Setting up of Office for Kerala Road Fund Board Kerala Tvpm

Amount

CIVIL WORKS

12.45.1 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum plain board conforming to IS : 2095-Part 1

13.43.1 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.80 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

13.60.1 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

15.23.1 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm

11.37 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622(thickness to be specified by the manufacturer), of approved make, in all colours,shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge,in skirting, risers of steps and dados, over 12 mm thick bed of cementmortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm, including pointing in white cement mixed with pigment of matchingshade complete

22.5 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

od219423/2022_2023 Providing and fixing Open Book shelf shall be formed out of a combination of 16 mm and 8mm thick BWR/BWP Plywood with 1mm laminate and all exposed edges lipped with laminated edge banding. Inside portion of the storage shall be covered with0.8mm laminate .Rates include all materials and labour charges etc

od219547/2022_2023 Supplying and fixing Dowel Paneling with 25mm x18mm wooden dowels fixed on the wall surface Including all materials and labour charges etc.

od219627/2022_2023 Supplying and fixing full height wooden partition by covering with 8mm BWR/BWP plywood on either side of 16mm Plywood frame work and all exposed portions of the plywood shall be finished with 1mm thick Laminate of approved make and shade. Rate including all materials and labour charges etc

od219634/2022_2023 Supplying and fixing Glass partition with 6mm plain glass by covering with 9mm BWR/BWP plywood on either side of 16mm Plywood frame work and all exposed portions of the plywood shall be finished with 1mm thick Laminate of approved make and shade.Rate including all materials and labour charges etc.

od219635/2022_2023 Providing and fixing Low height storage shall be formed out of a combination of 16 mm and 8mm thick BWR/BWP Plywood with 1mm laminate and all exposed edges lipped with laminated edge banding. Inside portion of the storage shall be covered with0.8mm laminate .Rates include all materials and labour charges etc

od219701/2022_2023 Providing and fixing Door frame using a combination of 6 mm, 9 mm, 12 mm and 18 mm BWR Grade Plywood overlaid with 1mm laminate Rate shall include all material, labour charges etc

od220400/2022_2023 Providing and fixing Flush Door in position overlaid with 1mm laminate including vision panel,Tower bolt hinges etc Rate quoted shall include all material, labour charges, cost of conveyance etc

od220427/2022_2023 Supplying and fixing Door closer including all materials and labour charges etc

od219637/2022_2023 Providing and fixing all window in position Roller Blinds, including all standard fitments and fabric. Rate quoted shall include all material, labour charges, cost of conveyance etc

od220585/2022_2023 Supplying and fixing full height V panel partition Rate including all materials and labour charges etc

od220659/2022_2023 Supplying and fixing Medium size framed art prints on walls including all materials and labour charges etc

od220720/2022_2023 Supplying indoor plants including PU Pots and all materials and labour charges etc

od220849/2022_2023 Providing and fixing in place Executive Table of size 2200 mm x 750 mm x 800 mm made of a combination of BWR grade 6 mm, 12 mm and 18 mm plywood of approved quality and make; All exposed EXTERIOR portions of the plywood will be finished with 1mm thick Laminate of approved make and shade. The inside portion of the table will be finished with 0.8mm laminate. The rate will include all other necessary hardware,materials and labour charges etc

od220869/2022_2023 Providing and fixing Side Return Table of size 900 mm (l) x 400mm (w) x 650 mm (h) shall be formed out of 16 mm thick BWR Plywood with 1mm laminate and all exposed edges lipped with PVC edge banding.Inside portion of the Table will be covered with0.8mm laminate .Rates include all materials and labour charges etc

od220939/2022_2023 Providing and fixing in place Centre Table of size 900 mm x 450 mm x 450 mm The rate will include all other necessary hardware,materials and labour charges etc

od220955/2022_2023 Supplying Executive High Back net chair with hydraulic lifting mechanism and tilt lock, shodded on metal star legs with castors

od222838/2022_2023 Supplying Medium back chair with S type metal legs

od222843/2022_2023 Supplying sofa 2 Seater including all materials and labour charge etc

od222858/2022_2023 Engaging Labour for dismantling the existing partition, paneling,Texture Paint and door etc

PLUMBING WORKS

18.53.1 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore

17.7.2 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630 x 450 mm with a single 15 mm C.P. brass pillar tap

17.73.2 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighting not less than 190 gms

18.15.1 Providing and fixing brass bib cock of approved quality :15 mm nominal bore

18.16.1 Providing and fixing brass stop cock of approved quality :15 mm nominal bore

17.32.2 Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 453x357 mm

18.65 Providing and fixing PTMT Soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fittings arrangements, weighing not less than 106 gms.

50.18.7.2.1 Providing and fixing PVC pipes, fittings including fixing the pipe with claps at 1.00 metre spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 20 mm dia 12Kgf/cm2 - Internal work - Exposed on wall

50.18.7.4.1 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10Kgf/cm2- Internal work - Exposed on wall

50.18.7.6.1 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 10 Kfg/cm - Internal work- Exposed on wall

50.18.9.9.1 Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2

od220689/2022_2023 Providing and fixing single Suit European water closet Ceramic Floor Mounted One Piece 4D Flushing Technology including all materials and labour charges etc.

50.17.1.5 Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

od220764/2022_2023 Providing and fixing 150mm silt with CP gratings

ELECTRICAL WORKS

1.10.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVCinsulated copper conductor single core cable in surface / recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLSPVC insulated copper conductor single core cable etc as required.Group C

1.12 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single corecable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FRLS PVC insulatedcopper conductor single core cable for loop earthing as required.

2.10.1 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

1.24.3 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch

1.24.5 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet

1.24.1 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch

1.24.4 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet

1.14.2 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

1.27.2 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm)

1.27.5 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.8 Module (125mmX125mm)

1.28.2 Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.3 Module

1.28.5 Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.8 Module

1.26 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required

od222840/2022_2023 Supplying and fixing 20mm flexible conduit for wiring including all materials and labour charges etc

od222842/2022_2023 Engaging labour dismantling the existing electrical/net work cabling and switch boards etc complete

od222848/2022_2023 Supply and fixing Punch lamp including all materials and labour charges etc

od222859/2022_2023 Supply and fixing 220x220 mm LED Panel Light including all materials and labour charges etc

vipin