Construction of Combined office building at Fatehpur in Tehsil Fatehpur Distt. Kangra (H.P.)

Amount

Excavation in foundation trenches etcetra in earth work in all kinds of classification of soil such as pick work ,jumper work, blasting work, pick jumper, pick jumper blasting, jumper blasting, hard blasting conglomerate saturated soil including chiseling or any other mixed variety of soil dewatering or removal of slush and other incidental, lift up to any heights, stacking the excavated soil up to any distance clear from the edge of excavation and then returning the stacked soil in 15cm(Fifteen centimeters)thick layer when required into plinths, sides of foundation, consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as directed by the Engineer-in-Charge, including carriage of materials within all leads and lifts, other incidental charges.

Excavation in drains and channels etcetera in all kinds of classification of soil such as pick work, jumper work, pick jumper work, blasting work , soft and hard blasting or any other mixed classification of soil including chiseling or wedging out rock where blasting work is prohibited or any other mixed variety of soil including shoring, strutting dewatering or pumping and bailing out water ( surface and sub soil water ) upto any depth or any quantum of water including removal of slush which may arise during dewatering including dressing of sides and bed and disposing of all excavated earth in all leads, lifts and then returning the stacked soil in 15cm (fifteen centimeters )layers when required into plinths and sides of foundation etcetera consolidating each deposited layer by ramming, watering and then disposing of all surplus unserviceable excavated earth upto any leads,lifts and disposed materials to be neatly dressed levelled as directed by the Engineer-in Charge including carriage of material within all leads , lifts and other incidental charges and all type of taxes imposed by the Government.

Earth work in excavation for all type of road structure such as retaining walls, breast walls, culverts, drains and parapets etcetra in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rock chiseling /wedging out rocks ( Where blasting is prohibited) as per drawings and M.O.R.D. technical specification clause 305.1 and as per direction of the Engineer- In – Charge including setting out, shoring and bracing , removal of stumps and other deleterious materials and disposal of materials upto any lead and lift including dressing of sides and bottom and back filling in trenches with excavated suitable approved material to the original surface in layers not exceeding 150mm ( one hundred fifty millimeter) compacted thickness including shoring , strutting , pumping and bailing out water (surface and sub soil water ) upto any depth and any quantum of water including removal of slush which may arise out during dewatering as per direction of Engineer-in-Charge. Including carriage of materials within all leads , lifts and other incidental .

Filling in plinth with sand under floor including watering, ramming ,consolidating and dressing complete as per approved drawing, design, specifications, entire satisfaction and as directed by the Engineer-in Charge including carriage of materials within all leads, lifts and other incidental charges. The rate is including all type of taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three point one five millimeter)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights/ depths below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in foundation, footing, basis of column etcetera . and mass concrete including carriage of material within all leads, lifts and other incidental. The rate is including all type of taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three point one five millimeter)thick welded with angle iron in frames 30x30x5mm(thirty into thirty into five millimeter),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in Beams, cantilevers, girders and lintels, sides and soffits of beams, beams haunchings, cantilevers, bressumers and lintels for any depth / thickness upto all floor level including carriage of material within all leads , lifts and other incidental. The rate is including all type of taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights/ depth below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in Columns, pillars post and struts (square rectangular or polygonal in plan) in any heights / thickness/depths etcetera upto all foor level including carriage of materials within all leads, lifts and other incidental. The rate is including all type of taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three point one five millimeter)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeter),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights / depth below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors, roofs, landings , shelves and the like floor etcetera for any thickness upto all floor level including carriage of material within all leads, lifts and other incidental. The rate is including all type of taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three point one five millimeter)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeter),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in stair cases with sloping or stepped soffits excluding landing upto all floor level including carriage of materials within all leads, lifts and other incidental. The rate is including all type of taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three point one five millimeter)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeter),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters, buttresses, plinth and string courses and the like etcetera upto all floor levels including carriage of material within all leads, lifts and other incidental. The rate is including all type of taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three point one five millimeter)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeter),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls of any width etcetera upto all floor level including carriage of materials within all leads, lifts and other incidental. The rate is including all type of taxes imposed by the Government.

Providing and laying cement concrete 1:6:12 (one cement isto six sand isto twelve graded broken /crushed stone aggregate 40mm(forty millimeter) nominal size vibrated and mechanically mixed and curing complete excluding the cost of form work in foundation and plinth, in all depths including carriage of materials within all leads, lifts and other incidentals charges, as per approved drawing , design, specification, entire satisfaction and as directed by Engineer in charge. The rate is including Royality, Malkhana, Octroi and all type of taxes imposed by the Government.

Providing and laying cement concrete 1:4:8 (one cement isto four sand isto eight graded broken /crushed stone aggregate 40mm(forty millimeters) nominal size vibrated and mechanically mixed and curing complete excluding the cost of form work in foundation and plinth in all depths including carriage of material within all leads, lifts and other incidentals charges as per approved drawing ,design specification, and as directed by Engineer in charge. The rate is including all type of taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete in open foundation for all type of structure complete of plain cement concrete nominal mix 1:4:8(One cement isto four sand isto eight graded crushed/broken stone aggregate 40mm (Forty millimeter)nominal size in or under water including curing complete including pumping or bailing out water, dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights/depths in parapet including the cost of form work as per drawing and M.O.R.D technical specification as per the direction of Engineer-in-charge including carriage of material within all leads , lifts and other incidental. The rate is including of octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:5:10 (one cement isto five sand isto ten graded crushed stone aggregate 40mm (forty millimeter) nominal size) and curing complete, excluding the cost of form work in foundation and plinth/under floors in all depths/heights including pumping or bailing out water/dewatering and removal of slush as required at site complete as per HPPWD specifications or as directed by the Engineer-in-Charge and including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of Malkhana, Royality, Octroi, toll tax or any others taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:2:4 (One cement isto two sand isto four graded crushed stone aggregate 40mm (Forty milimetres) nominal size) and curing complete excluding the cost of form work, in foundation and plinth in all depths/thickness including pumping or bailing out water/ dewatering and removal of slush as required at site complete as per HP:PWD. Specifications or as per the directions of the Engineer-in-Charge and carriage of materials within all leads , lifts and other incidental charges. The rate is includes of malkana, royality, octroi, toll tax or all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:3:6 (One cement isto three sand isto six graded crushed stone aggregate 40mm (Forty milimetres) nominal size) and curing complete excluding the cost of form work, in foundation and plinth in all depths/thickness including pumping or bailing out water/ dewatering and removal of slush as required at site complete as per HP:PWD. Specifications or as per the directions of the Engineer-in-Charge and carriage of material within all leads , lifts and other incidental charges. The rate is includes of malkana, royality, octroi, toll tax or all other taxes as imposed by the Government.

Providing and laying damp proof course 100mm ( one hundred millimeters ) thick with cement concrete 1:2: 4 (one cement isto two sand isto four graded /crushed stone aggregate 12.5mm (twenty point five millimeter) nominal size and including the form work and curing complete as required at site including carriage of material within all leads, lifts and other incidental charges as per approved drawings , design, specification, entire satisfaction and as directed by Engineer in charge. The rate is including all type of taxes imposed by the Government.

Applying a coat of hot bitumen (mexphalt 80/100 ( eighty/ one hundred ) or VG-10 (VG-Ten)) using 1.70 Kg(one point seven zero)Kilogram per square meter on damp proof course after cleaning the surface with a piece of cloth lightly socked in kerosene oil complete including carriage of material with in all leads,lifts and other incidential as per approved drawings , design, specification, entire satisfaction and as directed by Engineer in charge. The rate is including all type of taxes imposed by the Government.

Providing and laying cement concrete grade M-20(M-twenty) design mix to obtain the minimum compressive strength of 20 N/mm² (twenty newton per square millimeters) with cement contents not less than 330 kg (three hundred thirty kilogram) per cubic meter vibrated and mechanically mixed and curing complete excluding cost of form work and reinforcement for reinforced concrete work in foundation, footings, bases of columns and the like in all depths/ thickness etcetera up to all floor level including carriage of material within all leads , lifts other incidental charges as per approved drawings , design, and specification, entire satisfaction and directed by Engineer in charge. The rate is including all type of taxes imposed by the Government.

Providing and laying cement concrete grade M-20(M-twenty) design mix to obtain the minimum compressive strength of 20 N/mm² (twenty newton per square millimeters) with cement contents not less than 320 kg (three hundred twenty kilogram) per cubic metre vibrated and mechanically mixed and curing complete excluding cost of form work and reinforcement for reinforced concrete work in columns, pillars, posts and struts in all depths/ thickness up to all floor level including carriage of material within all leads, lifts and other incidental charges, as per approved drawings , design specification, entire satisfaction and as directed by Engineer in charge. The rate is including all type of taxes imposed by the Government.

Providing and laying cement concrete grade M-20(M-twenty) design mix to obtain the minimum compressive strength of 20 N/mm² (twenty newton per square millimeter) with cement contents not less than 320 kg (three hundred twenty kilogram) per cubic metre vibrated and mechanically mixed and curing complete excluding cost of form work and reinforcement for reinforced concrete work:- in suspended floors, roofs, landings, shelves and their supports balconies, beams, girders, bressumers and cantilevers in all depths/ thickness etcetera up to all floor level including carriage of material within all leads , lifts and other incidental charges, as per approved drawings , designs, specification entire satisfaction and as directed by Engineer in charge. The rate is including all type of taxes imposed by the Government.

Providing and laying cement concrete grade M-20(M-twenty) design mix to obtain the minimum compressive strength of 20 N/mm² (twenty newton per square millimeters) with cement contents not less than 320 kg (three hundred twenty kilogram) per cubic metre vibrated and mechanically mixed and curing complete excluding cost of form work and reinforcement for reinforced concrete work in stair cases ( except spiral stair cases) excluding landing but including preparing of top surfaces and finishing of nosing upto all floor level including carriage of materials within all leads, lifts and other incidental charges as per approved drawings , design, specification entire satisfaction, and directed by Engineer in charge. The rate is including all type of taxes imposed by the Government.

Providing and laying cement concrete grade M-20(M-twenty) design mix to obtain the minimum compressive strength of 20 N/mm² (twenty newton per square millimeter) with cement contents not less than 320 kg (three hundred twenty kilogram) per cubic meter vibrated and mechanically mixed and curing complete excluding cost of form work and reinforcement for reinforced concrete work in walls ( any thickness ) but not less then 0.10 m ( zero point one zero meter ) including attached pilasters, buttresses, plinth and string courses etcetera and the like from top of foundation upto all floor level including carriage of materials within all leads, lifts and other incidental charges as per approved drawings , design, specification, entire satisfaction and as directed by Engineer in charge. The rate is including all type of taxes imposed by the Government.

Providing and laying cement concrete grade M-20(M-twenty) design mix to obtain the minimum compressive strength of 20 N/mm² (twenty newton per square millimeter) with cement contents not less than 320 kg (three hundred twenty kilogram) per cubic meter vibrated and mechanically mixed and curing complete including cost of form work but excluding reinforcement for reinforced concrete work in string course cooping, bed plates, anchor block plain window cill and the like upto all floor levels including carriage of material within all leads, lifts and other incidental charges, as per approved drawings , design, specification, entire satisfaction and as directed by Engineer in charge. The rate is including all type of taxes imposed by the Government.

Providing and Fixing precast cement concrete jali of Unistone/NTC ISI marked of approved shade and colour as shown in elevation/architectural drawing and fixed in cement mortar 1:3 (one cement isto three sand) upto all floor levels including carriage of material within all leads, lifts and other incidental charges, as per approved drawings , design, specification, entire satisfaction and directed by Engineer in charge. The rate is including all type of taxes imposed by the Government.

Providing in reinforced cement concrete work smooth finishing of the exposed surfaces with cement mortar 1:3 (one cement isto three sand) complete upto all floor level as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government.

Providing and laying Tor steel reinforcement of TaTa /Sail for Reinforced Cement Concrete work including bending, binding straigthing and placing in position complete including cost of binding wire and other incidentals up to all floor levels complete as per approved drawing, design, specification, entire satisfaction and direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidential. The rate is including all type of taxes imposed by the Government.

Brick masonry using second class common burnt clay building bricks in foundation and plinth with mud mortar and curing complete including carriage of materials within all leads, lifts and other incidental charges as per approved drawing , design, specification, entire satisfaction and direction of Engineer in charge. The rate is including all type of taxes imposed by the Government.

Brick work using Second class common burnt clay buildings bricks in cement mortor 1 : 6 (one cement isto six sand) in super structure above plinth level upto all floor level complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Half brick masonry using second class common brunt clay building bricks in super structure above plinth level to all floor levels in cement mortor 1 : 4 ( one cement isto four sand) as per HPPWD specifications or as directed by the Engineer-in-Charge, including curing and carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government

Square rubble masonry coursed with hard stone of approved quality in foundation and plinth including racking out joints in cement mortar 1:6 (one cement isto six sand) and curing complete including carriage of materials within all leads, lifts and other incidental as per approved drawings , design, specification, entire satisfaction and as per direction of Engineer-in-charge. The rate is including all type of taxes imposed by the Government.

Squared rubble masonry with hard stone of approved quality in foundation and plinth and curing complete excluding the cost of form work in cement mortar 1:3 ( 1 cement isto 3 sand)curing complete including carriage of material within all leads, lifts and other incidental as per approved drawings , design, specification, entire satisfaction and as per direction of Engineer-in-charge. The rate is including all type of taxes imposed by the Government.

Square rubble masonry coursed with hard stone of approved quality in foundation and plinth including racking out joints in cement mortar 1:5 (one cement isto five sand) and curing complete including carriage of materials within all leads, lifts and other incidental as per approved drawings , design, specification, entire satisfaction and as per direction of Engineer-in-charge. The rate is including all type of taxes imposed by the Government.

Stone filling in plinth with hard stone of approved quality under floor including watering, ramming ,consolidating and dressing complete as per the entire satisfaction and the direction of Engineer-in-charge. The rate is including Royality, Malkhana, Octroi and all type of taxes imposed by the Government..

Providing and laying 20mm (twenty millimeter) thick Baroda green marble in work Top/Counter tab over 20mm (twenty millimeter) thick base of cement mortar 1:3 (One cement : three sand) including jointing with cement mortar 1:2 ( once cement : two marble dust) with an admixture of pigment to match the shade of marble including Semi/Round nosing as per HPPWD specifications approved drawing,design or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts.The rate is including of Royality,Malkhana,octroi and other incidentals and all type of taxes imposed by the Government.

Providing and fixing anodised aluminium work for frames of door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make Jindal/Hindlaco conforming to IS: 733 and IS: 1285 anodised transparent or dyed to required shade according to IS :1868. (Minimum anodic coating of grade AC :15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etcetra aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleat angle, aluminium, snap beading for glazinge/ panelling, C.P. brass/stainless steel screws all complete as per architectural drawings specification,design and as per the directions of Engineer-In-Charge including carrige of material within all leads, lifts and other incidentals directed by the Engineer-in-charge.The rate is including of Royality,Malkhana,octroi and other incidentals and all type of taxes imposed by the Government.

Providing and fixing anodised aluminium work for shutters of doors windows & ventilators including providing and fixing hinges/pivots and making provisions for fixing of fittings with extruded built up standard tubular and other sections of Jindal/Hindalco of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etctera aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazing/ panelling C.P. brass/stainless steel screws. All complete as per architectural drawings and the directions of Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive octroi,Royality.Malkhana and all other taxes imposed by the Government.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etctera with PVC/neoprens gasket complete as per the architectural drawings and the directions of Engineer-In-charge (cost of aluminium snap beading shall be paid in basic item.) Glazing with glass panes of 6mm(Six millimetres) thickness of Modiguard Saint Gobin (weight not less than 15.00 kg/sqm (Fifteen point zero kilgrams/square metre) including carriege of material within all leads, lifts and other incidentals.The rate is inclusive octroi,Royality.Malkhana and all other taxes imposed by the Government.

Providing and fixing 5 mm ( five milimetre ) thick glazing in aluminium door window ventilator etctera with frosted glass of Modi Guard/Saint Gobin weight not less than 12.50 kg /per square metre(Twelve point fifty kilogram) within all leads, lifts of materials and other incidentals, as per specification approved drawing, design and as directed by the Engineer-in-Charge.The rate is inclusive of all type of taxes imposed by the the Government.

Providing and fixing 12mm ( twelve milimetre ) thick prelaminated partical board panel ( one side) BWP phenol bonded of exterior/interior grade for panalled shutters of SDB of Kitvista/Action Tesa with necessary secrew etctera and having aluminium sheet lining from in side as per specification approved drawing, design and as directed by the Engineer-in-Charge .The rate is inclusive of all type of taxes imposed by the the Government.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etctera with PVC/neoprens gasket Glazing with glass panes of 5mm (Five milimetre) thickness (weight not less than 12.50 kg/sqm (Twelve point fifty kilograms per square metre) complete as per specification architectural drawings design and as per the directions of Engineer-in-Charge (cost of aluminium snap beading shall be paid in basic item) including carriage of material within all leads, liftsb and other incidentals, as per specification approved drawing, design and as directed by the Engineer-in-Charge.The rate is inclusive of all type of taxes imposed by the the Government.

Providing and fixing Factory made of Greenlam/Century/Alpro 12mm (Twelve milimetre) thick preliminated board (Both side) BWP phenol bonded of Kitvista/Action Tesa exterior/interior grade, of approved shade, in emfill/ panel of doors and the like (frame work and cover fillets to be measured and paid for separately) including carriage of materail within all leads, lifts and other incidentals as per approved architectural drawing, design and specification and as directed by the Engineer-in-Charge.The rate is inclusive of all type of taxes imposed by the the Government.

Providing and fixing aluminium anodised powder coated gril of required pattern to existing window/ventilatior with 80mmx80mm(Eighty into eighty millimetre) panels holes with 25x8mm (Twenty five into eight milimetres )thick aluminium flat in windows and ventilators including fixing with aluminium screws or bolts and nuts complete in alluminium channels base frames (Aluminium channels base frames to be measured and paid for separtely within all leads, lifts and other incidentals as per approved architectural drawing, design and specification and as directed by the Engineer-in-Charge.The rate is inclusive of all type of taxes imposed by the the Government.

Provideing and fixing wall panelling of 12 mm (twelve milimetre)thick ply finished with 3 mm thick GREEN PANEL MAX CREATIVE VANEER VO -II cherry pine lamination to be finished with natural teak wood shade as per design over soft wood frame work 40x40mm @ 60cm (Forty into forty millimetresixty centimetre centre to centre) and top of paneling shall be finished with 60x25mm (suxty into twenty five millimetre) decorative moulding as per specification,approved drawing,design complete as directed by the Engineer-in-Charge, including carriage of materials within all leads , lifts and other incidental charges.The rate is inclusive of all type of taxes imposed by the the Government.

Providing and fixing Everest designor fiber board ceiling tiles of 60*60 cm (sixty into sixty centimeter) size of approved quality with butt jointing and steel screws(frame work and fillets to be measured and paid for separately) as directed by the Engineer-in-Charge, including carriage of materials within all leads , lifts and other incidental charges.The rate is inclusive of all type of taxes imposed by the the Government.

Providing and fixing phenotherm ceiling plain or perforated on G.I grid frame of approved quality with butt jointing and steel screws(frame work and fillets to be measured and paid for separately) including carriage of material within all leads, lifts and other incidentals as per approved architectural drawing, design and specification and as directed by the Engineer-in-Charge.The rate is inclusive of all type of taxes imposed by the the Government.

Providing and fixing ACP Alstone tiles 60*60 cm (sixty into sixty centimeter) ceiling over main beam & T -section frame 25*50*5 mm (twenty five into fifty into five milimeter) work complete within all leads, lifts and other incidentals as per approved architectural drawing, design and specification and as directed by the Engineer-in-Charge.The rate is inclusive of all type of taxes imposed by the the Government.

providing and fixingChromium plated curtain rail with rollers stop ends and brackets in pelmets rod 25mm dia (twenty five milimetre) (actual length) of rails to be measured)as per HPPWD specification or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government.

Providing and fixing railing in stair case with 19mm*19mm (nineteen into nineteen milimetre) M.S solid square bars in combination with M.S flat 19*6 mm (nineteen into six mililetre) as per drawing and design including fixing of rounded hand rail of 1St class Indian Teak wood out of 7.5 cm*5.0 mm(seven point five centimetre into five milimetre) size in straight length complete as per HPPWD specification or as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government.

Providing and fixing railing with 50mm*50mm M.S. hollow pipe 3 mm thick and having bluster of 20*20 mm solid square bars as per drawihg and design on parapets walls complete as per HPPWD specification or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government.

Providing and fixing 50mm dia M.S. pipe hand rail slip resistance with rounds ends at two levels at 75 cm and 90cm height welded to M.S. pipe bolustars 25mm dia metre @ 60cm (sixty bentimetre centre to centre embeded in cement concrete including painting with red lead paint after throughly cleaning the surface as per HPPWD specification approved drawing design or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government.

Providing and fixing Dias and other two side's table shall be made of 19 mm thick commercial board including Drawars, vertical portion and cabinet work. The table TOP shall be made of 25 mm thick commercial board. The table top dias, vertical partitions of table towards the public side and all other sides towards sitting shall be finished with 3 mm thick green panel max creative veneer VO-II cherry pine up laminating to be polished in teak wood natural shade. All visible portions of commercial board shall be finished with hard wood edging of 12 mm thick and 19 mm wide.The table shall have hard wood beading/ edging and out of 50x25 mm ( fifty into twenty five milimetre) on three side complete as per drawaing, design specification and as per direction of Engineer -in - Charge .The measurment for the payment shall be made for exposed faceonly.The rate is inclusive of all type of taxes imposed by the the Government.

Providing and fixing witness box consist of shesham wood post 0n four corner out of 75*75 mm size ( seventy five into seventy five milimetre ) (decorative with bluster in between the post shell be made of shesham wood 40 mm ( Forty milimeters )diametre and to be fixed with decorative and rail of shesham having size of 75*65 mm ( seventy five into sixty five milimetres ) as per specification, approved design and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government.

providing and laying 19 mm (Ninteen millimtere) thick having sixe 55x55 cm (fifty five into fifty five centimetre) of uniform colour with Mirrior polished Kota stone slab flooring 705 cm (seven point centimetre)wide white marble and 20 mm ( twenty milimetre) (average) thick base of cement mortor 1:4(1 cement :4 sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab. including rubbing and polishing complete Upto all floor levels as per specification, approved design and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government.

Providing and laying 60*60* cm ( sixty into sixty centimetre ) digital vetrified tiles AGL/KAJARIA/CERA grade iv in flooring treads of steps and landing laid on bed of 12mm thick ( twelve milimeter ) thick base of cement mortor 1:3(1Cement:3 sand and jointed with cement slurry finished with flush pointing in white cement mixed with pigment of required shade match the shade of tiles complete.Upto all floor levels as per specification , approved drawing design and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of Malkhana, Royality, Octroi, toll tax or any other taxes imposed by the Government. .

Providing and laying 25mm (Twenty five milimetre) thick Kota Stone flooring 55x55cm (Fifty five into Fifty five centimetres) of uniform colour in flooring laid over 20mm (Twenty milimetres) thick base of cement mortar 1:4(One cement: Four sand) and jointed with neat cement slurry mixed with pigment to matcvh the shade of the slab including rubbing and polishing complete Upto all floor level as per specification approved drawing,design and as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government. .

Providing and laying ceramic tiles (antiskid) of Asian/NITCO Grade-IV in flooring 300x300mm/400x400 (Three hundred into Three hundred milimetres/Four hundred into four hundred) size in treads of steps flooring laid on a bed of 12mm (Twelve milimetre) thick cement mortar 1:3 (One cement : three sand) finished with flush pointing in white cement upto all floor level as per specification, approved drawing, design and as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government. .

Providing and laying 60 cm *60* cm ( sixty centimetres into sixty centimetres ) DOUBLE charged vetrified digital tile of AGL/KAJARIA/CERA grade IV in flooring, treads of steps and landing laid on bed of 12mm ( twelve milimetres ) thick base of cement mortor 1:3(one Cement isto three sand ) and jointed with cement slurryand finished with flush pointing in white cement as per specification, approved, drawing, design complete.Upto all floor level and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government.

Cement concrete flooring 1:2:4 (One cement isto two sand isto four graded stone aggregate 20 mm nominal size ( twenty milimetre) laid in one layer finished with a floating coat of neat Cement. 40 mm ( forty milimetres ) thick Upto all floor level as per specification, approved drawing, design and as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government.

Providing and laying heavy duty precast PVC/Fibre mould inter locking paver blocks vibro compacted upto M- 50 (M- fifty) grade i/c border or kerb block grey or coloured over sub-base of concrete laid over 25mm thickness of cement mortar (1:4) as per drawing and specification complete in all respect . 40mm(forty milimetres) thick inter locking blocks as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government. .

Providing and laying mirrior polished Kota stone 19 mm ( nineteen milimetre ) thick in risers of steps,SKIRTING dado and pillars laid on 12 mm( twelve milimetres) (average) thick cement mortar 1:3 (one cement isto three sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing Semi/Round nosing as per specifications approved drawing, design Upto all floor level and as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government. .

Providing and laying 60x60cm. (Sixty into sixty centimetre) Digital tile of AGL/Kajara/Cera Grade-IV in skirting , risers of steps and dado laid on 12 mm ( twelve milimetres) average thick cement mortar 1:3 (one cement isto three sand) and jointed with grey cement slurry mixed with pigment to required shade to match the shade of tiles complete upto all floor level as per specifications approved drawing, design and as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government. .

Providing and laying Kota stone slab 19 mm ( nineteen milimetres ) thick of uniform colour in risers of steps, skirting , dado and pillars laid on 12 mm ( twelve milimetres )(average) thick cement mortar 1:3 (One cement isto three sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing/semi/round nosing upto all floor level as per specification, approved drawing, design and as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government.

Providing and laying 30x45cm (Thirty into Forty five centimetres) of Cera/Kajaria/Nitco or its equvalent white glazed tiles in dado or skirting laid on a bed of 12mm (Twelve milimetres) thick cement mortar 1:3(One cement isto Three sand) finished with flush pointing in white cement complete as per specifications, approved drawing, design and as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government.

First quality White glazed tiles 6 mm ( six milimetres ) thick in skirting risers of steps and dado laid over 12 mm ( twelve milimetrs ) thick cement mortar 1:3 (One cement isto three sand) and jointed with cement slurry mixed with pigment to match the shade of tiles upto all floor level as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government.

Cement plaster skirting up to 30 cm ( thirty centimetre) height with cement morter 1:3 (One cement isto sand) finished with a floating coat of neat cement including rounding of junction with floor up to floor all level 20mm ( twenty milimetre) thick as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government.

Providing and fixing glass strips 40 mm (forty millimeter) wide and 4 mm (four millimeter) thick. in flooring and plinth protection complete as required as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government.

Providing and fixing UNI STONE 12mm ( twelve milimetre) thick cladding on R.C.C.surface side as on faces of Arch masonry walls etcetra.on 12mm. ( twelve milimetre ) thick cement motar 1:3(One cement isto three sand) and jointed with cement slurry including scaffolding complete as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government.

Providing and fixing GRANITE STONE clading on walls on 12mm.( twelve milimetre) thick cement motar 1:3 (One cement isto three sand) and jointed with cement slurry including scaffolding etc. complete upto all floor level as per specifications, approved drawing, design and as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government.

Providing and fixing 0.60mm (Zero decimal Six Zero milimetres) thick prepainted steel sheet of Dura shine/Sail Tata of dark grey colour/shade in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating to back coat of polyster of 10 (Ten) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks,bolts and nuts 6mm (Six milimetre) diametre with prepainted limpet and rubber washers complete with all accessories as required as per specifications, approved drawing, design and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government.

Providing and fixing ridges or hips 60 cm (sixty centimeters)over all with 0.60mm (zero point six zero millimeters) thick prepainted steel sheet of (dark grey shade) in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster (RMP) organic coating of 20 ( twenty ) micron over, 5 ( five ) micron primer coating back coat of polyster of 5 ( five ) micron over, 5 ( five micron) primer coating including fixing with prepainted self tapping screws etcetera of size 5.5mm dia ( five point five millimeter) dia meter and 75.5mm ( seventy five point five millimeter ) length with EPDM seal with all accessories as required as per specification, approved drawing, design, as per entire satisfaction and directions of the Engineer in charge including carriage of materials within all leads and lifts and other incidental. The rate is including all type of taxes imposed by the Government.

Providing and fixing valley 90cm ( ninety centimeters )over all 0.60mm ( zero point six zero millimeter ) thick prepainted steel sheet of (dark grey shade) in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (R.M.P.) organic coating of 20 (twenty) micron over 5 (five) micron coating to back coat of polyster of 5 microns over 5 microns primer coating including fixing with prepainted self tapping screws etcetera size 5.5mm dia ( five point five millimeter) dia meter and 75.5mm ( seventy five point five millimeter ) length with EPDM seal complete with all accessories as required as per specification, approved drawing and design as per entire satisfaction and the directions of Engineer-in- charge including carriage of materials within all leads, lifts, and other incidental. The rate is including all type of taxes imposed by the Government.

Providing and fixing M.S. (Mild steel) B.P. (black plain) sheet of Tata/Sail 2mm (two millimeter) thick in eaves boards/ facia/ soffits/ ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge ( Base members of steel work shall be measured and paid separately) as per specification, approved drawing, design, as per entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidental. The rate is including all type of taxes imposed by the Government.

Providing and fixing 30cm (thirty Centimetre) wide 30cm (thirty centimetre) over all semi-circular 0.63mm (Zero point sixty three milimetres) thick plain G.I. sheet of TATA / Sail gutter fixed with bolts and nuts and washers etcetera including making necessary connections with rain water pipe complete as per design drawing and specifications including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-Charge. The rate is inclusive of all taxes imposed by the Government.

Providing and fixing reinforced cement concrete Chajja/Gutter of grade M-20 design mix obtain the minimum compressive strength of 20N/mm2 (twenty newtin per square millimetre) with cement contents not less than 320 kg/m3 (three hundred twenty kilogram per cubic metre) vibrated and mechanically mixed and curing complete including finishing the exposed surface with cement motar 1:3 to give a smooth and even surface including centering, shuttering form work but excluding the reinforcement as per specification approved drawing, design and carriage of material with in all leads, lifts and other incidentals. The rate is inclusive of all taxes imposed by the Government.

Providing and Fixing on wall faces 150mm (one hundred fifty millimeter) diameter unplasticzed polyvinyl chloride rain water pipe of Supreme/Sant/Finolex/Prince of working pressure not less than 4.5kg (four point five kilogramme) per square centimeter including filling the joints with adhesive of approved make complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government

Providing and fixing on wall faces Unplasticzed Poly Vinyl Chloride accessories for rain water pipes of Supreme/Sant/Finolex/Prince including filling the joints with approved adhesive complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government. P.V.C. Plain bend 150 mm ( One hundred fifty millimetres ) nominal diameter.

Providing and fixing 150 mm (one hundred fifty millimeter) diameter, mild steel Holder Bat clamps of approved design to PVC pipes embedded in and including cement concrete blocks 10x10x10cm (ten into ten into ten centimeter) of 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm(twenty millimetre) nominal size) mix including cost of cutting holes and making good the walls complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Steel work welded in built up sections joints channels, angles, tees frame work Tata/Sail for ceiling flats with connection plates or angles, cleat as in trusses, trussed purlins main and cross beams, hips jack rafters, purlins connected to common rafters and the like in building including cutting, fixing, lifting, hoisting and; placing in position complete and applying a coat of red lead paint including carriage of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of all type of taxes imposed by the Government.

Providing and fixing M.S.fan clamp type -1 of 16 mm (sixteen millimeter) diameter M.S. bar bent to shape with hooked ends in R.C.C slab during laying including painting the exposed portion of loop,all as per standard design complete as per HPPWD Specification or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

15 mm (fifteen millimeter) thick cement plaster with cement mortar 1 : 6 ( 1 cement : 6 sand) in single coat on rough side of brick / concrete / stone walls for interior plastering up to all floor level including arises, internal, rounded angles ,chamfers and / or rounded angles in all girth and finished even and smooth complete as per HPPWD specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government.

15 mm (fifteen millimeter) thick cement plaster with cement mortar 1 : 6 ( 1 cement : 6 sand) in single coat on fair side of brick / concrete / stone walls for interior plastering up to all floor level including arises, internal, rounded angles, chamfers and / or rounded angles in all girth and finished even and smooth complete as per HPPWD specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government.

15 mm (fifteen millimeter) thick cement plaster with cement mortar 1 : 5 ( one cement isto five sand) in single coat on fair side of brick / concrete / stone walls for interior plastering up to all floor level including arises, internal, rounded angles, chamfers and / or rounded angles in all girth and finished even and smooth complete as per HPPWD specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government.

6 mm (six millimeter) thick cement plaster to celing with cement mortar 1 : 3 ( 1 cement : 3 sand ) and curing complete upto all heights/ floor level as per HPPWD specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government.

15 mm (fifteen millimeter) thick cement plaster with cement mortar 1 : 3 ( one cement isto three sand) in single coat on fair side of brick / concrete / stone walls for interior plastering up to all floor level including arises, internal, rounded angles, chamfers and / or rounded angles in all girth and finished even and smooth complete as per HPPWD specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government.

Painting (two coats) with satin enamel paint of Asian/Nerolac/Dulux approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including t horoughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for mating the surface as per HPPWD specification or as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental. The rate is inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government.

Distempering (two or more coats) with Ist quality oil bound washable distemper of Asian /Nerolac/Dulux approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including priming coat of distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter including preparing the surface even and sand papered smooth priming coat with distemper primer upto all floor level including carriage of material within all leads, lifts, and other incidental and as per specification, approved drawings, design as per entire satisfaction and as directed by the Engineer in charge. The rate is including all type of taxes imposed by the Government.

Wall painting (two or more coats) with plastic emulsion paint of Asian/Dulux/Nerolac or equivalant of approved brand and manufacture on undecorated wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying of putty as required for making the surface including carriage of material within all leads, lifts of materials and other incidental and as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is including all type of taxed imposed by the Government.

Providing water proofing treatment white laying the slab toilet anf kitchen with Dr. Fixit PIDI proof LW+ shall be mixed in water and the ratio shall be 200 ml ( two hundred milimetre) of PIDI proof LW FW 50 KG ( fifty kilogram ) of cement ( liquid water proofing compound for concrete to reduce dampness ) all joints of down pipes shall be sealed with water proofing sealent water proofing treatment shall be done with Dr. Fixit P.U. sealent ( single component Non -sag polywrethane high performance sealent for joints between different construction material before flooring in toilet and kitchen two coats of Dr. Fixit Pidi in 2x8 ( two into eight ) shall be applied including carriage of material within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of all type of taxes imposed by the Government.

Finishing wall with weather proof exterior grade emulsion of Asian paint apex/ Ultima or Dulux approved on undecorated wall surfaces with two coats to give an even shade and final finish after thoroughly cleaning / brushing the surfaces to remove all dirt , dust mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for making the surfaces complete upto all floor level including carriage of materials with in all leads and lifts and as per specification approved drawings, design as per entire satisfaction and direction of the Engineer in charge. The rate is including all taxes imposed by the Government.

Applying Birla white wall care putty over plastered surfaces after thoroughly brushing the surface free from mortar drops, dust, loose material and other foreign matter, sand papered smooth to give final finish to the surfaces complete including carriage of materials with in all leads and lifts and as per specification approved drawings, design as per entire satisfaction and direction of the Engineer in charge. The rate is including all taxes imposed by the Government.

Providing and fixing of expansion joint system related with wall joint (internal/ external and horizontal /Vertical ) location as per drawings and direction of Engineer-In- Charge. The horizonral and vertical joints shall be filled up with polysterence backer or rod prime the two sides of the properly prepared joint surface with PIDI prime 'A' with "A" brush PIDI is a single componet primer suitable for bath porus and non porus suface the horizontal prime joints should be filled up with Dr. Fixit polysterence sealen 42 P and vertical joints shoul be filled up DR. fixit polysterence sealent 41.G the material shoul be such that it provides on expension joint systen suitable for horizontal and vertical wall to wall wall to corner applicating bath new and existing construction in office building and complxes with no slipping drain tendency amongst the componets of the joint system shall utilize light weight with polysterence back or road surface machenically locking the multicellular to facilitatemovement including carriage of materials with in all leads, lifts and as per specification approved drawings, design as per entire satisfaction and direction of the Engineer in charge. The rate is including all taxes imposed by the Government.

Providing plinth protection 50mm ( fifty milimetres ) thick in cement concrete 1:3:6 (one Cement isto three Sand isto six Graded stone aggregated 20mm ( twenty milimetre) nominal size) with 23cm. (twenty three centimetre dia half sand stone ware pipe drain including carriage of materials with in all leads, lifts and as per specification approved drawings, design as per entire satisfaction and direction of the Engineer in charge. The rate is including all taxes imposed by the Government.

Providing under layer for plinth protection of 75mm (seventy five millimeters ) thick ( unconsolidated ) bed of dry brick/stone broken/ crushed aggregate 40mm ( forty millimeters ) nominal size well rammed and consolidated and grouted with fine sand including preparation of ground including carriage of materials within all leads, lifts and other incidental charges as per specification, approved drawings, design as per entire satisfaction and as directed by the Engineer in charge. The rate is including all type of taxes imposed by the Government.

Providing and fixing stainless steel wire mesh in aluminium windows, clearstory windows including the cost of PVC /Neroprens gasket etcetera including carriage of materials within all leads, lifts and other incidental charges as per specification, approved drawings, design as per entire satisfaction and as directed by the Engineer in charge. The rate is including all type of taxes imposed by the Government.

Providing and fixing 200mm ( two hundred milimetre) wide cast iron rungs with chequared or ribbed on slip surfaces including fixing in manhole with 200x200x100mm ( two hundred into two hundred into one hundred milimetre) cement concrete 1:3:6 (one cement isto three sand isto six graded /crushed stone aggregate 20mm nominal size) mixed and vibrated mechanically and curing complete excluding the cost of form work.including carriage of material within all leads lifts and other incidental charges as per specification, approved drawings, design as per entire satisfaction and as directed by the Engineer in charge. The rate is including all type of taxes imposed by the Government.

Providing and fixing of medium duty cover with frame of internal dimension 455x610mm (four five five into six one zero millimetre) weight rectangular 38 kg. C.I. cover ie. weight of cover should be 23 kg. and weight of frame should ber 15 kg. (fifteen kilogram) as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government.

Providing and laying PVC collar for pipes of Supreme/Finolex/Prince and plain ended C.I. ( cast iron ) specials with complete including testing of joints 150mm ( one hundred fifty milimetre ) nominal size as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government.

Providing and fixing M.S. grill jali panel on chamber.as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government.

Providing and laying at site crushed stone aggregate 40mm ( forty milimetres ) nominal size in soak pit and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government.

Providing and fixing PVC spigot and socket soil waste and ventilating pipes having working pressure not less than 110mm ( one hundred ten milimetres ) dia nominal size as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is inclusive of Malkhana, Royality, Octroi, toll tax or any other taxes imposed by the Government.

Providing and fixing cast iron cowl 150mm ( one hundred fifty milimetre) dia nominal size of Supreme/Finolex/Prince and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government.

Providing and fixing PVC spun fittings and accessories PVC door bends of required degree(any radius) of Supreme/Finolex/Prince with oval all access door insertion rubber washer 2mm ( two milimetre ) thick bolts and nuts complete 150mm ( one hundred fifty milimetre) nominal size as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government

Providing and fixing PVC fittings and accessories collars of required degree(any radius) of Supreme/Finolex/Prince with over all access (b) door insertion rubber washer 2mm ( two milimetre )thick bolts and nuts complete 150mm ( one hundred fifty milimetre) nominal size as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government

Providing and laying 100mm (hundred millimeter) dia P.V.C. pipe weep holes in brick masonry/ stone masonry, plain/reinforced concrete abutment, wing wall, return wall and retaining/breast walls through the full width of the structures with slope of 1(V): 20(H) towards drawing face complete as per drawing and M.O.R.D. technical specifications clause 614,709,1204.3.7 and as per direction of Engineer – in- Charge including carriage of materials within all leads and lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government

Construction of embankment with approved materials obtained from borrow pits, with in all lifts and leads transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 as per MORD technical specification clause 303-1 including hauling of material in all leads, lifts and other incidental or as per the entire satisfaction and directions of Engineer-in-Charge. The rate including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Back filling behind abutments, wing wall and return wall complete as per drawing and M.O.R.D. technical specifications clause 1204.3.8 Granular material and as per direction of Engineer – in- Charge including carriage of material within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and laying cobbler stone paver of uniform thickness/ size/colour laid on prepared surface as per drawing and techanical specifications clouse 1501.as per direction of Engineer – in- Charge including carriage of materials within all leads and lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government

Construction of granular sub base by providing well graded material mixing in a mechanical mix plant at OMC,carriage of mixed material to work site up to any lead , spreading in uniform layers with Tractor mount grader with rotavator at OMC, and compacting with three wheel 80-100 (Eighty-hundred) KN static roller to achieve the desired density, complete as per technical specification clause-401 for Grading-I material, as per the entire satisfaction and direction of Engineer-in-charge. The rate is including octori, royality, malkana, toll tax, sale tax or other taxes imposed by the Government.

Construction of un- reinforeced cement concrete dowel jointed expension and construction joint plain cement concrete pavement thickness as per design over a prepared sub grade with 43 grade cement any other type as per clause 1501.2.21 M-30 grade as per the entire satisfaction and direction of Engineer-in-charge. The rate is including octori, royality, malkana, toll tax, sale tax or other taxes imposed by the Government.

Steel work welded in built up sections, trusses and framed work of Tata/Sail composed of beam, joists, channels, angles, tees, flat and connectingplates or angle cleats etcetera. as in trusses and trussed purlins, main and cross beams hip and jack rafters, purlins connected to common rafters and the like in building including cutting, fixing, lifting, hoisting and placing in position complete and applying a priming coat of red lead paint complete,as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.(i) in gratings framed guard bars, ladders, railings , brackets and similar works ,ceiling frames etcetra.

Providing and fixing Plytheline alminium polythylene (PL-AL-PE) composite pressure pipe UV steplized with carbon black confirming to IS 15450-2004.1620 (20mm ( twenty milimetrs ) O.D. pipe)as per the entire satisfaction and direction of Engineer-in-charge. The rate is including octori, royality, malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying in trenches ISI marked 25mm (twenty five millimeter) nominal bore galvanized mild steel tubes (medium grade) tube fittings of approved brand and manufacture (TATA/JINDAL make) or its equivalent complete (Earth work in trenches to be measured and paid for separately) as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and laying in trenches ISI marked 20mm (twenty millimeter) nominal bore galvanized mild steel tubes (medium grade) tube with fittings of approved brand and manufacture (TATA/JINDAL make) complete (Earth work in trenches to be measured and paid for separately) as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, Toll Tax, Sales tax or any other taxes imposed by the Government.

Providing and fixing ISI marked 20mm (twenty milimeter) nominal bore/diameter to wall, ceiling and floor galvanised mild steel tubes (medium grade) tube with fitting and clamps including making good the wall, ceiling and floors as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, Toll Tax, Sales tax or any other taxes imposed by the Government.

Providing and fixing 150 mm (one hundred fifty millimeter) diameter, mild steel Holder Bat clamps of approved design to CI or SCI /PVC pipes embedded in and including cement concrete blocks 10x10x10cm (ten into ten into ten centimeter) of 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm(twenty millimetre) nominal size) mix including cost of cutting holes and making good the walls complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing 100 mm (one hundred millimeter) diameter, mild steel Holder Bat clamps of approved design to CI or SCI /PVC pipes embedded in and including cement concrete blocks 10x10x10cm (ten into ten into ten centimeter) of 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm(twenty millimetre) nominal size) mix including cost of cutting holes and making good the walls complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Making connection of galvanised Mild Steel distribution branch with galvanised Mild Steel main 20mm to 40mm (twenty millimeter to forty millimeter) nominal bore by providing and fixing tee including cutting and threading the pipe complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing 150mm (One hundred fifty millimeter) nominal diameter) PVC pipe class "A" of Supreme/Finolex/Prince high pressure soil waste and ventilating pipes ISI marked including fixing with approved adhesive complete 8mm (eight millimeter) thick complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing 110mm (One hundred ten millimeter) nominal diameter) PVC pipe class "A" of Supreme/Finolex/Prince high pressure soil waste and ventilating pipes ISI marked including fixing with approved adhesive complete 4.6mm (four point six millimeter) thick complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and laying in tranches PVC D-Plast pipe class "A" water waste and ventilating pipes of Supreme/Finolex/Prince ISI marked including fixing with approved adhesive mixture complete 4.6mm thick complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Sales tax, Toll tax or any other taxes imposed by the Government. 110 mm dia ( one hundred ten milimetre )

Providing and fixing P.V.C. plain bend of Supreme/Finolex/Prince including filling the joints with approved adhesive complete as per HPPWD specification or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental Charges. The rate is includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government 150mm (one hundred fifty millimeter) dia meter.

Providing and fixing P.V.C. plain bend of Supreme/Finolex/Prince including filling the joints with approved adhesive complete as per HPPWD specification or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental Charges. The rate is includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government 110mm (one hundred ten millimeter) dia meter.

Providing and fixing P.V.C. plain bend of Supreme/Finolex/Prince including filling the joints with approved adhesive complete. as per HPPWD specification or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government 150mm (one hundred fifty millimeter) dia meter.

Providing and fixing P.V.C. plain bend of Supreme/Finolex/Prince including filling the joints with approved adhesive complete. as per HPPWD specification or as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental Charges. The rate is includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government 110mm (one hundred ten millimeter) dia meter.

Providing and fixing PVC heal rest bend ISI marked Supreme/Finolex/Prince including fixing with approved adhesive complete as per HPPWD specification or as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental Charges. The rate is includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government 150mm (one hundred fifty millimeter) dia meter.

Providing and fixing PVC heal rest bend ISI marked of Supreme/Finolex/Prince including fixing with approved adhesive complete as per HPPWD specification or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental Charges. The rate is includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government 100mm (one hundred millimeter) dia meter.

Providing and fixing 150mm (one hundred fifty milimeter) diameter P.V.C. collars ISI marked of Supreme/Finolex/Prince including fixing with approved adhesive etcetera complete as per HPPWD specification or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental Charges. The rate is includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 110mm (one hundred ten milimeter) diameter P.V.C. collars ISI marked including fixing with approved adhesive etc. complete as per HPPWD specification or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental Charges. The rate is includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing ISI marked 150 mm ( one hundred fifty milimetres ) PVC Cowl of Supreme/Finolex/Prince including fixing with approved adhesive as per HPPWD specification or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental Charges. The rate is includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing ISI marked 110 mm ( one hundred ten milimetres )PVC Cowl of Supreme/Finolex/Prince including fixing with approved adhesive as per HPPWD specification or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental Charges. The rate is includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing ISI marked 110x90mm (one hundred ten into ninety millimetre) nominal diameter PVC floor trap of self cleaning design of Supreme/Finolex/Prince complete excluding fixing with approved adhesive cost of cutting and making good the walls and floors complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing Hind Ware/Cera nake European universal vitreous china snow white water closet (WC pan ) No 2061 size 57x46*40cm ( fifty seven into forty six into forty centimetre) ( earth work ,bed concrete ,foot rest and trap to be measured and paid for separately as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing HIND WARE/CERA MAKE or its equivalent Orrisa Pattern vitreous china water closet squatting pan (Indian type W.C. pan) size 58x44cm (fifty eight into forty four centimetre) (Earth work, bed concrete, foot rest and trap to be measured and paid for separately) including carriage of materials within all leads, lifts and other incidentals. The rate is including Sales tax, Toll tax or any other taxes imposed by the Government .

Providing and fixing Hind Ware/Cera European seat CRANE No.7011 of height 50cm. (fifty centimetre) vitreous china snow white water closet ( Indian type WC pan ) for person with disability ( earth work ,bed concrete ,foot rest and trap to be measured and paid for separately. as per HPPWD specification or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental Charges. The rate is includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing grab bars of chromium plated 40mm (forty millimetre)diametre steel pipe at 78cm (seventy eight centimetre) height fixed with M.S. plate at the position of the seat and wash basin complete with walls with necessary screws for person with disability as per HPPWD specification or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental Charges. The rate is includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing vitreous china wash basin NO. 1012 CANONCERA of hindware of snow white shade having size 45x35cm. (forty five into thirty five centimetre) with single hole for pillar tap with CI or MS bracket painted white including cutting holes and making good the same but excluding fittings as per HPPWD specification or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental Charges. The rate is includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing vitreous china wash basin canon No 7707 of hindware/Cera of snow white shade having size 45x30 cm. (forty five into thirty centimetre) with single hole for pillar tap with CI or MS bracket painted white including cutting holes and making good the same but excluding fittings as per HPPWD specification or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing ISI marked stainless steel kitchen sink No CKSP 57*45*22 cm ( fifty seven into forty five into twenty two centimetre ) of Diamond/Unik with CI or M.s brackets painting white making holes in the walls and making good the same complete. as per HPPWD specification or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental Charges. The rate is includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing ISI marked stainless steel kitchen sink No NCKS 100*51 cm ( one hundred into fifty one centimetre) of Diamond/Unik with CI or M.s brackets painting white making holes in the walls and making good the same complete as per HPPWD specification or as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government. .

Providing and fixing 10/12.50/15 (ten/twelve decimal five zero/ fifteen) liters poly venycholride low level flushing cistern No.2603 of Cera/Hindware having dual flushing systern with a pair of C.I. or mild steel brackets complete with fitting such as lead valve less syphon 15mm (fifteen millimeter) nominal size PVC ball valve with polythene float with push button couplings for connection with inlet, outlet and overflow pipes 40mm (forty millimeter) diameter C.P flush bend including cutting holes in walls and making good the same and connecting the flush pipe with cistern and closet ( over flow pipe to be measured and paid for separately ) complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing PVC 100mm dia "P" or "S" trap for water closet including jonting the trap and with the pan and PVC pipe with approvel adhesive as per HPPWD specification or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental Charges. The rate is includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 32mm (thirty two millimeter) diameter rubber plug for sink/wash basin as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing 32mm (thirty two millimeter) diameter M.I. Union for wash basin or sink as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing 32mm (thirty two millimeter) diameter C.P. brass waste for wash basin or sink as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental. The rate is inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing 600x450mm (Six hundred into four hundred fifty millimeters) bevelled edge mirror of superior glass of (atul Modiguard/Goldenfish) mounted on 6mm (Six millimeters) thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is including Sales tax, Toll tax or any other taxes imposed by the Government

Providing and fixing 600x20mm (six hundred into twenty millimeters) C.P. brass towel rail of approved brand and manufacture (HINDWARE/CERAMAKE)/ Jal/Jaguar/ESS ESS or its equivalent complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing 600x120mm (six hundred into one hundred twenty millimeters) glass shelf with C.P. brass brackets and guard rail complete fixed to wooden plugs with C.P. brass screws complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing chromium plated brass soap dish with C.P. brass bracket fixed to wooden cleats with C.P. brass screws complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing chromium plated brass toilet paper holder as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) diameter ISI marked C.P. brass pillar tap with capstan head of Jal/Jaguar/ESS ESS as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) diameter ISI marked C.P. brass bib tap with capstan head of Jal/Jaguar/ESS ESS as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) diametre ISI marked C.P. brass bib tap (superior or heavy type) of Jaguar/ESS ESS Jal/Jguar or its equivalent of approved quality complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) diameter C.P. stop cocks of Jal/Jaguar/ESS ESS as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) diameter C.P. brass angle valve of Jal/Jaguar/ESS ESS or its equivalent without nuts and pipe complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing brass full way valve with wheel 15mm (fifteen milimeter) nominal bore complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing brass full way valve with wheel 20mm (twenty milimeter) nominal bore complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) nominal bore brass ball valve (horizontal plunger type) high pressure with polythene plastic floats of Jal/Jaguar/ESS ESS or its equivalent. as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing ISI marked PVC connection pipe with brass union 450mm (four hundred fifty millimeter) long and 15mm (fifteen millimeter) dia noiminal bore complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and placing water tank make P.V.C. SINTEX/Supreme/Finolex (tripple layer) having capacity of 1000 (One thousand) litre each tank with necessary fittings including over flow pipe scour pipe etcetera and pads required for in let and out let and ball valve with cover and locking arrangements complete in all respect within all leads, lifts of materials and other incidentals

Constructing of manhole with RCC top slab in 1:2:4 mix ( one cement; two sand; four graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 ( one cement isto four sand isto eight graded stone aggregate 40mm nominal size) in side plastering 15mm ( fifteen milimetre ) thick with cement mortar 1:3 (one cement; three sand) finished with a floating coat neat of net cement and making channels in cement concrete 1:2:4 ( one cement ; two sand; four graded stone aggregate 20mm nominal size) finished smooth including curing and testing Inside size 800x800 and 500mm and internal diamensions total weight of cover and frame to be not less than 38 kg ( weight of cover 23kf and weight of frame 15kgs. with 300mm ( three hundred milimeter thick walls of square rubble masonarywith hard stone of approved quality in cement mortor 1:3 ( one cement isto three sand).as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing Plastic seat solid type and cover of Hindware/Cera/Jaguar and as per specification and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government. 150 mm dia ( one hundred fifty milimeter)

Providing and fixing Chromium plated Jet pressure of Jaguar/Jal/ ESS ESS and as per specification and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government. 150 mm dia ( one hundred fifty milimeter)

Providing and fixing 15mm nominal bore PTMT push cock tap as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government. 150 mm dia ( one hundred fifty milimeter)

Providing and fixing 32mm (thirty two millimeter) diameter C.P. brass waste of Jaguar/Jal/ ESS ESS for wash basin or sink as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing PVC Single equal branch of Supreme/Finolex/Prince and as per specification and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government. 150 mm dia ( one hundred fifty milimeter)

Providing and fixing PVC Single equal branch of Supreme/Finolex/Prince and as per specification and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government. 110 mm dia ( one hundred ten milimeter)

Providing and fixing P.V.C.double equal branch with oval access door of Supreme/Finolex/Prince as per specification and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government. 110 mm dia ( one hundred ten milimeter) 150mm dia one hundred fifty milimeter)

Providing and fixing P.V.C.double equal branch with oval access door of Supreme/Finolex/Prince as per specification and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government. 110 mm dia ( one hundred ten milimeter) 110mm dia (one hundred ten milimeter)

Constructing manhole with RCC top slab in cement concrete 1:2:4 ( one cement; two sand; four graded stone aggregate 20mm (Twenty millimeter) nominal size) mix foundation concrete 1:4:8 (one cement; four sand, eight graded stone aggregate 40mm (forty millimeter) nominal size) in side plastering 15mm (fifteen millimeter ) thick with cement mortar 1:3 (one cement; three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 ( one cement ; two sand; four graded stone aggregate 20mm (twenty millimeter) nominal size) finished smooth complete including curing and testing. ii) inside size 800 x 800mm (eight hundred into eight hundred millimeter ) and upto any depth including C.I. cover with frame (light duty single seal pattern-I) 455 x610mm (Four hundred fifty five into six hundred ten millimeter) internal diamensions total weight of cover and frame to be not less than 38 Kg (Thirty eight kilogramme) (Weight of cover 23 Kg (Twenty three kilogramme) and weight of frame 15 Kg (Fifteen kilogramme) with 300mm (three hundred millimeter) thick walls of square rubble masonry coursed with hard stone of approved quality in cement mortar 1:3 (One Cement : three Sand) complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government.

Construction of brick masonry chambers for under ground C.I. inspection chamber and bends with second class common burnt clay building bricks in cement mortar 1:5 (one cement; five sand) C.I. cover with frame (light duty) 350mm x 610mm( three hundred fifty five millimeter into six hundred ten millimeter) internal diamensions total weight of cover and frame to be not less than 38 kg. (thirty eight kilogramme) (weight of cover 23kg. (twenty three kilogramme) and weight of frame 15 kg. (fifteen kilogramme) with RCC top slab in cement concrete 1:2:4 ( one cement; two sand; four graded stone aggregate 20mm (twenty millimeter ) nominal size) foundation concrete 1:5:10 ( one cement : five sand : ten graded stone aggregate 40mm (forty millimeter) nominal size) inside plaster 15mm(fifteen millimeter) thick with cement mortar 1:3 ( 1 cement : 3 sand ) finished smooth with a floating coat of neat cement on walls and bed concrete inside dimensions 455x610x450mm( four hundred fifty five into six hundred ten into four hundred fifty millimeter) deep single pipe line complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and laying cement concrete 1:5:10 (one cement isto five sand isto ten graded stone aggregate 40mm (forty millimeter) nominal size) bedding for PVC/ stone ware pipes of internal diametre 150mm (one hundred fifty millimeter including necessary form work and curing complete and carriage of material with all leads , lifts and other incidential as per HPPWD specifications or as directed by the Engineer-in-Charge. The rate is inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing 100mm (One hundred millimeter) nominal size C.I. sluice valve (with hand wheel) as per IS-780-1984 Class-I upto 300mm (three hundred millimeter) diameter including brass spindle as per IS:2906 class-II for diameters more than 300mm (three hundred millimeter) complete with bolts, nuts and rubber washers complete The tail pieces if required shall be measured and paid for separately) as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing vitreous china bowl pattern urinal of Hindware/Cera/Jal/Jaguar of snow white shade including connection the urinal with waste pipe by means of white lead mixed with chopped hemp flat back type of size 33x31x42cm (thirty three into thirty one into forty two centimetre) including carriage of materials within all leads, lifts and other incidentals as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge. The rate is including of all type of taxes imposed by the Government.

Providing and fixing vitreos China urinal flat back No. 5001 size ( 63.2 x39.5x 42cm) (sixty three point two into thirty nine into point five into forty two centimetre) of snow white shade of CERA / HINDWARE/Jaguar/Jal in General Toilet as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge. The rate is including of all type of taxes imposed by the Government.

Providing and fixing composite end seal compression fittings of kitee as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc within all leads, lifts of materials and other incidentals equal Tee 1620 (20mm dia) ( twenty milimetres) as per entire satisfaction and direction of the Engineer-in-Charge. The rate is including of all type of taxes imposed by the Government.

Providing and fixing composite end seal compression fittings of Kitee as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc within all leads, lifts of materials and other incidentals Female elbow 1620x20mm ( one thousand six hundred twenty into twenty milimetres ) thread as per entire satisfaction and direction of the Engineer-in-Charge. The rate is including of all type of taxes imposed by the Government.

Providing and fixing composite end seal compression fittings of Kitee as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc within all leads, lifts of materials and other incidentals female branch Tee 1620x1620x20mm thread ( one thousand six hundred twenty into one thousand six hundred twenty into twenty milimetres ) thread as per entire satisfaction and direction of the Engineer-in-Charge. The rate is including of all type of taxes imposed by the Government.

Providing and fixing composite end seal compression fittings of Kitee as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc within all leads, lifts of materials and other incidentals Male thread connector 1620x20mm ( one thousand six hundred twenty into twenty milimetres ) thread as per entire satisfaction and direction of the Engineer-in-Charge. The rate including of all type of taxes imposed by the Government.

Providing and fixing composite end seal compression fittings of kitee as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc within all leads, lifts of materials and other incidentals Female thread connector 1620 x 20mm thread as per entire satisfaction and direction of the Engineer-in-Charge. The rate is including of all type of taxes imposed by the Government.

Providing and fixing composite end seal compression fittings of kitee as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc within all leads, lifts of materials and other incidentals Reducer 1620 (20mm dia)( twenty milimetres ) as per entire satisfaction and direction of the Engineer-in-Charge. The rate is including of all type of taxes imposed by the Government.

Providing and fixing composite end seal compression fittings of kitee as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc within all leads, lifts of materials and other incidentals Coupler 1620x1216( one thousand six hundred twenty into one thousand two hundred sixteen milimetres ) as per entire satisfaction and direction of the Engineer-in-Charge. The rate including of all type of taxes imposed by the Government.

Providing and fixing composite end seal compression fittings of kitee as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc within all leads, lifts of materials and other incidentals Reducing Tee 1620xAll branch as per entire satisfaction and direction of the Engineer-in-Charge. The rate is including of all type of taxes imposed by the Government.

Providing and fixing Division Plate for Urinals Size 600x300 ( six hundred into three only ) vitreos China of Cera/Hindware as per entire satisfaction and direction of the Engineer-in-Charge. The rate including of all type of taxes imposed by the Government.

Providing and fixing vitreos chiana pedestal for wash basin of Hindware/Crea/Jaguar of snow white shade and as per entire satisfaction and direction of the Engineer-in-Charge. The rate is including of all type of taxes imposed by the Government.

Providing and fixing C.P. bras flush pipe spreaders for urinal 15mm nominal bore of Jel/Jaguar/ESS ESS and as per entire satisfaction and direction of the Engineer-in-Charge. The rate is including of all type of taxes imposed by the Government.

Providing and fixing vitreos China urinal flat back large No. 2851 size 33x31x42 cms ( thirty three into thirty one into forty two only ) of snow white shade and as per entire satisfaction and direction of the Engineer-in-Charge. The rate is including of all type of taxes imposed by the Government.

Nishchal Mahajan

RAKESH RANA

ANIL MAHAJAN