Construction of 10.37 mtrs. span RCC slab bridge double lane over Parla Nallah on H.S.T.M. road at RD 59/325 in Tehsil Palampur Distt. Kangra (H.P.) (Under CRF)

Amount

Earth work in excavation of foundations and trenches etc. for structure (bridge) in all kinds of classiification of soil viz, pick work, pick jumper work, pick jumper blasting works, jumper blasting work, hard and soft rock including chiselling and doing work in saturated soil including de-watering, shoring, shuttering, strutting and pumping or bailing out water (Surface and Sub soil water) upto any depth, stacking the excavated material clear from the edge of the excavation as per the direction of Engineer-in-Charge and then refilling the trenches in 250mm ( Two hundred fifty milimetre) thick compacted layers, ramming, watering etc. and dressing of sides bottom etc. and then disposing of all surplus excavated soil as per drawing and MORTH technical specification clause 304 including carriage of materials within leads and lifts of material and other incidental. The rate is including octroi,royality, Malkana, toll tax Sale Tax, GST or other taxes imposed by the government.

Providing and laying mechanically mixed and vibrated concrete for plain/reinforced concrete in open foundations for all types of structure complete, plain cement concrete grade M-10 (M-Ten) using cement contents at the rate of 250 Kg. Per Cubic metre with graded crushed stone aggregate 40 mm (forty milimetre) nominal size on ground or under water including curing complete including pumping or bailing out water , dewatering and removal of slush as required at site which may arise at the time of laying concrete in all heights/depths including the cost of form work as per drawings and MORTH technical specifications section 500, 1700 and 2100 as per the directions of Engineer-in-Charge including carriage of material within all leads and lifts and other incidentals. The rate is including octroi,royality, Malkana, toll tax Sale Tax, GST or other taxes imposed by the government.

Providing and laying mechanically mixed and vibrated concrete for reinforced concrete in sub structure for all types of structure of reinforced cement concrete grade M-25(M Twenty five) design mix with minimum cement contents at the rate of 400 Kg. (Four hundred kilogram) per cubicmetre using 20mm (Twenty milimetres) nominal size graded crushed stone aggregate and curing complete in sub structure including cost of form work as per drawings and MORTH technical specifications section 1500, 1700 & 2200 and as per the directions of Engineer-in-Charge including carriage of material within all leads and lifts and other incidentals and to the entire satisfaction of the Engineer-in-Charge .The rate is including octroi,royality, Malkana, toll tax Sale Tax, GST or other taxes imposed by the government.

Supplying, fitting and placing (Fe-500) HYSD bar reinforcement in Sub Structure complete as per drawings and MORTH technical specifications section 1600 & 2200 including cost of binding wire cutting, bending, binding and placing in position complete in all respect including carriage of materials with in all leads, lifts and other incidental . The rate is including octroi,royality, Malkana, toll tax Sale Tax, GST or other taxes imposed by the government.

Providing weep holes in Brick masonry/stone masonry/Plain/Reinforced concrete abutment, wing wall/return wall with 100 mm (One hundred milimetre) diametre AC pipe, extending through the full width of the structure with slope of 1(V) :20(H) towards draining face complete as per drawing and MORTH Technical specifications clause 2706 as per directions of Engineer-in-Charge including carriage of material witin all leads and lifts and other incidental .The rate is including octroi,royality, Malkana, toll tax Sale Tax, GST or other taxes imposed by the government.

Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in MORTH technical specifications section 2200 to a thickness of not less than 600mm (Six hundred milimetres) with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and MORTH technical specificaion clause 710.1.4 of IRC : 78 including carriage of materials with in all leads, lifts and other incidental . The rate is including octroi,royality, Malkana, toll tax Sale Tax, GST or other taxes imposed by the government.

Providng and laying mechnically mixed and vibrated concrete for reinforced cement concrete in sub structure complete as per drawing and MORTH technical spefication section 1500, 1700 & 2200 cement concrete grade M-30 (M-Thirty) design mix with minimum cement contents of 407 Kg. (Four hundred seven kilogram) per cubic metre by using concrete mixer and vibrator including curing complete using crushed stone aggregate 20mm (Twenty milimetres) nominal size including centring and shuttering and excluding reinforcement and as per the direction of the Engineer -in-Charge including carriage of materials within all leads and lift of material .The rate is including octroi,royality, Malkana, toll tax Sale Tax, GST or other taxes imposed by the government.

Providing and laying mechnically mixed and vibrated concrete for reinforced cement concrete in super-structure Grade M-30 (M- Thirty) design mix using cement contents not less than 407 Kg. (Four hundred seven kilogram) per cubicmetre with 20mm (Twenty milimetre) nominal size graded crushed stone aggregate including form work in all height/ depth and curing complete as per drawings and technical specifications section 1500, 1700 & 2300 including carriage of material within all leads and lifts and other incidentals. The rate is including octroi,royality, Malkana, toll tax Sale Tax, GST or other taxes imposed by the government.

Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and MORTH technical specifications section 1600 and 2300 including cutting, bending, binding and placing in position complete in all respect including cost of binding wire as per the direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidental . The rate is including octroi,royality, Malkana, toll tax Sale Tax, GST or other taxes imposed by the government.

Providing and laying mechanically mixed and vibrated concrete for reinforced concrete for all types of structure of reinforced cement concrete grade M-30 (M Thirty) design mix with minimum cement contents at the rate of 407 Kg. (Four hundred seven kilogram) per cubicmetre with 20mm (Twenty milimetre) nominal size graded crushed stone aggregate including curing complete, pumping or bailing out water, dewatering and removal of slush as required at site which may arise at the time of laying concrete complete for all heights/depths including cost of form work and reinforcment complete in Approach slab as per drawings and MORTH technical specifications section 1500, 1600 and 2700 and as per the directions of Engineer-in-Charge including carriage of material within all leads and lifts and other incidentals and to the entire satisfaction of the Engineer-in-Charge .The rate is including octroi,royality, Malkana, toll tax Sale Tax, GST or other taxes imposed by the government.

Providing and laying mechanically mixed and vibrated concrete for plain concrete for all types of structure complete for (PCC) plain cement concrete grade M-15 (M Fifteen) grade levelling course below approach slab complete including curing complete including pumping or bailing out water ,dewatering and removal of slush as required at site which may arise at the time of laying concrete for all heights/depths including cost of form work as per drawings and MORTH technical speficiation section 1700, 2700 as per the directions of Engineer-in-Charge including carriage of material within all leads and lifts and other incidentals and entire satisfaction of the Engineer-in-Charge .The rate is including octroi,royality, Malkana, toll tax Sale Tax, GST or other taxes imposed by the government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete design mix to obtain the Minimum compressive strength of grade M-30 (M- Thirty) grade with minimum cement contents at the rate of 407 Kg. (Four hundred seven kilogram) per cubicmetre and 20mm (Twenty milimetre) nominal size graded crushed stone aggregate in superstructure as per drawings and technical specification including the cost of form work and reinforcement for reinforced concrete work in wearing coat laid in camber/slopes and curing complete as per drawings and technical speficiation section 2700 including hauling of materials in all kinds of leads, lifts and other incidentals .The rate is including octroi,royality, Malkana, toll tax Sale Tax, GST or other taxes imposed by the government.

Construction of precast RCC railing of M-30 (M - Thirty) Grade,concrete design mix including the cost of form work and reinforcement and constructing true to line and grade, tolerance of vertical railing post not exceed 1 in 500,( One in five hundred) centre to centre spacing between vertical post not to exceed 2000 mm (Two thousand milimetre) , leaving adequate space between vertical post for expansion, complete as per drawings and MORTH technical specifications section 2700 including carriage of materials with in all leads, lifts and other incidental . The rate is including octroi,royality, Malkana, toll tax Sale Tax, GST or other taxes imposed by the government.

Providing and filling joint sealing compound as per drawings and technical specifications with coarse sand and 6% (Six percent) bitumen by weight as per specification and the direction of the Engineer -in-Charge including carriage of materials within all leads and lift and other incidental.The rate is including octroi,royality, Malkana, toll tax Sale Tax, GST or other taxes imposed by the government.

Providing and fixing drainage spouts complete with 100mm (One hundred milimetres) diametre galvanised mild steel down pipe corrosion resistant structural steel grating complete as per drawing and technical specifications Clause 2705 and as per the direction of the Engineer -in-Charge including carriage of materials within all leads and lift and other incidental.The rate is including octroi,royality, Malkana, toll tax Sale Tax, GST or other taxes imposed by the government.

Earthwork in excavation in all types of road structures and all classification of soil comprising of ordinary soil soft Rock,Hard rock, chisseling/wedging out of rocks (where blasting is prohibited ) for structures such as retaining walls, Breast walls,culverts ,drains,and parapets etcetra as per drawing and technical specifications Clause 304 and as per the direction of the Engineer -in - charge including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal of materials upto any lead and any lift , including dressing of sides and bottom and backfilling in trenches with excavated suitable approved material to the origional surface in layers not exceeding 150mm (one hundered and fifty millimetres) compacted thickness including shoring and strutting and pumping and bailing out water (surface and sub soil water) upto any depth and any quantum of water including cleaning of slush which may arise out during dewatering as per the direction of the Engineer - in Charge including carriage of materials within all leads and lifts and other incidental. The rate is including octroi,royality, Malkana, toll tax Sale Tax, GST or other taxes imposed by the government.

Providing and fixing weep holes in Brick masonry/stone masonry/Plain/Reinforced concrete abutment, wing wall/return wall with 100 mm (One hundred milimetre) dia PVC pipe, extending through the full width of the structure with slope of 1(V) :20(H) towards drawing face complete as per drawing and MORTH Technical specifications clause 2706 as per directions of Engineer-in-Charge including carriage of material witin all leads and lifts and other incidental .The rate is including octroi,royality, Malkana, toll tax Sale Tax, GST or other taxes imposed by the government.

Back filling behind abutment wing wall and return wall complete as per drawing and MORTH technical specifications section 2200 and clause 710.1.4 of IRC : 78 and as per direction of Engineer in Charge including carriage of materials with in all leads, lifts and other incidental . The rate is including octroi,royality, Malkana, toll tax Sale Tax, GST or other taxes imposed by the government.

Construction of embankment for road way with approved materials obtained from borrowpits or other sources in layers of suitable thickness not exceeding 200mm (Two hundred milimetre) thick each layers and compacted with 80-100 (Eighty - Hundred) K.N static/ vibratory road roller to meet the requirement of table 300.1 and 300.2 of to lines, grades, levels and cross sections as per Drawings and MORTH Technical specification clause 305 and other relevent clauses including preparation of foundation for embankment in all kinds and classification of soils including saturated soil and dewatering/ bailing out of water where ever required including handling of material for construction of embankments within all leads and lifts. The rate is including octroi,royality, Malkana, toll tax Sale Tax, GST or other taxes imposed by the government.

Providing and erecting a "W" metal beam crash barrier comprising of 3mm thick corrugated sheet metall beam rail. 70cm. above road/ ground level, fixed on ISMC series channel vertical posts, 150x75x5mm spaced 2m centre to centre, 1.8m high 1.1m below ground/ road level, all steel parts and fitmets to galvanized by hot dip process, all fittings to conform to IS: 1367 and IS 1364, metal beam rail to be fixed on the veritical post with a spacer of channel section 150x75x5mm, 330mm long complete as per drawing and MORTH technical specificaion clause 811 including carriage of materials with in all leads, lifts and other incidental . The rate is including octroi,royality, Malkana, toll tax Sale Tax, GST or other taxes imposed by the government.

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 as per MORTH Technical Specification section 400 including carriage of materials with in all leads, lifts and other incidental . The rate is including octroi,royality, Malkana, toll tax Sale Tax, GST or other taxes imposed by the government.

Construction of granular sub- base by providing course graded materials, spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotavator at OMC and compacting with vibratory roller to achieve the desired density complete as per drawing and MORTH specification section 400 including carriage of material witin all leads and lifts and other incidental .The rate is including octroi,royality, Malkana, toll tax Sale Tax, GST or other taxes imposed by the government.

Providing and laying, 63 to 45mm ( Sixty three to forty five milimetre) nominal size stone aggregate, spreading and compacting by mechanical means to water bound macadam specification grading -1 including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 (Eighty to hundred) KN static roller in stages to proper grade and camber, applying and brooming, stone screening type B of size 11.2 mm (Eleven point two milimetrs) nominal size at the rate of 0.20cum, (Zero point two zero cubicmetre) and binding material at the of 0.06 cubic metre per ten square metre to fill-up the interstices of coarse aggregate, watering and compacting to the required density as per MORTH technical specification Clasue 404 as per directions of Engineer-in-charge including carriage of materials, within all leads, lifts and other incidentals.The rate is including octroi,royality, Malkana, toll tax Sale Tax, GST or other taxes imposed by the government.

Providing, laying, spreading and compacting by mechanical means stone aggregates of sizes 53 mm to 22.4 mm (fifty three milimetre to twenty two point four milimetre) to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 (Eighty to hundred) KN static roller in stages to proper grade and camber, applying and brooming, stone screening type B of size 11.2 mm (Eleven point two milimetre) nominal size at the rate of 0.18 cum (Zero point one eight cubic metre) to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading - 2 as per Technical Specification Clause 404 and as per directions of Engineer-in-charge including carriage of material within all leads lifts and other incidentals. The rate is including octroi,royality, Malkana, toll tax Sale Tax, GST or other taxes imposed by the government.

Providing and applying primer coat with Bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface with hydraulic brooms and spraying primer at the rate of 0.85 Kg. (Zero Point eight five Kilogram) per square metre using mechanical means as per MORTH technical specification clause 502, as per directions of Engineer-in-charge including carriage of material within all leads lifts and other incidentals. The rate is including octroi,royality, Malkana, toll tax Sale Tax, GST or other taxes imposed by the government.

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.275 Kg. (Zero decimal two seven five Kilogram) per Square metre on the prepared granular surface treated with primer cleaned with Hydraulic broom as per MORTH technical specification clause 503, as per directions of Engineer-in-charge including carriage of material within all leads lifts and other incidentals.The rate is including octroi,royality, Malkana, toll tax Sale Tax, GST or other taxes imposed by the government.

Providing and laying 50 mm (Fifty millimetre) thick bituminous macadam with 40-60 TPH hot mix plant producing an average output of 50 (Fifty) tonnes per hour using crushed aggregates of grading-II 19 mm(Ninteen millimetre) nominal size premixed with bituminous binder VG-10 (VG Ten) grade at the rate of 3.3%(three point three percent) of mix by weight as per table 500.30 and 500.4 transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per MORTH techinical specification Clause 504 including hauling of material in all leads and lifts by all modes of transportation and as per the direction of the Engineer - In -Charge. The rate is including octroi,royality, Malkana, toll tax Sale Tax, GST or other taxes imposed by the government.

Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes ( Seventy five Tonnes) per hour using crushed aggregates of specified grading, premixed with bituminous binder VG -10 (VG - ten) at the rate 5.4 to 5.6 (Five point four to five point six) percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tendem rollers to achive the desired compaction as per MORTH specification clause 507 in all respect as per the direction of Engineer- in -charge, including entire carriage of materials, within all leads, lifts other incidentals. The rate is including octroi,royality, Malkana, toll tax Sale Tax, GST or other taxes imposed by the government.

Providing and laying hot applied thermoplastic road marking paint component minimum 2.5mm (two point five millimetre) thick including reflectorising glass beads @ 250 grams (Two hundred fifty gram) per square metre area, thickness of 2.5mm (Two decimal five millimetre) is exclusive of surface applied glass beads as per IRC:35 as per MORTH technical specification clause 803. The finished surface to be level, uniform and free from streaks and holes including carriage of materials machinery and other incidentals charges by mechanical transport in all leads and lifts as per direction of Engineer-in-Charge. The rate is including octroi,royality, Malkana, toll tax Sale Tax, GST or other taxes imposed by the government.

YUDHVIR SINGH

SANJEEV DHADWAL