Providing of Clear Water 75HP Pumpset and Starter Panel Model Colony pump house at 10 MLD Dowleswaram of RMC (Under Pushkarams/ General funds)

Supply and delivery of 216 m³/hour, 54meters head horizontal endsuction bare pumpset with, suitable motor, mechanical seal, coupling, coupling guard, base frame, etc., complete. Pump Type: Horizontal Endsuction Bare pumpset Make: KIRLOSKAR Suc X Del Size: 150 X 125 mm Capacity (Flow Rate): 216m³/hr Total Dyanamic Head: 54 mtrs Nominal speed(rpm): 1480 rpm Specific gravity: 1 Pump efficiency: 76.65% Pump input-BKW: 40.85kw NPSHR: 2.75m + 0.5 m Casing: Cl Impeller: BRONZE Shaft: Carbon stell 45C8 Shaft sleeves: Cl Shaft Sealing: Gland Packing Rating-KW/HP: 55KW/75 HP Speed-rpm: 1480 RPM Enclosure: TEFC, IE-2,NFLP. Frame Size: RC250SM Make: Kirloskar/WPIL

Dismantling of the existing CC foundation, excavation, preparation and casting of new RCC foundation with foundation bolts as per site requirement, curing, erection, alignment, fixing, testing and commissioning of above pump set including crane all labour etc., complete as directed by the departmental authorities.

Manufacture, supply, delivery and fixing of required M.S. fabricated Pipe and specials (Bends, Tees and Reducers etc.) using required size M.S. sheet and providing redoxide paint and anticorrosion paint two coats including cost of all materials, conveyance to work spot fixing in position and all labour charges fabrication charges etc. complete as per the instructions of the Departmental Authorities.

Supply and delivery of "Resilient Seated Soft Sealing" gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 of Equivalent as per IS 1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-0 ring protection system on the Shaft and seals of NBR. The Valves should be Vaccume tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns) - RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN -3202F4/BS:5163 Type A Flange drilling as per IS-1538 including transportation. SSR 2025-2026,(PN 1.6)MPa (MAT-08067) For 150mm Sluice valve

Supply, Delivery of D.I Double Flanged Swing Check type Reflux valves (Non Return Valves) of following dia. conforming to IS-5312 (Pts-182) (with amendments up to date, if any) having Body, Cover, Door, Bearing holder with D.I; Hinge pin, Door pin, Door suspension pin with Stainless Steel (IS 6603); Body seat ring, Door face ring, Bearing bushes, Plugs for hinge pin with Leaded Tin Bronze (IS 318); Bolts, Nuts with Carbon steel; Gaskets with Rubber; Hinges with Cast steel; excluding transportation and all taxes complete.450mm PN 1.6 MAT-08048 150mm NRV

Lowering, Keeping in position and fixing C.I. sluice valves (with cap/with hand wheel & Reflex valves excluding cost of Bolts, Nuts, rubber insertion, sluice valve and tail pieces. PHE-CISV-15.

Jointing C.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead upto 500 Mtrs and testing to required pressure complete (Reference to specifications BIS No.3114/1994) PHE-JCIF-5

Providing independent earthing for Important equipment with 100mm dia Heavy gauge C.I (Cast iron) pipe with Flange 2.5m long enclosed in C.C/ brick masonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)

Supply of Single Core, 255qmm ISI marked, PVC insulated and sheathed FRLS/FRLS-H round copper cable for voltage up to 9 1100V as per IS 694/1990. Makes: Polycab, Finolex, Havells, Fortunearrt, V-guard

Supply and delivery, wiring testing and commissioning of 75Hp star-delta stater panel complete with all accessories. Description of the item: 1.CRCA Panel Board (1000 x 600 x 300 mm, 16 SWG) 2.MNX-95 Power Contactor 3Nos (Schneider/L&T) MNX-95 Power Contactor (Schneider/L&T) 3.Thermal Overload Relay (63-80 A or suitable for 75 HP FLC) 1No. 4.160A 4 Pole MCCB 1 No. 5.Star-Delta Timer 1 No. 6.Ammeter (0-150 A) with CTs (1 Set) 7.Voltmeter (0-500 V) with Selector Switch 15et 8.R-Y-B Indication Lamps 1 Set 9.Control MCB (6A SP) 1 No. 10.Copper Busbar, Internal Wiring, Terminals, Glands & All Accessories Make: Schneider/L&T

Supply, Installation, Testing and commissioning of Vacuum Pump of Kirloskar Make, Pump Model: DV 50 Coupled set, 7.5KW/10HP, 1450RPM having section x delivery 50 x 50mm including suitable base frame, motor Starters including cost and conveyance of all materials to work spot and all operational, incidental charges, labour charges etc., complete as directed by the site engineer.

Details of Maximum amount reimbursable to the Contractor.

1) Provision for GST @18%

2) Provision for NAC @ 0.10%

Supply and delivery of 216 m³/hour, 54meters head horizontal endsuction bare pumpset with, suitable motor, mechanical seal, coupling, coupling guard, base frame, etc., complete. Pump Type: Horizontal Endsuction Bare pumpset Make: KIRLOSKAR Suc X Del Size: 150 X 125 mm Capacity (Flow Rate): 216m³/hr Total Dyanamic Head: 54 mtrs Nominal speed(rpm): 1480 rpm Specific gravity: 1 Pump efficiency: 76.65% Pump input-BKW: 40.85kw NPSHR: 2.75m + 0.5 m Casing: Cl Impeller: BRONZE Shaft: Carbon stell 45C8 Shaft sleeves: Cl Shaft Sealing: Gland Packing Rating-KW/HP: 55KW/75 HP Speed-rpm: 1480 RPM Enclosure: TEFC, IE-2,NFLP. Frame Size: RC250SM Make: Kirloskar/WPIL

Dismantling of the existing CC foundation, excavation, preparation and casting of new RCC foundation with foundation bolts as per site requirement, curing, erection, alignment, fixing, testing and commissioning of above pump set including crane all labour etc., complete as directed by the departmental authorities.

Manufacture, supply, delivery and fixing of required M.S. fabricated Pipe and specials (Bends, Tees and Reducers etc.) using required size M.S. sheet and providing redoxide paint and anticorrosion paint two coats including cost of all materials, conveyance to work spot fixing in position and all labour charges fabrication charges etc. complete as per the instructions of the Departmental Authorities.

Supply and delivery of "Resilient Seated Soft Sealing" gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 of Equivalent as per IS 1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-0 ring protection system on the Shaft and seals of NBR. The Valves should be Vaccume tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns) - RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN -3202F4/BS:5163 Type A Flange drilling as per IS-1538 including transportation. SSR 2025-2026,(PN 1.6)MPa (MAT-08067) For 150mm Sluice valve

Supply, Delivery of D.I Double Flanged Swing Check type Reflux valves (Non Return Valves) of following dia. conforming to IS-5312 (Pts-182) (with amendments up to date, if any) having Body, Cover, Door, Bearing holder with D.I; Hinge pin, Door pin, Door suspension pin with Stainless Steel (IS 6603); Body seat ring, Door face ring, Bearing bushes, Plugs for hinge pin with Leaded Tin Bronze (IS 318); Bolts, Nuts with Carbon steel; Gaskets with Rubber; Hinges with Cast steel; excluding transportation and all taxes complete.450mm PN 1.6 MAT-08048 150mm NRV

Lowering, Keeping in position and fixing C.I. sluice valves (with cap/with hand wheel & Reflex valves excluding cost of Bolts, Nuts, rubber insertion, sluice valve and tail pieces. PHE-CISV-15.

Jointing C.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead upto 500 Mtrs and testing to required pressure complete (Reference to specifications BIS No.3114/1994) PHE-JCIF-5

Providing independent earthing for Important equipment with 100mm dia Heavy gauge C.I (Cast iron) pipe with Flange 2.5m long enclosed in C.C/ brick masonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)

Supply of Single Core, 255qmm ISI marked, PVC insulated and sheathed FRLS/FRLS-H round copper cable for voltage up to 9 1100V as per IS 694/1990. Makes: Polycab, Finolex, Havells, Fortunearrt, V-guard

Supply and delivery, wiring testing and commissioning of 75Hp star-delta stater panel complete with all accessories. Description of the item: 1.CRCA Panel Board (1000 x 600 x 300 mm, 16 SWG) 2.MNX-95 Power Contactor 3Nos (Schneider/L&T) MNX-95 Power Contactor (Schneider/L&T) 3.Thermal Overload Relay (63-80 A or suitable for 75 HP FLC) 1No. 4.160A 4 Pole MCCB 1 No. 5.Star-Delta Timer 1 No. 6.Ammeter (0-150 A) with CTs (1 Set) 7.Voltmeter (0-500 V) with Selector Switch 15et 8.R-Y-B Indication Lamps 1 Set 9.Control MCB (6A SP) 1 No. 10.Copper Busbar, Internal Wiring, Terminals, Glands & All Accessories Make: Schneider/L&T

Supply, Installation, Testing and commissioning of Vacuum Pump of Kirloskar Make, Pump Model: DV 50 Coupled set, 7.5KW/10HP, 1450RPM having section x delivery 50 x 50mm including suitable base frame, motor Starters including cost and conveyance of all materials to work spot and all operational, incidental charges, labour charges etc., complete as directed by the site engineer.