Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.4 LAccepted-Finance | ₹2.4 L | L1 | Accepted-Finance As per Dean Sancton |
| 2 | L2₹2.4 LRejected-Finance | ₹2.4 L | L2 | Rejected-Finance As per Dean Sanction |
| 3 | L3₹2.4 LRejected-Finance | ₹2.4 L | L3 | Rejected-Finance As per Dean Sanction |
Tender Value
Refer Docs
EMD Value
₹2,500
Closing Date
30 Apr 2026, 1:00 pmClosed
Dean Nair Hopital Dental College
Mumbai Central, Mumbai - 400 008
Prov. Detailing, Fabri. and fixing of requir. openings for refuge area at NHDC
2026_MCGM_1297324_1
DC/742/Engg
Open Tender
Miscellaneous Services
30 days
Nair Hospital Dental College
Please refer Tender documents.
3 documents required · 3 mandatory
₹472
₹2,500
5 Jun 2026
24 Apr 2026
4 May 2026
24 Apr 2026
30 Apr 2026
24 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Providing, Detailing, Fabrication and Fixing of required openings for refuge area of Nair Hsopital Dental College | |||||
| 1.01 | Providing, detailing, fabricating and fixing at desired location using hot rolled sections and MS Plates of grade Fe 250 as per specifications and approved fabrication drawings (which are to be prepared by Contractor and got approved from Engineer), transporting to site and erecting structural steel members for all heights & at all levels including provision of necessary erection bolts, fixing bolts, nuts, washers, cleats, stiffeners, gussets, base plate, and all necessary fixtures and operations like preheating as per specifications, straightening, bending, cutting, drilling, grinding, machining if specified, welding, grinding and removing the welding burr and preparing surface for painting with wire brush cleaning and applying two coats of epoxy red oxide zinc phosphate primer of 30 microns each and two coats of Epoxy Corrosion Resistant Enamel paint of 30 microns after fabrication including touching up with spray painting after erection etc complete as directed by Engineer In Charge. (The qty. for this item shall be measured for gusset plates, base plates, bolts in M.T.) | - | MTR | - | - |
| 1.02 | Providing and fixing G.I. crimped wire mesh of required openings of size 25 mm x25 mm or of any size with main and cross wires of 10 gauge approved type as per manufacture’s specifications with necessary fittings including painting with one coat of one coat of red oxide zinc chromate primer and two coats of approved synthetic enamel paint etc. complete as directed by Engineer In Charge. (Iron works will be paid separately. The clear visible area of the wire mesh exclusive overlap will be paid for). | - | Sq. mtr | - | - |
| 1.03 | Providing and applying first single coat of approved primer and two coats of synthetic enamel paint/flat oil paint of an approved make and colour as per manufacturers specifications to
Surfaces specified below, at all height and locations as directed including scaffolding, cleaning and preparing surfaces for painting by any approved means etc. Complete as directed by Engineer-in-charge. For steelwork | - | Sq. mtr | - | - |
| 1.04 | Anodized Aluminium door stopper | - | Nos | - | - |
| 1.05 | P/F standard brass aldrop of 12mm dia., 200mm long. | - | Nos | - | - |
| 1.06 | Standard Brass Handles
200 mm long. | - | Nos | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.10 MB
Tendernotice_2.pdf
PDF • 0.86 MB
BOQ_2228932.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid