Annual Plan-2025-26 Installation of Pump set and Motor for Nadayankode Drinking Water Project - Thiruvilwamala G.P-Project no S0 195/26-General Electrical Work

Amount

ELECTRICAL

OD118029/2025-2026:Supply of 3 phase 5 HP/3.73 KW. bore well submersible pump set capable to discharge 140-40 LPM of clear water to a head 82M-201 M. suitable to work with 415V,50HZ,A.C supply including of all taxes.Makes prefared :-Deccan -Er43K Or equ / Texmo / Kirloskar brands

OD118027/2025-2026:Submersible pump controllers with ammeter,volt meter,SPP,for single phase 5 H.P submersible motor pumps (MU-G6 DOL )

90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

90.14.24.4:Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.4 KVAr, 3 phase, 440 V, delta connected standard duty Metalised Poly Propylene Cylinderical Capacitor suitable for direct connection to motors.

OD118017/2025-2026:Supply and providing 4 pole enclosure for independent mounding of MCB/RCCB/Isolator etc.

OD118020/2025-2026:S&F 40 A,4 pole RCCB 100/300 mA

OD118026/2025-2026:Supply and installation of switch gear units in sheet steel enclosure complete with handle assembly, door interlock and pad locking arrangement, of the following ratings on existing angle iron frame work or directly to wall using necessary bolts & nuts, fixing the unit to wall, making good the damages, color washing etc. including giving necessary connections, Fuse links as required. Switch disconnector unit 32A TPN AC23 A

90.6.10.2:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required25 mm

90.6.6.3:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.4 sq mm

1.17.22:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 4 sq. mm

1.17.31:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 6 sq. mm

OD118011/2025-2026:Supply and providing adaptor suitable for 38/40 mm inner dia CPVC pipe

OD118019/2025-2026:supply and providing 40 mm threaded CPVC RED column pipe for delivery line

OD118031/2025-2026:Supply and providing 40 mm GI union

OD118030/2025-2026: Supplying , threading , laying and jointing of the following sizes of B' class GI pipe with all required accessories in ground in position 40 mm dia

OD118009/2025-2026:Supply and providing 40 mm dia G.M Non Return Valve

OD118022/2025-2026:Supply and providing 40 mm dia GI bend

OD118013/2025-2026:Supply and Providing 40 mm dia GI coupling

OD118021/2025-2026:Supply and providing M.S. borewell clamb with bolt and nut.

OD118010/2025-2026:Supply and providing PVC Bore Well End Cap (160 mm) 6 inch Heavy

OD118015/2025-2026:Supply and providing good quality garware make nylon marine rope 16 mm size with required PVC tie-bad ad tieing the pump set with required outside the well

OD118014/2025-2026: Charges for installation of above 5 H.P, 3 phase , submersible pumpset into well after connecting the delivery pipes, and lead cables to motor and hanging the unit on poly propelyne rope to 75 Meters depth in trouble free operation and conducting trail run satis factorly .

90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)

90.14.2.2:Supply and providing 3mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.

90.14.3.3:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardSupply and providing 'U' section PVC beeding in the panel board

5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

5.15:Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

OD118024/2025-2026:Providing and fixing test joint on watering pipe, made of 2 no. strips as mentioned below of the following sizes provided on either side of the conductors with 4 nos of GI bolts, nuts check nuts and spring washers etc. complete as required.2Nos 25x6 mm G.I. strip 200 mm long

90.16.2.1:Supply and laying of the following sizes of B class GI pipe laid 0.6 m below ground level including excavating trench of suitable size and refilling etc, as required.15.mm dia. G.I pipe ( medium class)

90.16.1.2:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG)

90.16.1.4:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.00 mm copper conductor ( 8 SWG)

90.16.5.2:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.65 mm (12 SWG)

90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)

OD118012/2025-2026:Supply and providing the following sizes of bolt and nut with washers on the existing MS box/earth bus etc. as required including necessary holes as required. 25x3mm brass nut and bolt

OD118008/2025-2026:Supply and providing the following sizes of bolt and nut with washers on the existing MS box/earth bus etc. as required including necessary holes as required. 25x6mm brass nut and bolt

OD118028/2025-2026: Supply and fixing 32A, 415 V, 2 way neutral link mounted on DMC/ SMC base in the existing meter board and giving connections etc..

OD118016/2025-2026:Supply and providing 32 A HRC fuse unit with HRC fuse link i the meter box and giving connections as required

OD118018/2025-2026:S&F SMC Meter Box 3750 (350x481x210mm)

90.3.18.1:Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.25 mm dia with HG company fabricated clamps

OD118023/2025-2026:supply and providing M8 anchor bolt hook in wall / parapet for biding support for service main wire

OD118025/2025-2026:Preparing completion and test certificates for KSEB connection

M M ABDUL RASHEED (BID ID -2382527)

SHARJAS A (BID ID -2383027)

Bidder Name

UNNI K

SHARJAS A

M M ABDUL RASHEED