Construction of Various types of Civil, Electrical and Landscape works of Lake Garden Development at Survey/Block No.60 and 63, Moje: Sachin in South Zone-B(kanakpur),Surat. (3rd Attempt)

Excavation for foundation including sorting out and stacking off

3 useful materials and disposing of the excavated stuff up to 50 mt.

lead and all lift, watering etc.comp.

Preparation of subgrade with compacting, Leveling and

consolidation of subgrade with miniroller/plate vibrator machine

including watering and filling in depression occur the process as

directed by engineer in charge.

Providing & laying Granular Sub Base confirming to Grading II of

Table 400.2 of compacted th. Of 150 mm with specified graded

stone metal and sand mixed in place and laid with mechanical

5 means spreading with motor grader and compactiong with 0.00 1418.04 C.M. -

vibratory roller having miimum 80-100 KN static weight to achieve

desired dencity of 98 % of MDD including all material, labour,

machinery with all leads and lifts etc. comp.

Providing & laying or Fixing of River pebbles (Size as per

Architect/Consultant Suggesion and instruction) with specified

graded stone metal and sand mixed in place and laid with

6 mechanical means spreading with motor grader and 0.00 19746.00 M.T. -

compactiong with vibratory including all material, labour,

machinery with all leads and lifts etc. comp. with conveyency

charges etc.as per directed by engineering incharge.

Providing and filling rubbles including hand packing and filling

interstices with quarry spalls behind abutments and between

returns as directed.

R & B SOR. CH-27 27006A

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 Crushed

stone agg 20m.m Nominal size)&curing comp. Excl. cost of form

work in :(a) foundation & Plinth

Providing and laying cement concrete 1: 4: 8 (1 cement : 4coarse

9 sand :8 graded stone aggregates 40 mm nominal size) and curing

complete exxcluding cost of formwork in:

(A) Foundation and plinth 0.00 2680.21 C.M. -

Filling in trenches with available excavated earth in layer not

10 exceeding 20 cm in depth consolidating each deposited layer by 658.00 130.39 C.M.

ramming & watering

Providing & filling in plinth with yellow soil/Good Quality Garden

11 Soil(Free From Inert Material) or selected soil in layers of 20 cm. Th'. 5680.00 289.06 C.M.

Incl. watering, ramming & consolidation etc. complete.

Providing and filling in foundation and plinth with available of

Mixed soil or selected soil in layers of 20 cm. thickness including

watering, ramming and consolidation as directed by engg.

incharge etc. comp.

providing and laying 200 micron (LDPE) plastic sheet on prepared

sub base as per instruction of Engg. In charge etc. complete.

Supplying & filling fine sand(pana) in 75 mm / 100 mm / 150 mm

compacted thickness over the base including necessary

14 compaction, watering etc. complete. Item includes leveling by 728.00 413.09 C.M.

using vibratory plates compacted machine and as directed by

engineer in charge

Providing and fixing c.c m-20 grade (Size 300mm X 380mm)

purchased from SMC's approved paverblock manufacturer &

setting in line level and in truly vertical postion, including filling

joints in C.M. 1:1 (1 part of cement : 1 part of stone dust ) smooth

pointing in C.M. 1:1 ( 1 part of cement : 1 part of coarse sand)

including watering etc. complete and as directed by engineer in

charge. CHAMFERD EDGE KERB (size & colour as per

Architect/Consultant Instruction & Suggesions)

R.C.C kerb 300 mm Width, 125 mm Thickness and 380 mm Height 0.00 605.00 R.MT -

Providing 125mm th. Ready made Vacuum wet Pressed c.c. kerb

of strength M-25 (Size 60 Cm x 45 Cm X 12.5 cm) bull nose kerb

approved Brand paverblock manufacturer & setting in line level

and in truly vertical postion, including filling joints in C.M. 1:1 (1 part

of cement : 1 part of stone dust ) smooth pointing in C.M. 1:1 (

part of cement : 1 part of coarse sand) including watering etc.

complete and as directed by engineer in charge. (R.C.C kerb

mm Height and 125 mm Thickness)

Providing 125 mm th. Ready made Vacuum wet Pressed c.c. kerb

of strength M-25 (Size 60 Cm x 30 Cm X 12.5 cm approved Brand

manufacturer & setting in line level and in truly vertical postion,

including filling joints in C.M. 1:1 (1 part of cement : 1 part of stone

dust ) smooth pointing in C.M. 1:1 ( 1 part of cement : 1 part of

coarse sand) including watering etc. complete and as directed

by engineer in charge. (R.C.C kerb 300 mm Height and 125 mm

Providing 100mm thick readymade C.C. kerb of strength M-20 (size

300mm x 380mm) purchased from SMC's approved paverblock

manufacturer & setting in line, level and in truly vertical position,

18 including filling joints in C.M. 1:1 (1 part of cement : 1 part of stone 2745.00 228.00 R.MT

dust) smooth pointing in C.M. 1:1 (1 part of cement : 1 part of

coarse sand) including watering etc. complete and as directed

by engineer in charge.

Providing 150mm th. Ready made Vacuum wet Pressed c.c. kerb

of strength M-25 (Size 60 Cm x 77.5 Cm X 15 cm) bull nose kerb

approved Brand paverblock manufacturer & setting in line level

and in truly vertical postion, including filling joints in C.M. 1:1 (1 part

of cement : 1 part of stone dust ) smooth pointing in C.M. 1:1 (

part of cement : 1 part of coarse sand) including watering etc.

complete and as directed by engineer in charge. (R.C.C kerb

mm Height and 150 mm Thickness)

Providing interlocking type Rubber moulded cement concrete

paver block of approved shape, design & colour having 60mm

thickness (M-35) purchased from SMC's approved paverblock

20 manufacturer only & fixing of fine sand bedding. Item includes 10.00 524.00 S.M.

levelling by using vibratory plates compacted machine. Item also

includes all materials, labour, equipments, tools, plants, watering,

cleaning etc. complete. (With colour)

Providing and Fixing interlocking M-35 60 mm thick HSF & ETF paver

block The paver block is fixing on 75mm thik.sand bed in proper

21 line,level with watering and compaction etc. as per directed by 130.00 756.00 S.M.

engg. and architect (size & colour as per Architect/Consultant

Instruction & Suggesions)

Providing and Fixing interlocking M-35 75 mm thick paver block

Grass/eco paver The paver block is fixing on 75mm thik.sand bed

22 in proper line,level with watering and compaction etc. as per 10.00 999.00 S.M.

directed by engg. and architect (size as per Architect/Consultant

Instruction & Suggesions)

Providing and Fixing interlocking M-35 60 mm thick Cobble Square

paver block The paver block is fixing on 75mm thik.sand bed in

23 proper line,level with watering and compaction etc. as per 670.00 1085.00 S.M.

directed by engg. and architect (size & colour as per

Architect/Consultant Instruction & Suggesions)

Provideing and laying EPDM ( Ethylene Propylene Diene

Monomer) in multi colour Water Resistance,Durable, UV Stable,

High & Consistent Quality Product Density 1.6+-0.05 G/CM3,

Hardness 60+-4.5 SHA, Tensile strenth > 5M Pa, Elongation at break

500%, Bulk Density (1-3.00 mm Approx), 670 g/dm3, polymer

content > 22%, uv resistant 4 grey scale rating, Flammability - HB.

Total Thickness 35MM (First Layer of 29mm Thick Black SBR &

Second Layer of 6MM Thick ColourEPDM)

Providing and Fixing 60 mm thick Flagstone in size as per officer

incharge. The flagstone is fixing on 75mm thik.sand bed in proper

line,level with watering and compaction etc. as per directed by

engg. and Architect/Consultant Instruction & Suggestions

Providing & laying cement concrete Pavement using 1:1.5:3 (1

cement:1.5 sand:3 graded stone agg. 20 mm nominal size) &

Vaccuum Dewatering technique including floating surface with a

skim powder floater, curing etc. complete.

Internal road 131.00 5981.00 C.M.

Providing & laying Mud cement concrete Pavement using

1:1.5:3:1 (1 cement:1.5 sand:3 graded:1 Mud Soil stone agg.

mm nominal size) & Vaccuum Dewatering technique including

floating surface with a skim powder floater, curing etc. complete.

Internal road 0.00 5179.08 C.M. -

Cutting of Groove 5.00 mm th. In VDS for depth of 2/3 of total

thickness with filling of Bitumen

Providing and fixing TMT FE-500 bar reinforcement for R.C.C. work

including binding and placing in position etc. comp.

Upto G.L./P.L. 37280.00 76.21 Kg.

Uncoursed rubble masonary with hard stone of approved quality

30 in foundations and plinth in cement mortar 1:6 (1 Cement : 6 270.00 2500.01 C.M.

sand) including leveling up etc. complete.

Pointing on Coursed stone masonary with cement mortar 1:3

(1cement : 3 Sand) ---(A) Flush Pointing

Providing and Fixing Of M.S. cycle Stand As Per Architect

Suggesion & Insutructuins & Drawings.

Providing and Fixing Of Sculpture & Mural Weight 100 to 120 KG As

Per Architect Suggesion & Insutructuins & Drawings.

providing and laying of Cement Mortar 1:4(1-Cement: 4- fine sand

34 ) Includ.cost of form work but exclu. Cost of reinforcement for 0.00 2835.33 C.M. -

reinforced concrete work.

Under Ground water Tank : Providing and laying ordinary C.C.

1:1.5:3 mix for R.C.C. work including boxing centering,vibrating,

curing and mixed with approved water proofing cement

compound or "CEMWET" or "PIDICRETE LW" intergral water

proofing addmixture as water proofing agent to be mixed with

kgs. cement bags shall be as recommended by the manifacture

of the water proofing material, concrete work for top, bottom slab

and side pardi for underground tank and item inclusive necessary

excavation and refilling the available earth, 15 cm th C.C. 1:4:8

for bedding conc., half B.M. in C.M. 1:4 outside wall, inside pardi as

per design, 10 mm th water proffing cement plaster in C.M. 1:3

with smooth finishing, watering etc. comp. to all inner face of tank

curing etc. comp. incl. PVC steps, outlet , inlet, over flow and

wash out pipe arrangment as necessary with M.S.Cover of 25 Kgs.

with locking arrangement fixing glazed tiles of approved make

such as Orient, Kajaria, Jhonson,Nitco,Somani ,Bell or equivalent

make of commercial quality of approved colour and size to sides

and bottom of water tanke xcluding free board of 20 cm etc. as

per structural drawing excl. steel and as directed by Engr. in

Providing and laying white glazed tiles 6mm thick in flooring treads

of steps and landing laid on a bed of 12mm thick cement mortar

1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in white

Providing & Laying white glazed tiles 6mm. th. of Orient, Kajaria,

Jhonson,Nitco,Somani ,Bellmakeat all floor levels, in flooring,

37 treadsof steps&landings 36.00 857.42 SM

laidonabedof12mm.Av.Th.C.M.1:3(1cement :3sand) finished with

flush pointing in white cement etc.com. For all floors

Providing&constructionsimplechamberof23cm.

th'B.B.MasonaryinC.M 1:5withcement plaster15mmth' inC.M.1:3

inside&outside toexposed faces,R.C.C. topslabwith1:2:4mix (

38 1cement: 2Sand : 4Gradestone aggregate20mmsize) 60.00 2932.93 No

,Foundationconcrete1:5:10&fixingC.I. coverwith frametobenot

lessthan38kg.Ontopetc.comp. Insidedimension,455x 610 mm &450

mm deep for single pipe

Providing, Lowering & laying of Readymade M-25 Vacuum wet

Pressed Water Drain (Dished) Channel (600 x 300 x 100 mm )

approved Brand manufacturer & setting in line level and in truly

39 vertical postion, including filling joints in C.M. 1:1 (1 part of cement 1000.00 703.00 RM

: 1 part of stone dust ) smooth pointing in C.M. 1:1 ( 1 part of

cement : 1 part of coarse sand) including watering etc. complete

and as directed by engineer in charge.

Providing, Lowering & laying joining R.C.C NP2 CLASS pipe in C.M

40 1:1 of following nominal internal diameters incl. Testing of pipes

and joints etc. Comp

Providing and Supplying ISI standard R.C.C. pipes (of Sulphate

Resisting Cement) in standard lengths of following class and

diameter suitable for either collar joints or rubber ring joints

including all taxes, insurance, transportation, freight charges,

octroi, inspection charges, loading, unloading, conveyance to

department stores, stacking etc. complete.(IS 458 / 1989)

Lowering, laying and jointing RCC pipes in C.M. 1:1 of following

diameters in proper position, grade and alignment at all level as

directed by Engineer-in-charge including conveyance from stores

to site of work, labour, giving hydraulic testing as per ISI code. -

Class NP3 Test Pressure 0.7 Kg. / sq. cm.

NP3 Class RCC Pipe

(iii) 350mm dia 5.00 1709.45 RM

Providing & Fixing 3 mm thick metal sheet with CNC cutting to fix it

on vertical surface.Steel work welded in built up sections, framed

work including cutting, hoisting, fixing in position and applying a

42 priming coat of red lead paint in beams & joists channels angles, 20.00 2677.00 S.M.

tees, flats with connection plates or angle cleats as in main &

cross beams, hip & trussed purlins connected to common raffers &

Providing & Fixing of 100mm dia M.S. Bollard height 900mm at

43 fixing with nessasory hardwares incl. cleaning the surface of all dirt, 2.00 2730 Nos.

dust & other foreign matter etc. Comp.

Demolition including stacking of serviceable materials with all

lead and lift. (i)) RCC Work

Demolition of brick work and stone masonry including stacking of

45 serviceable materials and disposal of unserviceable materials with 0.00 550.4 CM -

all lead and lift. (i) In Cement Mortar

Removing and scraping of old deteriorated plaster of any

thickness from wall / RCC member including stacking of

serviceable material and disposal of unserviceable from site of

work with all lead and lift.

Providing and Fixing Of Water Curtain Foutain including (China

mosaic tiles, water proofing, pardi, reinforcement, plumbing work,

47 mortor etc. relevant accessories to be added in item description) 1.00 320574 Nos.

of 1 HP. motor With Plumbing Work As Per Architect Suggesion &

Insutructuins & Drawings.

Providing and fixing of Floating Fountain With Lights Material

Ceramic Shaft and Bearings, Plastic with domestic monoblock

water pump with 0.25 H.P. motor, suitable for operation on

volts 50 c/s. AC supply with metallic flange, delivery and

discharge of 32 LPM at 10 mtrs.head.with 1.50 Sq.mm 3 core

Mtr Wire. With Digital Timer Electro power Make

Providing and fixing decorative sculptures (custome made) of

Altra Resins Thickness 3mm To 5mm or Cement material and iron

materil and fixing them properly at places & Item incl. necessary

excavation & refilling the available earth, 15 cm th' C.C 1:4:8 for

bedding concrete and concrete foundation with all fixtures etc.

as per detail drawing and instruction of Architect/Engg. Incharge.

Filling in Red soil as aproved by engineer in charge For Red Soil

layers in including watering, ramming and consolidating and

50 achieving required density soil must have property of not eroding 100.00 1050 C.M.

,holds water and soft. The rate includes all labour and machinary

and spreading in layers and transportation complete.

Total amount of Part - 1A

Total amount of Part - 1A

PART1B - ENTRANCE GATE

Excavation for foundation includ.sorting out & stacking of useful

1 materials & disposing of the excavated stuff upto 50 mt. Lead & all

lift, watering etc. Comp. (A) Loose or Soft soil-With Manual Labour

(A) loose or soft soil

Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ piles) &

disposal of the surplus excavated soil as directed within a lead of

50 M. For following diameter of piles. (2) 250 mm

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 Crushed

3 stone agg 20m.m Nominal size)&curing comp. incl. cost of

(A) Foundation and plinth 15.00 3005.76 C.M.

Providing, mixing, placing, compacting by machine vibrator,

curing, testing M25 Design mix concrete as per IS 456:2000

4 (latest revision) and as per tender specification in all items

including cost of form work and rendering but excluding cost of

reinforcement.:

(A) foundation, footing, base of columns and mass concrete 14.00 4180.62 C.M.

Providing, mixing, placing, compacting by machine vibrator,

curing, testing M25 Design mix concrete as per IS 456:2000

5 (latest revision) and as per tender specification in all items

including cost of form work and rendering but excluding cost of

reinforcement.:

(1) Having cross sectional area upto

upto G.L./P.L. 2.00 12587.74 C.M.

(2) Having cross sectional area more than 0.085 and up to 0.12 sq.

upto G.L./P.L. 4.90 11136.62 C.M.

(3) Having cross sectional area more than 0.12 sq. mt.

upto G.L./P.L. 0.00 9190.79 C.M.

Providing, mixing, placing, compacting by machine vibrator,

curing, testing M25 Design mix concrete as per IS 456:2000

(latest revision) and as per tender specification in all items

including cost of form work and rendering but excluding cost of

reinforcement.:

(1) Having cross sectional area upto 0.08 sm.

upto G.L./P.L. 0.30 8994.86 C.M.

(2) Having cross sectional area more than 0.08 sq. mt and upto

upto G.L./P.L. 1.00 8075.85 C.M.

(3) Having cross sectional area more than 0.12 sq.mt.

upto G.L./P.L. 0.00 6999.09 C.M.

Providing, mixing, placing, compacting by machine vibrator,

curing, testing Cement Concrete M25 Expose work as per IS

456:2000 (latest revision) as per tender specification in all items

including cost of form work and rendering but excluding cost of

reinforcement. '( C1 ) RCC Pardi

upto G.L./P.L. 9.00 7914.24 C.M.

Providing & fixing TMT FE 500 Bar reinforcement for R.C.C. work

incl. bending, binding & placing in position etc.comp.

Upto G.L./P.L. 6981.00 76.21 Kg.

Providing and constructing brick work using fly ash building bricks

having crushing strength not less than 35 kg/sqcm. in foundation

and plinth in cement mortar 1:6 (1 cement :6 fine sand) etc.

upto G.L./P.L. 10.00 4237.00 C.M.

Filling in trenches with available excavated earth in layer not

8 exceeding 20cm in depth consolidating each deposited layer by 106.00 130.39 C.M.

ramming & watering

Filling in foundation and plinth with yellow or selected soil in layer

9 of 20 cm thickness including watering ramming and 38.00 289.06 C.M.

consolidationg etc.comp.

Providing & Applying 20mm. Th. Roller plaster on walls or similar

surfacesat all floor levels consisting of 12 mm av. Th. Backing coat

of C.M. 1:3 (1cement:3 sand) & 8 mm. th. Finishing coat of C.M. 1:1

(1 cement: 1 sand)apply thick cement slurry and apply roller

horizontal as well as vartical (two times ) up to good quality and

size of grain in elevation as perdirected by engineer incharge.

upto G.L./P.L. 57.00 324.00 S.M.

Total amount upto plinth (A)

Total amount upto plinth (A)

(B) WORK ABOVE PLINTH LEVEL

Providing, mixing, placing, compacting by machine vibrator,

curing, testing Cement Concrete M25 Expose work as per IS

11 456:2000 (latest revision) as per tender specification in all items

including cost of form work and rendering but excluding cost of

reinforcement. (A) Columns :

(1) Having cros sectional area upto 0.085 sq. mt

Ground Floor 0.00 14519.60 C.M.

Terrace Floor 0.00 14519.60 C.M.

(2) Having cros sectional area more than 0.085 sq. mt and upto

Ground Floor 8.50 12513.80 C.M.

Terrace Floor 1.00 12513.80 C.M.

(3) Having cros sectional area more than 0.12 sq.mt.

Ground Floor 0.00 10163.67 C.M.

Terrace Floor 0.00 10163.67 C.M.

Providing, mixing, placing, compacting by machine vibrator,

curing, testing Cement Concrete M25 Expose work as per IS

456:2000 (latest revision) as per tender specification in all items

including cost of form work and rendering but excluding cost of

reinforcement.( B ) Beam:

(1) Having cross sectional area up to 0.08 sq. mt.

Ground Floor 0.00 10717.09 C.M.

(2) Having cross sectional area more than 0.08 sq. mt and upto

Ground Floor 13.00 9453.03 C.M.

(3) Having cross sectional area more than 0.12 sq.mt.

Ground Floor 0.00 7971.98 C.M.

Providing, mixing, placing, compacting by machine vibrator,

curing, testing Cement Concrete M25 Expose work as per IS

456:2000 (latest revision) as per tender specification in all items

including cost of form work and rendering but excluding cost of

reinforcement. (C) Slab:

Ground Floor 14.00 6755.99 C.M.

Providing, mixing, placing, compacting by machine vibrator,

curing, testing M25 Design mix concrete as per IS 456:2000 (latest

revision)and as per tender specification in all items including cost

of formwork and rendering but excluding cost of reinforcement

Ground Floor 1.00 9419.25 C.M.

Ground Floor 0.50 6913.25 C.M.

Providing & fixing TMT FE 500 Bar reinforcement for R.C.C. work

incl. bending, binding & placing in position etc.comp.

Ground Floor 5420.00 76.21 Kg

Terrace Floor 180.00 77.21 Kg

Providing and constructing Expose red brick work using Expose red

brick bricks having crushing strength not less than 75 kg/sqcm.

including cutting, curing, fixing with 10 to 12 mm groov in cement

mortar 1:4 (1 cement :4 fine sand) etc. comp

Ground Floor 20.50 17624.00 C.M.

Providing & constructing Half brick masonary in Fly Ash bricks

14 having crushing strength not less than 35 kg/sq.cm in c.m 1:4 (1

cement: 4 sand) curing etc complete.

Ground Floor 0.00 719.57 S.M.

Providing & Applying 10mm.th.cement plaster in single coat on

brick/ concrete walls similar surfaces for plastering & finished even

15 & smooth with a floating coat of cement slurry mixed with

admixture of lime or neeru in required proportion etc. comp. in

C.M 1:3 (1 cement : 3sand)

(A) for wall and similar surfaces

Ground Floor 82.00 189.79 S.M

Terrace Floor 0.00 217.93 S.M

(B) for ceilings and soffits of stairs

Ground Floor 109.00 214.60 S.M

Terrace Floor 0.00 242.74 S.M

Providing & Applying 20mm. Th. Roller plaster on walls or similar

surfacesat all floor levels consisting of 12 mm av. Th. Backing coat

of C.M. 1:3 (1cement:3 sand) & 8 mm. th. Finishing coat of C.M. 1:1

(1 cement: 1 sand)apply thick cement slurry and apply roller

horizontal as well as vartical (two times ) up to good quality and

size of grain in elevation as perdirected by engineer incharge.

All Floor 11.00 324.00 S.M

Providing 35 mm wide throating or plaster drip and moulding it to

R. C. C. chajja etc. comp.. For all floor Market Rate.

Providing and applying 20mm. thick cement plaster patta of c.m.

1:3 ( 1cement : 3 sand ) etc. comp.

All Floors 40.00 50.00 R.M

Providing 20 mm deep finished groove in plaster in line and level

All Floor 100.00 50.00 R.M

Providing and laying polished Kota stone slab flooring over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6-coarse

sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and

jointed with grey cement slurry mixed with pigment to match the

shade of slab including rubbing and polishing etc. complete.

All Floor 0.00 989.45 S.M

Providing and laying polished kota stone slab 25mm thick in risers

of steps,skirting Dedo and pillars laid on 10mm thick cement

21 mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray

cement slury mixed with pigment to match the shade of slab

including rubbing and polishing etc. complete.

All Floor 0.00 1076.94 S.M

Providing & laying granite slab 18mm thick in flooring, treads of

steps and landing laid on bed of 20mm thick cement mortar 1:6 (1

22 Cement : 6 coarse sand) or lime mortar 1:1.5 laid and finished with

flush pointing in white or colour cement including rubbing and

polishing complete. (Basic Rate:- Rs.1614.0/S.M.)

Ground Floor 29.00 2410.00 S.M.

Providing & laying granite slab 18mm thick in skirting, risers of steps,

dedo and pillars laid on 10mm thick cement mortar 1:4 (1 Cement

23 : 4 Coarse sand) and finished with flush pointing in white or colour

cement including rubbing & polishing comp.. (Basic Rate:-

All Floor 3.00 2449.00 S.M.

Providing & laying granite slab 18mm thick in Window-Door seal

Frame Etc laid on 10mm thick cement mortar 1:4 (1 Cement :

24 Coarse sand) with nessary adhesive material and finished with

flush pointing in white or colour cement, including rubbing &

polishing comp.. (Basic Rate:- Rs.1200.0/S.M.)

All Floor 7.00 2026.00 S.M.

(A) Labour Charges For Half Round Edge For Granite 0.00 85.00 S.M.

(B) Labour Charges For Quater Round Edge For Granite 0.00 51.00 S.M.

(C ) Labour Charges For Edge Finished For Granite 55.00 43.43 S.M.

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand)

on new surface or fixing on existing flooring by adhesive material

including dismentaling of existing flooring and jointed with color

cement slurry including finised with flush pointing & cleaning the

surface etc. complete for antiskit

Ground Floor 22.00 1383.99 S.M

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in

flooring treads of steps and landing laid on a bed of 12mm thick

cement mortar 1:3 (1 cement : 3 coarse sand) finishing with flush

pointing in white cement.

All Floor 90.00 1040.35 S.M

Providing and fixing FRP FRAME size 125 x 65 mm and 35 mm thick

FRP shutter with wood grain raised panneled design finish shutter

having extra reinforcement on sides & edges in Gel coat finish. The

core of the shutter & frmae is to be filed up with injected

polyurethene foam done in situ along with embedded wooden

27 pieces for stiffening & also taking hinges & fixtures. The whole FRP

frame & shutter is to be water proof weather proof,termite proof

&resistance to mild acid/alkali. Rates are to be inclusive of

S.S.hinges with fastener sleeve & alluminium fixtures & fastentings.

Product should have 3 years performance guarantee and

company have ISO 9001-2000 certificate.

Ground Floor 0.00 2019.98 S.M

Providing & fixing 35mm.th. Flush Door Solid Double Core type Both

Face water proof Ply Vennered & 1.5 mm th.laminate shall be

pasted on both side with adhesives as specified by the

28 manufacturers. The laminate shall be as per approved shade & 4.50 3720.00 S.M

texture, of make incl. Sal wood frames of finished size 12cm x

7cm.incl. S.S. Hinges with nessary screws & Anodized aluminum

fixtures & fastenings For all Floor

Providing and fixing window having extruded aluminium Powder

Coated section frame main outer size 63.50 x 38.10 x1.95 mm (of

Jindal section no.4605, @ Wt. 1.094Kg/mt) horizontal Two track

member size 61.85 mm x 31.75 mm x 1.20 mm (of jindal section

no:8687, @ Wt. 0.695 Kg/mt.) vertical member of size 61.85 mm x

31.75 mm x 130 mm (of jindal section no:8758 @ wt. of 0.659 kg/mt)

with sliding shutters of horizontal member size 40 mm x18 mm x

1.29 mm ( of jindal section no:8949, @ Wt. of .456 Kg/mt) vertical

member of size 40 mm x 18 mm x 1.29 mm (of jindal section

no:8947, @ Wt. of 0.456 Kg/mt/section 8948, @ Wt. of 0.457 Kg/mt)

with 5 mm thick tranparent bronze colour tineted float glass with

powder coated aluminium fittings and fixtures and transparent

silicon sealant glass fixing to frame as per details etc. complete for

window. (A) Same as above but Colour anodized

All Floor 8.00 2140.33 S.M

Providing and fixing standared extruded of alluminium section of

size 63mm x 38.10mm x 1.2mm , @ Wt. 0.643 Kg/mt with colour

Powder Coated alluminium frame for ventilation with 5 mm thick

frosted glass as details etc complete for Ventilation

All Floor 0.00 2414.00 S.M

Providing and fixing M.S. grills of required pattern to wooden

frames of windows etc. with M.S. flats at required spacings and

frame alround, square or round bars with round headed bolts and

nuts or by screws (A) Plain Grill.

Painting two coats (excluding priming coat) on new steel and

other metal surface with enamel paint, brushing, interior to give

32 an even shade including cleaning the surface an even shade

including cleanicn the surface of all dirt, dust and other foreign

(A) For plain grill For all Floor 18.00 65.31 SM

Apply two coats of Birla or Asian acrylic lappy (putty) and two

coats of primer of approved brand and manufacture on new wall

33 surface to give an even shade including thoroughly brushing thr

surface free from mortar dropping and other matter and sand

papered smooth.

(A) for wall and similar surfaces 82.00 79.39 S.M

(B) for ceilings and soffits 109.00 79.39 S.M

Wall painting with two coats of acrylic emulsion plastic paint of

approved brand over existing surface to give an even shade &

surface free from mortar dropping & other foreign matter & sand

papered smooth etc. comp.

(A) for wall and similar surfaces 82.00 78.60 S.M

(B) for ceilings and soffits 109.00 83.96 S.M

Providing & applying two coats of weather shield max paint (3

coats may be required in case of darker colours.)of ICI Dulux or

Apex Ultima of Asian Paint including applying exterior acrylic

primer coat as per manufacturers specification and directions in

shade and colour approved by architects, on exterior surfaces of

the building including scaffolding, preparing the surface, watering,

curing etc. complete and as directed by the architects and

Surface Preparation :

surface is thoroughly clean, dry and free from all loose dirt, chalk,

grease, fungi, algae and flaking paint. This can be achieved by

brushing with a wire/ stiff coir brush, followed by water jetting if

required. Fill up all minor cracks and defects with white cement

and sand mixture in the ratio 1:3. For application on previously

painted wall, previous coatings of paint must be thoroughly

scraped off and Clean the surface thoroughly using wire brushes.

Apply a liberal coat of exterior acrylic primer and allow it to dry for

4-5 hours. Application of putty is not recommended.

Minimum 4-6 hours duration is required between each coat of

weather shield max paint

MS Box Section Steel work welded in built up sections, framed

work including cutting, hoisting, fixing in position and applying a

priming coat of red lead paint (A) in beams & joists channels

36 angles, tees, flats with connection plates or angle cleats as in 6865.00 126.00 Kg.

main & cross beams,hip & trussed purlins connected to common

raffers & the like. including necessary hardware and labour

etc.complete & instructed by in EIC & Architect.

Providing and fixing Staainless steel (Garde 304) railling made of

Hollow Tubes,Channels, plates Polising and making curvature

(Whereever Required) and fitting the same with necessary stainess

steel Bolts etc. of required size, on the top of the floor or the side of

waist slab with suitable arrangement as per approval of EIC. ( For

payment perpose only weight of stainless steel member shall be

consider excluding fixing accessories such as nuts, bolts, fastners

Total amount of Ground floor (B)

Total amount of Ground floor (B)

(C) WATER SUPPLY AND SANITARY ITEMS

Providing and fixing PVC SWR Nahni trap IS 14735 for drain -

110x110 mm diameter with jali of the following nominal diameter

of self cleaning design with C.I. scread down or hinged grating

including the cost of cutting and making good the walls.

All floor 2.00 558.36 No

Prov. & Fixing S.W. Gully trap with C.I.grating brick masonary (C.M

1:5)chamber & water tight C.I. cover with frame of

39 300mmx300mm size (inside) with weight includ. plastering smooth 2.00 1292.19 No

inside & outside 15mm. th' in C.M.1:3 etc. comp. (i) Square mouth

traps---(A) 100mm x 100mm Size -P type

Prov. & Fix. 10 cm.x15 cm.(4" x 6") S.W. trap with Inside dimension

,455 x 610 mm & 450 mm deep sewer trap chamber with 23 cm th'

B.B. masonary walls in C.M 1:5 with cement plaster 15 mm th' in

C.M. 1:3 inside & outside to exposed faces, R.C.C. top slab with

1:2:4 mix ( 1 cement: 2 Sand : 4 Grade stone aggregate 20mm

size) ,Foundation concrete 1:5:10 & fixing Precast RCC heavy duty

cover on top etc. comp. for single pipe.(A) Same as above but

precast RCC heavy duty cover instead of C.I cover

Providing & construction simple chamber of 23 cm. th' B.B.

Masonary in C.M 1:5 with cement plaster 15 mm th' in C.M. 1:3

inside & outside to exposed faces, R.C.C. top slab with 1:2:4 mix (

1 cement: 2 Sand : 4 Grade stone aggregate 20mm size)

,Foundation concrete 1:5:10 & fixing Precast RCC heavy duty

cover On top etc. comp. Inside dimension,455 x 610 mm &450

mm deep for single pipe (A) Same as above but precast RCC

heavy duty cover instead of C.I cover

Providing laying (to level or slopes) and jointing reinforced

concrete Light duty non-pressure pipes I.S. class NP2 of the

following internal diameter with collars and butt ends prepared for

collar joints including testing of joints complete.

Providing & fixing U-PVC pipes Confirming to IS no. 13592 (Type "A")

of Prince/Supreme/Jain/Astral/ Tulsi/Finolex make for rain water at

all floor levels incl. fixtures like bends, tees, shoe etc joined with

resin of approved brand & manufacture etc. comp. (M.R.)

Providing & fixing G.I. Rain water spout of 50 mm.dia & 30 cm

All floors level 4.00 101.91 No.

Providing & fixing Z - clamps at all floor levels of approved design

45 to C.I. S.C.I or PVC pipes including the cost of cutting holes &

making good the wall etc. Complete - 100 mm. dia. (M.R.)(RA- )

NOTE :- (1) The whole work is to be executed through specialized

agency with a guarantee of 10 (Ten) years given on a prescribed

proforma duly stamped (2) The rate shall include for work at all

floors & conducting water proof test as directed. (M.R.)

(A) Providing and laying water proofing treatment to vertical and

horizontal surfaces of depressed portions of W.C.,kitchen and the

like consisting of :

(a) I course of applying cement slurry @ 4.4 kg/sqm mixed with

water proofing compound conforming to IS : 2645 in

recommended proportions.

(b) II course of a layer of plaster in C.M. 1:3 with water proofing

compound confirming to IS:2645 about 25 mm. th' in the floor of

the depression & about 18mm th' On the side walls of the

depression up to the floor level, water proofing plaster about

mm. th' be continued on the walls above the floor level for a

height of 600 mm. with surface suitable to receive further

(c) Finishing top with stone aggregate 10mm to 12mm nominal

size spreading @0.008 C.M./S.M., thoroughly embedad in plaster

as per specifications & instructions of Engineer in charge (Cement

consumption 0.316 Bags / S.M.)

(B) Providing and laying integral cement based water proofing

treatment including preparation of surface as required for

treatment of roofs, balconies, terraces etc. consisting of following

(a) Applying and grouting a slurry coat of neat cement using

kg/sqm of cement admixed with proprietary water proofing

compound comforming to IS:2645 over the R.C.C. slab including

cleaning the surface before tratment.

(b) Laying cement concrete using broken bricks/brick bats 25 mm

to 100 mm size with 50% of cement mortar 1:5 (1 Cement :

Coarse sand) admixed with proprietary water proofing compound

conforming to IS:2645 ,brick bats is finally covered by jointless

cement plaster 20mm th. in C.M. 1:4 added with special water

proofing compound confirming to IS:2645 & top smooth finished

with trowel with false chequered marking of 300 mm.size.The

treatment is carried along the vertical surface of the parapet &

other adjoining wall up to height of about 300 mm in a shape of

quarter round vata Incl. curing etc. Comp. With average

thickness of 120 mm and minimum thickness at khurra as 65 mm.

(c) The whole terrace so finished shall be flooded with water for a

minimum period of two weeks for curing and for final test. All

above operations to be down in order and as directed and

specified by the engineer-in-charge. With average thickness of

120 mm and minimum thickness at khurra as 65 mm. (Cement

consumption 0.511 Bags / S.M.)

Total amount of Plumbing & Sanitation ( C )

Total amount of Plumbing & Sanitation ( C )

(D) INTERNAL ELECTRIFICATION OF ENTRANCE

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multistrand copper wires, in following type of pipe to be

erected Open/ concealed in/ on surface on wall/ceiling

complete with 6A Modular type switch / bell push & accessories

and earth continuity of following type, erected on PVC / Metallic

box, single mounting base frame covered with textured/metallic

front plate modules erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder/ ceiling rose /

H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories - Cat III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multistrand copper wires, in following type of pipe to be erected

Open/ concealed in / flushed on wall/ceiling complete with 6A

Modular type switch and hum free EME four or more step type

electronic fan regulator with separately mounted and

accessories with earth continuity of following type erected on PVC

/ Metallic box, single mounting base frame covered with

textured/metallic front plate modules erected on / in wall / ceiling

as per pipe erected. with necessary ceiling rose / H.D.Connector

as directed. (a) with medium class Rigid PVC pipe and accessories

Point wiring for Individual Plug with & earthwire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type of to be erected

concealed in / on surface of wall / ceiling complete with Modular

type switch & 5 pin Plug erected on PVC / Metallic box covered

with appropriate front plate modules erected on / in wall / ceiling

as per pipe erected with following type of accessories. (a) with

medium class Rigid PVC pipe and accessories

3 [I] For 6A Plug with 2-1.5 sq.mm Cu. Wire Cat. III 0 444.23 Pt

4 [II] For 16A Plug with 2-2.5 sq.mm Cu. Wire Cat. III 0 668.48 Pt

Point wiring for Looped Plug with 6A Modular type switch & 5 pin

socket erected on PVC / Metallic box, single mounting base

5 frame covered with textured / metallic front plate modules 2 240.52 Pt

erected on / in wall / ceiling with following type accessories Cat.

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for

earth continuity of following size

(a) with medium class Rigid PVC pipe and accessories

6 (a) 2 wire 1.5 sq. mm 20 59.59 Mtr.

7 (b) 2 wire 2.5 sq. mm 15 78.78 Mtr.

providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm

7A copper conductor FRLS PVC insulated stranded wire of green 0 107.06 Mtr.

colour for earth continuity of following size

(A) with medium class Rigid PVC pipe and accessories

(a) 2 wire 4 sq. mm

Providing following type of Modular Type Accessories mounted

with PVC / metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate , modules

7B 2 24.24 Each

erected with necessary connections as per site situation directed

by Engineer In charge.

(7) Blank Plate Single Cat. III

B LT Switchgear, Distribution Boards & LT Panel

Miniature circuit breaker single pole 6A to 25A suitable to operate

on 240 V A.C. system and having breaking capacity 10 KA to be

erected in existing box. confirming to IS 8828/1996 with ISI Mark

providing and erecting Miniature circuit breaker single pole 0.5A to

2A system and having breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with ISI Mark (for each

Providing & erecting 240 V MCB double pole switch for motor &

9 inductive load (C Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following capacity

(B) 40 Amp. Cat.III 1 329.53 Ea.

Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, confirming to IS 13032 and BS

5486-1986 without MCB to house appropriate nos. of MCBs.(The

DBs should be used of same company of MCB to be used)

10 (D) Single phase 6way SS Double door 1 885.77 Ea.

Approved make ELCBs / RCCBs conforming to IS: 12640 and

having sensitivity of 30 mA and Short Circuit withstand capacity of

6 KA and suitable for operation on 3 phase and neutral 415V.

having characteristic of quick action & tripping with all advance

feature & do not incorporate any electronic component for

following Max. rating erected as directed.

(i) 25 Amps.DP Cat III. 1 1968.64 Ea.

Providing& fixing G.P. L-Slotted Angle (3" Gap, 16 Gauge ) and M.S

L-Type Patti Bracket With PVC Coated (8mm) Nut-Bolts (with

wiser) and 3" Khila on wall at Levels of approved design including

the cost of cutting, drilling holes & make good the wall etc

coplete-For Meter Fitting Arrangement of Single/Three Phase

Meterbox (with MCB) as per site requriment.

C Indoor Lighting & Fan Item.

SITC of IP65 Surface / suspension mounted waterproof luminaire,

Polycarbonate housing and linear prismatic ribbed cover

providing excellent distribution of light, Convenient Polycarbonate

fastening clips and hinged diffuser to make it easy to replace

lamps, Press fit CRCA gear for ease of maintenance. complete

with tube holders, lead wire and connections. with wall/Ceiling

13 Mounting Clamp. (Min Two Clamp for tube Luminary) and with 1 0 2340.00 Ea.

LED Tube 2100 Lumen

Make : , Crompton, Philips,Havells,Bajaj (To be used for

ceiling Mounting).

Contractor Has to submit NABL approved Laboratory Test

certificate of model to be offered for confirmation of above

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used

as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high

U.V. & corrosion resistance with diffuser housed in aluminium

casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)

(A) Tube Light with integral driver

(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet

Supplying and erecting led lamps with following wattage

capacity of 220 to 240 voltage, minimum 15000 burning hours life,

13B 500 V in built-surge protection,Polycarbonate diffuser, mounting

suitable for E14 / E27 / B22 lamp holders, pf >=

(ii) 5 to 8 watts

Fans & Related Item

Providing and erecting Approved make Power Saving / High

Speed Max. 50 Watt Ceiling fan with double ball bearing ISI mark

with condenser A.C. 23OV.50 c/s.1200 mm. sweep complete

having 3 blades with aluminium blades with canopy and 30 cms.

down rod erected on existing hook or clamp with 24/0.2 , 3 core

flexible wire with earthing.

Supplying & erecting fan hook box of 10 mm M.S. round bar

bounded to the RCC bars up to 50mm length each side and

pierced through a 16 Gauge M.S. box / Heavy Duty PVC box

complete erected concealed in Ceiling with necessary finishing.

Supplying & erecting single phase approved make industrial

exhaust fan suitable for medium duty ring mounted low noise

operation suitable for medium duty having following dia size and

maximum speed in RPM [A] 305 mm dia 900 RPM Cat II

380 mm dia and 1400 RPM. Cat.II 2 3081.36 Ea.

450 mm dia and 1400 RPM. Cat.II 0 3937.29 Ea.

D Earthing System

Providing and erecting HOT deep Galvanized iron strip wire 8 to

Supplying and erecting eartn pit of minimum bore dia. 150 mm.

size, approved make Safe Earthing Electrode, consisting of pipe-in-

pipe trechnology as per IS 3043-1987, made of corrosion free g. i.

pipes, having outer dia. of 50 mm., having 80-200 micron

galvanizing, inner pipe dia. of 25 mm., having 200-250 micron

15 galvanizing, connection terminal dia. of 12 mm., with constant 1 8634.64 Ea

ohmic value, surrounded by highly conductive compound with

high charge dissipation, suitable for the following type of

-Length of Pipe : 3 Mtrs.

-Back filling Compound :2 nos Bags of 25 Kg.

Total amount of Internal Electrification of Entrance ( D )

Total amount of Internal Electrification of Entrance ( D )

Total amount of Part - 1B Entrance

Total amount of Part - 1B Entrance

Total amount of Part - 1B Entrance for 2 nos.

Total amount of Part - 1B Entrance for 2 nos.

Total amount of Part -1 Area Development Work

Total amount of Part -1 Area Development Work

Part - 2 Horticulture Work

LAWN : Area cleaning and side grading, removing unwanted

materials, plants, chrubs, wild grass, weeds, debris, rubbish, etc.

Excavating up to depth 30 C.M surface dressing leveling, making

slopes for drainage according to landscape, Disposal of

unwanted materials with all labour and tools. Development of

lawn including preparation of bed ground, spreading and mixing

1 the good soil with Farm Yard Manure, Gypsum, fertilizer soil with 1500.00 90.00 S.M.

farm Yard Manure, Gypsum, Fertilizer bas required hand specified.

Planting of lawn grass bits roots of approved quality, watering and

specified. Planting of lawn grass bits roots of approved quality,

watering, and specified. Planting of lawn grass watering mowing,

Catagory :- Selection - I type

Supplying on site plants with following specifications .

Plantation development works include weeding,cleaning,

removal of unwanted materials,preparation of pits,supporting

bamboo sticks as per specifications,planting & stacking,

watering,with all labor tools and tackles etc.

Plants would be in good condition and of specified height. The

rates would be inclusive of all taxes, sales tax, Octroi,transportaion

etc. complete F.O.R. site. Conditions of plant would be verified at

the time of selction as well delivery. All complete and as per

instructions of the Engineer-in-charge as Selection By Architect.

(Height from 3m to 4 m, Girth Size: 75mm to 100mm,Bag Size: 25'' * 480.00 1000.00 Nos.

(Height from 1.2 m to 2.5m ,Bag Size: 15'' * 15''/ 12'' * 12'' - or more)

(Height from 3m to 4 m, Girth Size: 75mm to 100mm,Bag Size: 25'' * 70.00 1500.00 Nos.

Trees - (Height of plants - 8' to 10' & Bag Size of plants - 18" x 18" 120.00 150.00 Nos

Shrubs - (Height of plants - 1'6" to 2' & Bag Size of plants - 6" x 8" 1000.00 15.00 Nos

Border/ Hedge plants - (Height of plants - 6” to 1’ & Bag Size of

plants - 5" x 7"

House/Creepers / Water Plants - (Height of plants - 1' to 2' & Bag

Size of plants - 6" x 8"

Yallow Bamboo Plants - (Height of plants - 3' & Bag Size of plants -

Green Bamboo Plants - (Height of plants - 2' to 3' & Bag Size of

plants - 6" x 8"

Budh Bamboo Plants - (Height of plants - 3' & Bag Size of plants -

Ixora Dufy - (Height of plants - 2' & Bag Size of plants - 15" x 15" 0.00 50.00 Nos -

Foxtail / Royal palm/ Big Avenue tree - (Height of plants - 10'-12' &

Bag Size of plants - 21" x 21"

Palms (mixed) - (Height of plants - 4' & Bag Size of plants - 18" x 18" 0.00 400.00 Nos -

Conocorpus topiary tree plants - (Height of plants -3' to 4' & Bag

Size of plants - 6" x 8"

Lawn (selection - 1) or Passpallum lawn 0.00 120.00 guny bag -

Korean Carpet Lawn 0.00 9.00 Sq.Ft. -

Supplying,stacking and spreading of goodquality organic as well

inorganic manures and fertilizers and necessary soil conditioners

ang amendments.

(a) Neem cake 7750.00 7.00 Kg.

(b) Castor cake 380.00 6.00 Kg.

(d) Vermicompost 6620.00 4.00 Kg.

(e) D.A.P.fertilizer 670.00 29.00 Kg.

(f) Cow Urine 30.00 500.00 Lit.

(f) Gypsum 1100.00 5.00 Kg.

3 (h) Carbofuran 3G 160.00 120.00 Kg.

(i) Imidacloprid 17.6 SL (Antitermite treatment) 20.00 2300.00 Lit.

(j) Organic mix fertilizer 770.00 8.00 Kg.

(k) Cocopeat@ 5KG /Sqm, Providing & mixing of cocopeat in

specified ratio having Ph 6.5-7.5. Cocopeat supplied at site should

have max moisture content of 25% by weight, free from foul odour

and any other foreign material.

(l)Termite control granules: Chloropyriphos 10% 150.00 125.00 kg

(m)Trichoderma culture 750.00 250.00 kg

(n)Silicon based spreading agent 30.00 1200.00 Lit

(o)Humic acid 150.00 200.00 kg

Providing of decorative pots with all labour etc. comp.As Per

Architect Suggesion & Insutructuins & Drawings.

Supplying &TOP SOIL: Supplying and spreading in position 300 mm

thk layer of good approved red sieved soil mixed with organic

fertiliser including levelling, watering, consolidation by manually or

mechanically (which ever convenient at site) at every 50mm thik

5 layers, cost including of all materials, labour and other charges 1893.00 368.00 Cu.mt

required to complete and as directed by the Engineer In charge

filling of good quality garden soil(free from inert material) suitable

for healthy growth of plants, in layers of 20 cm. Th'. Incl. watering,

ramming & consolidation etc. complete.

Supplying and stacking of well rotten Farm yard manure (FYM) at

6 site,including royalty and carriage for all leads. (Manure measured 50.00 350.00 Cu.mt

in stacks will be reduced by 8% for payment)

Development & Maintainance of Tree and Palms including

loosening soil,regular watering,weeding,regular trimming/training

with all labour,removal of unwanted materials, required fertilizer,

tools and tackles etc. for a period of 12 months

Development & Maintainance of shrubs and Climber including

loosening soil,regular watering,weeding,regular trimming/training

with all labour,removal of unwanted materials, required fertilizer,

tools and tackles etc. for a period of 12 months

Development & Maintainance of Creeper, Ground Cover and

Lawn including loosening soil,regular watering,weeding,regular

trimming/training with all labour,removal of unwanted materials,

required fertilizer, tools and tackles etc. for a period of 12 months

Removal of unwanted vegitation, cleaning of site and disposal of

the materials at suggested site

Floating Island: Providing and fixing of 2.40 MT side each, Bamboo

floating Module tied with each other and fixing in proper line as

11 per design including 40mm dia of pvc pipes, Nylon Rope, HDPE 12.00 16700.00 nos.

plastic mono shade all complete and as directed by engineer in

Total amount of Horticulture Work

Total amount of Horticulture Work

Part - 3 Recharging Borewell (including Maintance up to defect Liability period)

Drilling 300mm Diameter bore in all types of starta up to any

Depth including cost of bentonite powder carting rings etc.

1 complete the drilling shall be done by mud flushed rotary 41.18 600.00 R.M.

equipments; bore holes should withstand at least till period of

Supplying best Quality of well- sorted " SEVALIA "pea gravel having

size 4mm to 6 mm at site (Market rate)

Providing and fitting bail plug having length 0.45mtr. from M.S

medium class pipe as per ISI for 200 mm diameter pipe.

Development of each water bearing zone come across up to the

depth of tube well (size 250 mm diameter & depth more then 150 JOB

ft.) by lowering 100 mm diameter drop line and 32 mm diameter WORK.

GI air line for each Zone with air compressor of capacity not less.

Providing & Fixing MS Clamps with threaded of standard make

suitable for ERW pipes.

(a) For 200 mm Diameter ERW blank pipe with size 750 x 75mm x

10mm thick suitable for 200mm diameter.

Excavation and getting out for foundation up to a depth of

2.50mt in and all kinds of soil including leveling and ramming the

(a) 0.00 to mt. and foundation pits, shoring, strutting,

Depth 7.92 123.22 C.M

(b) 1.50 mt to 3.00 mt. Depth 7.92 136.35 C.M

Providing and laying Cement Concrete M-100 grade 1:3:6 (1

cement: 3 coarse sand : 6 hand brocken stone aggregate 20mm

7 nominal size ) and curing complete excluding cost of form work in 0.62 2510.86 C.M

chamber P.C.C(without forms work) work complete. .( S.O.R.-2015-

Providing & laying Fly ash Brick masonary having crushing strength

not less then 70kg/sq.cm. 1:6 (1 cement : 6 fine sand) with

scaffolding, watering, curing etc. complete with all labours and

materials.various area as directed by incharge .

Providing 10mm thick Cement Plaster in single coat on

brick/concrete walls far interior plastering up to Floor two level

and finished even and smooth in cement morter 1:3(1 cement

sand various area as directed by incharge) .

Providing, fixing M.S Jali frammed work (three piece with handle

fitting) on Opening portion Precast Module Structure for

Prevention of Recharge bore well structure,size including framme,

heavy required Angle (40 x 40 x 6mm), flat pati (25 x 6mm),cuttin

Providing & Supplying 200mm dia mater 1.5mm L.C.G (Low Carbon

Galvanise) 'V' wire screen pipe of Johnson or approved make ISI

including lowering, fixing, jointing in bore hole as per aquifer depth

and pipe assembly given as per site condition Soil stat

Providing, Supplying, Fixing in bore hole 6Kg/cm2 P.V.C Pipe of

approved Quality (Prince,Suprem,Finolex) with ISI mark including

nesessary fittings and providing as per site sitution and directed by

Engineer –in- charge. ( 200 mm ( 8'') dia

Providing, Supplying, Fixing P.V.C. 6 Kg/Cm2 Pipe IS stanadard for

down take / inlet from Bldg./ Structure to Sand filter Chamber,

including piping/ plumbing, fitting, wall clamping, necessary

13 excavation and filling etc. complete as per site situation

(a) 110mm Dia.,6 Kg/Cm P.V.C. pipe. 3.50 227.00 Rmt.

(b) 160mm Dia., 6 Kg/Cm P.V.C. pipe. 10.00 449.00 Rmt.

Providing, supplying, fixing and installing M 300 Grade. precast

size 1.5 dia x 2.35 mt. height ,top 75mm thick in 2 half pieces Sand

Filteration chamber (2 layer Type of Precast module )as per

Design, Drawing.including necessary excavation, filling, dr

(a) 1 layer type of Precast module 0.00 18500.00 NO

(b) 2 layer Type of Precast module 1.00 25000.00 NO

Proving & fixing in position Johnson make and equivalent ... 'V' wire

L.C.G screen pipe 1.00 mm size of filter assembly of pair –ID

mm & OD 217.50 mm of 0.5 mm slot size and ID 416 mm and OD

428 mm of 1.00mm slot size as pe

(a) 1.0 mt. length. 0 7500.00 SET

(b) 2.0 mt. Length. 1.00 14000.00 SET

Borehole Video photography all the fresh new fresh new bores or

16 few selected as desired for better understanding & clarity of work 1.00 4000.00 JOB

undertaken as directed by Engineer -in-charge.

Supplying water tankers for constant water supply at tube well

Compressor work and cleaning of work site after completion of

entire job (testing) inluding cleaning of mud etc.Location as

directed by Engineer-in-charge.

Providing and Fixing Recharge Borewell name boards as per

standard I.R.C type design of steel plate including painting

lettering etc. complete with fixing in C.C 1:4:8 block with

necessary excavation.

Soil Investigation Test report from Govt.approved authorised

laboratary (Prior inserting bore Pipe) of each bore shall be

19 1.00 6000.00 Each Bore

submitted by Contractor and soil sample of various starta shall be

first collected in Polythene bag and than submitted in transparent

Removal of surplus excavated earth of excavated mud-pits and

20 water harvesting chambers up to the lead of 5.0 km as per the 3.60 65.00 C.M

instruction of Engineer In Charge

21 Frame 1.00 1600.00 Nos.

Amount of 1 No. Recharging Borewell

Total Amount of 10 Nos. Recharging Borewell

Total Amount of 10 Nos. Recharging Borewell

Part - 4 Irrigation Work

Providing & Fixing P.V.C. pipes (SCH-80) of Prince/ Supreme/ Jain/

Astral/ Tulsi/Finolex make for water supply line at all floor levels

incl. fixtures like bends, tees, shoe etc joined with resin of

approved brand & manufacture etc. comp. Pipe shall be fixed on

the wall the help of clamp at every two meter C/C or shall be

concealed as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

1 solvent, including cost of all materials.

50 mm dia 40.00 510.00 Rmt

Providing and fixing approved quality, UPVC Sch 80 piping

confirming to ASTM F441, for supplies, approved make, including

jointing with upvc solvent cement and ensuring airtight joints, with

necessary specials, couplers, unions, elbow, equal tees, tail piece,

adapter (both male and female), reducer (single stage, double

stage and triple stage), end cap, fabricated bend, etc., including

all required trenching, refilling, in layers, ramming & consolidation,

removing away the surplus earth & spoils, dumping it on site or

carting away to lead of 100 meters as directed incl.. complete of

the following nominal diameter (NB) size:

Providing & Fixing P.V.C. Stop Valve Tulsi/Finolex make formake

for water supply line at all floor levels incl. fixtures and joints and

fixing the same with adhesive solvent, including cost of all

15 mm dia 5.00 150.00 Rmt

25 mm dia 25.00 225.00 Rmt

40 mm dia 20.00 380.00 Rmt

50 mm dia 5.00 570.00 Rmt

65 mm dia 10.00 855.00 Rmt

Providing & Fixing abonite ball cock of approved qualities

4 directed etc.comp. 5.00 101.89 Nos.

(A) 25 mm. dia.

(B) 50mm dia. 5.00 136.52 Nos.

non return Valve

Providing & Fixing gun metal check or non return full way wheel

valve at all floors levels, etc. complete.

Providing and fixing screw down bib taps of following size.(A) Brass

screw down bib tap polished bright. (i) 15mm dia. 1.00 184.98 Nos.

Providing, fixing, jointing and testing, heavy quality brass ball valve

with PN1.6 Rating of approved make, including flanges / unions,

nuts, bolts, washers, etc. complete, as approved by the Architect

and Engineer-in-charge for water supply lines of the following

nominal bore (NB) size:

Providing, fixing, jointing and testing, heavy quality CI butterfly

valve screwed with PN1.6 Rating rubber gasket, flanges / unions,

nuts, bolts, washers, etc. complete, as approved by the Architect

and Engineer-in-charge for water supply lines of the following

nominal bore (NB) size:

Providing, fixing, jointing and testing, heavy quality C.I non return

valves or Dual Plate check valve scewed with PN1.6 rating

confirming to IS 778, with screwed / flanged ends, of approved

make, on water supply lines of the following nominal bore (NB)

Providing & fixing Dripper or Emmiter for irrigation as per directed

by engg. and Architect/Consultant Instruction & Suggestions 174.00 20.00 Nos.

Rubber Hose pipe

11 Providing and supplying of 20 mm (3/4") dia Rubber Hose pipe

Providing & Fixing of sprinkler specification Radius: 10' to 20',Flow

rate: 3.8 to 31.5 GPM,Recommended pressure range:40 to

12 PSI,Operating pressure range: 40 to 100 PSI,Precipitation rates: 0.4 1.00 3850.00 Nos

in/hr approx.,Nozzle trajectory: 25 degrees type All Labour Profit

Providing & erecting open well horizontal mono block pump set

with cast iron body, complete for three phase submersible motor

having[E] For 7.5 HP 3 phase open well horizontal mono block 1.00 25987.30 SET

pump set suitable for 1550 LPM to 370 LPM @ 13.5 Mtr to 42 Mtr

head suitable for 65/75 mm dia delivery pipe[Cat.III]

Supplying & erecting approved make self-priming domestic

monoblock water pump with 1.5 H.P motor, suitable for operation

14 on 230 volts, 50c/s. AC supply with metallic flange, and M.S. 1.00 9314.22 SET

impeller delivery and following discharge 44 LPM at 32 Mtr head

suitable 25 mm dia delivery[Cat.III]

Supplying and erecting Direct-on-line, Starter with 15A.rating

contractor and with 4-14A. range, directly operated thermal

15 overload relay in sheet steel enclosure for 3phase 415V.50 c/s. 1.00 2046.26 Nos

A.C. motor up to 7.5 H.P.complete erected on P.W. Block with

necessary connection. [Cat.III]

Supplying & erecting approved make Timer System Make Electro

power Automatic liquid level controller 6A. with Magnet sensor

16 testing as per instruction of Engineer in charge on site complete 1.00 12000.00 Nos

with wiring connection with existing wires , with copper conductor

from pump to upper and lower tank.

Supplying, & erecting C.I. swing, check type non-return (Reflux)

Valve -ISI marked suitable for following size.

18 Providing and fixing of Pressure Release Valve 1.00 14500.00 Nos

Total Amount of Irrigation Work

Total Amount of Irrigation Work

Part - 5 Compound wall

Boring holes 3.5 m deep in ordinary soil (for cast in situ piles) and

1 getting out the soil and disposal of the surplus excavated soil as

directed within a lead of 50 Meter for following diameter of pipes.

loose or soft soil

for 250 mm dia 0.00 326.84 R.M

for 300 mm dia 382.00 391.74 R.M

Excavation for foundation including sorting out and stacking off

2 useful materials and disposing of the excavated stuff up to 50 mt.

lead and all lift, watering etc.comp.

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 Crushed

3 stone agg 20m.m Nominal size)&curing comp. incl. cost of form

work in :(a) foundation & Plinth

(A) Foundation and plinth 103.00 3005.76 C.M.

Providing & laying cement concrete 1:1.5:3 (1 cement:1.5 sand:3

graded stone agg. 20 mm nominal size)& curing comp.

Includ.cost of form work but exclu. Cost of reinforcement for

reinforced concrete work in :

(A) foundation, footing, base of columns and mass concrete 189.00 4146.15 C.M.

Providing & laying cement concrete 1:1.5:3 (1 cement:1.5 sand:3

graded stone agg. 20 mm nominal size)& curing comp.

Includ.cost of form work but exclu. Cost of reinforcement for

reinforced concrete work in :

(1) Having c/s area up to 0.08 sq.mt. 86.00 12632.60 C.M.

( B ) Ground Beam:

(1)Having c/s area up to 0.08s.mt

upto G.L./P.L. 0.00 9102.61 C.M.

(2) Having cross sectional area 0.08 to 0.12 sq. mt .

( C ) RCC Pardi:

upto GF 0.00 10831.75 C.M.

Providing & laying C.C. 1:3:6 (1 cement : 3 sand : 6 stone agg.

6 mm nominal size) & curing complete including cost of formwork in 79.00 3982.62 C.M.

wall caps & copping.

Filling in trenches with available excavated earth in layer not

7 exceeding 20 cm in depth consolidating each deposited layer by 334.00 130.39 C.M.

ramming & watering

Providing and fixing TMT FE-500 bar reinforcement for R.C.C. work

including binding and placing in position etc. comp.

Upto G.L./P.L. 66610.00 76.21 Kg.

Providing and constructing brick work using fly ash building bricks

having crushing strength not less than 35 kg/sqcm. in foundation

and plinth in cement mortar 1:6 (1 cement :6 fine sand) etc.

Uncoursed rubble masonary with hard stone of approved quality

10 -A in foundations and plinth in cement mortar 1:6 (1 Cement :

sand) including leveling up etc. complete.

At ground floor 0.00 2500.01 C.M.

10-B Above plinth level rubble masonry

Uncoursed rubble masonary with hard stone of approved quality

in foundations and plinth in cement mortar 1:6 (1 Cement :

sand) including leveling up etc. complete. 0.00 2838.26 C.M.

Extra over Item 11 for super structure above plinth level upto floor

Providing 10mm thick cement plaster in single coat on

brick/concrete walls for interior plastering upto floor two level and

finished even and smooth in (i)Cement mortar 1:3 (1-cement:3-

(A) For wall and similar surfaces

At Ground Floor 0.00 189.79 S.M.

(B) For ceilings & soffits

At Ground Floor 0.00 214.16 S.M.

20mm thick sand faced cement plaster on walls upto height

metres above ground level consisting of 12mm thick backing coat

of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of

C.M. 1:1 (1-cement : 1-sand) etc. complete.

At Ground Floor 7492.00 330.88 S.M.

Providing 35 mm wide throating or plaster drip and moulding it to

R. C. C. chajja etc. comp.. For all floor

At Ground Floor 0.00 41.66 R.M.

14 Pro. smooth plaster patta

At Ground Floor 50.00 50.00 R.M.

Providing 20 mm deep finished groove in plaster in line and level

etc. Comp. For all Floor (M.R.)

At Ground Floor 3619.00 50.00 R.M.

Providing & applying two coats of weather shield max paint (3

coats may be required in case of darker colours.)of ICI Dulux or

Apex Ultima of Asian Paint including applying exterior acrylic

primer coat as per manufacturers specification and directions in

shade and colour approved by architects, on exterior surfaces of

the building including scaffolding, preparing the surface, watering,

curing etc. complete and as directed by the architects and

Surface Preparation :

surface is thoroughly clean, dry and free from all loose dirt, chalk,

16 grease, fungi, algae and flaking paint. This can be achieved by

brushing with a wire/ stiff coir brush, followed by water jetting if

required. Fill up all minor cracks and defects with white cement

and sand mixture in the ratio 1:3. For application on previously

painted wall, previous coatings of paint must be thoroughly

scraped off and Clean the surface thoroughly using wire brushes.

Apply a liberal coat of exterior acrylic primer and allow it to dry for

4-5 hours. Application of putty is not recommended.

Minimum 4-6 hours duration is required between each coat of

weather shield max paint

(A) For wall 7492.00 82.00 S.M

Providing and fixing of MS Box Section Steel work welded in built

up sections, framed work including cutting, hoisting, fixing in

position and applying a priming coat of red lead paint (A) in

beams & joists channels angles, tees, flats with connection plates

or angle cleats as in main & cross beams,hip & trussed purlins

connected to common raffers & the like. As per attached

drawing including necessary hardware and labour etc.complete

& instructed by in EIC & Architect.

All Floor 0.00 126.00 KG.

Steel work, welded in built up sections framed work including

cutting, hoisting, fixing in position and applying a priming coat of

red lead paint. (A)In beams and joists, channels angles Tees, flats,

with connecting plates or angle cleats as in main and cross

beams. Hip and jack rafters, purlins conneted to common rafters

Providing and fixing G.I. chain link fabric fencing pvc Coated of

required width in mesh size 50x50mm size x 10 guage thick nuts,

19 bolts, washer or G.I. pins, excluding M.S. angle etc. complete as 560.00 311.00 S.M.

per relevant IS specification & Directed by engineer in

charge.(TATA orJindal Make)

Providing and fixing and fitting TATA or Jindal make G.I. barbed

wire fencing with necessary barbed wire (12 x 14 guage, weight

20 not less than 0.14 kg. / mt.) pins, hooks, excluding M.S. angles etc. 1271.00 125.00 KG.

complete as per relevent IS specification.& directed by engineer

Providing & applying painting twocoats at all floor levels on new

steel other metal surface with Epoxy paint, brushing interior to give

an even shade incl. Claning the surface of all dirt, dust & other

foreign matter etc. comp.

Ground Floor 0.00 215.00 S.M.

Painting two coats (excluding priming coat) on new steel and

other metal surface with enamel paint, brushing, interior to give

22 an even shade including cleaning the surface an even shade

including cleanicn the surface of all dirt, dust and other foreign

Ground Floor 0.00 65.31 S.M.

White Washing with lime on wall surface to give an even shade &

surface incl. throughly brooming the surface to remove dirt, dust

mortar drops & losse scales of lime wash & other foreign matter

(B) Ceiling 0.00 13.53 S.M.

Rubble masonry pointing

24 Pointing on Uncoursed stone masonary with cement mortar 1:3 (1

cement : 3 Sand) 0.00 89.78 S.M.

(B) Ruled Pointing

Providing and fixing hot dip Concertina Coil of 610 mm. dia made

out of 2.59 mm. (12SWG) hot dip galvanized ( G.I. coating not less

than 200 gm / s.m. )th. Wire having 80 nos. of spies and 200 nos. of

clips made out of stainless steel (AISI 304) 1.5 mm thick. Dia, G.I.

25 Strips 0.5 mm. ht. (G.I coating not less than 120 gm / s.m. ) weight 1130.00 231.00 R.M.

of one coil should not be less than 15 kg etc. complete, at the top

of compound wall fixed with S.S clips and binding wires wherever

necessary etc. complete. (Note : Stretching lenght of one coil

should not be more than 9 m.)

Total amount for Compound Wall

Total amount for Compound Wall

Part - 5 Toilet Block

Excavation for foundation includ.sorting out & stacking of useful

materials & disposing of the excavated stuff upto 50 mt. Lead & all

lift, watering etc. Comp. (A) Loose or Soft soil With Machinaries

(A) loose or soft soil

Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ piles) &

disposal of the surplus excavated soil as directed within a lead of

50 M. For following diameter of piles. (2) 250 mm

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 Crushed

stone agg 20m.m Nominal size)&curing comp. incl. cost of

(A) Foundation and plinth 38.00 3005.76 C.M.

Providing & laying cement concrete 1:1.5:3 (1 cement:1.5 sand:3

graded stone agg. 20 mm nominal size)& curing comp.

4 Includ.cost of form work but exclu. Cost of reinforcement for

reinforced concrete work in :

(A) foundation, footing, base of columns and mass concrete 33.00 4146.15 C.M.

Providing & laying ordinary cement con.1:1.5:3 (1cement:1.5sand:

3 graded stone agg. 20 mm nominal size) finishing smooth curing

etc. comp. Incld. Cost of form work but excl. Cost of

reinforcement for R.C.C. Work in : Up to G.L./P.L.

(1) Having cross sectional area upto

upto G.L./P.L. 1.00 12632.60 C.M.

(2) Having cross sectional area more than 0.085 and up to 0.12 sq.

upto G.L./P.L. 8.00 11166.97 C.M.

5 (3) Having cross sectional area more than 0.12 sq. mt.

(1) Having cross sectional area upto 0.08 sm.

(2) Having cross sectional area more than 0.08 sq. mt and upto

upto G.L./P.L. 15.00 8174.41 C.M.

(3) Having cross sectional area more than 0.12 sq.mt.

( C1 ) RCC Pardi

upto G.L./P.L. 1.00 10831.75 C.M.

Providing & laying ordinary cement

con.1:2:4(1cement:2sand:4graded graded stone agg. 20 mm

nominal size) finishing smooth curing etc. comp. Incld. Cost of

form work but excl. Cost of reinforcement for R.C.C. Work in : Up

to G.L./P.L. (A) COLUMNS:

6 (1) Having cross sectional area upto

(2) Having cross sectional area more than 0.08 and up to 0.12 sq.

(3) Having cross sectional area more than 0.12 sq. mt.

Providing and fixing TMT FE-500 bar reinforcement for R.C.C. work

7 including binding and placing in position etc. comp.

Upto G.L./P.L. 8602.00 76.21 Kg.

Providing and constructing brick work using fly ash building bricks

having crushing strength not less than 35 kg/sqcm. in foundation

8 and plinth in cement mortar 1:6 (1 cement :6 fine sand) etc.

upto G.L./P.L. 14.00 4237.00 C.M.

Filling in trenches with available excavated earth in layer not

9 exceeding 20 cm in depth consolidating each deposited layer by 249.00 130.39 C.M.

ramming & watering

Filling in foundation and plinth with yellow or selected soil in layer

10 of 20 cm thickness including watering ramming and 94.00 289.06 C.M.

consolidationg etc.comp.

Providing & Applying 20mm. Th. Roller plaster on walls or similar

surfacesat all floor levels consisting of 12 mm av. Th. Backing coat

of C.M. 1:3 (1cement:3 sand) & 8 mm. th. Finishing coat of C.M. 1:1

11 (1 cement: 1 sand)apply thick cement slurry and apply roller

horizontal as well as vartical (two times ) up to good quality and

size of grain in elevation as perdirected by engineer incharge.

upto G.L./P.L. 40.00 324.00 S.M.

Total amount upto plinth (A)

Total amount upto plinth (A)

(B) WORK ABOVE PLINTH LEVEL

Providing & laying ordinary cement con.1:1.5:3(1cement:1.5sand:3

graded graded stone agg. 20 mm nominal size) finishing smooth

curing etc. comp. Incl.. Cost of form work but excl. Cost of

reinforcement for R.C.C. Work in :

(1) Having cros sectional area upto 0.085 sq. mt

Ground Floor 0.00 12632.60 C.M. -

Terrace Floor 0.00 12672.24 C.M. -

(2) Having cros sectional area more than 0.085 sq. mt and upto

Ground Floor 8.00 11166.97 C.M.

Terrace Floor 1.50 11206.61 C.M.

(3) Having cros sectional area more than 0.12 sq.mt.

Ground Floor 0.00 9201.68 C.M. -

Terrace Floor 0.00 9241.32 C.M. -

12 (1) Having cross sectional area up to 0.08 sq. mt.

Ground Floor 0.00 9102.61 C.M. -

(2) Having cross sectional area more than 0.08 sq. mt and upto

Ground Floor 10.00 8174.41 C.M.

(3) Having cross sectional area more than 0.12 sq.mt.

Ground Floor 0.00 7086.88 C.M. -

(1) Slabs having more than 8 Cm & upto 10 Cm thickness.

Ground Floor 0.00 7984.42 C.M. -

(2) Slabs having more than 10 Cm & upto 13 Cm thickness.

Ground Floor 19.00 7396.96 C.M.

(3) Slabs having more than 13 Cm thickness.

Ground Floor 0.00 6813.01 C.M. -

Ground Floor 2.00 9531.24 C.M.

Ground Floor 1.50 5512.83 C.M.

Providing & fixing TMT FE 500 Bar reinforcement for R.C.C. work

incl. bending, binding & placing in position etc.comp.

Ground Floor 5350.00 76.21 Kg

Terrace Floor 270.00 77.21 Kg

Providing & construction brick work using Fly Ash bricks having

crushing strength not less than 35 Kg./sq.cm. in foundation & plinth

14 in C.M. 1:6 (1 cement:6 sand ) etc. comp.

Ground Floor 60.00 4511.97 C.M.

Terrace Floor 6.00 4786.95 C.M.

Providing & constructing Half brick masonary in Fly Ash bricks

having crushing strength not less than 70 kg/sq.cm in c.m 1:4 (1

15 cement: 4 sand) curing etc complete.

Ground Floor 120.00 719.57 S.M.

Terrace Floor 0.00 678.86 S.M. -

Providing 10mm thick cement plaster in single coat on

brick/concrete walls for interior plastering upto floor two level and

finished even and smooth in (i)Cement mortar 1:3 (1-cement:3-

(A) for wall and similar surfaces

Ground Floor 432.00 189.79 S.M

Terrace Floor 23.00 217.93 S.M

(B) for ceilings and soffits of stairs

Ground Floor 198.00 214.60 S.M

Terrace Floor 0.00 242.74 S.M -

20mm thick sand faced cement plaster on walls upto height

metres above ground level consisting of 12mm thick backing coat

17 of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of

C.M. 1:1 (1-cement : 1-sand) etc. complete.

All Floor 285.00 330.88 S.M

Providing 35 mm wide throating or plaster drip and moulding it to

R. C. C. chajja etc. comp.. For all floor Market Rate.

Providing and applying 20mm. thick cement plaster patta of c.m.

19 1:3 ( 1cement : 3 sand ) etc. comp.

All Floors 200.00 50.00 R.M

Providing 20 mm deep finished groove in plaster in line and level

All Floor 200.00 50.00 R.M

Providing and laying polished Kota stone slab flooring over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6-coarse

sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and

21 jointed with grey cement slurry mixed with pigment to match the

shade of slab including rubbing and polishing etc. complete.

All Floor 77.00 989.45 S.M

Providing and laying polished kota stone slab 25mm thick in risers

of steps,skirting Dedo and pillars laid on 10mm thick cement

mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray

cement slury mixed with pigment to match the shade of slab

including rubbing and polishing etc. complete.

All Floor 32.00 1076.94 S.M

Providing & laying granite slab 18mm thick in flooring, treads of

steps and landing laid on bed of 20mm thick cement mortar 1:6 (1

Cement : 6 coarse sand) or lime mortar 1:1.5 laid and finished with

flush pointing in white or colour cement including rubbing and

polishing complete. (Basic Rate:- Rs.1614.0/S.M.)

Ground Floor 42.00 2410.00 S.M.

Providing & laying granite slab 18mm thick in skirting, risers of steps,

dedo and pillars laid on 10mm thick cement mortar 1:4 (1 Cement

: 4 Coarse sand) and finished with flush pointing in white or colour

cement including rubbing & polishing comp.. (Basic Rate:-

All Floor 6.00 2449.00 S.M.

Providing & laying granite slab 18mm thick in Window-Door seal

Frame Etc laid on 10mm thick cement mortar 1:4 (1 Cement :

Coarse sand) with nessary adhesive material and finished with

flush pointing in white or colour cement, including rubbing &

polishing comp.. (Basic Rate:- Rs.1200.0/S.M.)

All Floor 20.00 2026.00 S.M.

(A) Labour Charges For Half Round Edge For Granite 0.00 85.00 S.M. -

(B) Labour Charges For Quater Round Edge For Granite 0.00 51.00 S.M. -

(C ) Labour Charges For Edge Finished For Granite 149.00 43.43 S.M.

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand)

on new surface or fixing on existing flooring by adhesive material

26 including dismentaling of existing flooring and jointed with color

cement slurry including finised with flush pointing & cleaning the

surface etc. complete for antiskit

Ground Floor 58.00 1383.99 S.M

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand)

on new surface or fixing on existing flooring by adhesive material

27 including dismentaling of existing flooring and jointed with color

cement slurry including finised with flush pointing & cleaning the

surface etc. complete for light shade

Ground Floor 8.00 1040.35 S.M

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in

skrting risers of steps and dedo on 10mm thick cement plaster 1:3

(1-cement : 3-coarse sand) and jointed with white cement slurry

All Floor 260.00 1040.35 S.M

Providing and fixing FRP FRAME size 125 x 65 mm and 35 mm thick

FRP shutter with wood grain raised panneled design finish shutter

having extra reinforcement on sides & edges in Gel coat finish. The

core of the shutter & frmae is to be filed up with injected

polyurethene foam done in situ along with embedded wooden

pieces for stiffening & also taking hinges & fixtures. The whole FRP

frame & shutter is to be water proof weather proof,termite proof

&resistance to mild acid/alkali. Rates are to be inclusive of

S.S.hinges with fastener sleeve & alluminium fixtures & fastentings.

Product should have 3 years performance guarantee and

company have ISO 9001-2000 certificate.

Ground Floor 23.00 2019.98 S.M

Providing & fixing 35mm.th. Flush Door Solid Double Core type Both

Face water proof Ply Vennered & 1.5 mm th.laminate shall be

pasted on both side with adhesives as specified by the

30 manufacturers. The laminate shall be as per approved shade & 11.00 3720.00 S.M

texture, of make incl. Sal wood frames of finished size 12cm x

7cm.incl. S.S. Hinges with nessary screws & Anodized aluminum

fixtures & fastenings For all Floor

Providing and fixing window having extruded aluminum Colour

anodized section frame main outer size 63.50 x 38.10 x 1.95 mm,@

Wt 1.094 Kg / Rmt, horizontal two track member size 61.85 mm x

31.75 mm x 1.20mm @ wt.of 0.695 Kg/mt, vertical member of size

61.85 mm x 31.75mm x 1.30 mm @ wt.of 0.659 Kg/mt with sliding

shutters of horizontal member size 40mm x 18mm x 1.29mm @

wt.of 0.456Kg/mt, vertical member of size 40mm x 18mm x 1.29mm

@ wt.of 0.456Kg/mt, @ Wt. 0.457 Kg/mt with 5 mm thick

transparent bronze colour tinted float glass with powder coated

aluminum fittings and fixtures and transparent silicon sealant glass

fixing to frame as per details etc complete for window.

All Floor 6.00 2140.33 S.M

Providing and fixing standared extruded of alluminium section of

size 63mm x 38.10mm x 1.2mm , @ Wt. 0.643 Kg/mt with colour

Powder Coated alluminium frame for ventilation with 5 mm thick

frosted glass as details etc complete for Ventilation

Providing and fixing M.S. grills of required pattern to wooden

frames of windows etc. with M.S. flats at required spacings and

frame alround, square or round bars with round headed bolts and

nuts or by screws (A) Plain Grill.

Painting two coats (excluding priming coat) on new steel and

other metal surface with enamel paint, brushing, interior to give

an even shade including cleaning the surface an even shade

including cleanicn the surface of all dirt, dust and other foreign

(A) For plain grill For all Floor 21.00 65.31 SM

Wall painting (two coats) with plastic emulsion paint of approved

brand and manufacture on undecorated wall surface to give an

even shade including throughly brushing the surface free from

mortar droppings and other foreign matter and sand papered

(A) for wall and similar surfaces 455.00 79.39 S.M

(B) for ceilings and soffits 198.00 79.39 S.M

Providing & applying two coats of weather shield max paint (3

coats may be required in case of darker colours.)of ICI Dulux or

Apex Ultima of Asian Paint including applying exterior acrylic

primer coat as per manufacturers specification and directions in

shade and colour approved by architects, on exterior surfaces of

the building including scaffolding, preparing the surface, watering,

curing etc. complete and as directed by the architects and

Surface Preparation :

surface is thoroughly clean, dry and free from all loose dirt, chalk,

grease, fungi, algae and flaking paint. This can be achieved by

36 brushing with a wire/ stiff coir brush, followed by water jetting if

required. Fill up all minor cracks and defects with white cement

and sand mixture in the ratio 1:3. For application on previously

painted wall, previous coatings of paint must be thoroughly

scraped off and Clean the surface thoroughly using wire brushes.

Apply a liberal coat of exterior acrylic primer and allow it to dry for

4-5 hours. Application of putty is not recommended.

Minimum 4-6 hours duration is required between each coat of

weather shield max paint

Steel work, welded in built up sections framed work including

cutting, hoisting, fixing in position and applying a priming coat of

red lead paint. (A)In beams and joists, channels angles Tees, flats,

with connecting plates or angle cleats as in main and cross

beams. Hip and jack rafters, purlins conneted to common rafters

Providing and fixing stainless steel ( Grade 304) railing made of

Hollow tubes, channels, plates etc., including welding, grinding,

buffing, polishing and making curvature (wherever required) and

fitting the same with necessary stainless steel nuts and bolts

complete, i/c fixing the railing with necessary accessories &

38 stainless steel dash fasteners , stainless steel bolts etc., of required 108.00 450.00 Kg.

size, on the top of the floor or the side of waist slab with suitable

arrangement as per approval of Engineer-incharge, (for payment

purpose only weight of stainless steel members shall be

considered excluding fixing accessories such as nuts, bolts,

fasteners etc.).

Providing & fixing in position collapsible steel shutters with vertical

channels 20 x10 x 2 mm. Braced with flat iron diagonals 20 x5mm

size with top & bottom rails of T-iron 40x40x6mm. with 38mm dia.

steel pulleys comp. with bolts, locking arrangements, stoppers,

handles incl. applying a priming coat of Redlead paint etc.

Total amount of Above Plinth (B)

Total amount of Above Plinth (B)

(C) WATER SUPPLY AND SANITARY ITEMS

Providing and fixing water closet squatting Pan (Indian type W.C.

Pan) size 580mm (Earthwork, bed concrete, foot reste and trap to

be measured and paid for separately) (A) Vitreous China.(I) Long

pattern = White colour

Providing and fixing wsh down water closet (European type, W.C.

Pan) with integral P or S trap including jointing the trap with soil

pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and

40 cover to be measured and paid for separately)(A) vitreous China

Pattern :(i) in white colour

Make- Cera, Parry ware, HindWare- 350 x 500 x 390 mm

All floor 9.00 1303.71 No

Providing and fixing plastic seat and cover for wash down water

closer with C.P. brass hinges and rubber buffers. (B) Black plastic

seal and cover.

All floor 9.00 291.33 No

Providing and fixing washbasin with single hole for pillar tap with

C.I. or M.S. brackets painted white including sutting holes and

making good the same but excluding fittings.(A) Vitreous China:(ii)

42 Flat Back washbasin 550 mm x v 400mm size. (i) In white colour.

All floor 7.00 2059.93 No

Providing and fixing 600mm x 450mm bevelled edge mirrror of

superior glass mounted on 6mm thick A.C. sheet or plywood sheet

and fixing to wooden pluge with C.P. brass screws and washers.

All floor 7.00 833.73 No

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 75 mm

diameter with jali of the following nominal diameter of self

44 cleansing design with C.I scread down or hinged grating including

the cost of cutting and making good the walls.

All floor 20.00 558.36 No

Providing & Fixing U-PVC pipe (SWR) confirming to IS no.

(Type "B") of Prince/Supreme/Jain/Astral/Tulsi/Finolex make for soil

and waste discharge system at all floor levels incl. All fixtures like

45 bends, tees, shoe etc. jointed with resin of approved brand &

manufacture etc. comp. (M.R.)

Providing and fixing S.W. gully trap with C.I. grating brick masonry

chamber and water tight C.I. cover with frame of 300mm x

300mm size (inside) with standard weight.(i) Square mouth traps.

(A) 100mm x 100mm size P type.

Prov. & Fix. 10 cm.x15 cm.(4" x 6") S.W. trap with Inside dimension

,455 x 610 mm & 450 mm deep sewer trap chamber with 23 cm th'

B.B. masonary walls in C.M 1:5 with cement plaster 15 mm th' in

C.M. 1:3 inside & outside to exposed faces, R.C.C. top slab with

1:2:4 mix ( 1 cement: 2 Sand : 4 Grade stone aggregate 20mm

size) ,Foundation concrete 1:5:10 & fixing Precast RCC heavy duty

cover on top etc. comp. for single pipe.(A) Same as above but

precast RCC heavy duty cover instead of C.I cover

Constructing brick masonry chamber for underground C.I.

Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with frame

(Light duty) 455mm x 610mm intenal dimensions total weight of

cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.)

48 and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1- 6.00 2903.89 No

cement :2- coarse sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm thick with cement

mortar 1:3 finished smooth with a floating coat of neat cement on

walls and bed concrete etc. complete.(i) Inside dimensions

455mmx 610mm and 450mm deep for single pipe line.

Providing laying (to level or slopes) and jointing reinforced

concrete Light duty non-pressure pipes I.S. class NP2 of the

following internal diameter with collars and butt ends prepared for

collar joints including testing of joints complete.(B) 150mm

Providing and laying in trenches galvanised mild steel tubes

(Medium grade) of the following nominal bore, and tube fitting

50 (Earthwork in trenches to be measured and paid for separately)

Providing & Fixing P.V.C. pipes (SCH-80) of Prince/ Supreme/ Jain/

Astral/ Tulsi/Finolex make for water supply line at all floor levels

incl. fixtures like bends, tees, shoe etc joined with resin of

approved brand & manufacture etc. comp. Pipe shall be fixed on

the wall the help of clamp at every two meter C/C or shall be

51 concealed as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing and fixing screw down bib taps of following size.(A) Brass

screw down bib tap polished bright.

All floor 25.00 186.83 No

Providing and fixing pillar tap, capstan head, screw down high

pressure with screws, shanks and back nuts.

All floor 9.00 1423.00 No

Providing and fixing brass screw down stop tap.(A) 15mm dia.

Make- Cera, Parry ware, HindWare 13.00 1432.00 No

Providing & Fixing gun metal check or non return full way wheel

valve at all floors levels, etc. complete.

Providing and fixing Urinal or approved quality including

conecting the Urinal with waste pipe , tap etc. complete.(A) White

earthenware flat back or corner type size 430mm x 260mm x

Providing and fixing chromium plated brass half trun flush cock of

approved quality including fixing in pipe line etc. complete.(ii)

Make- Cera, Parry ware, Jaquar ,HindWare 11.00 263.77 No

Providing and fixing ball cock of approved. quality as directed.(B)

Providing & fixing U-PVC pipes Confirming to IS no. 13592 (Type "A")

of Prince/Supreme/Jain/Astral/ Tulsi/Finolex make for rain water at

59 all floor levels incl. fixtures like bends, tees, shoe etc joined with

resin of approved brand & manufacture etc. comp. (M.R.)

Providing & fixing G.I. Rain water spout of 50 mm.dia & 30 cm

All floors level 9.00 101.91 No.

Providing & fixing Z - clamps at all floor levels of approved design

to C.I. S.C.I. or PVC pipes including the cost of cutting holes &

making good the wall etc. Complete - 100 mm dia as per

61 architect instructions.

Providing & Fixing in position PVC Cowl vent to pipes of

62 Prince/Supreme/Jain/Astral/Tulsi/Finolex make etc.Comp

Providing and laying ordinary C.C. 1:1.5:3 mix for R.C.C. work

including boxing centering,vibrating, curing and mixed with

approved water proofing cement compound or "CEMWET" or

"PIDICRETE LW" intergral water proofing addmixture as water

proofing agent to be mixed with 50 kgs. cement bags shall be as

recommended by the manifacture of the water proofing material,

concrete work for top, bottom slab and side pardi for

underground tank and item inclusive necessary excavation and

refilling the available earth, 15 cm th C.C. 1:4:8 for bedding conc.,

half B.M. in C.M. 1:4 outside wall, inside pardi as per design, 10 mm

th water proffing cement plaster in C.M. 1:3 with smooth finishing,

watering etc. comp. to all inner face of tank curing etc. comp.

incl. PVC steps, outlet , inlet, over flow and wash out pipe

arrangment as necessary with M.S.Cover of 25 Kgs. with locking

arrangement fixing glazed tiles of approved make such as Orient,

Kajaria, Jhonson,Nitco,Somani ,Bell or equivalent make of

commercial quality of approved colour and size to sides and

bottom of water tankexcluding free board of 20 cm etc. as per

structural drawing excl. steel and as directed by Engr. in charge.

Under Ground water Tank 5000.00 6.50 Lit

Providing and laying white glazed tiles 6mm thick in flooring treads

of steps and landing laid on a bed of 12mm thick cement mortar

1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in white

Providing and laying white glazed tiles 6mm thick in skrting risers of

64B steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3- 14.00 887.64 SM

coarse sand) and jointed with white cement slurry

Providing erecting and fixing double coated ISI water tank of

65 required capacity each with all necessary fittings and connection 3000.00 3.95 lit

etc. complete on terrace

NOTE :- (1) The whole work is to be executed through specialized

agency with a guarantee of 10 (Ten) years given on a prescribed

proforma duly stamped (2) The rate shall include for work at all

floors & conducting water proof test as directed. (M.R.)

(A) Providing and laying water proofing treatment to vertical and

horizontal surfaces of depressed portions of W.C.,kitchen and the

like consisting of :

(a) I course of applying cement slurry @ 4.4 kg/sqm mixed with

water proofing compound conforming to IS : 2645 in

recommended proportions.

(b) II course of a layer of plaster in C.M. 1:3 with water proofing

compound confirming to IS:2645 about 25 mm. th' in the floor of

the depression & about 18mm th' On the side walls of the

depression up to the floor level, water proofing plaster about

mm. th' be continued on the walls above the floor level for a

height of 600 mm. with surface suitable to receive further

(c) Finishing top with stone aggregate 10mm to 12mm nominal

size spreading @0.008 C.M./S.M., thoroughly embedad in plaster

as per specifications & instructions of Engineer in charge (Cement

consumption 0.316 Bags / S.M.)

(B) Providing and laying integral cement based water proofing

treatment including preparation of surface as required for

treatment of roofs, balconies, terraces etc. consisting of following

operations. (a) Applying and grouting a slurry coat of neat

cement using 2.75 kg/sqm of cement admixed with proprietary

water proofing compound comforming to IS:2645 over the R.C.C.

slab including cleaning the surface before tratment.(b) Laying

cement concrete using broken bricks/brick bats 25 mm to 100 mm

size with 50% of cement mortar 1:5 (1 Cement : 5 Coarse sand)

admixed with proprietary water proofing compound conforming

to IS:2645 ,brick bats is finally covered by jointless cement plaster

20mm th. in C.M. 1:4 added with special water proofing

66.2 compound confirming to IS:2645 & top smooth finished with trowel

with false chequered marking of 300 mm.size.The treatment is

carried along the vertical surface of the parapet & other

adjoining wall up to height of about 300 mm in a shape of quarter

round vata Incl. curing etc. Comp. With average thickness of

mm and minimum thickness at khurra as 65 mm.

(c) The whole terrace so finished shall be flooded with water for a

minimum period of two weeks for curing and for final test. All

above operations to be down in order and as directed and

specified by the engineer-in-charge. With average thickness of 162.00 511.00 S.M.

120 mm and minimum thickness at khurra as 65 mm. (Cement

consumption 0.511 Bags / S.M.)

Providing and filling in depressions of Bath and W.C. At all floor

levels, after completing plumbing work of pans, pipes,traps

etc.with cinder or fly ash as directed by Engineer in charge etc.

Prov.& Fixing Health Faucet ABS Body with wall Hook and 1 Meter

68 chrome plated PVC Hose Pipe.

Make- Cera, Parry ware, Jaquar ,HindWare 11.00 971.00 nos

Total amount of Plumbing & Sanitation

Total amount of Plumbing & Sanitation

Internal Electrification of Toilet Block

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multistrand copper wires, in following type of pipe to be

erected Open/ concealed in/ on surface on wall/ceiling

complete with 6A Modular type switch / bell push & accessories

and earth continuity of following type, erected on PVC / Metallic

1 box, single mounting base frame covered with textured/metallic 15 Pt. 418.55

front plate modules erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder/ ceiling rose /

H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories - Cat III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multistrand copper wires, in following type of pipe to be erected

Open/ concealed in / flushed on wall/ceiling complete with 6A

Modular type switch and hum free EME four or more step type

electronic fan regulator with separately mounted and

accessories with earth continuity of following type erected on PVC

2 / Metallic box, single mounting base frame covered with 0 Pt. 598.30

textured/metallic front plate modules erected on / in wall / ceiling

as per pipe erected. with necessary ceiling rose / H.D.Connector

as directed. (a) with medium class Rigid PVC pipe and accessories

Point wiring for Individual Plug with & earthwire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type of to be erected

concealed in / on surface of wall / ceiling complete with Modular

type switch & 5 pin Plug erected on PVC / Metallic box covered

with appropriate front plate modules erected on / in wall / ceiling

as per pipe erected with following type of accessories. (a) with

medium class Rigid PVC pipe and accessories

3 [I] For 6A Plug with 2-1.5 sq.mm Cu. Wire Cat. III 0 Pt 444.23

4 [II] For 16A Plug with 2-2.5 sq.mm Cu. Wire Cat. III 0 Pt 668.48

Point wiring for Looped Plug with 6A Modular type switch & 5 pin

socket erected on PVC / Metallic box, single mounting base

5 frame covered with textured / metallic front plate modules 5 Pt 240.52

erected on / in wall / ceiling with following type accessories Cat.

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for

earth continuity of following size

6 (a) with medium class Rigid PVC pipe and accessories

7 (a) 2 wire 1.5 sq. mm 50 Mtr. 59.59

8 (b) 2 wire 2.5 sq. mm 30 Mtr. 78.78

providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm

9 copper conductor FRLS PVC insulated stranded wire of green 0 Mtr. 107.06

colour for earth continuity of following size

(A) with medium class Rigid PVC pipe and accessories

(a) 2 wire 4 sq. mm

Providing following type of Modular Type Accessories mounted

with PVC / metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate , modules

erected with necessary connections as per site situation directed

by Engineer In charge.

(7) Blank Plate Single Cat. III

B LT Switchgear, Distribution Boards & LT Panel

Miniature circuit breaker single pole 6A to 25A suitable to operate

on 240 V A.C. system and having breaking capacity 10 KA to be

erected in existing box. confirming to IS 8828/1996 with ISI Mark

providing and erecting Miniature circuit breaker single pole 0.5A to

2A system and having breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with ISI Mark (for each

Providing & erecting 240 V MCB double pole switch for motor &

inductive load (C Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following capacity

(B) 40 Amp. Cat.III 3 Ea. 329.53

Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, confirming to IS 13032 and BS

5486-1986 without MCB to house appropriate nos. of MCBs.(The

DBs should be used of same company of MCB to be used)

(D) Single phase 6way SS Double door 5 Ea. 885.77

Approved make ELCBs / RCCBs conforming to IS: 12640 and

having sensitivity of 30 mA and Short Circuit withstand capacity of

6 KA and suitable for operation on 3 phase and neutral 415V.

15 having characteristic of quick action & tripping with all advance

feature & do not incorporate any electronic component for

following Max. rating erected as directed.

(i) 25 Amps.DP Cat III. 3 Ea. 1968.64

Providing& fixing G.P. L-Slotted Angle (3" Gap, 16 Gauge ) and M.S

L-Type Patti Bracket With PVC Coated (8mm) Nut-Bolts (with

wiser) and 3" Khila on wall at Levels of approved design including

the cost of cutting, drilling holes & make good the wall etc

coplete-For Meter Fitting Arrangement of Single/Three Phase

Meterbox (with MCB) as per site requriment.

C Indoor Lighting & Fan Item.

SITC of IP65 Surface / suspension mounted waterproof luminaire,

Polycarbonate housing and linear prismatic ribbed cover

providing excellent distribution of light, Convenient Polycarbonate

fastening clips and hinged diffuser to make it easy to replace

lamps, Press fit CRCA gear for ease of maintenance. complete

with tube holders, lead wire and connections. with wall/Ceiling

17 Mounting Clamp. (Min Two Clamp for tube Luminary) and with 1 0 Ea. 2340.00

LED Tube 2100 Lumen

Make : , Crompton, Philips,Havells,Bajaj (To be used for

ceiling Mounting).

Contractor Has to submit NABL approved Laboratory Test

certificate of model to be offered for confirmation of above

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used

as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high

U.V. & corrosion resistance with diffuser housed in aluminium

casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

18 ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)

(A) Tube Light with integral driver

(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet

Supplying and erecting led lamps with following wattage

capacity of 220 to 240 voltage, minimum 15000 burning hours life,

500 V in built-surge protection,Polycarbonate diffuser, mounting

19 suitable for E14 / E27 / B22 lamp holders, pf >=

(ii) 5 to 8 watts

Fans & Related Item

Providing and erecting Approved make Power Saving / High

Speed Max. 50 Watt Ceiling fan with double ball bearing ISI mark

with condenser A.C. 23OV.50 c/s.1200 mm. sweep complete

having 3 blades with aluminium blades with canopy and 30 cms.

down rod erected on existing hook or clamp with 24/0.2 , 3 core

flexible wire with earthing.

Supplying & erecting fan hook box of 10 mm M.S. round bar

bounded to the RCC bars up to 50mm length each side and

pierced through a 16 Gauge M.S. box / Heavy Duty PVC box

complete erected concealed in Ceiling with necessary finishing.

Supplying & erecting single phase approved make industrial

exhaust fan suitable for medium duty ring mounted low noise

operation suitable for medium duty having following dia size and

maximum speed in RPM [A] 305 mm dia 900 RPM Cat II

380 mm dia and 1400 RPM. Cat.II 5 Ea. 3081.36

450 mm dia and 1400 RPM. Cat.II 0 Ea. 3937.29

D Earthing System

Providing and erecting HOT deep Galvanized iron strip wire 8 to

Supplying and erecting eartn pit of minimum bore dia. 150 mm.

size, approved make Safe Earthing Electrode, consisting of pipe-in-

pipe trechnology as per IS 3043-1987, made of corrosion free g. i.

pipes, having outer dia. of 50 mm., having 80-200 micron

galvanizing, inner pipe dia. of 25 mm., having 200-250 micron

24 galvanizing, connection terminal dia. of 12 mm., with constant 1 Ea 8634.64

ohmic value, surrounded by highly conductive compound with

high charge dissipation, suitable for the following type of

-Length of Pipe : 3 Mtrs.

-Back filling Compound :2 nos Bags of 25 Kg.

Total amount of Internal Electrification

Total amount of Internal Electrification

Total amount for Toilet Block

Total amount for Toilet Block

Part - 7 Composting Bed

Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ piles) &

disposal of the surplus excavated soil as directed within a lead of

1 50 M. For following diameter of piles

Excavation for foundation including sorting out and stacking of

useful materials and disposing of the excavated stuff up to 50 mt.

lead and all lift, watering etc. complete.

(A) Loose or soft soil with manual labour

(1) Upto 1.5 Mt. Depth 5.00 203.83 C. M.

Providing and laying cement concrete 1:4:8 (1 cement : 4 sand

: 8 graded stone aggregates 40 nominal size) and curing

3 complete including cost of form work in :

(A) Foundation and plinth 3.00 2680.21 C. M.

Providing & laying cement concrete 1:2:4 (1 cement : 2 sand :

graded stone agg. 20 mm nominal size) & curing comp.

4 Includ.cost of form work but exclu. Cost of reinforcement for 5.00 3637.34 C. M.

reinforced concrete work in : (A) Foundation, footing, Base of

columns and Mass concrete.

Providing and laying cement concrete 1:1.5:3 ( 1 cement,

sand, 3 graded stone aggregates 20 mm nominal size ) & curing

complete including cost of form work but excluding cost of

5 reinforcement for reinforced concrete work in:

(A) Foundation, footing, Base of columns and Mass concrete.

Providing and laying ordinary cement concrete 1:1.5:3 ( 1 cement,

1.5 sand, 3 graded stone aggregates 20 mm nominal size )

finishing smooth curing etc. complete including cost of form work

but excluding cost of reinforcement for reinforced concrete

(R.C.C.) work in: Upto G.L./P.L.

(1) Having cross section area upto 0.08 sq.mt 2.00 12632.60 C. M.

(1) Having cross section area more than 0.08 and upto 0.12 sq.mt

(2) Slabs having more than 10 cm. and upto 13 cm. thickness 0.00 7396.96 C. M.

Providing & fixing IS Mark TMT Bar FE 500 / FE 500D reinforcement

for R.C.C. work incl. bending, binding & placing in position etc. 1897.00 76.21 Kg

7 comp. Upto G.L./P.L.

Providing & construction brick work using Fly Ash bricks having

crushingstrength not less than 70 Kg./sq.cm. in foundation & plinth

in C.M. 1:6 (1 cement:6 sand ) etc. comp. Up to G.L./P.L. 8.00 4237.00 C. M.

Filling in trenches with available excavated earth in layer not

exceeding 20 cm. in depth consolidating each deposited layer by 3.00 130.39 C. M.

9 ramming and watering etc.complete.

Providing and filling in plinth with murrum/yellow soil or selected

soil in layers of 20 cm. thickness including watering, ramming and 8.00 289.06 C. M.

10 consolidation etc. complete.

Providing and applying 20mm. thick sand faced cement plaster

on walls or similar surfaces at all floor levels consisting of 12 mm.

11 average thick backing coat of C.M.1:3 (1 cement : 3 sand) and 8 62.00 330.88 S. M.

mm. Thick finishing coat of C.M.1:1 (1 cement : 1 sand) etc. comp.

Providing and applying two coats of weathershield max paint (3

coats may be required in case of darker colours) of ICI Dulux or

Apex Ultima of Asian paint including applying exterior acrylic

primer coat as per manufacturers specification and directions in

shade and colour approved by architects, on exterior surfaces of

the building including scaffolding, preparing the surface, watering,

curing etc. complete and as directed by the architects and

Surface preparation:

Surface is thoroughly clean, dry and free from all loose dirt, chalk,

grease, funfi, algae and flaking paint. This can be achieved by

brushing with a wire / stiff coir brush, followed by water jetting if

12 required. Fill up all minor cracks and defects with white cement

and sand mixture in the ratio 1:3. For application on previously

painted wall, previous coatings of paint must be thoroughly

scraped off and clean the surface thoroughly using wire brushes.

Apply a liberal coat of exterior acrylic primer and allow it to dry for

4-5 hours. application of putty is not recommended. Minimum 4-6 62.00 82.00 S. M.

hours duration is required between each coat of weather shield

Total amount for Composting Bed

Total amount for Composting Bed

Part - 8 Seating Area

(A) WORK UPTO PLINTH LEVEL

Excavation for foundation includ.sorting out & stacking of useful

1 materials & disposing of the excavated stuff upto 50 mt. Lead & all

lift, watering etc. Comp. (A) Loose or Soft soil With Machinaries

(A) loose or soft soil

( I ) 0 To 1.5 mt. Depth 85.00 117.26 CM

( II ) 1.5 To 3.0 MT Depth 32.00 129.98 CM

(III) 3.0 To 5.0 MT Depth 2.00 142.52 CM

Excavation for foundation includ.sorting out & stacking of useful

2 materials & disposing of the excavated stuff upto 50 mt. Lead & all

lift, watering etc. Comp. (A) Loose or Soft soil-With Manual Labour

(A) loose or soft soil

( I ) 0 To 1.5 mt. Depth 5.00 203.83 CM

( II ) 1.5 To 3.0 MT Depth 5.00 224.95 CM

(III) 3.0 To 5.0 MT Depth 2.00 246.06 CM

Providing Dry Rubble Soilling of various thicknessto required grade

3 including trimming of earth work hand packing the interstics with

Quarry Spalls complete for all leads and lifts.

(A) Foundation and plinth - MR 53.00 1054.26 CM

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 Crushed

4 stone agg 20m.m Nominal size)&curing comp. incl. cost of form

(A) Foundation and Plinth 33.00 3005.76 CM

Providing & laying cement concrete 1:1.5:3 (1 cement:1.5 sand:3

graded stone agg. 20 mm nominal size)& curing comp.

Includ.cost of form work but exclu. Cost of reinforcement for

reinforced concrete work in :

(A) foundation, footing, base of columns and mass concrete 66.00 4146.15 CM

Providing & laying cement concrete 1:1.5:3 (1 cement:1.5 sand:3

graded stone agg. 20 mm nominal size)& curing comp.

Includ.cost of form work but exclu. Cost of reinforcement for

reinforced concrete work in :

(1) Having cross sectional area upto

upto G.L./P.L. 0.00 12632.60 CM

(2) Having cross sectional area more than 0.08 and up to 0.12 sq.

upto G.L./P.L. 0.00 11166.97 CM

(3) Having cross sectional area more than 0.12 sq. mt.

upto G.L./P.L. 4.00 9201.68 CM

(1) Having cross sectional area upto 0.08 sm.

upto G.L./P.L. 0.00 9102.61 C.M.

(2) Having cross sectional area more than 0.08 sq. mt and upto

upto G.L./P.L. 0.00 8174.41 CM

(3) Having cross sectional area more than 0.12 sq.mt.

upto G.L./P.L. 23.00 7086.88 CM

Providing and fixing TMT FE-500 bar reinforcement for R.C.C. work

including binding and placing in position etc. comp.

Upto G.L./P.L. 8095.00 76.21 Kg.

Providing and constructing brick work using fly ash building bricks

having crushing strength not less than 35 kg/sqcm. in foundation

and plinth in cement mortar 1:6 (1 cement :6 fine sand) etc.

upto G.L./P.L. 0.00 4237.00 CM

Filling in trenches with available excavated soil incl. Watering and

9 consolidating etc. comp inclu. Spreading the available soil as per 19.00 130.39 CM

instruction of engineer in charge etc.complete.

Filling in foundation and plinth with yellow or selected soil in layer

10 of 20 cm thickness including watering ramming and 43.00 289.06 CM

consolidationg etc.comp.

20mm thick sand faced cement plaster on walls upto height

metres above ground level consisting of 12mm thick backing coat

of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of

C.M. 1:1 (1-cement : 1-sand) etc. complete.

upto G.L./P.L. 0.00 330.88 SM

Providing & applyin Decorative natural stone texture Coat

Synthetic plaster consisting of crushed natural stone chips of 0.5 to

12 4 mm size in proper gradation, bonded with Synthetic Resins,

Adhesives and various additives and applied two coats of 3 of

mm approximately.

The basic Adhesive is an Aqueous Vinyl Acetate / Acryl ate Co-

Polymer Emulsion. The Acryl ate component polymerized into the

product, imparts goods flexibility to the coating. The Co-Polymer

emulsion is combined with other Chemical Compound to give

specific properties to the final coating. These chemicals are

designed to give fungus and bacterial resistance property while in

the drum, as well as to apply Coating. They also give good

application flow properties and cohesive finish, thereby enabling

the adhesive to penetrate into the substrate before drying and

form anchor like grip. The Additives also reinforce coating, impart

water resistance and increase the life of the coating.

The specification demands that to maintain consistent quality, the

material is supplied in ready-mixed paste, packed in airtight

drums. In packed drums, the shelf life of the material will be at

least one year, if stored in cool dry place under cover.

Providing and applying of Resin Bonded. Ready Mixed Ready to

Use Decorative natural stone Textured Coating of approved

shade and color. Dry film of the average thickness of 3 mm of

mm on recommended plaster specification; to perfect line, level,

plump including finishing with sharp edge at corners, niches etc.

all as per manufacturers recommendations and specification

including all labor materials, scaffolding and surface preparation

etc. Complete as specified in drawing and as directed by the

Engineer-in-charge.

All Floor (as per approved rates for Art Centre)

upto G.L./P.L. 410.00 968.40 SMT.

Supply, Laying and washing of Hydrophobic type Factory

premixed Free Foam Stonecrete wall texture, 8 t0 10mm thick in

13 approved base colour and with selected and approved 1.00 2815 S.M.

aggregates by EIC - Including specified UV resistant WB AcrySeal

Providing 20 mm deep finished groove in plaster in line and level

etc. Comp. For all Floor (M.R.)

At Ground Floor 350.00 50.00 RMT.

Providing and Fixing of Sitting Making of controlled cement

concrete work M250 Expose with Groove and curing complete

including the cost of form work but excluding the cost of

reinforcement of reinforced concrete work.

Providing & laying River Wash Black granite slab 18mm thick in

flooring, treads of steps and landing laid on bed of 20mm thick

cement mortar 1:6 (1 Cement : 6 coarse sand) or lime mortar 1:1.5

laid and finished with flush pointing in white or colour cement

including rubbing and polishing complete. (Basic Rate:-

Rs.1614.0/S.M.) For River Wash add 100 rs (=2422+100 = 2522)

Ground Floor 80.00 2522.00 S.M.

Providing & laying granite slab 18mm thick in skirting, risers of steps,

dedo and pillars laid on 10mm thick cement mortar 1:4 (1 Cement

16 : 4 Coarse sand) and finished with flush pointing in white or colour

cement including rubbing & polishing comp. (Basic Rate:-

Rs.1347.46/S.M.) For River Wash add 100 rs (=2449+100 = 2549)

All Floor 27.00 2549.00 S.M.

17 (C ) Labour Charges For Edge Finished For Granite 343.00 70.00 RMT.

Providing and fixing of 100% Valsadi Saag wood Wooden

Floor,dedo,pargolla,seating back support using of 100% Valsadi

Saag wood Wooden Section as per architect Suggesion &

18 Drawings for floor all Wooden Section Finish with Sealer Coat 154.00 4916.00 CFT

Wood Polise as per Architect Design , drawing including

Scaffolding, necessary hardware,cutting, hoisting, fixing in position

and labour etc.complete & instructed by in EIC & Architect.

MS Box Section Steel work welded in built up sections, framed

work including cutting, hoisting, fixing in position and applying a

priming coat of red lead paint (A) in beams & joists channels

angles, tees, flats with connection plates or angle cleats as in

main & cross beams,hip & trussed purlins connected to common

raffers & the like. As per attached drawing including necessary

hardware and labour etc.complete & instructed by in EIC &

Fabrication, installation and fixing of Tensile fabric over MS

Members as per following methodology, Design, structural

analysis, detailed engineering & shop drawings as per plan area.

MS Frame : Supply, fabrication and installation in position of MS

Frame including base plate, stiffeners, pipes, with anchors as per

approved drawings. Painting : Painting with P.U. Primer and two

19A coats PU paint in approved shade on the MS Frame making it 26.00 6500.00 S.M.

completely ready to take the tensile fabric as specified Fabric:

Providing, patterning, cutting, heat welding to required shape and

Installation of the Tensile Fabric Ferrari -902 to the MS Frame with

necessary fixing accessories like GI wire, SS 304 profile laser cut

plates, SS fittings, etc. (RCC for footing and all concrete works shall

be paid separately.)

Providing & applying painting two coats at all floor levels on new

steel other metal surface with Epoxy paint, brushing interior to

give an even shade incl. cleaning the surface of all dirt, dust &

other foreign matter etc. Comp.

(A) For All Type of Steucture For all Floor 0.00 215.00 SM

Painting two coats (excluding priming coat) on new steel and

other metal surface with enamel paint, brushing, interior to give

21 an even shade including cleaning the surface an even shade

including cleanicn the surface of all dirt, dust and other foreign

Ground Floor 142.00 65.31 S.M.

Providing, supplying & placing precast RCC Woodeny benches as

per given specifications. (Seating plank dimensions : Seating

Length of the Bench : 1380 mm, Seating width of the Bench :

mm, Seating height of the Bench : 450 mm, Seating plank

thickness : 60 mm,Total height of the Bench : 900 mm.)

M-30 grade of Concrete using vibration compaction process.

Benches consists of 2 Nos. L-shape base support in wooden texture

and 1 Nos.flate back and 1 Nos. bottom plank leg thickness :90

22 mm, Leg hight : 830mm, Leg width : 600 mm, backside plank width

: 350 mm, backside plank length : 1380 mm, backside plank

thickness : 60 mm.

Bench top and back planks are treated with special anticorrosive,

water proof coating, prevent sun, rain, light and fungal attack, as

to make surfaces glossy and water proof.

The back rest should show as details given by SMC in embossed at

Total amount of Seating Area

Total amount of Seating Area

Part - 9 Activity Area Equipments & Signages

Providing & Fixing Of Two Nos Dry aad Wet S.S Decorative type

one DUSTBIN of 20 ltrs. With S.S.Support

Supply and fixing of CHILDREN PLAYING EQUIPMENTS.

COMBINATION SET 3 IN 1 As the name suggests, this item has a

combination of three items such as swing, slide and seesaw. The

complete frame of this item is fabricated from 20 NB and 25 NB

powder coated GI pipes. The slide in the combination set is made

up of Fiber reinforced plastic (FRP). The slide landing support is

made in 20 NB pipe. The slides are given a smooth finish so that

the child does not hurt itself while playing on it. The bucket swing is

made up of LLDPE and is attached to a nylon rope. For the bucket

swing a handle is given for gripping, which is made in rotational

molding and out of LLDPE. The see-saw lever and stand is made

up of 20 NB GI pipe. The see saw seat is made out of LLDPE. The

bearing used is of heavy-duty bush type.(Age Group :- 2-

yrs.,Product Area :- 2.0 m x 1.6 m,Safe Play Area :- 3.0 m x

m,Height :- 2.40m.

SPRING RIDER DUCK: The spring rider being a duck rider provides

an unlimited fun to the children riding on it. The duck is made out

from fiber reinforced plastic (FRP). The handles of duck provided

for gripping is made up of 15 NB GI pipes, whereas the duck is

made out of LLDPE in rotational molding. The duck is mounted on

heavy-duty compression spring. Also a GI flat is provided for

footrest. The spring is mounted on 5mm thick plate. And the stand

for support is made out of 40 NB pipe.(Age Group :- 3 -

yrs.,Product Area :- 1.0 m. x 0.5 m,Safe Play Area :- 2.0 m. x

m,Height :- 2.00m.)

DOLPHIN SEE-SAW:This innovative spring see saw is an exciting

product, which provides unlimited fun to the children playing on it.

The dolphin is made up of PP sheet of 12mm thick. The seating

arrangement is also made up of FRP sheet of 3mm thk. The

handles for gripping are made up of S.S material. The frame is

made from 25 x 50 x 1.6 mm thk rectangular tube. Rubber

padding is fixed at the bottom end of the tube to absorb the

2.3 ground impact. The dolphins are mounted on a pair of heavy- 4.00 32871.00 No

duty compression spring. The dia of the spring rod is 20mm. The

spring is mounted on 5mm thick plate. And the stand for support is

made out of 50MM NB powder coated GI pipes. For a good

foundation, M.S. angle of size 25 x 25 x 5 mm thk are provided.

Special end caps are used to cover the nuts bolts so that no injury

is caused to the child. (Age Group :- 3-8 yrs.,Product Area :- 0.4m x

0.75 m,Safe Play area :- 1.40 m x 2.0 ,Height :- 0.60m.)

FOUR-SEATER ARC SWING- As the name suggests, four children can

enjoy the four seater arc swing at one time. The arched shaped

side frame is made of 80 NB GI pipes and top pipe is made up of

50 NB GI pipes. The frame is powder coated to give an esthetic

look. The four swings are made up of 10 mm thick anti skid

chequered reinforced rubber top. The rubber belt seat is

suspended on 6 mm rubber coated GI chain. The ball bearings

are mounted inside a specially designed nylon clamp.(Age Group

:- 4-14 yrs.,Product Area :- 6.5 m x 1.5 m,Safe play area :- 7.5 m x

2.5 m,Height :- 2.40m)

MULTI LANE SLIDE - 2 LANES - As the name suggests, 2 riders can

slide at one time on 2 lanes - multilane slide. The slide chute is

made from 3-4 mm thick Fiber Reinforced Plastic (FRP). The sides

are smooth and curve is given to provide smooth ride to the riders.

The platform is made from Fiber Reinforced Plastic (FRP) with

suitable wooden reinforcement. The trapezium platform is

supported by 80 NB powder coated GI pipe. The railing is provided

2.7 to the platform and is made from low-density polyethylene 2.00 63000.00 No

(LLDPE), supported by 20 NB GI pipe. The ladder is made up of

NB GI pipe and having railing of 25 NB. The steps are made up of

16 SWG GI sheet folded in triangular shape with smooth edges.

The slide is supported with 'T' supports, made up of 80 NB GI pipe.

The slide entry railing is made in 20 NB GI pipe.(Rec. Age :- 4-12

years,The area :- 7.80 m x 2.20 m,Safe play area :- 8.80 m x

3.20 m , Platform Height :- 2.15 m )

MULTIACTIVITY PLAY SYSTEM -05: - Age Group : 5 to12,Area : 10 x

9.5m,Safe Area : 12m x 11.5m,Height : 1.52m. Sq. Deck 5’ ht with

canopy:The platform is made up of FRP with anti skid surface. The

top canopy is made of FRP with a minimum thickness of 2-3 mm.

The canopy is assembled from four modules.

Bowl Slide 3’ ht:The Bowl slide sliding part is made up of Fiber glass

Reinforced Plastic molded one and is of attractive color and

shade. The FRP bowl slide has minimum permissible joints suitable

for children such that child does not fall down while sliding down.

The thickness of the slide is 3 -4 mm thk. There is a suitable

handgrip on the side of the slide. The landing support is made up

of 25 NB GI pipes.

FRP Bridge 8’ Long:The FRP Bridge is made from FRP with a

thickness of 4mm. The ladder should has strength and avoids

bending. The ladder should be such that it does not have any kind

of skiddy movement.

FRP Tunnel 6’ Long:FRP Tunnel is a pipe shaped module of specific

dia made from FRP of 4mm thickness.

Swinging Bridge 8’ Long:The swinging bridge is made up of

wooden planks attached together with the help of nuts bolts and

is suspended with galvanized chains of 12mm thk. The railing is

made from roto molding process with pipe support of 20 NB GI

pipe. The frame is made up of 80 NB pipe & has a 50 x10 MS flat

welded at the ground level.

Spiral Slide 5’ ht :The spiral slide chute is made of FRP having shell

thickness of 5-6 mm. The center support of the spiral slide is made

from 100 NB GI pipe. The supports for landing are made up of

NB GI pipe. The railing is made up of LLDPE in roto molding

process. It is supported by 20 NB GI pipes. The support pipe is

powder coated to avoid rusting of the pipe.

FRP Ladder:FRP ladder is made up of FRP with a conservative

thickness of 4 mm. The ladder has reinforcement to maintain

strength and avoid bending. The top surface of the ladder should

2.8 be such that it should not deserve any kind of skiddy movement.

Rock Climber 5’ ht:The Rock climber is made up of FRP (FRP). The

rocks are moulded on same platform. The climber is supported by

25 NB pipe at the bottom for ground support.

Wave Slide 5’ ht:The Wave slide Chute with top entry module is

made up of 4 mm thick of FRP. The Wave shape should be in such

a manner that it will not give any jerk or

bump to the rider. The chute has its end such as it causes safe

landing of the child. The landing portion should be in horizontal

with respect to the ground. There should be support provided

made up of 25 NB GI pipe.

The chain climber is made from 7mm thick galvanized chain. The

foundation frame is made from 25 NB GI pipe with ‘U’ hooks

welded to it. The chain is over-hanged with a M.S. flat 50 x 10 with

the help of ‘U’ hooks. The steps are made from 20 NB GI pipes

welded to the chain for climbing.

The bubble panel is provided for all decks for safety purpose and

it is made up of LLDPE in rotomould process. It is supported by

NB GI pipes clamped to the vertical support pipe. The support

pipe is powder coated to avoid rusting of the pipe.

FRP Staircase 3’ht:

The staircase is made up of FRP with a conservative thickness of

mm. The ladder should have reinforcement to maintain strength

and avoid bending. The top surface of the ladder should be such

that it should not deserve any kind of skiddy movement.

The cross n zero enhances the tactical strength ability of the

children. The prisms of ‘X’ and ‘O’ are made out of molded plastic

while the frame is made out from LLDPE in molding process. The

prisms are fixed on powder coated GI pipe frame of 15 NB.

2.9 S Loop Climber 2.00 44137.00 No

Providing and fixing of M.S.powder Coated Open GYM

3 Equipment Design & All Section As per Architect/Consultant

Drawings,Instruction & Suggesion

CHEST PRESS DOUBLE: MADE OF 114MM ROUND PIPE AND

41MM ROUND PIPE GI JINDAL BRAND 3.5 MM WALL

THICKNESS, SKF BRANDED BALL BEARING AT MOVEMENT

POINT, MAKES IT SMOOTH, ALL POWDER COATED STUCTURE

RUST PROOF ALL HARDWARE CAPPED PROTECT FROM THE

RUST UPPER AND LOVER CAPPED.

SHOULDER PRESS DOUBLE: MADE OF 114MM ROUND PIPE AND

41MM ROUND PIPE GI JINDAL BRAND 3.5 MM WALL THICKNESS, SKF

BRANDED BALL BEARING AT MOVEMENT POINT, MAKES IT SMOOTH,

ALL POWDER COATED STUCTURE RUST PROOF ALL HARDWARE 1.00 60398.00 NO.

CAPPED PROTECT FROM THE RUST UPPER AND LOVER CAPPED.

LEG PRESS DOUBLE : MADE OF 114MM ROUND PIPE AND 41MM

ROUND PIPE GI JINDAL BRAND 3.5 MM WALL THICKNESS, SKF

BRANDED BALL BEARING AT MOVEMENT POINT, MAKES IT SMOOTH,

ALL POWDER COATED STUCTURE RUST PROOF ALL HARDWARE 1.00 49945.00 NO.

CAPPED PROTECT FROM THE RUST UPPER AND LOVER CAPPED.

CHEST PRESS WITH PULL CHAIR : MADE OF 114MM ROUND PIPE AND

41MM ROUND PIPE GI JINDAL BRAND 3.5 MM WALL THICKNESS, SKF

BRANDED BALL BEARING AT MOVEMENT POINT, MAKES IT SMOOTH,

ALL POWDER COATED STUCTURE RUST PROOF ALL HARDWARE 1.00 60398.00 NO.

CAPPED PROTECT FROM THE RUST UPPER AND LOVER CAPPED.

CROSS WALKER DOUBLE : MADE OF 114MM ROUND PIPE AND

41MM ROUND PIPE GI JINDAL BRAND 3.5 MM WALL THICKNESS, SKF

BRANDED BALL BEARING AT MOVEMENT POINT, MAKES IT SMOOTH,

ALL POWDER COATED STUCTURE RUST PROOF ALL HARDWARE 1.00 62721.00 NO.

CAPPED PROTECT FROM THE RUST UPPER AND LOVER CAPPED.

ELIPTICAL CROSS TRAINER : MADE OF 88MM ROUND PIPE AND

41MM ROUND PIPE GI JINDAL BRAND 3.5 MM WALL THICKNESS, SKF

BRANDED BALL BEARING AT MOVEMENT POINT, MAKES IT SMOOTH,

ALL POWDER COATED STUCTURE RUST PROOF ALL HARDWARE 1.00 66206.00 NO.

CAPPED PROTECT FROM THE RUST UPPER AND LOVER CAPPED.

ARMS WHEELS DOUBLE : MADE OF 114MM ROUND PIPE AND 41MM

ROUND PIPE GI JINDAL BRAND 3.5 MM WALL THICKNESS, SKF

BRANDED BALL BEARING AT MOVEMENT POINT, MAKES IT SMOOTH,

ALL POWDER COATED STUCTURE RUST PROOF ALL HARDWARE 1.00 36007.00 NO.

CAPPED PROTECT FROM THE RUST UPPER AND LOVER CAPPED.

AIR WALKER: MADE OF 88MM ROUND PIPE AND 41MM ROUND PIPE

GI JINDAL BRAND 3.5 MM WALL THICKNESS, SKF BRANDED BALL

BEARING AT MOVEMENT POINT, MAKES IT SMOOTH, ALL POWDER

COATED STUCTURE RUST PROOF ALL HARDWARE CAPPED PROTECT 1.00 45299.00 NO.

FROM THE RUST UPPER AND LOVER CAPPED.

SITTING STANDING TWISTER : MADE OF 114MM ROUND PIPE AND

41MM ROUND PIPE GI JINDAL BRAND 3.5 MM WALL THICKNESS, SKF

BRANDED BALL BEARING AT MOVEMENT POINT, MAKES IT SMOOTH,

ALL POWDER COATED STUCTURE RUST PROOF ALL HARDWARE 1.00 37517.00 NO.

CAPPED PROTECT FROM THE RUST UPPER AND LOVER CAPPED.

TRIPPLE TWISTER : MADE OF 114MM ROUND PIPE AND 41MM ROUND

PIPE GI JINDAL BRAND 3.5 MM WALL THICKNESS, SKF BRANDED BALL

BEARING AT MOVEMENT POINT, MAKES IT SMOOTH, ALL POWDER

COATED STUCTURE RUST PROOF ALL HARDWARE CAPPED PROTECT 1.00 40653.00 NO.

FROM THE RUST UPPER AND LOVER CAPPED.

BONY RIDER MADE OF 114MM ROUND PIPE AND 41MM ROUND

PIPE GI JINDAL BRAND 3.5 MM WALL THICKNESS, SKF BRANDED BALL

BEARING AT MOVEMENT POINT, MAKES IT SMOOTH, ALL POWDER

COATED STUCTURE RUST PROOF ALL HARDWARE CAPPED PROTECT 1.00 43208.00 NO.

FROM THE RUST UPPER AND LOVER CAPPED.

ROWING MACHINE : MADE OF 88MM ROUND PIPE AND 41MM

ROUND PIPE GI JINDAL BRAND 3.5 MM WALL THICKNESS, SKF

BRANDED BALL BEARING AT MOVEMENT POINT, MAKES IT SMOOTH,

ALL POWDER COATED STUCTURE RUST PROOF ALL HARDWARE 1.00 44137.00 NO.

CAPPED PROTECT FROM THE RUST UPPER AND LOVER CAPPED.

BICYCLE : MADE OF 58MM ROUND PIPE AND 41MM ROUND PIPE GI

JINDAL BRAND 3.5 MM WALL THICKNESS, SKF BRANDED BALL

BEARING AT MOVEMENT POINT, MAKES IT SMOOTH, ALL POWDER

COATED STUCTURE RUST PROOF ALL HARDWARE CAPPED PROTECT 1.00 40188.00 NO.

FROM THE RUST UPPER AND LOVER CAPPED.

SHOULDER WHEELS DOUBLE : MADE OF 114MM ROUND PIPE AND

41MM ROUND PIPE GI JINDAL BRAND 3.5 MM WALL THICKNESS, SKF

BRANDED BALL BEARING AT MOVEMENT POINT, MAKES IT SMOOTH,

ALL POWDER COATED STUCTURE RUST PROOF ALL HARDWARE 1.00 43324.00 NO.

CAPPED PROTECT FROM THE RUST UPPER AND LOVER CAPPED.

BACK MASSAGER : MADE OF 114MM ROUND PIPE AND 41MM

ROUND PIPE GI JINDAL BRAND 3.5 MM WALL THICKNESS, SKF

BRANDED BALL BEARING AT MOVEMENT POINT, MAKES IT SMOOTH,

ALL POWDER COATED STUCTURE RUST PROOF ALL HARDWARE 1.00 55752.00 NO.

CAPPED PROTECT FROM THE RUST UPPER AND LOVER CAPPED.

LEG STRETCH : MADE OF 114MM ROUND PIPE AND 41MM ROUND

PIPE GI JINDAL BRAND 3.5 MM WALL THICKNESS, SKF BRANDED BALL

BEARING AT MOVEMENT POINT, MAKES IT SMOOTH, ALL POWDER

COATED STUCTURE RUST PROOF ALL HARDWARE CAPPED PROTECT 1.00 38330.00 NO.

FROM THE RUST UPPER AND LOVER CAPPED.

Informatory sings:- Providing and fixing sing boards made out of

mm aluminium sheet; size 80 x 60 cms. Rectangle as per design of

IRC 67-1977.pre treated with phospheting process & acid etching;

coated with one coat of epoxy primer and two coats of best

quality epoxy paint; reflectorised with retro refiective sheeting as

per latest M.O.S.T. Specification; 3.1 m long stand post and frame

4 fabricated from suitable size iron agle of 35 x 35 x 3 mm,75 x 75 x 6 15.00 4099.59 NO.

mm as required;painted with best quality epoxy coating in block

and white bends.The details of symbol for each board shall be as

per the insruction of engineer in charge. The fixing at site shall be

in 1:2:4 CC block of size 45 x 45 x 60 Cms.for each leg.including

excavation,curing etc.complete under the supervision of engineer

in charge.(B)High intensity Grade.

Inauguration Plate:

(A) Computer graphic design: UV Printing on 3mm ACP composite

panel sheet (Silver colour brush finish), Matt lamination including

transportation etc.As per Architect/Consultant Drawings,

5 Instruction & Suggesion.

(B) Stainless steel takti stand: 2 or 3 inch dia S.S. pipe, 16 x 8 Inch

mm thick S.S. plate with frame size 30 x 42 inch including

fabrication and transportation work etc.As per

Architect/Consultant Drawings, Instruction & Suggesion.

Providing & Fixing of retro refectories cautionarystreet signedges

made out of 4 mm thick ACP sheet with Retro reflective latter

types 11 joint on it this ACP sheet is framed on MS frame of box

section size 38 x 38 mm medium guage welded with 38 mm x

mm flate plate as per drawing and details, supported on a

75X75X4mm Square pipe fixed to the with foundation R.C.C.

(1:1.5:3) 0.50X0.50X0.70 and Size of Column 0.45X0.45, 0.70mt

height fixing with S.S. plate as per Dimension given in drawing.

Including foundation bolt and foundation plates as per drawing

etc, as directed by engineer in charge.

Providing mandap service at garden place on Inauguration/khat

water proof mandap

(a) up to 15 ft. width. 0.00 10.00 sq.ft.

(b)from 16 to 30 ft.width 0.00 10.00 sq.ft.

( c) more then 31 ft. width. 0.00 13.00 sq.ft.

7 (2) with tadpatri

(a) up to 15 ft. width. 0.00 10.00 sq.ft.

(b)from 16 to 30 ft.width 0.00 10.00 sq.ft.

( c) more then 31 ft. width. 0.00 13.00 sq.ft.

(3) simple mandap

(a) up to 15 ft. width. 0.00 5.00 sq.ft.

(b)from 16 to 30 ft.width 0.00 7.00 sq.ft.

( c) more then 31 ft. width. 0.00 10.00 sq.ft.

Hire charges for providing, erecting, Operating and dismantling

the sound system consisting of following items duly cored with

copper core (For one day)

(a) 250W Audio Amplifier, 55A, 250W - 1 No.

(b) High performance CD/DVD player and laptop- 1 No.

(c) Horns with Units & matching transformer - 6 Nos.

(d) 15" Speaker box two way 1000 watt - 4 Nos.

(e) Microphone (shure/sennhieser) - 4Nos

8 (f) Microphone Stand DGN - 4 Nos. 0.00 13887.50

(g) Cord wire with necessary cabling .

(h) Voltage Stabilizer 3 KVA - 1 No.

(i) 12V Battery - 1 No.

(j) Cordless Microphone - 1 No.

(K) Audio mixer 8/12/16 channel- 1 No. (L)Stage monitor- 2 Nos

Total amount of Activity Area Equipments & Signages

Total amount of Activity Area Equipments & Signages

Part - 10 Stepped Seating

(A) WORK UPTO PLINTH LEVEL

Excavation for foundation includ.sorting out & stacking of useful

materials & disposing of the excavated stuff upto 50 mt. Lead & all

lift, watering etc. Comp. (A) Loose or Soft soil With Machinaries

(A) loose or soft soil

( II ) 1.5 To 3.0 MT Depth 0.00 127.14 CM -

(III) 3.0 To 5.0 MT Depth 0.00 141.11 CM -

Providing Dry Rubble Soilling of various thicknessto required grade

including trimming of earth work hand packing the interstics with

Quarry Spalls complete for all leads and lifts.

(A) Foundation and plinth - MR 444.00 1054.26 CM

Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ piles) &

disposal of the surplus excavated soil as directed within a lead of

3 50 M. For following diameter of piles.

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 Crushed

stone agg 20m.m Nominal size)&curing comp. incl. cost of

(A) Foundation and Plinth 34.00 3005.76 CM

Providing and laying cement concrete work 1:2:4 (1- Cement : 2-

Coarse sand : 4- graded stone aggregates 20 mm nominal size)

5 and curing complete excluding cost of formwork and 0.00 3637.34 CM -

reinforcement for reinforced concrete work in (A) Foundations,

footings, Base or columns and Mass concrete

Providing, mixing, placing, compacting by machine vibrator,

curing, testing M20 Design mix concrete as per IS 456:2000 (latest

6 revision) as per tender specification in all items including cost of

form work and rendering but excluding cost of reinforcement.

(A) foundation, footing, base of columns and mass concrete 222.00 5119.00 CM

Providing, mixing, placing, compacting by machine vibrator,

curing, testing M20 Design mix concrete as per IS 456:2000 (latest

revision) as per tender specification in all items including cost of

form work and rendering but excluding cost of reinforcement.

(1) Having cross sectional area upto

upto G.L./P.L. 12.00 12550.27 CM

(2) Having cross sectional area more than 0.08 and up to 0.12 sq.

upto G.L./P.L. 0.00 11099.15 CM -

7 (3) Having cross sectional area more than 0.12 sq. mt.

upto G.L./P.L. 0.00 9153.32 CM -

(1) Having cross sectional area upto 0.08 sm.

upto G.L./P.L. 13.00 8957.39 C.M.

(2) Having cross sectional area more than 0.08 sq. mt and upto

upto G.L./P.L. 37.00 8038.38 CM

(3) Having cross sectional area more than 0.12 sq.mt.

upto G.L./P.L. 26.00 6961.62 CM

upto Basement to G.L./P.L. 49.00 8191.72 CM

Providing and fixing TMT FE-500 bar reinforcement for R.C.C. work

8 including binding and placing in position etc. comp.

Upto G.L./P.L. 35365.00 76.21 Kg.

Providing and constructing brick work using fly ash building bricks

having crushing strength not less than 35 kg/sqcm. in foundation

9 and plinth in cement mortar 1:6 (1 cement :6 fine sand) etc.

upto G.L./P.L. 201.00 4237.00 CM

Filling in trenches with available excavated earth in layer not

10 exceeding 20 cm in depth consolidating each deposited layer by 222.00 130.39 CM

ramming & watering

Providing & filling in plinth with yellow soil/Good Quality Garden

11 Soil(Free From Inert Material) or selected soil in layers of 20 cm. Th'. 696.00 289.06 CM

Incl. watering, ramming & consolidation etc. complete.

Providing 10mm thick cement plaster in single coat on

brick/concrete walls for interior plastering upto floor two level and

12 finished even and smooth in (i)Cement mortar 1:3 (1-cement:3-

upto G.L./P.L. 302.00 189.79 SM

Total amount upto plinth (A)

Total amount upto plinth (A)

(B) WORK ABOVE PLINTH LEVEL

Providing, mixing, placing, compacting by machine vibrator,

curing, testing M20 Design mix concrete as per IS 456:2000 (latest

revision)and as per tender specification in all items including cost

of form work and rendering but excluding cost of reinforcement

for reinforced concrete work.

(1) Having cros sectional area upto 0.08 sq. mt

Ground Floor 0.00 12550.27 CM -

(2) Having c/s area > 0.08 & upto 0.12 sq.mt.

Ground Floor 5.00 11099.15 CM

(3) Having cros sectional area> 0.12 sq.mt.

Ground Floor 0.00 9153.32 CM -

Providing & fixing TMT FE 500 Bar reinforcement for R.C.C. work incl.

14 bending, binding & placing in position etc.comp.

Ground Floor 1000.00 76.21 Kg

Providing & laying granite slab 25-30mm thick in flooring, treads of

steps and landing skirting, risers of steps, dedo and pillars laid on 10-

20mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) and

15 finished with flush pointing in white or colour cement including

rubbing & polishing comp.

All Floor 556.00 2410.00 SM

(C ) Labour Charges For Edge Finished For Granite 565.00 43.43 RM

Providing and laying polished Kota stone slab flooring over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6-coarse

sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and

15A jointed with grey cement slurry mixed with pigment to match the

shade of slab including rubbing and polishing etc. complete.

All Floor 559.00 989.45 S.M

Providing and fixing stone work for 18-20mm thick Sand stone wall

& Top cladding over 20mm (average) thick Cement mortar of 1:4

(1Cement :4Coarse sand) including pointing with Cement mortar

1:2 (1White Cement : 2 Coarse sand) with matching pigment

,grooves and joints all complete as per drawing;including stainless

steel cramps & fastners if required for fixing the stone etc, all

complete. (Basic Rate:- Rs.650.0/S.M.)

All Floor 10.00 1420.00 S.M.

MS Box Section Steel work welded in built up sections, framed

work including cutting, hoisting, fixing in position and applying a

priming coat of red lead paint (A) in beams & joists channels

angles, tees, flats with connection plates or angle cleats as in

main & cross beams,hip & trussed purlins connected to common

raffers & the like. As per attached drawing including necessary

hardware and labour etc.complete & instructed by in EIC &

Providing & applying painting two coats at all floor levels on new

steel other metal surface with Epoxy paint, brushing interior to

18 give an even shade incl. cleaning the surface of all dirt, dust &

other foreign matter etc. Comp.

(A) For All Type of Steucture For all Floor 0.00 215.00 SM -

Painting two coats (excluding priming coat) on new steel and

other metal surface with enamel paint, brushing, interior to give

19 an even shade including cleaning the surface an even shade 842.00 65.31

including cleanicn the surface of all dirt, dust and other foreign

Total amount above plinth (B)

Total amount above plinth (B)

Total amount of Stepped Seating (A+B)

Total amount of Stepped Seating (A+B)

Part - 11 GAZEBO

(A) Construction of Gazebo

Exacavation for foundation include. Sorting out & stacking of

1 useful materaials & disposing of the excavated stuff upto 50 mt.

Lead & all lift, watering etc. Comp.

(A) Loose or soft soil

(1) Up to 1.5 Mt.depth For G. Beam 16.00 117.26 C.M

Boring holes 3.50 mt. Deep in ordinary soil ( for cast in situ piles ) &

2 disposal of the surplus excavated soil as directed within a lead of

Providing Dry Rubble Soilling of various thickness to required grade

3 including trimming of earth work hand packing the interstics with

Quarry Spalls complete for all leads and lifts.

(A) Foundation and plinth 3.00 1054.26 CM

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 Crushed

4 stone agg 20m.m Nominal size)&curing comp. incl. cost of form

A) Foundation and plinth. In side of Gazebo 6.00 3005.76 C.M

Providing & laying cement concrete 1:1.5:3 (1 cement:1.5 sand:3

graded stone agg. 20 mm nominal size)& curing comp.

5 Includ.cost of form work but exclu. Cost of reinforcement for 3.00 4146.15 C.M

reinforced concrete work in : (A) Foundation, footing, Base of

columns and Mass concrete.

Providing & laying ordinary cement con.1:1.5:3 (1cement:1.5sand:

3 graded stone agg. 20 mm nominal size) finishing smooth curing

etc. comp. Incld. Cost of form work but excl. Cost of

reinforcement for R.C.C. Work in : Up to G.L./P.L.

(1) Having c/s area up to 0.08 s.mt. Above G. Beam 0.50 12632.60 C.M

(1) Having c/s area up to 0.08 s.mt. 1.50 9102.61 C.M

Providing & Laying c.c. 1:3:6 (1 cement : 3 coarse sand : 6 crushed

7 stone aggregate 20 mm nominal size ) & curing etc. comp.

Include. Cost of form work in : Upto G.L./P.L.

Wall caps / copings 1.00 3,982.62 C.M

Providing & Fixing TMT / CRS bar reinforcement for RCC work

8 including bending, binding and placing in position comp. Upto 825.22 76.21 Kgs.

floor two level.

Providing & Const. Brick work using fly ash building brick having

crushing strength not less than 35 kg./cm in foundation and plinth

9 in C.M. 1:6 ( 1 cement, 6 fine sand ) etc. comp. 15.00 4237.00 C.M

Prov. & filling in plinth with yellow soil or selected soil in layers of

10 cm. Th. Incl. Watering , ramming & consolidation etc. comp. 7.00 289.06 C.M

Providing & applying 10 mm thick cement plaster in single coat on

brick walls & similar surfaces for plastering & finished even &

11 smooth with a floating coat of cement slurry mixed with admixture 14.00 189.79 S.M.

of lime or neeru in required proportion etc. comp. in C.M.1

Providing & applying 20 mm thick sand faced cement plaster on

walls or similar surfaces at all floor levels, consisting of 12 mm AV.

12 Th. backing coat of CM 1:3 ( 1 cement 3 sand ) & 8 mm thick 35.00 330.88 S.M.

finishing coat of CM 1:1 ( 1 cement 1 sand ) etc. Comp. All Floor

Providing & laying River Wash Black granite slab 18mm thick in

flooring, treads of steps and landing laid on bed of 20mm thick

cement mortar 1:6 (1 Cement : 6 coarse sand) or lime mortar 1:1.5

laid and finished with flush pointing in white or colour cement

including rubbing and polishing complete. (Basic Rate:-

Rs.1614.0/S.M.) For River Wash add 100 rs (=2422+100 = 2522)

Ground Floor 39.00 2522.00 S.M.

14 (C ) Labour Charges For Edge Finished For Granite 16.00 70 RMT.

Fabrication, installation and fixing of Tensile fabric over MS

Members as per following methodology, Design, structural

analysis, detailed engineering & shop drawings as per plan area.

MS Frame : Supply, fabrication and installation in position of MS

Frame including base plate, stiffeners, pipes, with anchors as per

approved drawings. Painting : Painting with P.U. Primer and two

15 coats PU paint in approved shade on the MS Frame making it 30.00 6500.00 S.M.

completely ready to take the tensile fabric as specified Fabric:

Providing, patterning, cutting, heat welding to required shape and

Installation of the Tensile Fabric Ferrari -902 to the MS Frame with