand).

Supply fabrication and erection of embedded parts

OD4450/2024-2025:Supply of MS round bar including cost of conveyance charges

OD4451/2024-2025:Fabrication and erection of embedded parts for canal shutters ( up to 2 tonne weight ) and accessories as per approved specifications, drawings and directions deptl. officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

OD4452/2024-2025:Fabrication, Supply, erection and assembling in correct position and alignment by welding SS Embedded parts in 304L Grade like roller track, seal track,Seal seat etc as per approved specifications, drawings and directions of deptl officer at site including cost of all materials,labour,machinery for planing, welding,shearing, grinding etc,lead and lift, conveyance, incidental and handling etc complete.

OD31133/2024-2025:Providing trapezoidal ring bund of size 3.5 / 2 x3.5 m high and to a length of 5 m using sand bags with 0.50m thick clay on upstream side of canal including the cost of all labour etc. complete as directed by the departmental officers

50.2.3.1:Pumping or Bailing out water and removing slush etc by using pump set including cost of labour, oil hire charges of pumpset, etc complete

supply fabrication and erection of shutter

OD4449/2024-2025:supply and fabrication in correct position and alignment SS 304L grade plate for CANAL GATE

85.118:Supplying and fixing in correct position with specified initial interface L-type / bulb nose rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings

85.116:Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing

OD5026/2024-2025:Erection of the Canal Shutter ( Up to 2 Tonne weight ) / Hoisting Bridge / Platform including hand rails , ladder etc. for the same including . alignment correcting and setting complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied

Supply fabrication and erection of hoisting bridge

OD4441/2024-2025:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charge

OD4489/2024-2025:Providing of Double worm and pinion having cast steel worm wheel 250mm dia 50mm thick with and hub on both sides 150mm dia 75mm thick suiting 75mm screw rod and a lifting speed of around 5.00 cm/min for hand operation /manual operation including cost of all materials, labour, hire charges and conveyance.

OD4488/2024-2025:Fabrication and supply of Structural steel Hoisting bridge ( Up to 2 tonne weight ) Platform and accessories etc. for the same as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

OD4442/2024-2025:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B

85.104:Supply of Al checquered plates including cost of conveyance charges

OD31126/2024-2025:Supply of SS bolt and nut.

OD4444/2024-2025:Supply of 32 mm G I pipe including cost of conveyance

OD4445/2024-2025:Providing EN-8 screw rod dia 63 mm with single start square thread with head pitch of 12.7mm root dia 62.3 mm of hand operation including cost of all materials, labour, hire charges and conveyance.

85.115:Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

OD4448/2024-2025:Erection of the Canal Shutter ( Up to 2 Tonne weight ) / Hoisting Bridge / Platform including hand rails , ladder etc. for the same including . alignment correcting and setting complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied

Kinanath V P (BID ID -2099127)

Bidder Name

Kinanath V P

MANAF V