Construction of Taluka Panchayat Office Building at Dediapada Dist-Narmada

Name of Work: Construction of Taluka Panchayat Office Building @ Dediyapada, Dist. Narmada.

BILL OF QUANTITIES

Item Description Qty. Unit Rates Amount

Excavation for foundation upto 1.50 mt depth including sorting out and stacking of useful

materials and disposing the excavated stuff upto 50 mt lead (A) Loose or soft soil

Excavation for foundation 1.50 mt to 3.00 mt depth including sorting out and stacking of

useful materials and disposing the excavated stuff upto 50 mt lead (B) Dense or Hard Soil

Excavation for foundation 3.00 mt to 5.00 mt depth including sorting out and stacking of

useful materials and disposing the excavated stuff upto 50 mt lead (C) Hard Murrum

Excavation for foundation 5.00 mt to 6.00 mt depth including sorting out and stacking of

useful materials and disposing the excavated stuff upto 50 mt lead (C) Hard Murrum

Filling in foundation and plinth with sand in layers of 20 cm. Thickness including watering

ramming and consolidating etc. complete.

Filling available excavated Earth (Excluding Rock ) in trench plinth side of foundation . in

6 layer not excluding 20 cm in depth consolidation each deposited layer by ramming and 797.00 Cu.M. 137.47

watering etc. complete

Carrying out plinth treatment to post construction / existing structure by spraying chemical

solution for termite control treatment including labour and material consistent with I.S.I

specification. Using Chlordane and Chiorpurfiles 20 EC. As Per 6131_paret-II Concentration

Weight one percent is recommended i.e. one litre 20 EC chemical emulsion with 19 liter give

1 % concentration inclusive of one litre chemical emulsion application at the rate of 5 Litre

chemical / Sqm of surface is recommended as per I.S

Providing and laying controlled cement concrete M-150 and curing complete including the

8 cost of form work and reinforcement for reinforced concrete work in : (a) Foundations, 72.00 Cu.M. 3,792.73

footings Bases of columns and the like and Mass concrete.

Providing and laying controlled cement concrete M-250 and curing complete including the

9 cost of form work but excluding the cost of reinforcement for reinforced concrete work in 172.00 Cu.M. 4,473.29

foundation footings, base of columns and mass concrete.

Providing and laying controlled cement concrete M-250 and curing complete including the

10 cost of form work but excluding the cost of reinforcement for reinforced concrete work in 30.00 Cu.M. 7,619.44

Columns, pillars posts and struts G.FLOOR

Providing and laying cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 Crushed stone

11 aggregates 40 mm. nominal size) and curing complete excluding cost of from work in :(a) 321.50 Cu.M. 3,063.66

Foundation and plinth

Providing and laying controlled cement concrete M-200 and curing complete including the

12 cost of form work but excluding the cost of reinforcement for reinforced concrete work in 40.00 Cu.M. 7,557.83

Columns, pillars posts and struts G.FLOOR

Providing and laying controlled cement concrete M-200 and curing complete including the

13 cost of form work but excluding the cost of reinforcement for reinforced concrete work in 38.00 Cu.M. 7,595.91

Columns, pillars posts and struts For First floor

Providing and laying controlled cement concrete M-200 and curing complete including the

14 cost of form work but excluding the cost of reinforcement for reinforced concrete work in 16.00 Cu.M. 7,633.98

Columns, pillars posts and struts For Second floor

Providing and laying controlled cement concrete M-250 and curing complete including the

15 cost of form work but excluding the cost of reinforcement for reinforced concrete work in 94.00 Cu.M. 5,682.26

Providing and laying controlled cement concrete M-150 and curing complete including the

16 cost of form work but excluding the cost of reinforcement for reinforced concrete work in 84.00 Cu.M. 3,892.54

Providing and laying controlled cement concrete M-200 and curing complete including the

17 cost of form work but excluding the cost of reinforcement for reinforced concrete work in 80.00 Cu.M. 6,086.26

BEAMS Ground Floor

Providing and laying controlled cement concrete M-200 and curing complete including the

18 cost of form work but excluding the cost of reinforcement for reinforced concrete work in 76.00 Cu.M. 6,124.34

BEAMS for First Floor

Name of Work: Construction of Taluka Panchayat Office Building @ Dediyapada, Dist. Narmada.

BILL OF QUANTITIES

Item Description Qty. Unit Rates Amount

Providing and laying controlled cement concrete M-200 and curing complete including the

19 cost of form work but excluding the cost of reinforcement for reinforced concrete work in 7.00 Cu.M. 6,162.41

BEAMS for Second Floor

Providing and laying controlled cement concrete M-200 and curing complete including the

20 cost of form work but excluding the cost of reinforcement for reinforced concrete work in 3.60 Cu.M. 7,665.90

Lintels Ground Floor

Providing and laying controlled cement concrete M-200 and curing complete including the

21 cost of form work but excluding the cost of reinforcement for reinforced concrete work in 3.00 Cu.M. 7,703.98

Lintels First Floor

Providing and laying controlled cement concrete M-200 and curing complete including the

cost of form work & finishing exposed surface with cement mortar 1:3 ( 1 cement : 3 coarse

sand} but excluding the cost of reinforcement for reinforced concrete work in Chhajjas

Providing and laying controlled cement concrete M-200 and curing complete including the

cost of form work & finishing exposed surface with cement mortar 1:3 ( 1 cement : 3 coarse

sand} but excluding the cost of reinforcement for reinforced concrete work in Chhajjas

Providing and laying controlled cement concrete M-200 and curing complete including the

cost of form work & finishing exposed surface with cement mortar 1:3 ( 1 cement : 3 coarse

sand} but excluding the cost of reinforcement for reinforced concrete work in Chhajjas

Providing and laying controlled cement concrete M-200 and curing complete including the

25 cost of form work but excluding the cost of reinforcement for reinforced concrete work in 95.50 Cu.M. 6,233.72

SLAB for Ground Floor

Providing and laying controlled cement concrete M-200 and curing complete including the

26 cost of form work but excluding the cost of reinforcement for reinforced concrete work in 80.00 Cu.M. 6,271.80

SLAB for First Floor

Providing and laying controlled cement concrete M-200 and curing complete including the

27 cost of form work but excluding the cost of reinforcement for reinforced concrete work in 6.00 Cu.M. 6,309.87

SLAB for Second Floor

Providing and laying controlled cement concrete M-200 and curing complete including the

28 cost of form work but excluding the cost of reinforcement for reinforced concrete work in 5.00 Cu.M. 7,031.62

STAIRCASES Ground Floor

Providing and laying controlled cement concrete M-200 and curing complete including the

29 cost of form work but excluding the cost of reinforcement for reinforced concrete work in 5.00 Cu.M. 7,069.70

STAIRCASES First Floor

Providing Fe -500D TMT Bar reinforcement for RCC work including bending binding and

placing in position up to floor two level for all floor

Providing and laying Brick work using common Brunt clay building bricks having crushing

31 strength not less than 35 Kg./Sq.cm.. In foundation and plinth in cement mortar 1:6 (1cement 284.00 Cu.M. 4,279.98

: 6 fine sand) (b) Conventional

Providing and laying Brick work using common Brunt clay building bricks having crushing

32 strength not less than 35 Kg./Sq.cm.. In super structure above plinth level upto floor two level 227.20 Cu.M. 4,568.40

in cement mortar 1:6 (1cement : 6 fine sand) (b) Conventional {Ground Floor }

Providing and laying Brick work using common Brunt clay building bricks having crushing

33 strength not less than 35 Kg./Sq.cm.. In super structure Above floor two level in cement 90.00 Cu.M. 4,611.18

mortar 1:6 (1cement : 6 fine sand) (b) Conventional {First Floor }

Providing and laying Brick work using common Brunt clay building bricks having crushing

34 strength not less than 35 Kg./Sq.cm.. In super structure above floor two level in cement 48.00 Cu.M. 4,653.95

mortar 1:6 (1cement : 6 fine sand) (b) Conventional {Second Floor }

Providing and laying Half brick masonry in common brunt clay building bricks having

35 crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse 154.00 Sq.Mt. 640.77

sand ) in foundation and plinth (B) Conventional

Name of Work: Construction of Taluka Panchayat Office Building @ Dediyapada, Dist. Narmada.

BILL OF QUANTITIES

Item Description Qty. Unit Rates Amount

Providing and laying Half brick masonry in common brunt clay building bricks having

36 crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse 259.00 Sq.Mt. 696.50

sand ) in super structure above plinth level GROUND FLOOR

Providing and laying Half brick masonry in common brunt clay building bricks having

37 crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse 319.00 Sq.Mt. 702.90

sand ) in super structure above Floor Two level FIRST FLOOR

Providing and laying Half brick masonry in common brunt clay building bricks having

38 crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse 27.00 Sq.Mt. 709.30

sand ) in super structure above plinth level Second FLOOR

Providing and fixing 50 mm thick Double shutter doors made from 5 x 10 cm Hollow box

type frame made out from 12 mm thick Water proof plywood, and 1 thick lamination over it

39 on both sides, Colour, pattern and design is to be approved by the Architech, Colour, pattern 20.00 Sq.Mt. 4,212.71

and design is to be approved by the Architect, with Stainless Steel handle size 60 Cm Long,

Tower Bolt size 25cm, Heavy Duty Floor spring & Heavy Stainless steel Aldrop as per detail.

Providing and fixing door having side hung single shutter having factory fabricated std.

Extruded aluminium colour anodized hollow section {Section 63.50 x 38 mm x 2.50 mm

thick } for door frame, hollow portion of door frame shall be filled with non teakwood wood,

with factory made 35 mm. Thick flush door both side pre laminated with 6 Lever Mortice

lock {Godrej or Equivalent), Door closers (Heavy type of 765 number) Hardwire or Everite

Prabhat or Equivalent., SS Aldrop, SS Handle size 30Cm Long, Tower Bolt size 15 cm etc. as

per detail colour & pattern apporoved by this office including necessary anodized alluminum

fixtures and fastenings.

Providing and fixing FRP frame size 100 X 50 mm and 28 mm thick FRP shutter with

depressed panel shutter having reinforcement on sides and edges and in GEL coat finish. The

core of shutter is to be filled up with injected fibre extinguishing grade polyurethane foam

41 done in situ along with embedded wooden pieces for stiffening and also for taking hinges and 33.00 Sq.Mt. 2,377.76

fixtures. The whole FRP frame and shutter is to be water proof, weatherproof, termite proof

and resistance to mild acid/ Alkali resistance including S.S. hinges with necessary screws and

alluminium fixtures and fastening.

Providing and fixing window having extruded alluminum Colour anodized section frame

main outer size 63.50 x 38.10 x 1.95 mm(of Jindal Section no:4605,@ Wt 1.094 Kg / Rmt),

horizontal two track member size 61.85 mm x 31.75 mm x 1.20mm (of Jindal Section no:

8687 @ wt. of 0.695 Kg/mt), vertical member of size 61.85 mm x 31.75mm x 1.30 mm (of

Jindal Section no:8758 @ wt. of 0.0.659 Kg/mt) with sliding shutters of horizontal member

size 40mm x 18mm x 1.29mm (of Jindal Section no:8949 @ wt. of 0.456Kg/mt), vertical

member of size 40mm x 18mm x 1.29mm (of Jindal Section no:8947 @ wt. of 0.456Kg/mt/

Section 8948, @ Wt. 0.457 Kg/mt) with 5 mm thick transparent bronze colour tinted float

glass with powder coated alluminum fittings and fixtures and transparent silicon sealant glass

fixing to frame as per details etc complete for window.

Providing and fixing window having extruded alluminum Colour anodized section frame

main outer size 95mm x 24mm x 1.17mm (of Jindal Section no:2459 @ wt. of 0.738 Kg/mt),

horizontal Three track member size 92mm x 31.75mm x 1.30mm (of Jindal Section

no:8688,@ Wt.1.07 Kg/mt), vertical member of size 92mm x 31.75mm x 1.50mm (of Jindal

43 Section no:8933,@ Wt. 1.06 Kg/mt) with sliding shutters of horizontal member size 40 mm x 87.00 Sq.Mt. 1,583.95

18mm x 1.29mm (of Jindal Section no:8947@ wt. of 0.456 Kg/mt), vertical member of size

40mm x 18mm x 1.29 mm (of Jindal Section no:8949 @ wt. of 0.456Kg/mt/ with 5 mm thick

transparent bronze colour tinted float glass with powder coated alluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame as per details etc

Providing and fixing colour anodised Alluminium sectional ventilators using section 50.80 x

25.40 {Jindal Section No. 14003 Wt 0.791 Kg /Rmt.} 3 mm thick Bjarai Figured glass

Adjustable Glass louvers fixed in alluminum channel and including anodized aluminum

fixture and fastenings and hold fasting with coach bolts etc complete. {Colour as directed by

Engineer in charge except black & Alluminum section shall be Jindal TATA, Balco or

equivalent brand }

Name of Work: Construction of Taluka Panchayat Office Building @ Dediyapada, Dist. Narmada.

BILL OF QUANTITIES

Item Description Qty. Unit Rates Amount

Providing and fixing colour anodised Alluminium sectional fixed glass windows using section

50.80 x 25.40 {Wt 0.772 Kg /Rmt. for One size groove and 0.760 Kg /Rmt. Both side

Groove } Fully glazed 5 mm thick transperant glass & 0.8mm th.alluminium glazing clips

45 and rubber bedding and including anodized aluminum fixture and fastenings and hold 27.00 Sq.Mt. 1,193.82

fasting with coach bolts etc complete. {Colour as directed by Engineer in charge except

black & Alluminum section shall be Jindal or equivalent brand and glass of Modiguard, AIS

or equivalent brand}

Providing and fixing Safety grills of required pattern for windows / Door using 16 mm dia

M.S polished bars and Rectangular CRC pipes of size 50 x 30 x 2mm at required spacing as

per design and hold fasting with coach bolts including one coat of primer and two coats of

matt finished oil painting etc complete.

Providing and laying RIVER FINISHED GRANITE stone slab 18 mm (Average) thick,

Machine cut, Free edges polished {Single piece not more than 150 cm } as per design incl.

47 Half round front edge & 1 cm nosing & necessary groove on trade of steps laid on 20 mm 108.00 Sq.Mt. 3,357.24

thick cement mortar 1:6 (1 -cement : 6 coarse sand ) jointed with grey cement slurry

including rubbing and polishing etc. complete

Providing and laying 60 cm X 60 cm Vitrified 8 mm thick tile flooring of approved brand,

over 20 mm {average} base of cement mortar 1:6 { 1 cement : 6 coarse sand} on new surface

48 or fixing on existing flooring by adhesive materials including dismantling of existing flooring 571.00 Sq.Mt. 1,521.95

and jointed with colour cement slurry including finished with flush pointing & cleaning the

surface etc. complete (LIGHT shade & 10% Dark Shade pattern as directed)

Providing and laying 60 cm X 60 cm Matt {GVT} Vitrified 8 mm thick tile flooring of

approved brand over 20 mm {average} base of cement mortar 1:6 { 1 cement : 6 coarse sand}

49 on new surface or fixing on existing flooring by adhesive materials including dismantling of 332.00 Sq.Mt. 1,472.91

existing flooring and jointed with colour cement slurry including finished with flush pointing

& cleaning the surface etc. complete (In two Colour, Shade and pattern as directed)

Providing and laying 30 cm X 30 cm Vitrified 8 mm thick tile flooring of approved brand

over 20 mm {average} base of cement mortar 1:6 { 1 cement : 6 coarse sand} on new surface

50 or fixing on existing flooring by adhesive materials including dismantling of existing flooring 46.00 Sq.Mt. 1,521.95

and jointed with colour cement slurry including finished with flush pointing & cleaning the

surface etc. complete {Shade & pattern as directed)

Providing and laying 30cm x 60 cm Vitrified granite tiles {Matched with flooring) 8mm

51 thick, of approved brand, in skirting risers of steps and dado on 10 mm. thick cement plaster 172.00 Sq.Mt. 1,195.02

1:3 (1 cement : 3 coarse sand) pointing in white cement and jointed with white cement slurry

Providing and laying ceramic tiles 30 cm x 60 cm size & 6 mm. Thick of approved brand in

52 skirting risers of steps and dado on 10 mm. Thick cement plaster 1:3 (1 cement : 3 coarse 187.00 Sq.Mt. 1,070.50

sand) pointing in white cement and jointed with white cement slurry.

Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm

length,30cm height and 15cm thick of M250 grade concret as per approved design and

including excavation for fixing in proper line and level,filling the joint with C:M 1:3

(1cement:3fine sand) etc complete.

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm

thick with grade of concrete M300 pnumatic compressed / vibrated mechanically and as per

54 approved design Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling and 784.00 Sq.Mt. 705.95

filling the joint with sand in proper line and level as per guidlines of IRC : SP 63-2018 etc.

Name of Work: Construction of Taluka Panchayat Office Building @ Dediyapada, Dist. Narmada.

BILL OF QUANTITIES

Item Description Qty. Unit Rates Amount

Providing and laying water proofing tretment with chaina mosaic tiles flooring over avg

mm C.C. 1:2:4 {1 Cement : 2 sand : 4 Kapachi / Gritt 6 to 12 mm size} bedding for

maintaining slope for plain and curve surface & 12 mm to 20 mm of broken piece of seramic

/ glazed tiles ( one for more color as directed ) to be laid over cement mortar bedding of C M

55 1:3 (1 cement : 3 sand ) containg one Kg of water profing materials per bag of O P C at plain 572.00 Sq.Mt. 1,089.79

or / and slops and to be tempered to bring mortar ceramic up to surface with using white

cement and colour pigment including rounding of junctions and extending them up to 15 cm

along the wall and curing with bends any pattens or design as per drawing and cleaning by

using oxalic acid etc complete.

Providing and laying Mirror polished Black Granite stone slab 18 mm (Average) thick for

stair steps and riser as per design incl. Half round both edges 10 mm thick cement mortar

56 1:3 (1 -cement : 3 coarse sand ) jointed with grey cement slurry including rubbing and 259.00 Sq.Mt. 3,509.75

polishing and providing necessary G.I. Fasteners, etc. complete For Doors / Windows sill &

Providing 15 mm thick Malaplaster plaster in single coat on brick / concrete wall for

57 interior plastering finished even and smooth (ii) Cement mortar 1:3 (1-cement, 3-sand) for 1504.00 Sq.Mt. 232.08

Providing 15 mm thick Malaplaster plaster in single coat on brick / concrete wall for

58 interior plastering finished even and smooth ( ii )Cement mortar 1:3 ( 1-cement , 3 - sand ) 1280.00 Sq.Mt. 256.55

for First Floor

Providing 15 mm thick Malaplaster plaster in single coat on brick / concrete wall for

59 interior plastering finished even and smooth ( ii )Cement mortar 1:3 ( 1-cement , 3 - sand ) 230.00 Sq.Mt. 281.01

for Second Floor

Providing 10 mm. Thick cement plaster in single coat for plastering on ceiling and soffits of

60 stairs upto floor two level and finished even and smooth in : (I) Cement mortar 1:3 (1 600.00 Sq.Mt. 177.34

cement : 3 sand) Ground Floor

Providing 10 mm. Thick cement plaster in single coat for plastering on ceiling and soffits of

61 stairs upto floor two level and finished even and smooth in : (I) Cement mortar 1:3 (1 577.00 Sq.Mt. 201.81

cement : 3 sand) First Floor

Providing 10 mm. Thick cement plaster in single coat for plastering on ceiling and soffits of

62 stairs upto floor two level and finished even and smooth in : (I) Cement mortar 1:3 (1 27.00 Sq.Mt. 226.27

cement : 3 sand) Second Floor

Providing and fixing 12 mm wide groove in plaster including finishing the same etc.

complete for all height.

Providing and fixing chicken mesh jali with square of 12.50 x 12.50 mm of 25 gauge at

64 junction the Brick masonary and reinforcement cement concrete member including fixing 310.00 Sq.Mt. 92.92

materials scaffolding labour etc. complete

Providing 20 mm thick cement plaster in single coat on brick / concrete wall for interior

plastering up to floor two level finished even and smooth ( ii ) Cement mortar 1:3 ( 1-cement

,3 - sand ) and mixing Recrone - S 5 waterproofing materials in cement mortar in proportion

recommended by the manufacturer for All Floor.

Applying two coats of acrylic lappy (putty) and two coats of primer of approved brand and

66 manufacture on new wall surface to give an even shade including thoroughly brushing the 4151.00 Sq.Mt. 40.59

surface free from mortar dropping and other foreign matter and sand papered smooth.

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on

67 wall surfaces to give an even shade including thoroughly brushing the surface free from 2960.00 Sq.Mt. 84.82

mortar dropings and other foreign matter and sand papered smooth

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on

68 ceilings and sloping roofs to give an even shade including thoroughly brushing the surface 1191.00 Sq.Mt. 90.48

free from mortar dropings and other foreign matter and sand papered smooth

Name of Work: Construction of Taluka Panchayat Office Building @ Dediyapada, Dist. Narmada.

BILL OF QUANTITIES

Item Description Qty. Unit Rates Amount

20 mm. Thick sand faced cement plaster on walls upto height 10 meters above ground level

consisting of 12 mm. Thick backing coat of C.M. 1:3 (1 cement : 3 sand) and 8 mm. Thick

finishing coat of C.M. 1:1 (1 cement : 1 sand) etc. complete and making groove as directed by

engineer in charge.

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give

70 an required shape even shade after thoroughly brushing the surface to remove all dirt, and 2350.00 Sq.Mt. 122.14

remains of loose powdered materials etc complete

Providing and fixing 110 cm high Stainless steel railing made from anticorrocive 304 grade S

S pipe of 50 mm dia (16Gauge) as hand rail with S S 304 grade Baluster of 38 mm dia

71 (16Gauge) as a vertical support fixed in RCC slab at 1.2m c/c including three horizontal S S 28.00 Rmt. 2,110.90

pipes of 25 mm dia (16Gauge) at eqal distance fixed by 18.75 mm dia (16Gauge) S S pipe

with baluster including accessories as per detailed drawing as directed etc. complete.

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the

72 wall with the help of clamp at every two metre C/C or shall be concealed as directed 60.00 Rmt. 72.65

including necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the

73 wall with the help of clamp at every two metre C/C or shall be concealed as directed 60.00 Rmt. 91.84

including necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the

74 wall with the help of clamp at every two metre C/C or shall be concealed as directed 30.00 Rmt. 148.12

including necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the

75 wall with the help of clamp at every two metre C/C or shall be concealed as directed 100.00 Rmt. 195.67

including necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing and fixing Heavy Handle valve of aprroved brand & follwing internal dia of Brass

including fixing in pipe lines etc.complete (A) 15 mm Dia

Providing and fixing Heavy Handle valve of aprroved brand & follwing internal dia of Brass

including fixing in pipe lines etc.complete (C) 25 mm Dia

Providing and fixing Heavy Handle valve of aprroved brand & follwing internal dia of Brass

including fixing in pipe lines etc.complete (E) 40 mm Dia

Providing and fixing Butterfly valve Butterfly valves IS 13095 with lSI mark PN 1.0 of

79 aprroved brand & follwing internal dia of Brass including fixing in pipe lines etc.complete 3.00 Nos. 2,408.85

Providing and fixing to wall, ceiling and floor galvanised mild steel tubes (Medium grade) of

80 the following nominal bore, tube, fittings and clamps included making good the wall, ceiling 30.00 Rmt. 608.35

and floor.(E) 40 mm.

Providing and fixing to wall, ceiling and floor galvanised mild steel tubes (Medium grade) of

81 the following nominal bore, tube, fittings and clamps included making good the wall, ceiling 30.00 Rmt. 401.95

and floor.(C) 25 mm.

Providing and fixing to wall, ceiling and floor galvanised mild steel tubes (Medium grade) of

82 the following nominal bore, tube, fittings and clamps included making good the wall, ceiling 40.00 Rmt. 252.49

and floor.(A) 15 mm.

Providing and fixing to wall ceiling floor 10.0 Kg. F/Cm2 working pressure polythene pipes

for soil waste and ventilating pipes of the following outside dia. low density, complete with

necessary fittings ,wall clamps etc including making good the wall ceiling and floor.(A)

Name of Work: Construction of Taluka Panchayat Office Building @ Dediyapada, Dist. Narmada.

BILL OF QUANTITIES

Item Description Qty. Unit Rates Amount

Providing laying and jointing in true line and level 110 diameter U.P.V.C. SWR Type B pipe

confirming to IS 13592-1992 with one end plain and other end socketed with rubbering, &

fitting conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe

shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of

PVC clamp of the size 110 mm diameter x 149 mm length x 145 mm high at every 2000 mm

centre to centre or shall be concealed in walls as directed including necessary fittings such as

bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

Providing laying and jointing in true line and level 160 diameter U.P.V.C. SWR Type B pipe

confirming to IS 13592-1992 with one end plain and other end socketed with rubbering, &

fitting conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe

shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of

PVC clamp of the size 110 mm diameter x 149 mm length x 145 mm high at every 2000 mm

centre to centre or shall be concealed in walls as directed including necessary fittings such as

bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

Providing and fixing PVC SWR Nahni Trap IS 14735 for drain - 100 mm diameter with jali

86 of the following nominal diameter of self cleansing design with C.I. screwed down or hinged 24.00 Nos. 600.23

grating including the cost of cutting and making good the walls.

Providing and fixing Screw down Quarter turn bib taps of following size (A) Brass chromium

plated screw down Bib tap (I) 15 mm dia

Providing and fixing Push Type bib taps of following size (A) Brass chromium plated Push

Type Bib tap (I) 15 mm dia

Providing and fixing CP brass Quarter turn pillar tap, capstan head screw down high pressure

with screw, shanks and back nuts (A) 15 mm dia

Providing and fixing wash basin with pedestal of std. Height with single hole for C.P. Pillar

cock 15 mm Heavy duty swan neck, with C.I or M.S brackets painted white including cutting

holes and making goods the same including. C.P. brass waste and waste pipes and bottaltrap

(A) Vitreous china. (II) Flat back washbasin 550 mm x 400 mm size (I) in colour

Provision and fixing water closet squatting Orissa type W.C. pan size 580mm integral

footrest and 100 mm P or S trap and in including 25 mm dia CP brass flush valve and GI

inlet connection etc. comp. (A) Vitreous china long pattern white or colour {Hindustan,

Cera, Parryware or equivalent }

Pro. & Fix. wash down water closet (European w. c .pan) with integral" p " or " s " trap and

PVC flushing cistern with fittings etc comp incl plastic sheet cover including jointing trap

with pipe in cm 1:1 and connecting cistern with closet & Jet spray heavy duty with S.S.

Braided hose 60 cm long (a ) Vitreous china in white or colour

Providing and fixing urinal of approved quality connecting the urinal with waste pipe, trap

93 etc. complete. (A) White earthen ware flat back or corner type size 430mm x 260mm x 350 4.00 Nos. 1,074.86

Providing and laying Both side mirror polished Green marble stone slab 20 mm (Average)

94 thick of approved quality incl. full moulded round front edge fixed in wall for partition and 3.00 Sq.Mt. 2,836.08

jointed with grey cement slurry including rubbing and polishing etc. complete

Providing erecting and fixing double coated PVC. (ISI) mark water tank of reqd capacity each

with all necessary fittings & connection etc. comp on terrace.

Providing and fixing 600 mm x 450 mm bevelled edge mirror of superior glass mounted on

96 6 mm thick A.C sheet or plywood sheet or PVC framing and fixed to wooden plugs with C.P 13.00 Nos. 859.41

brass screw and washers.

Providing and fixing C.P. brass towel rail complete with C.P. brass brackets fixed to wooden

plugs with cpbrass screws ( B ) 600 mm X 20mm size

Name of Work: Construction of Taluka Panchayat Office Building @ Dediyapada, Dist. Narmada.

BILL OF QUANTITIES

Item Description Qty. Unit Rates Amount

Providing and fixing S.W. Gully trap with C.I. Grating brick masonary chamber and water

98 tight C.I. Cover with frame of 300 mm. X 300 size (inside) with standard weight (I) Square 10.00 Nos. 1,246.92

mouth traps (C) 150 mm. X 100 mm size p or R type

Providing and fixing CP brass stop cock of approved quality 15 mm size with adjustable

Constructing brick masonary chamber for under ground C.I. Inspection chamber and bends

with bricks having crushing strength not less than 35 Kg/cm2 in cm. 1:5 C.I. Cover with

frame (light duty) 455 mm. X 610 mm. Internal dimensions, total weight of cover with frame

to be not less than 38 Kgs. weight of cover 23 Kg. and wt. of frame 15 Kg) R.C.C. top slab

with 1:2:4 mix(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm. size ) foundation

concrete 1:5:10 inside plaster 15 mm. thick with cement mortar 1:3 finished smooth with a

floating coat of neat cement on walls & bed concrete etc. complete.(I) inside dimensions,

mm. x 610 mm. And 450 mm. Deep for single pipe line.

Constructing brick masonary chamber for under ground C.I. Inspection chamber and bends

with bricks having crushing strength not less than 35 Kg/cm2 in cm. 1:5 C.I. Cover with

frame (light duty) 455 mm. X 610 mm. Internal dimensions, total weight of cover with frame

to be not less than 38 Kgs. weight of cover 23 Kg. and wt. of frame 15 Kg) R.C.C. top slab

with 1:2:4 mix(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm. size ) foundation

concrete 1:5:10 inside plaster 15 mm. thick with cement mortar 1:3 finished smooth with a

floating coat of neat cement on walls & bed concrete etc. complete.(ii) Inside dimension

mm x 700 mm and 450 mm deep for pipe line with one or two inlets

102 Providing and filling screened of burnt coal cinder including and consolidation etc complete. 23.00 Cu.M. 625.47

Providing and fixing in position 300 mm high, 150 mm wide English letters made from

103 mm thick stainless steel sheet as directed by Engineer-in-charge with all necessary tools & 60.00 No. 707.00

plants etc. complete.

Providing and fixing in position 150 mm high, English letters made from 1.0 mm thick

104 stainless steel sheet as directed by Engineer-in-charge with all necessary tools & plants etc. 100.00 No. 404.00

Constructing Sandwitch Platform of 18 mm thick Polished Black Granite at top and 25 mm

thick Kota stone slab using cement mortar 1:3 for sandwich and fitting at bottom & edges

with waterproof rigid adhesives including macking necessary grooves in walls with Vertical

Kotastone 30 mm x 2 No sandwitch thick every 60 cm centre to cenre including all labour

material of approved quality incl. full moulded round front edge fixed in wall for partition

and jointed with grey cement slurry including rubbing and polishing etc. complete

Name of Work: Construction of Taluka Panchayat Office Building @ Dediyapada, Dist. Narmada.

BILL OF QUANTITIES

Item Description Qty. Unit Rates Amount

Extra for additional height of propping and centering where the height of propping and

106 centering exceeds 4.00 mt. Between supporting floor two ceiling including temporary brick or 27.00 Sq.Mt. 407.75

stone pillars for supporting as required.

SIGNAGES ON WALL

Providing, Fabricating & Fixing wall signage's using 304 grade Stainless steel brushed steel

107 finish plate of 1.5 mm thick fixed on a wall using s.s studs including punched (laser cut) 10.00 No. 1,010.00

lettering carried out on s.s plate of required size and text as directed by Engineer over the S.S

plate etc. complete. Size: 18" x 6"

SIGNAGES ON Door

Providing, Fabricating & Fixing 304 grade Stainless steel 1.5 mm thick brushed steel finish

108 plate fixed on a door using s.s studs and with punched(laser cut) lettering carried out on s.s 53.00 No. 656.50

plate of required size and text as directed by Engineer etc. complete.

Providing and fixing C.I. Manhole cover 0.60m x 0.45m size having weight not less than

Providing and fixing PVC Cowl vent of following dia etc complete as directed (A) 110 mm

Providing and fixing PVC Cowl vent of following dia etc complete as directed (B) 150 mm

Providing and laying controlled cement concrete M-200 and curing complete including the

112 cost of form work but excluding the cost of reinforcement for reinforced concrete work 9.00 CuM 5,147.97

Providing T M T. bar reinforcement of Fe-500 for R.C.C. work including bending binding

and placing in position complete up to All floor Level

Providing and fixing M.S. grills / Gates of required pattern to brick walls / Columns prepared

with M.S. flats, angles, Square / round bars, square pipes, at required spacings with

necessary hold fasts as per detailed drawing and fixing brick walls / coping / columns etc.

complete including painting two coat & applying primer coat. (A) Ornamental Grill

Providing and casting in situ ordinary cement concrete M.100 for R.C.C. work in piers

115 abutment and R.C.C. return as per drawing including centering shuttering scaffolding where 7.60 Cu.M. 3,417.28

necessary laying vibrating curing and finishing complete.

Constructing cattle trap made from ISMC 100 border and G.I. pipe 50 mm dia HEAVY

116 DUTY at 12 cm spcaing by welding and necessary support of I.S.M.B. 100 x 75 x 6 section 12.00 Sq.Mt. 5,183.32

Fixing in prepard chamber as per drawing by necessary arrangement etc. comp.

Providing and laying controlled cement concrete M-200 and curing complete including the

117 cost of form work but excluding the cost of reinforcement for reinforced concrete work in 7.80 CuM 3,887.49

foundation footings, base of columns and mass concrete.

Providing and laying controlled cement concrete M-200 and curing complete including the

118 cost of form work but excluding the cost of reinforcement for reinforced concrete work in 21.60 CuM 5,838.81

Providing and laying white glazed tiles 6 mm. Thick in flooring treads of steps and landings

119 laid on a Bed of 12 mm. Thick cement mortar 1:3 (1 cement : 3 coarse sand) finished with 12.00 SqM 955.40

flush pointing in white cement

Providing and laying white glazed tiles 6 mm. Thick in skirting risers of steps and dado on

120 mm. Thick cement plaster 1:3 (1 cement : 3 coarse sand) pointing in white cement and jointed 42.00 SqM 1,030.57

with white cement slurry.

Providing and laying hand dressed polished blue Kota stone slab flooring over 20 mm.

(average) thick base of cement mortar 1:6 (1 cement : 6 coarse sand ) or L.M. 1:1.5 and laid

over and jointed with grey cement slurry including rubbing and semi mirror polishing with

emery stone No. 600 complete.(A) 25 mm. Thick

Name of Work: Construction of Taluka Panchayat Office Building @ Dediyapada, Dist. Narmada.

BILL OF QUANTITIES

Item Description Qty. Unit Rates Amount

Distempering (three coats) with oil bound distemper of approved brand & manufacturer & of

required shade on wall surfaces to give an even shade, over & including a primary coat with

122 alkali resistance primer of approved brand after thoroughly brushing the surface free from 67.00 SqM 104.07

mortar dropping & other foreign matter & also including preparing the surface even &

Providing cement vata (10 cm x 10 cm size ) quarter round in cement mortar 1:1 including

neat cement finishing watering etc. complete.

Providing and fixing C.I. Manhole cover 0.60m x 0.45m size having weight not less than

Box cutting the road surface to proper slope and camber for making a base of road work

125 including removing the excavated stuff and depositing on the road side slope as directed 227.00 Cu.M. 112.01

upto50 mts, lead

Supplying and stacking of graded stone aggregate of following size (for W. B. M. )

including spreading (1 ) Machine crushed stone aggregate 45 mm to 63 mm size

127 Supplying and stacking of Soft murrum / Binding materials including spreading 40.00 CuM 338.10

Rolling and consolidation using vibratory road roller 8 - 10 tonne capacity (C) Water bound

Macadam (Layer not exceeding 100mm thickness)

Providing laying controlled cement concrete M-200 and curing complete including the cost of

129 form work and but excluding cost of reinforcement for reinforced concrete work in :(a) 227.00 Cu.M. 3,991.51

Foundations, footings Base of columns and mass concrete.

Compaction and finishing of cement concrete road by trimix process providing extra labour

charges for the trimix vacum dewatering service process on cement concrete road surface by

using vacum dewatering pump floater surface vibrator including making groves and rough

finish to surface as per in including levelling the complete.

131 Supplying premoulded bituminous joint filler (iI) 25 mm. Thick 69.20 Sq.Mt. 611.13

132 Supplying and stacking of Soft murrum / Binding materials including spreading 15.00 CuM 271.74

Steel work welded in built up sections, framed work including cutting, hoisting, fixing in

position and applying a priming coat of red lead paint and two coats of mattfinished oil

painting etc complete. :-(B) In trusses and trussed purlins upto 25 m. span and 15 m. overall

Providing corrugated PPGL Sheets roofing fixed with Galvanized iron 'J' or 'L' hooks bolts

and nuts 8 m. diameter with bitumen and G.I.Limpet washers filled with white lead complete

including ridges, gutters etc. excluding the cost of purlins, rafters and trusses. (1) 0.60 mm.

Providing 6.0 Kg f/cm2 working pressure polythelene pipes of the following outside dia. Low

density, complete with special flange compression type fittings wall clamps etc. including

making good the wall, ceiling and floor. including Lowering, laying and jointing PVC pipes

and specials of following class and diameter including cost of conveyance (i) 110 mm

Providing 6.0 Kg f/cm2 working pressure polythelene pipes of the following outside dia. Low

density, complete with special flange compression type fittings wall clamps etc. including

making good the wall, ceiling and floor. including Lowering, laying and jointing PVC pipes

and specials of following class and diameter including cost of conveyance (i) 160 mm

Providing and Construction of Junction chambers of size 0.35 x 0.35 x 0.60 mt. with

Foundation Concrete in CM 1:2:4 10 Cm thick, Half Brick Masonary wall in CM 1:4, 50 mm

thick Flooring in CC 1:2:4 Inside Plaster 15 mm thick in C.M. 1:4 including connecting of

rainwater pipe as per detailed drawing and as directed by Engineer in charge

Providing and constructing filter chamber of size 2.06 x 1.21 x 1.20 mt. with Foundation

Concrete in CM 1:2:4 12.5 Cm thick, 23 cm thick Brick masonary in CM 1:6, Half Brick

Masonary Partition wall in CM 1:4, Inside Plaster 15 mm thick in C.M. 1:4 and cover slab

cm thick in CM 1:2:4 with necessaary reinforcement and Filling 30 cm with 25 to 40 mm size

Kapachi and Coarse sand for 90 cm as directed including connection rainwater pipes as per

detailed as directed by Engineer in charge including cost of labour and material

Name of Work: Construction of Taluka Panchayat Office Building @ Dediyapada, Dist. Narmada.

BILL OF QUANTITIES

Item Description Qty. Unit Rates Amount

Providing water harvesting pit of 2.00 mt x 2.00mt x 4.00 mt. size for water logging with

excavation in any strata upto four meter depth, filling the pit with B.T.Metal 40 mm in

139 mt. depth with 25-40mm kapachi, 0.30 mt. depth and 2.0 mt. depth with coarse sand in layers 1.00 No 31,992.76

including making P.V.C. line for water inlet etc. as directed with 250mm dia bore 35 mt.

depth and 150mm dia P.V.C. pipe of 10 Kg. f/Cm2 casing with gravel packing or as directed.

Supplying and installing of Dry Chemical Powder type 5 Kg. capacity fire extinguisher as per

IS 2171 ISI mark with necessary fitting etc. complete.

Providing carbon dioxide type fire extinguisher 4.50 Kg. capacity with IS mark and test

certificates of explosive department of Nagpur

Demolition of Brick work and stone masonry including stacking of serviceable materilas and

disposal of unserviceable materials with all lead and lift. (ii) In Cement Mortar.

Dismentalings manglore of country tile roofing with battens boarding etc. including stacking

143 of serviceable materilas and disposal of unserviceable materials with all lead and lift.(ii) 637.00 Smt 90.75

Wooden roofing.

Demolition R.C.C. work including stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift.

Dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats

145 architraves, holdfasts and other attachment etc. complete and stacking them within all lead 131.00 Each 194.71

and lift.(i) Not exceeding 3 Sq.M. in area.

Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas

and disposal of unserviceable materials with all lead and lift.

Dismentaling C.I. pipes G.S.W. pipes abd A.C rain water pipes with fittings and clamps

including stacking the materials with all lead and lift(for any dia of pipe)

Dismentaling sanatary fitting like wash basin w.c pan indian and europion type flushing tank

etc.including stacking the materials with all lead and lift

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are

of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr

length , in below type of pipe erected with 6A Modular type switch / bell push & accessories

and earth continuity of following type, erected on PVC / Metallic/ Wooden box, single

mounting base frame covered with textured/metallic/ white front plate modules erected on /

in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector

as directed. (f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete. Cat-III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI

marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in

below type of pipe erected with 6A Modular type switch and hum free EME step type

electronic fan regulator mounted and accessories with earth continuity of following type

erected on PVC / Metallic/ Wooden box, single mounting base frame covered with

textured/metallic/ white front plate modules erected on / in wall / ceiling as per pipe erected.

with necessary ceiling rose / H.D.Connector as directed. (f) with medium class Rigid PVC

pipe and accessories erected concealed in wall/ ceiling complete, Cat-III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in

below type of pipe erected complete with Modular type switch & 5 pin Plug erected on PVC

151 / Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / 11.00 Pt. 612.06

ceiling as per pipe erected with following type of accessories.[I] For 6A Plug and 6 a switch

with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board, (f) with medium class

Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board. (f)

152 with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling 3.00 Pt. 894.86

complete, Cat-III

Name of Work: Construction of Taluka Panchayat Office Building @ Dediyapada, Dist. Narmada.

BILL OF QUANTITIES

Item Description Qty. Unit Rates Amount

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected

on PVC / Metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate modules erected on / in wall / ceiling with following type

accessories, Cat-III

Providing following type of Modular Type Accessories mounted with PVC/ metallic/Wooden

box, single mounting base frame covered with textured / metallic/white front plate , modules

erected with necessary connections as per site situation directed by Engineer In charge.(3)

Two Pin/RJ-11 Telephone Socket, [A] For One Gang, Cat-III

155 (8) Computer RJ-45 socket, Cat-III 25.00 Ea. 160.59

156 (10) 6/16Amp. Universal socket, Cat-III 8.00 Ea. 199.98

157 (14) 6A/ 10A/ 16A/ 20A/ 25A/ 32A Double Pole Modular MCB Switch, Cat-III 8.00 Ea. 410.06

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size

complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Junction

boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved

manner as directed, (a)20 mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected concealed in /flushed on

159 wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green 1080.00 Mtr. 104.03

colour for earth continuity of following size, (A) with medium class Rigid PVC pipe and

accessories, (b) 2 wire 2.5 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with

160 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth 280.00 Mtr. 140.39

continuity of following size, (A) with medium class Rigid PVC pipe and accessories, (a)

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI

162 marked copper wires of following size to be erected as directed. e) 1.50 Sq.mm 3 core round 100.00 Mtr. 58.58

Supplying & erecting approved make Telephone Cable electrolytic copper conductor PE

insulation twisted in two pairs, & wrapped with FRLS PVC tape & sheathed with FRLS

163 PVC or HFFR outer Jacket suitable for telephone wiring & confirming to C-DOT erected in 300.00 Mtr. 20.20

existing pipe. of following size of conductors & nos.of pairs. With necessary connections. [A]

Conductor Size 0.5 mm, (a) Unarmoured, 2) Two Pairs

164 5) Ten Pairs 110.00 Mtr. 65.65

Supplying & erecting approved make LAN cable of following size in existing pipe as per

direction, [C] CAT -

Providing & erecting main Distribution (MDF) indoor type, back mounted frame as per DoT

standard approved with krone strips, (a) Suitable for 10 pair

Providing & erecting Switch board for Computer or electric apparatus consisting of

following modular type accessories mounted with PVC / Metallic concealed/open box with

167 single mounting base frame covered with textured/metallic /white front plate,modules erected 24.00 Ea. 1,133.22

with necessary connections as directed, 1 no. 6A/16A universal plug-switch combined. 3 nos.

6A Switch, 3 nos. 6A 5 pin Plug, For Modular Type Accessories, Cat-III

168 Call bell / Buzzer,250 volts, complete erected. 1.00 Ea. 31.31

169 Call bell gong type suitable for 230 volts, 50 c/s. AC supply complete Erected 1.00 Ea. 42.42

170 Decorative call bell Ting-tong box type 250 volts complete erected 2.00 Ea. 71.71

Name of Work: Construction of Taluka Panchayat Office Building @ Dediyapada, Dist. Narmada.

BILL OF QUANTITIES

Item Description Qty. Unit Rates Amount

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/ CRCA/ aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company mark/name 160V to 270V, Power Factor

171 more than 0.95, THD < 15%, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt , 119.00 Ea. 535.30

LED driver efficiency > 85 % (fitting required LM-79 & LM-80 Certificates) (NOTE: Below

description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.) (A) Tube Light with integral

driver, (v) 36-40 Watts, Surge-2 KV, IP-20, conventional 4 feet, Cat-III

Supplying and erecting led lamps with following wattage capacity of 220 to 240 voltage,

minimum 15000 burning hours life, 500 V in built-surge protection, Polycarbonate diffuser,

mounting suitable for E14 / E27 / B22 lamp holders, pf >= 0.5, (A) LED Lamps integral type,

with PC diffuser suitable LAMP holder (ii) 8 watts and above, Cat-III

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/ CRCA/ aluminium pressure die cast powder coated and high

U.V. & corrosion resistance with diffuser housed in aluminium casted body with company

mark/ name 160V to 270V, Power Factor more than 0.95, THD < 15 %, CCT 3000 K to

173 6500K, Luminaire efficacy> 85 lumens/ watt , LED driver efficiency > 85 % (fitting required 27.00 Ea. 758.51

LM-79 & LM-80 Certificates) (NOTE: Below description have shown ranges of Wattage

capacity of LED fittings. The Engineer incharge may select any wattage capacity between the

ranges shown.) (A) Square/ Circular shaped Surface/Recessed Mount Downlight with

provision for spring loaded mounting clips complete.IP20, (iv) 22-24 watts, Surge-2 KV, Cat-

Supplying and erecting LED street light / Flood light fittings with High power White LEDs

wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, with

toughened glass with company mark/name engraved or embossed 160 to 270 V,Power Factor

174 more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire 20.00 Ea. 5,080.30

efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79 & LM-

80 certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity between the ranges

shown.)(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection.(iii) 60 - 89 watts, Cat-III

(C) Post Top Lantern LED fitting comprises of Copper dust finish cast aluminum spigot and

175 spun aluminum canopy fixed with opal polycarbonate, pipe arrangement for vertical mounting 2.00 Ea. 4,096.56

driver and accessories wired upto terminal block.IP 65,(ii)32-40W, Cat-III

Providing and erecting Approved make Four pole moulded case circuit breaker having

breaking capacity ICU of 25 KA. at 415 V,having normal current rating up to 25 A to 100A.

176 with Fixed thermal & magnetic release suitable to work on A.C. supply 50 c/s. with all 1.00 Ea. 6,790.23

internal connections, spreader tinned copper & complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only, Cat III

providing and erecting Approved make Four pole moulded case circuit breaker having

breaking capacity ICU of 25 KA. at 415 V,having normal current rating up to 25 A to 100A.

177 with Fixed thermal & magnetic release suitable to work on A.C. supply 50 c/s. with all 1.00 Ea. 7,469.25

internal connections, spreader tinned copper & complete erected With 16 G.M.S. housing.

ICS=100% of ICU only, Cat III

Name of Work: Construction of Taluka Panchayat Office Building @ Dediyapada, Dist. Narmada.

BILL OF QUANTITIES

Item Description Qty. Unit Rates Amount

Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper Busbars

with four equal Nos. of electrolyte bus having current density not more than 1.6 Amp. /

sq.mm (Rated current / cross section area) duly wrapped with colour insulating tape for phase

sequence of following current carrying capacity, erected with necessary bus bar supports

/insulators, main cable socket to each bar, erected in existing cubical panel with necessary

connections. (A) Suitable for 100 Amp. Capacity

providing and erecting Miniature circuit breaker single pole 0.5A to 2A system and having

179 breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI 22.00 Ea 297.95

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on

180 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. 72.00 Ea. 123.22

confirming to IS 8828/1996 with ISI Mark, Cat-III

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve)

181 having 10 KA breaking capacity & confirms to IS : 8828 in existing box having following 2.00 Ea. 362.59

capacity, (B) 40 Amp., Cat-III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having

182 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity, 2.00 Ea. 655.49

(a) 6 to 32 Amp.Cat-III

183 (b)40 Amp. Cat-III 10.00 Ea. 736.29

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface

mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 &

184 IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used 2.00 Ea. 629.23

of same company of MCB to be used) suitable for, (A) single phase incoming and horizontal

single phase outgoing, (b) sheet steel double door (IP-43) (i)4 way [3-11-5]

(B) three phase incoming and single phase horizontal type outgoing Per phase isolation type

(PPI), (b) sheet steel double door, (ii) 6 way

Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 30 mA

and Short Circuit withstand capacity of 6 KA and suitable for operation on single phase

186 V. having characteristic of quick action & tripping with all advance feature & do not 12.00 Ea. 2,919.91

incorporate any electronic component. for following Max. rating erected as directed 40Amps.

Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms. dia. galvanised

187 iron pipe with coupling and buch burried in specially prepared earth pit complete with 4.00 Ea. 368.65

necessary 8 SWG earth wire

188 For using salt and charcoal/coke as required for pipe type earthing 4.00 Ea 171.70

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing

Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner

pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of 12mm

with constant ohmic value surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications with chamber and heavy duty

cover.(approved make OEM has to submit test certificate) & having back filling compound

of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 Ὠ/ meter testing as per IEC 62561-

2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable to retain moisture for long time

Necessary test report must be submitted. (a) For Electrical Installation up to 440V in normal

soil, Length of pipe - 1 Mtr, Back filling compound - 1 Nos Bag of 15 Kg.

Name of Work: Construction of Taluka Panchayat Office Building @ Dediyapada, Dist. Narmada.

BILL OF QUANTITIES

Item Description Qty. Unit Rates Amount

Providing & erecting weather proof, dust & vermin proof, floor mounted front operated

indoor type cubical panel board having IP-64 protection made from 14 SWG thick CRC M.S.

sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with

necessary supporting angles, flats including cutting, bending, drilling, welding, riveting with

internal partitions & cable alley as per requirements & instruction of engineer-in-charge with

erection of supplied switch gears, BUSBARS, with suitable size of inter connecting PVC

copper wire / copper-aluminium strips, rubber grommets, rib, Bakelite control fuses for

measuring instruments, earth bus & earth bolts, foundation flange - bolts-base Plates,

sufficient nos. of hinged doors, handles with locking arrangement and rubber gasket

complete. The Panel shall be painted with epoxy powder coating. (The rates excludes the cost

of switchgears, bus bars, inter connecting mains & Copper Aluminium strips, meters, Fuses

etc. The dimension shall be measured excluding base beams) The panel shall be supplied with

following approved manufacturers with following size. (A) locally fabricated panel board (i)

with 350 mm depth

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium

191 conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe 70.00 Mtr. 341.38

of following size of cables3 1/2 core 50 Sq. mm ( 25 Sq. mm 1/2 core)

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid

192 Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing 700.00 Mtr. 151.50

trench / pipe of following size of cables, (B) 4 core 6 Sq. mm

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium

193 conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe 100.00 Mtr. 184.83

of following size of cables.(A) 4 core 16 Sq. mm

Making trench in soft soil of suitable width of 90 cm deep for laying cable or locating the

fault all over the run and back filling the same and making the surface as normal ground.

Providing & laying approved make Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same

material at required depth in existing trench for laying of cable. below ground / road surface

for enclosing cable. (A) 50 mm outer dia

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC

196 insulated armoured cable complete with out going tails, insulating tape etc for following size 40.00 Ea. 38.38

of cables. (B) 2 to 4 core 6 Sq. mm

Providing and, fixing heavy duty flange type brass double compression type cable gland with

198 rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape 2.00 Ea. 75.75

etc for following size of cables. (B) 3½ core 50 Sq. mm

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following

199 size evenly crimped with high pressure tool & connected to switchgear terminals with 80.00 Ea. 6.06

brass/cadmium plated nut bolts in an approved manner.(A) 1.5/ 2.5/4/6 Sq.mm

Providing & erecting Approved make Power Saving 45 - 50 Watt Ceiling Fan with double

ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete having

3blades with aluminium blades with , canopy & 30 cm. down rod erected with

earthing.(Make shall be approved by Engineer in charge))

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod erected

duly painted for fan complete with proper insulation without leakage and earthing.

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC bars up to

204 50mm length each side and pierced through a 16 Gauge M.S. box / Heavy Duty PVC box 54.00 Ea. 108.07

complete erected concealed in Ceiling with necessary finishing.

Supplying & erecting approved make low noise decorative exhaust fan having square frame

ABS body with inbuilt lowers & square frame. 250mm with 1350 RPM, Cat-III

Name of Work: Construction of Taluka Panchayat Office Building @ Dediyapada, Dist. Narmada.

BILL OF QUANTITIES

Item Description Qty. Unit Rates Amount

Supplying and erecting approved make Octagonal pole made from HR sheet steel. The pole

should be made as per IS. and shall be coated with hot dip galvanizing as per IS

2629/2633/4759, suitable suspend local wind speed with integral Junction box consist of

terminal plate of min 6mm Hylam sheet, standard profile 35mmX7.5mm Din-Rail for MCB

Mounting, stud type terminal and arrangement for cable termination to be erected With

Suitable foundation (Included) as per details given by manufacturer considering site

requirement. ( C ) 5 Mtr. Long 70 mm Top X 130 mm bottom dia, 3 mm thickness with

200mmX200mmX12mm base plate, 4-M16 Bolts and 600mm long J-Bolt.

Supplying and erecting Street light pole bracket comprising main B Class GI pipe of

cm/require outside dia. complete with suitable B Class G.I. sleeve tubing of approx.

45cms.length and suitable for 76.5mm/80mm/require size of pole top having nuts and bolts

207 for fixing the brackets and having spread of 0.5 mtr. Length with 110 deg.with vertical plane 20.00 Ea. 491.87

and suitable welded stiffener reducer and nipple with check nut complete painted with one

coat.of Red oxide / PU base primer and two coats of Aluminium / PU paint. paint with

following nos of arms. [A] Single Arm bracket 0.5 Mtr

Supplying & erecting approved make IP 55 grade Company fabricated Timer Panel of

following capacity for switch On-Off street lights on time scheduling basis made from 16G

CRCA sheet duly epoxy power painted inside and outside with hinged doors and locking

arrangement consisting of suitable size of 4 Pole MCB and 4 pole contactor (cat-III)with

analog time switch, auto manual switch of same make and suitable input and output Bakelite

terminals and with door earthing approved by Engineer in charge.(B) 40 Amp

Providing and erecting Small EPABX System with In Built 4 Port Voice Mail [Approved by

209 Competent Authority i.e. not Below the rank of Executive Engineer ] [B] No. Extension - 16 , 1.00 Ea. 72,129.15

No. of Junction -8 , No. of expandable ports -64 , Operators Console -01 Compatible - ISDN

Supplying & erecting push button type telephone instrument having speaker phone Caller ID

& speaker phone with one touch memory (min.6 nos.)& 99 memories with display system

Single line [[Approved by Competent Authority i.e. not Below the rank of Executive Engineer

Providing and erecting Inverter based approved make split air-conditioning unit consisting of

condensing unit with variable speed fan motor, inverter type hermetically sealed rotary

compressor with accessories etc. duly connected separately erected evaporating unit and

211 blower motor with its accessories by means of extra supplied proper insulated copper 3.00 Ea. 70,142.48

tubing,drain PVC pipes suitable for ( cost includes Eco Friendly green gas charging and 15A

plug top & Remote Control & MS Stand) with necessary core cutting.(2)For ISEER Range

(KWH/KWH)(4.0 to 4.49).(C) for 1.7 to 2 ton capacity.

Supplying and erecting insulated pair of soft copper tubing open or concealed including

212 power and control cable,necessary PVC drain pipes for Split/Cassette AC machine up to 4 30.00 Rmt. 1,158.47

Providing & erecting water cooler having storage capacity 150 Ltr. & cooling capacity

Ltr.per hour @ an ambient temp of 45 C. The outlet temp. of the water should drop by 15 C

within a hour, The water cooler should be comprising of hermetically sealed compressor, fan

motor, condensing unit, water tank surrounded by evaporating, coil, thermostats, relay

etc.complete with necessary inlet & outlet connection. The body of water cooler will be made

from Stainless Steel.

Name of Work: Construction of Taluka Panchayat Office Building @ Dediyapada, Dist. Narmada.

BILL OF QUANTITIES

Item Description Qty. Unit Rates Amount

Supplying & erecting reverse osmosis (RO) water purification system with M.S. powder

coated pedestal frame, prefilter housing carbon filter suitable buster DC pump, auto low &

high pressure switches with following size of LPH capacity & erected as directed with one

year comprehensive maintenance guarantee. [D] 100 LPH with 3 phase Raw water pump of

500LPH @ 2.5kg/cm2 - (1N0 - Kirloskar /CRI/Lubi), Dual media filter 10"x54" - (1 No),

Micron cartridge filter 20" x 2.5" ( 1No), High pressure pump 500LPH @ 10kg/cm2 - (1No -

Shimge /CRI /Lubi), RO Membrane housing with RO membrane of 40*40 - (1No), RO

pressure tube 4" x 1E - ( 1No), 0 - 1200LPH Rotameter -(2 Nos), with Recovery Rate 50%.

Supplying and erecting approved make panel mounting type Digital Voltmeter having

215 digits LED display, 0 to 750 AC Volts range erected on existing panel board with all 1.00 Ea 1,275.63

connection, wiring etc .with manufacturers calibration certificate.

Supplying and erecting approved make panel mounting type Digital Ammeter having

digits LED display, external CT operated, calibrated for 0 to 1000 Amps suitable to operate

on 500 Volt AC , erected on existing panel board with all connection, wiring etc. with

manufacturers calibration certificate.

Providing & erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 ratio 15 VA

217 burden erected in existing CRCA box duly secured with insulating materials connected to the 3.00 Ea 274.72

Supplying and erecting approved make suitable panel indicator lamps of LED type lamp, lens

cover, Bakelite holder complete erected with necessary connections.

Dismental Credit -20,573.83

Amount in Rupees: Three Crores Forty Eight Lakhs Fifty Five Thousund Two Hundred Twenty Two & Four Paisa Only

(A) Total Tendered Amount Rs.:

(B) Rebate on Tendered Amount (if any) _______% (in Figures) Rs.:

(C) Net Tendered Amount (A – B) Rs.:

(* Please strike out whichever is not applicable).

1. All work shall be carried out as per public works Department Handbook and other specifications of Division or as directed.

2. All the columns is Schedule should be filled in ink and the total of the entries in the last column should be struck by the contractor under his

3. Rates quoted include clearance of site (Prior commencement of work and as its close) in all respects and hold good for work under all

4. To be Continued on additional sheets, if found necessary.

5. 1.00 % of Construction cost shall be deducted form Bill. Amount of Contract as per the Building and other Construction worker's welfare cess

6. Credit of dismantled materials of amount of Rs.20,573.83/- must be recovered from Contractor's first R.A Bill.

7. For abnormal high or law rates payment of such items shall be regulated as per Govt. circular No. PARACH / 102008 / 61 / S, Dt. 27/11/2008

8 The contractor shall exhibit a board as per Government Circular No. Vernacular TNC/1090/24/S dated 05.03.2011 with details specifications

9 Testing of material shall be done as per statement attached with specification. The material should be tested in GERI or Private laboratory

10 In all R.C.C. items in rate analysis, standard cement consumption has been taken as per Govt. GR. PRC- 10/ 2017/ Cement Consumption/ 16/

11 The Contractor is solely responsible to bare all applicable taxes i.e. GST etc. & department will not entertain any contractor representation to

Dated Signature of the Contractor :

Deputy Executive Engineer Divisional Accounts officer Executive Engineer

R & B (P) Sub Division R & B (P) Sub Division R & B (P) Sub Division

Dediapada Narmada Narmada