Erection & Maintenance and Labour works for Laying, testing & commissioning of 11/22 KV underground / Overhead XLPE cable (XLPE cable to be supplied by DGVCL), with cable End termination & straight through jointing kits (to be supplied by contractor) for Various feeder under jurisdiction of Dharasana subdivision under Valsad Rural Division under SI & Other Various Scheme.

Item Code Details of works Unit FY 2024-25

(A) LINE MAINTENANCE

1 9924000001 Cutting of Tree branches surounding HT/LT line

Replacement of old jumpers & providing new

2 9924000002 double jumpers with 8" binding [D Type] & No.

capsuling with PVC pipe etc

3 9924000005 Support pole for Stay PSC/STP/RSJ No.

4 9924000006 Pin binding of conductor 11/22kv Pin insulator No.

Pin binding of conductor 11/22kv Pin insulator per

pole in costle area with cleaning .

6 9924000008 Pin binding of conductor LT shakel insulator No.

Replacement of one/both disc.insulator at strain

8 9924000010 Replacement of LT shackle insulator at cut point No.

9 9924000011 Refixing of V cross Arm No.

Replacement of V cross Arm (With Transportation

11 9924000013 Refixing of Top fitting in proper position No.

12 9924000014 Replacement of Top fitting No.

13 9924000015 Replacement of LT cross Arm No.

Providing DO fuse on DP with carting &

jumpuring(ONE DO FUSE)

Numburing of pole with paint by preparing back

15 9924000017 ground of one colour and have lettering(height 3" No.

* width 0.5") using stensil

16 9924000018 Fixing of MMB(1PH.) at consumer end No.

17 9924000019 Fixing of MMB(3PH.) at consumer end No.

18 9924000020 Replacement of (1ph.) meter for Urban area No.

19 9924000021 Replacement of (1ph.) meter for Rural area No.

painting consumer no. on MMB (Urban) (with

letter size height 40mm* width 8mm)

painting consumer no. on MMB (Rural) (with

letter size height 40mm* width 8mm)

Replacement of deteriorated Single phase Service

Fixing of new dist. Box with complete wiring

including clamps,nut bolts etc.

Reparing of guarding involving reshaping of

bearer wire cross lacing binding etc.

Painting of steel fabricated material of RSJ DO DP

structure with paint

Painting of steel fabricated material of RSJ pole

26 9924000028 mounted transformer double pole structure with No.

Painting of steel fabricated material of RSJ single

pole with paint

painting of steel fabricated material of PSC Single

pole (HT line) with paint

painting of steel fabricated material of PSC DO DP

double pole with paint

painting of steel fabricated material of PSC

30 9924000032 double pole at pole mounted transformer with No.

31 9924000033 Providing line seperater single phase No.

32 9924000034 Providing line seperater three phase No.

Replacement / Providing of stay insulator along

with adjustment of tension in stay wire

Replacement of deteriorated /providing LT dist.

34 9924000036 Box with new up to 100KVA capacity & crediting No.

Replacement of deteriorated /providing LT dist.

35 9924000037 Box with new above 100KVA capacity & crediting No.

36 9924000038 Adjustment of tension in stay wire No.

37 9924000039 Refitting of LA No.

Converting pin point to Shackle point including locatio

dismentaling & restringing etc. n

replacement of 11KV Pin insulator with providing

new double pin binding

replacement of 22KV Pin insulator by new 11kv

40 9924000042 pin insulator with spares & providing new double No.

Providing 11kv double disc insulators with binding

Replacement of existing 11kv conductor (all size) Cond/K

with new double pin binding M

Plumbing of PSC Pole with straightening at pin

Plumbing of PSC Pole with straightening at

Plumbing of tilted DP structure (PSC/RSJ/STP)

with refilling of stone Murrum etc.

Providing new 11kv AB /GO switch with

46 9924000049 fabrication and insulated colour code jumper, Set

binding, lugs etc

Replacement of old 11kv AB /GO switch with

providing new insulated jumper, binding, lugs etc

Providing cage type loop guard in verticle LT line per

with using PVC reel insulators etc pole

Labour charges for replacement /providing of

49 9924000053 MMB & service with all accessories for three phase No.

Labour charges for replacement /providing of

50 9924000054 MMB & service with all accessories for single No.

phase connection

Dismentalling of existing Dist.X'mer center(RSJ

51 9924000055 /STP POLE) 25/63/100/200 KVA with all No.

fabrication & creditig the old material to store

52 9924000056 Disconnection from LT pole 1 phase No.

Reconnection from LT pole 1 phase

( payment after receipt of R/C charges)

54 9924000058 Disconnection from LT pole 3 phase No.

Reconnection from LT pole 3 phase

( payment after receipt of R/C charges)

Dismentaling & removing of service line from pole

& crediting to S/dn (1 ph.)

Dismentaling & removing of service line from pole

& crediting to S/dn (3 ph.)

Reconnection of service line complete with PVC

Reconnection of service line complete with PVC

Providing spiral type earthing by G.I. NO 8(weight

2kg -5mtr in length) with salt and coal 10kg each,

including pvc rigid pipe 20mm dia( 1.5mtr length)

to pass exposed part of G.I. wire at consumer

end with all materials, earth resistance should be

less than 2 ohms

Providing and fixing of signle core 1.5 sq mm

single strand copper insulated cable with cable

nail clip for spiral type earthing at consumer end.

The end of G.I. no 8 is to be connected by

connector with copper cable of which other end per

shall be connected to the earth terminal of meter meter

box. This item shall be used in location where

there is more distance between earth terminal

and earthing terminal of meter. (All materials

supplied by contractor)

9924000065 Stringing of LT ABC of 1*35 SQ MM + 1*25 SQ

MM including fitting of all accessories i.e. special

design suspension / tension clamp, fixing of cross

arm, LT shackle insulator etc. for fixing of

messenger wire and inclusive of dismantling

charge of existing bare conductor and crediting in

to store & dismantling of service line from LT bare

conductor and to provide service connection on

Aerial Bunch Cable by insulated piercing

connectors through service connection box

complete as required & directed by Engineer in

9924000066 Stringing of LT ABC of 3*50 SQ MM +1*25 SQ

MM+1*35 SQ MM including fitting of all

accessories i.e. special design suspension /

tension clamp, fixing of cross arm, LT shackle

insulator etc. for fixing of messenger wire and

63 inclusive of dismantling charge of existing bare

conductor and crediting in to store & dismantling

of service line from LT bare conductor and to

provide service connection on Aerial Bunch Cable

by insulated piercing connectors through service

connection box complete as required & directed

by Engineer in Charge.

9924000067 Stringing of 11KV ABC of 3*95 SQ MM +80 SQ

MM including fitting of all accessories i.e. special

design suspension / tension clamp, fixing of cross

arm, binding to pin insulator, preparing shackle

point, jumpers etc. and inclusive of dismantling

charge of existing bare conductor and crediting in

to store complete as required & directed by

Engineer in Charge.

9924000068 Stringing of 22 KV ABC OF 3*70 SQ MM +95 SQ

MM including fitting of all accessories i.e. special

design suspension / tension clamp, fixing of cross

arm, binding to pin insulator, preparing shackle

point, jumpers etc. and inclusive of dismantling

charge of existing bare conductor and crediting in

to store complete as required & directed by

Engineer in Charge

9924000069 Stringing of LT ABC of 2*50 SQ MM +1*25 SQ

MM+ 35 SQ MM including fitting of all accessories

i.e. special design suspension / tension clamp,

fixing of cross arm, LT shackle insulator etc. for

fixing of messenger wire and inclusive of

dismantling charge of existing bare conductor and

crediting in to store & dismantling of service line

from LT bare conductor and to provide service

connection on Aerial Bunch Cable by insulated

piercing connectors through service connection

box complete as required & directed by Engineer

-::- SCHEDULE – ‘B 3’: FOR Underground -::-

LABOUR RATE FOR UNDERGROUND CABLE WORK (WITHOUT GST)

Item Code Description Unit FY 2024-25

Labour charge for excavation of

cable trench of 400mm width x

1200mm depth, in any type of

soil for laying of cable of size up

to 240 mm2 (For additional

cable 200 mm additional width

shall be considered i.e. half

trench length is to be considered)

Labour charge for excavation of

cable trench of 600mm width x

1200mm depth, in any type of

soil for laying of cable of size up

to 240 mm2 (For additional

cable 200 mm additional width

shall be considered i.e. half

trench length is to be considered)

Labour charge for excavation of

cable trench of 400mm width x

1500mm depth, in any type of

soil for laying of cable of size up

to 240 mm2 (For additional

cable 200 mm additional width

shall be considered i.e. half

trench length is to be considered)

Labour charge for laying of 11kV

/ 22 kV XLPE Cable of size up to

240 mm2 & preparation of sand

layer 100mm thick, in the cable

trench & covering the cable with

150 mm dia (Inner), thickness

25 mm, 1.0 meter long RCC half

round muffs and providing and

fixing of 4inch width yellow colour

polyethylene tape with printing

"CAUTION ELECTRIC CABLE

BELOW" at 0.75 m depth from

ground surface after laying cable

in trench. This will provide

indication that electric cable is

passing underground so as to

protect cable from mechnical

injuries, refilling the same, as per

Instruction of Engineer in Charge

Labour charge for horizontal

drilling using Auger machine

without damage to surface road

at max 2.0 mtrs depth & putting

of 6.11 kg/cm2 , class-4,Green

color, 110mm O.D. , 8.5mm

thickness H.D.P.E. pipe confirms

to IS 4984-1987(3rd revision)

and BIS certification and laying

of 11KV/22KV XLPE cable of

size up to 240 mm2 in HDPE

pipe, as per Site Condition

(excluding cost of pipe). The

detail map obtained from HDD

machine and excell sheet(hard

and soft copy) indicating the

respective depth and distance

from adjacent landmark for each

segment for HDD is must

required to be submitted. HDD to

be carried out at depth 1.5 mtrs

to 2.0 mtrs as per site conditions

and as per instruction of EIC.

Labour charge for horizontal

drilling manually without

damage to surface road at max

2.0 mtrs depth & putting of

kg/cm2 , class-4,Green color,

110mm O.D. , 8.5mm thickness

H.D.P.E. pipe confirms to IS

4984-1987(3rd revision) and BIS

certification and laying of

11KV/22KV XLPE cable of size

up to 240 mm2 size, as per Site

Condition (excluding cost of

6 9925000006 pipe). The detail map and excell Meter

sheet(hard and soft copy)

indicating the respective depth

and distance from adjacent

landmark for each segment of

cable to be submitted. Drilling to

be carried out at depth Minimum

1.2 mtrs to 2.0 mtrs as per site

conditions as per instruction of

Supply of 6.11kg/cm2 , class-

4,Green color, 110mm O.D. ,

mm thickness H.D.P.E. pipe

7 9925000007 confirms to IS 4984 and BIS Meter

certification for laying of

underground 11KV / 22KV XLPE

cable up to 240 mm2 size.

Labour work for RCC concreting

on disputed location and

repairing of damage portion of

road crossing for the work

carried out for roads crossing as

well as concreting & muffing of

ploes including all materials

Providing & fixing concrete stone

route marker of 300 mm width x

150 mm thick x 650 mm height

embedded in earth at least

mm below & 350 mm above

ground level respectively at

distance approx 50 meters along

the length of cable. The RCC

concreting (1:2:4)(all necessary

maeterials will be in bidder's

scope) of route marker is to be

9 9925000009 carried out 300 mm width x 150 No.

mm thick x 300 mm below

ground level as per instruction

of EIC. The route marker should

be with name of company with

approved yellow colour-DGVCL.

The distance from marker to

cable and cable depth with

feeder name etc., marked with

arrow sign is to be painted on

it.The route marker is to be fixed

at location near to any fixed

permanent location (not

necessary to fix exact on top of

cable) as per instruction of

Erection of D.P. (double pole)

structure using 9 / 11 Mtr. RSJ

pole with cable connection

arrangement along with fitting of

10 9925000010 necessary fabrication for 11KV No.

cable including excavation of pit

& refilling of earth as per

instruction of EIC. (Exclusive of

concreting & muffing of poles)

Erection of Single pole

structure using 9 / 11 Mtr RSJ

pole with cable connection

arrangement along with fitting

ofnecessary fabrication for

11KV/22 KV cable including

excavation of pit & refilling of

earth as per instruction of EIC.

(Exclusive of concreting &

muffing of poles)

Erection of D.P. (double pole)

structure using 8.0 Mtr. PSC

pole with cable connection

arrangement along with fitting of

12 9925000012 necessary fabrication for 11KV No.

cable including excavation of pit

& refilling of earth as per

instruction of EIC. (Exclusive of

concreting & muffing of poles)

Erection of Single pole

structure using 8.0 Mtr PSC

13 9925000013 pole with cable connection No.

arrangement along with fitting

ofnecessary fabrication for

11KV/22 KV cable including

excavation of pit & refilling of

earth as per instruction of EIC.

(Exclusive of concreting &

muffing of poles)

Labour charge for erecting of

11kV / 22 kV XLPE cable of size

up to 240 mm2 on DP Structure

with fixing of 02 Nos polymer

cleats on top and middle

part.Polymer cleats, nut bolts

etc. fixing material to be provided

Providing & fixing of 6.11kg/cm2

, class-4,Green color, 110mm

O.D. , 8.5mm thickness

H.D.P.E. pipe confirms to IS

4984 and BIS certification on

the erected DP structure for the

mechanical protection of cable

by inserting the cable inside

15 9925000015 HDPE pipe. The HDPE pipe shall Per Job

be erected in such a way that

300mm shall be below the

ground level and the rest

mm shall be supported on the

DP Structure with 01 No

Polymer cleat.All materials

including polymer cleat and Nut

bolt to be provided by contractor.

Providing and fixing of pipe type

earthing from 80 mm dia class-B

GI pipe with pit to be filled with

salt & coke and construction of

16 9925000016 chamber as per DGVCL Drg. No. No.

dg /100 for DP and cable. The

earthing pit should be joined with

cable by G.I. strip of size 1” width

& 2 mm thick. All material GI

pipe, Coke, Salt etc will be

supplied by bidder.

Supply & fixing of heat shrink

type end terminations

17 9925000017 (outdoor) for upto 11kV 3C x No.

185 mm2 size XLPE cable as per

DGVCL technical specification

Supply & fixing of heat &

shrinkable end terminations

18 9925000018 (outdoor) for upto 22 kV 3C x No.

185 mm2 size XLPE cable as per

DGVCL technical specification)

Supply & fixing of heat shrink

type end terminations (indoor)

19 9925000019 for upto 11kV 3C x 185 mm2 No.

size XLPE cable as per DGVCL

technical specification)

Supply & fixing of heat &

shrinkable end terminations

20 9925000020 (indoor) for upto 22 kV 3C x No.

185 mm2 size XLPE cable as per

DGVCL technical specification

Supply & fixing of heat shrinkable

straight through joint for upto

21 9925000021 11kV 3C x 185 mm2 size XLPE No.

cableas per DGVCL technical

Supply & fixing of heat shrinkable

straight through joint type for

22 9925000022 upto 22kV 3C x 185 mm2 size No.

XLPE cable as per DGVCL

technical specification

Labour charge for excavation of

2100mm long x 1200mm wide x

1200 mm deep joint pits for

installation of 11kV / 22kV

Straight through joints as per

23 9925000023 instruction of engineer-in-charge No.

& covering the cable with

mm dia (Outer), thickness

mm, 1.0 meter long RCC half

round muffs & refilling same as

per instruction of EIC .

Providing and fixing of insulating

bus bar, made from 11KV/22KV

XLPE cable after removal of

semi conducting layer and

applying of PVC heat shrinkable

anti-tracking core insulating

tubing (1.1KV), on both end

terminal using Aluminium long

barrel heavy duty up to 240 sq

mm lugs, Aluminium bus

connector. Taping with PG-

clamp for bus conductor as per

drawing and as per instruction of

EIC. The Alluminium lugs and

PG clamp shall be covered with

11KV/22KV HT insulating

tapes.(11KV/22KV XLPE cable

will be in scope of DGVCL while

all other materials will be in

bidder's scope)

Testing of cable at various

points and commissioning the

feeder as per instruction of

engineer-in-charge.Test result

shall be submitted by contractor

Preparation and submission of

(six) copies, of complete layout

drawings with GIS mapping as

26 9925000026 per actual cable routing showing Set

road crossing, HDPE pipe

sleeving, jointing locations,

Providing and fixing of Sign

Board at junction point Made out

of 2 mm aluminium sheet size

rectangle, as per design, pre

treated with phosphate process

and acid etching coated with one

coat of epoxy primer and two

coats of best quality paints,

refloctrorised with Hi-Intensity

retro – reflective sheeting as per

the latest and frame fabricated

from suitable size iron angle. The

Sign Board is to be fixed on the

base prepared from channel and

bracing angles which is grouted

by means of cement concreting

of 1:2:4 for size of 300 mm dia x

800 mm height (500 mm to be

grouted in ground). The details to

be displayed on sign board will

be given by In-charge

Engineer.(a) Hi intensity Micro

prismatic Grade

Providing and fixing of Sign

Board (Danger Board) on

Distribution Transformer Centers

Made out of 2mm aluminium

28 9925000028 sheet size 300x300mm (1x1ft) as No.

per design, pre treated with

phosphate process and acid

etching coated with one coat of

epoxy primer and two coats of

best quality paints, refloctrorised

with Hi-Intensity retro-reflective

sheeting as per the latest and

frame fabricated from suitable

size iron angle. The Sign Board

(Danger Board is to be fixed at

the location as per instruction of

In-charge Engineer.

(a) Hi intensity Micro prismatic

Providing & fixing of aluminium

tag of size 250 mm (L) x 75 mm

(W) from 3 mm aluminium sheet

along with 1.0 mm dia aluminium

binding wire for fixing of

aluminium tag near end

29 9925000029 termination joint at DP structure No.

for identifyng the cable. The

details of feeder i.e. 11 / 22 KV

with feeder name shound be

punched on the tag by letter

punch of size 16 mm as per

instruction of In-charge Engineer.

Supply & fixing of heat shrink

type end terminations

30 9925000030 (outdoor) for 11kV 3C x 240 No.

mm2 size XLPE cable as per

DGVCL technical specification

Supply & fixing of heat &

shrinkable end terminations

31 9925000031 (outdoor) for 22 kV 3C x 240 No.

mm2 size XLPE cable as per

DGVCL technical specification)

Supply & fixing of heat shrink

type end terminations (indoor)

32 9925000032 for 11kV 3C x 240 mm2 size No.

XLPE cable as per DGVCL

technical specification)

Supply & fixing of heat &

shrinkable end terminations

33 9925000033 (indoor) for 22 kV 3C x 240 No.

mm2 size XLPE cable as per

DGVCL technical specification

Supply & fixing of heat shrinkable

straight through joint for 11kV

34 9925000034 3C x 240 mm2 size XLPE No.

cableas per DGVCL technical

Supply & fixing of heat shrinkable

straight through joint type for

35 9925000035 22kV 3C x 240 mm2 size XLPE No.

cable as per DGVCL technical

Installation, Testing and

commissioning of 11 KV,630 A

SCADA Compatible, RRL type-

3 Way RMU including Two

numbers of earthings as per

Drawing (material is in bidder's

scope) and as per DGVCL

Technical specification.

Installation, Testing and

commissioning of 11 KV,630 A

SCADA Compatible, RRLL type-

4 Way RMU including Two

numbers of earthings as per

Drawing (material is in bidder's

scope) and as per DGVCL

Technical specification.

Installation, Testing and

commissioning of 22KV,630 A

SCADA Compatible, RRL type-3

Way, RMU including Two

numbers of earthings as per

Drawing (material is in bidder's

scope) and as per DGVCL

Technical specification.

Installation, Testing and

commissioning of 22KV,630 A

SCADA Compatible, RRLL type-

4 Way, RMU including Two

numbers of earthings as per

Drawing (material is in bidder's

scope) and as per DGVCL

Technical specification.

Construction of plinth for

11KV, RRL type- 3 Way (i.e Two

numbers of Isolator & One

number of Breaker) Ring Main

40 9925000042 Unit as per DGVCL's technical No.

specification mentioned in

drawing no: Drg. 11kv-01. All

required material will be supplied

Construction of plinth for

11KV, RRLL type- 4 Way (i.e

Two numbers of Isolator & Two

number of Breaker)Ring Main

41 9925000043 Unit as per DGVCL's technical No.

specification mentioned in

drawing no:Drg. 11kv-02.All

required material will be supplied

Construction of plinth for

22KV, RRL type- 3 Way (i.e Two

numbers of Isolator & One

number of Breaker) Ring Main

42 9925000044 Unit as per DGVCL's technical No.

specification mentioned in

drawing no: Drg. 22kv-01. All

required material will be supplied

Construction of plinth for

22KV, RRLL type- 4 Way (i.e

Two numbers of Isolator & Two

number of Breaker)Ring Main

43 9925000045 Unit as per DGVCL's technical No.

specification mentioned in

drawing no:Drg. 22kv-02.All

required material will be supplied

Modifications e.g.Providing and

fixing of Terminal protectors i.e.

Re-use able boot (HT Side

11/22KV, LT Side 1.1KV)

including 11/22 KV insulating

taps and L.T.(1.1 KV) insulating

taps ,Busbar, Tapping from Bus

Bar (11/22 KV XLPE cable)

through P.G. Clamp for H.T.

Jumper to D.O. Fuse to bushings

of Transformer Center,

providing & Fixing of jumper and

providing & fixing of Heat

Shrinkable Anti Tracking Core

Insulating Tubing (Insulation

44 9925000046 Level 11/22 KV) in H.T. jumper , No.

Clamping arrangement of cable

support frame on both side of

existing Over Head type

Distribution Transformer to utilize

in Under Ground cable network

as per drawing & as per

instruction of Engineer incharge.

All live parts i.e. PG-Clamp,

connections of D.O.fuses, HT

bushings etc . shall be covered

with fixinng of 11/22 KV HT

insulating tapes. ( 11/22 KV

XLPE cable will be in scope of

DGVCL while all other materials

will be in bidder's scope ) .

Laying of any size of 11/ 22 KV Per

45 9925000047 XLPE /PILC Cable in redaymade Cable

trench or in open space Per Mtr

Labour charges for Lying of O/H

XLPE cable pole to pole

Supply of 150 mm dia (Inner),

47 9925000064 thickness 25 mm, 1.0 meter long No.

RCC half round pipe

Total of schedule B1, B2& B3

(+)_______%Above, (-)_______%Below, Rate to

Net Total of Schedule ‘B1, B2& B3:

Amount in Words: (Twenty-Five Lacks Only)

1. Whatever Steel Material removed after replacement should be credited to Store.

2. The rates are inclusive of PF & Work Contract Tax & excluding of GST.

3. Contractor has to carry out work under Dharasana Sub-Division under Valsad-

Rural Division.

4. DGVCL will provide 1ph & 3ph LT Ariel Bunch Cable 11/22kv HT ABC with necessary

accessories to the contractor.

5. The rates are inclusive of dismantling charges of existing bare conductor and

crediting in to store & dismantling of service lines from LT bare conductor and to

provide service connections on ABC by insulated pierce connectors through service

connection box.

6. The contractor has to collect all the required materials from DGVCL store as well as

credit the dismantle material to the DGVCL store at their cost.

1. DGVCL will provide key material like M.S. materials,ABC/Bare conductors,PSC/RSJ

Poles,Insulators,Fabricated materials etc. to the contractor.

2. All fabricated items shall be fabricated as per DGVCL approved drawing and by welding

rods confirming to the relevent ISI specification and as directed by Engineer in charge.

3. Necessary electricity connection for fabrictated items shall be provided by DGVCL on

payment of required charge for connection & electricity bill of the same shall be paid by the

4. All the rates are inclusive of PF and Exclusive of GST applicable time to time.

5. All steel material are to be painted as below:

(a) Scrubbing of rusted surface properly before applying the paints on to the RSJ poles &

steel fabricated materials of RSJ/PSC poles is must required.

(b) Two coats of approved ISI mark red oxide (primer) is to be properly painted for the

RSJ poles & steel fabricated materials of RSJ/PSC poles.

Two coats of approved ISI mark silver paint (i.e. triple mangoes or equivalent quality silver paint)

is to be properly painted on to the RSJ poles & steel fabricated materials of RSJ/PSC poles.

Executive Engineer (O&M)

Valsad Rural Division.