Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹1.6 Cr
EMD Value
₹1.6 L
Closing Date
20 Nov 2026, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer, Panchayat (R&B) Division, Mahisagar
Construction of Minor Bridge on 2 x 12 MNB at Dhamothna Mohila to Baria Faliya to Nani Sarsan Gram Panchayat connecting road at Ch. 1/200 Ta. Santrampur Dist. Mahisagar.
363943
14 of 2026-27
Open
Civil Works - Bridges
Works
Mahisagar
8 documents required · 8 mandatory
₹3,600
Executive Engineer, Panchayat (R&B) Division, Mahisagar
₹1.6 L
6 Nov 2026
6 Nov 2026
6 Nov 2026
20 Nov 2026
6 Nov 2026
120 days
No. figures Amount
1 Excavation for foundation in sand, gravel, clay soft soils and 666.01 Cum 511.12
murrum etc. including shoring, strutting dewatering as necessary
and disposing of the excavated stuff as directed. (A) Depth upto
3.0 M. and lead upto 100m for 10 Cum.
2 Excavation for foundation in sand, gravel, clay soft soils and 102.47 Cum 599.64
murrum etc. including shoring, strutting dewatering as necessary
and disposing of the excavated stuff as directed. (B) Depth from
3.0 M. to 6.0 mt. and lead upto 100m for 10 Cum.
3 Providing and laying in foundation with ordinary cement concrete 33.31 Cum 3711.20
M-15 mix and providing necessary vertical pin headers including
formwork, vibrating, ramming and curing complete.
4 Diversion of water course / providing coffer dam and bund or 1.00 No. 5575.71
island as may be necessary for foundation and maintaining the
same for the period as may be necessary (A) Diversion by
channel (V) Pier nos.
5 Providing and casting in situ controlled cement concrete M-30 for 294.07 Cum 4879.52
R.C.C. raft and cut-off walls including necessary shuttering,
laying, vibrating, ramming and curing complete. (Foundation,
Abutment, 2. Pier)
6 Providing and laying in position I.S.I. mark Fe-550D T.M.T. bar 32.350 M.T. 73858.70
reinforcement including cutting, bending, hooking and tying
complete as per detailed drawing for the following. (A) Piers (B)
Abutment (C) R.C.C. returns.
7 Providing and casting in situ controlled cement concrete M-30 for 222.50 Cum 5486.45
R.C.C. works in piers, abutments and R.C.C. return as per
drawing including centering, shuttering, scaffolding wherever
necessary laying, vibrating, curing and finishing complete. (A)
Height from 0.0 mt. to 5.0 mt.
8 Providing and casting in situ controlled cement concrete M-30 40.20 Cum 5566.52
mix for R.C.C. works in pier cap, abutment cap and dirt wall
including controlled cement concrete M-35 bed block or pedestal
of required size below bearing as per detailed drawing, centering,
shuttering, scaffolding wherever necessary laying, vibrating,
curing and finishing complete.
9 Providing and laying in position I.S.I. mark Fe-550D (T.M.T.) 36.780 M.T. 73858.70
including cutting, bending, hooking, tying, welding etc. complete
as per detailed drawing for the following. (A) Abutment cap & dirt
wall (B) Pier cap.
10 Providing and laying weep hole in abutment and returns by using 187.00 No. 86.73
A.C. pipes of 100 mm dia. with laying in proper grade and jointing
the completed as per detailed specification.
11 Providing and casting in situ controlled cement concrete M-300 201.600 Cum 5611.58
for R.C.C. solid slab including centering, scaffolding curing and
finishing complete.
It. Rate in Total
Description of Item Qty. Unit
No. figures Amount
12 Providing and placing in position I.S.I. mark Fe-550D T.M.T. bar 16.130 M.T. 73243.02
reinforcement including cutting, bending, hooking and tying
complete as per detailed drawing. (i) Solid slab (ii) Deck slab.
13 Providing and casting in situ controlled cement concrete M-400 24.75 Cum 4782.97
for average 100mm thick wearing coat laid as directed including
tamping, vibrating, finishing, curing and filling in joints with
bitumen complete.
14 Providing and fixing post and pipe railing as per detailed drawing 66.00 Rmt. 1214.16
including 3 coats of painting to steel works complete.
15 Providing P.V.C. 100mm diameter water spout including 8.00 No. 159.37
necessary iron grating as per drawings.
16 Providing and casting in situ controlled cement concrete M-150 11.34 Cum 3849.87
for approach slab including form work, curing and finishing
17 Providing and casting in situ controlled cement concrete M-30 for 22.68 Cum 5417.82
approach slab including form work, curing and finishing complete.
18 Providing and fixing in position steel bar reinforcement of steel 4.74 M.T. 73243.02
grade I.S.I. mark Fe-550D (T.M.T.) including cutting, bending,
hooking, tying, welding etc. complete as per detailed drawing and
specification. (A) R.C.C. Approach slab (B) Wearing coat.
19 Providing and laying filter media 600 mm thick as directed at 106.96 Sq.m. 1239.36
back of abutment, returns and wing walls as per detailed
specifications. (Return wall)
20 Providing and filling sand behind abutment & between returns in 151.41 Cum 467.69
layers as directed etc. complete.
21 Providing and laying pitching on slopes laid over prepared filter 40.39 Cum 1051.41
media including boulder apron laid dry in front of toe of
embankment complete as per drawing and technical
specifications.
22 Providing and laying Filter material underneath pitching in slopes 20.20 Cum 877.69
complete as per drawing and Technical specification.
23 Providing and fixing 2 mm thick corrugated copper plate in metal 25.20 LM 2013.96
expansion joints as per drawings. Details of expansion joint 50 x
50 x 6mm size two IS and 100 x 6mm MS plate with 6 x 20 x
25mm long hold fast @ 50 cm / cc on both sides of expansion
24 Providing and laying in foundation with ordinary cement concrete 266.72 Cum 3711.20
M-15 mix and providing necessary vertical pin headers including
formwork, vibrating, ramming and curing complete.
25 Providing fusion bonded epoxy coating not less than 175 micron 27.00 M.T. 10162.62
thickness and up to 300 micron to reinforcement bars as per IS-
13620-1993/ATM-775M including testing of coating at plant and
all taxes (A) 10mm to 16mm dia. bar.
26 Providing fusion bonded epoxy coating not less than 175 micron 63.00 M.T. 7296.24
thickness and up to 300 micron to reinforcement bars as per IS-
13620-1993/ATM-775M including testing of coating at plant and
all taxes (B) 20mm to 32mm dia. bar.
It. Rate in Total
Description of Item Qty. Unit
No. figures Amount
27 Providing and laying BIS and CE certified polypropylene extruded 75.60 Sq.m. 100.77
biaxial geogrid TGP 2.0 having LCR and MIF value should be
1.46 and 1.95 respectively as reinforcement in granular layers,
indigenously manufactured from virgin high density polypropylene
having aperture size of (38 x 38)mm (+/- 5%) manufactured using
punched and drawn procedure using quality polypropylene. The
grid should have stiffness at 0.5% strain more than 600 kN/m,
Tensile Strength at 2% Strain more than 45 and Tensile Strength
at 5% Strain more than 90% and other parameters as per the
detailed tender specifications. For reinforcement application to
subgrade, unbound subbase / base courses & soil stabilization
etc. complete (Specification: MORTH Section-700) with prior
approval of concerned Superintending Engineer or Authority.
28 Providing and fixing in position mild steel dowel bars (I.S.I. mark) 18.00 No. 450.46
in pier caps or abutments caps for anchorage in fixed end as per
detailed drawing including cutting, bending and welding complete.
29 Providing and fixing in position mild steel dowel bars (I.S.I. mark) 18.00 No. 528.23
in pier caps or abutments caps for anchorage in free end as per
detailed drawing including cutting, bending and welding complete.
30 Clearing and grubbing road land including uprooting wild 0.024 Hect. 28393.04
vegetation grass bushes, shrubs, sapling and trees of girth up to
300mm removal of stumps of trees cut earlier and disposal of
unserviceable materials and stacking of serviceable materials as
per Clause-201 (area of light density) by mechanical means in
area of light jungle.
31 Box cutting the road surface to proper slope and camber for 198.00 Cum 109.42
making a base for road work including removing the excavated
stuff and depositing on the road side slope as directed within all
lead and lift.
32 Providing, laying and spreading Granular sub base (Grade-I) by 157.00 Cum 1145.34
providing close graded MCBT material in single layer with motor
grader on prepared surface, mixing by mix in place method with
rotavator at OMC and compacted with vibratory roller 80 to
KN static weight to achieve desired density etc. completed.
33 Providing & laying compacted WBM Grading-II using MCBT 117.00 Cum 1641.25
metal of size 53mm to 22.4mm in required layers including using
24% stone screening, 11.2mm size and 8% stone dust as filler
including spreading, watering and consolidation by vibratory roller
as per MORTH specification etc complete as directed by
engineer in charge.
34 Earthwork for embankment including breaking clods, dressing 2301.75 Cum 190.02
with all lead and lift including rolling with power roller, watering
and consolidation from borrow pits within land width.
35 Providing and laying compacted of specified quarry spaull in side 24.00 Cum 404.00
shoulder including carriage of material and spreading on
prepared base including compacting as per MOST specification
etc. complete.
36 Providing and filling in foundation with ordinary cement concrete 74.00 Cum 3341.16
1:3:6 (1 cement : 3 coarse sand : 6 crushed stone aggregate
20mm nominal size) mix and providing necessary vertical pin
headers including formwork, vibrating, ramming and curing
It. Rate in Total
Description of Item Qty. Unit
No. figures Amount
37 Providing and casting in situ ordinary cement concrete M-250 mix 149.00 Cum 4631.86
with Trimix C.C. Road laid as directed including vibrating, curing
and filling in joints with bitumen complete.
38 Providing and fixing I.S.I. mark T.M.T. Bar Fe-550D 2475.00 Kg. 77.29
reinforcement for R.C.C. work including binding, bending and
placing in position complete upto floor two level.
39 Hazard Marker Sign :- Providing and fixing sign board made out 2.00 No. 2423.74
of 2mm aluminium sheet size 90 x 30 cms. rectangle as per the
design / drawing attached (IRC) pretreated with phospheting &
acid etching, coated with one coat of epoxy primer and two coats
of best quality epoxy paint reflectorised with retro reflective
sheeting as per latest M.O.R.T.H. specification, 3.1m long (2
nos.) stand post and frame fabricated from suitable size iron
angle of 35 x 35 x 3mm & 50 x 50 x 5mm painted with best
quality epoxy coatings in black and white bends. The details of
symbol or inscription / numerals for each board shall be as per
instruction of Engineer in charge. The fixing at site shall be in
1:2:4 C.C. block of size 45 x 45 x 60cms for each leg including
excavation curing etc. complete under the supervision of
Engineer in charge (A) Engineer Grade (VR).
40 Direction sign (Junction board) :- Providing and fixing sign boards 2.00 No. 6375.50
made out of 2mm aluminium sheet size 244 x 122cms. rectangle
as per the design of IRC-67-1977 pre treated with phospheting
process & acid etching coated with one coat of epoxy primer and
two coats of best quality epoxy paint reflectorised with retro
reflective sheeting as per latest M.O.S.T. specifications, Letters
and numerals should be as per IRC-30-1968, 3.1m long (2 Nos.)
stand post and frame fabricated from suitable size iron angle of
50 x 50 x 5mm, 75 x 75 x 6mm as required, painted with best
quality epoxy coatings in black and white bends. The details of
symbol or inscription / numerals for each board shall be as per
the instruction of engineer in charge. The fixing at site shall be in
1:2:4 CC block of size 45 x 45 x 60cms. for each leg including
excavation curing etc. complete under the supervision of
engineer in charge. (A) Engineer grade. (VR)
41 Citizen's Information Board : Providing and fixing of typical 1.00 No. 24157.18
information board as per instruction. Two M.S. plate of 1.6mm
thick of 900mm x 750mm size fixed at top and bottom duly
welded with M.S. angle with angles of 25 x 25 x 5mm thick M.S.
plate shall be welded by two vertical M.S. flat and four horizontal
M.S. flats 5mm thick to 75mm x 75mm of 12 SWG square tube
posts duly embedded in cement concrete M-15 grade C.C.
blocks of 600 mm x 600mm x 750mm below ground level.
Painting new letters and figures of any shade with ready mixed
synthetic enamel paint of superior quality in required shade and
coloured, all sections of frame joints and steel tube will be
painted with primer and two coats of epoxy paint as per drawing
clause 1701 & Annexure 1700.1 (10.16).
42 Road marking with hot applied thermoplast compound with 24.00 Sq.m. 367.73
reflectorising glass beads on bituminous surface and laying of hot
applied thermoplastic compound 2.5mm thick including
reflectorising glass beads @250 gms/sqmt area, thickness of
surface applied glass beads as per IRC 35. The finish surface to
be level uniform free from streaks and holes.
It. Rate in Total
Description of Item Qty. Unit
No. figures Amount
43 Supply & fixing logo board of MMGSY diamond size (600mm x 1.00 No. 4129.89
600mm) 16 gauge & board plate size (900mm x 250mm)
gauge thick M.S plate and 2.40 mt. deep length single angle 75 x
75 x 6 mm size including fitting and painting lettering with
luminous color as per drawing etc. complete.
44 Cautionary Warning Sign :- Providing and fixing sign board made 4.00 No. 3808.66
out of 2mm aluminium sheet size 90 x 90 x 90 cms equilateral
triangle as per the design of IRC-67-1977. Pre treated with
phospheting process and acid etching coated with one coat of
epoxy primer and two coats of best quality epoxy paint,
reflectorized with retro reflective sheeting as per the latest
M.O.R.T.H. specification, 3.1 Mt. long stand post and frame
fabricated from suitable size iron angle of 35 x 35 x 3 mm, 75 x
75 x 6 mm; painted with best quality epoxy coating in black and
white bends. The details of symbol for each board shall be as per
the instruction of engineer in charge. The fixing at site shall be in
1:2:4 CC block of size 45 x 45 x 60 cms for each leg, including
excavation curing etc. complete under the supervision of
Engineer-in-charge. (A) Engineer grade (VR).
45 Informatory Warning Sign :- Providing & fixing sign boards made 2.00 No. 3856.90
out of 2mm aluminium sheet size 80 x 60 cms as per design of
IRC 67-1977. Pre treated with phospheting process and acid
etching coated with one coat of epoxy primer and two coats of
best quality epoxy paint, reflectorized with retro reflective
sheeting as per the latest M.O.R.T.H. specification, 3.1 mt. long
stand post and frame fabricated from suitable size iron angle of
35 x 35 x 3 mm, 75 x 75 x 6 mm; painted with best quality epoxy
coating in black and white bends. The details of symbol for each
board shall be as per the instruction of engineer in charge. The
fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60 cms
for each leg, including excavation curing etc. complete under the
supervision of Engineer-in-charge. (A) Engineer grade (VR).
46 Excavation for foundation up to 1.50 mt. depth including sorting 97.00 Cum 122.94
out and stacking of useful material and disposing off the
excavated stuff within all lead and lift for all sorts of soil.
47 Providing and laying in foundation with ordinary cement concrete 10.00 Cum 3341.16
M-100 mix and providing necessary vertical pin headers including
formwork, vibrating, ramming and curing complete.
48 Providing and casting in situ ordinary cement concrete M-150 mix 100.00 Cum 3917.79
and providing necessary pin headers including shuttering,
scaffolding, laying, vibrating, curing and finishing complete
without V-groove (A) height 0.0 to 5.0 mt.
49 Providing and fixing Guard stone as per I.R.C. type design 33.00 No. 350.81
including white washing etc. complete (i) Fixing in C.C. 1:5:10
50 Filling available excavated earth (excluding rock) in trenches, 49.00 Cum 136.92
plinth, sides of foundation etc. in layer not exceeding 20 cm in
depth consolidating each deposited layer by ramming and
watering etc. complete.
51 Supplying and fixing reinforced concrete heavy duty non-pressure 15.00 Rmt. 4710.56
pipes with collars for culverts including setting and joining the
pipes in C.M. 1:2 watering and laying (to level or slopes) of I.S.
class NP-4 of 900mm internal diameter.
It. Rate in Total
Description of Item Qty. Unit
No. figures Amount
52 Providing, laying and rolling 25 mm thick open graded premixed 10.00 M.T. 3826.89
bituminous carpet with B.T. aggregate as specified and using
bitumen (VG-30) for mixing with aggregate at the rate of 3.36%
i.e. 33.60 kg/M.T. of total mix including heating and mixing in
drum mix plant and spreading the same with paver finisher and
consolidation with vibratory roller as per MORTH specification
including necessary firewood, oil, lubricants, labour charges etc.
using contractor's own drum mix plant and equipment, tools etc.
completed in accordance with the requirement of specification.
53 Providing and laying seal coat with B.T. aggregate as specified 6.00 M.T. 4652.06
using aggregate at the rate of 0.18 cum/10 Sqmt and bitumen
grade (VG-30) for mixing with aggregate at the rate of 4.50% i.e.
45.00 kg/M.T. of total mix including heating and mixing in drum
mix pant, spreading the same with paver finisher and
consolidation with vibratory roller including necessary firewood,
oil, lubricants, labour charges etc. using contractor's own drum
mix plant and equipment, tools etc. complete in accordance with
the requirement of specification.
54 Providing and laying tack coat with bitumen emulsion (RS-1) at 188.00 Sq.m. 31.72
the rate of 4.00 Kg / 10 Sq.M. on the prepare bituminous surface
etc. complete as directed with all labour and materials.
TOTAL Rs.
i.e. Rs. One Crore Sixty Two lacs Sixty Eight thousand Twenty Seven and Ninety Five paisa only.
I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written
in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.
Estimated amount put to tender Estimated amount put to tender
Deduct………% below Add………% Above
Net Rs. ___________________________ Total Rs. ________________________
In words ____________________ In words ____________________
1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the
Engineer-In-Charge for which no extra payment shall be made.
2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3. GST and Income tax TDS will be deducted at a source while making payments of bills.
4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-
10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where
there is a change as per actual mix design the cost of difference of cement consumption have been deducted
from the rate of original item at the rate of input rate mentioned in all the tender.
5. Credit for dismantalled materials of amount of Rs. 1,48,475.60 must be recovered from 1st R.A. bill of
Contractor's.
Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me
and found order.
Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer
Panchayat (R & B) Sub Division, Panchayat (R & B) Division, Panchayat (R & B) Division,
Santrampur Mahisagar (Lunawada) Mahisagar (Lunawada)
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
212 GRs 1.pdf
212 GRs 2.pdf
212 GRs 3.pdf
212 GRs 4.pdf
212 GRs 5.pdf
BOQ.pdf
Drawings.pdf
General Techical Specifications.pdf
Specification Index.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .