VANIMEL GRAMA PANCHAYATH-RETENDER Vanimel GP. Renovation of Koottayichal water supply scheme. Project No 64/24- Vanimel GP Renovation of Koottayichal water supply scheme -General Electrical WorkDrinking water project

Amount

Koottayichal kudivella padathi

90.2.1.1:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single Control light point with 6A, plate ceiling rose - Short point

90.2.1.6:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Combined plug point with 6 A, 5 pin plug socket controlled by 6 A, switch in the same switch board as that of light points

90.6.6.3:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.4 sq mm

90.6.10.3:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required32 mm

90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)

90.14.2.1:Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.

90.14.3.1:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardA' section neoprene beeding suitable for 1.60/ 2.00 mm sheet

90.14.6:Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required.

90.14.7:Supply and providing copper earth bus in the panel board

90.16.1.2:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG)

90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)

90.16.1.4:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.00 mm copper conductor ( 8 SWG)

90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)

90.16.5.4:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.4.00 mm (8 SWG)

1.17.2:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 1.5 sq. mm

1.17.31:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 6 sq. mm

1.58:Supplying and fixing PVC batten/ angle holder including connection etc. as required.

2.1.1:Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.32 Amp TP & N

2.15.1:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps

5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

5.9:Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

OD358973/2023-2024:Supply and fixing 50mm ASTM socket 80 Sch

OD358974/2023-2024:Supply and fixing 65mm (2 1/2") GI Flange in the existing suction/delivery pipe using required leak proofing materials etc. as required.

OD358975/2023-2024:Supply, laying and fitting 50 mm 80 Sch ASTM pipe with suitable type solvent etc. as required at site,

OD358977/2023-2024:Supply and fixing 50mm 80 Sch ASTM Tee

OD358978/2023-2024:Supply and fixing 50mm 80 Sch ASTM Union Code

OD358979/2023-2024:Supply and fixing 50mm 80 Sch ASTM Threaded Adaptor Male

OD358980/2023-2024:Supply, installation, testing and commissioning of 2 1/2" Cast Iron Non Return Valve in the existing PVC/ ASTM pipe

OD358981/2023-2024:40 A bakelite fuse holder with fuse link and necessary bolt and nut

OD358983/2023-2024:Supply and providing suitable iron hook grouted on wall for binding the service wire.

OD358985/2023-2024:Supply and providing32 A 2 way neutral link on existing meter board using suitable nut.bolt etc as required.

OD358986/2023-2024:Supply and providing 200 mm plastic shade on the existing holder as required.

OD358987/2023-2024:Supply and providing the following types and power rated lamps in the existing fittings as required 9 w, LED bulb

OD358988/2023-2024:Supply and fixing clamp made with 50x6 mm MS Flat for hanging delivery pipe of submersible motor pump set in existing GI pipe above the open well

OD358989/2023-2024:Supply and fixing 50mm B class GI pipe as support for hanging submersible motor pump set in open well

OD358990/2023-2024:Supply and fixing 50mm 80sch ASTM bend

OD358991/2023-2024:Supply and fixing 50 mm ( 2'') GI flange in the existing suction/delivery pipe line using required leak proofing materials etc as required

OD358992/2023-2024:Supply and fixing 75x63 mm PVC reducer

OD358993/2023-2024:Supply and fixing 75 mm PVC threaded adaptor male

OD358994/2023-2024:Supply and fixing 50 mm GM Ball valve in the existing ASTM pipe Zoloto make or equivalent

OD358995/2023-2024:Supply and providing 6 mm stranded steel rope for hanging submersible motor pump set

OD358997/2023-2024:Supply and installation of dust and vermin proof, 3 phase Syntax meter Board (GS-MB-6535) and to fix KSEB meters, fuse units,CT etc as required including fixing it on wall , making good the damageds colour washing et as required.

OD358998/2023-2024:Supply and providing 2x25x3 mm GI strip as test joint on the existing watering pipe of earthing includeing bending and giving connections

OD359000/2023-2024:Supply and providing Danger 415 V, 150x100mm Enameled danger plates

OD359001/2023-2024:Painting letters or figures with enamel paint as identification mark to SB,DB panel board etc as required

OD359003/2023-2024:Supply and providing LED indicator lamp (Red, Green, Black, Yellow, Orange colours)in the existing panelboard and giving connectionRed ,Green, Black, Yellow, Orange

OD359004/2023-2024:Supply and providing 25x6 mm brass nut and bolt etc. as required

OD359005/2023-2024:Supply and providing 12x3 mm brass nut and bolt etc. as required

OD184660/2024-2025:Supply ,installation , testing and commissioning of Pump controller suitable for 3 phase 5 hp submersible open well motor pump set DOL starter , Relay range 4- 10 A, with over load protection , single phasing , phase reversal, phase unbalance, Auto re start , IP 54 protection ON/OFF indication lamp, push button, Voltmeter, Ammeter etc in sheet steel enclosure. (L&T make MUG -10 or equivalent)

OD184694/2024-2025:Supply , installation , testing and commissioning of 3 phase 3 hp vertical open well Submersible pump set with a maximum head of 57 metre , discharge 18,000 litre per hour at 41 metre head , in the existing open well using suitable tools and plants. (Head range 16 to 57 metre) .Deccan makes 3DE /3 model or equivalent.

90.14.24.16:Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required.1 KVAr, 3 phase, 440 V, delta connected, standard duty Metalised Poly Propylene Capacitor, Box Type, suitable for direct connection to motors.

2.10.2:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole and netural

14.13.1:Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required50 mm dia

Bidder Name

DINEESH M.P