Restoring functionality through repairs / maintenance of 8 No.Bore Wells (17,19,54,58,60,61,91 and 96 (under priority-1I Culuster-2 ) of department of Agriculture in District Pulwama under implementation of National Mission of Saffron

Job for restoration of DG set

Providing, fitting and testing of complete Alternator Assembly 415 V,1500 rpm,50Hz, 3 phase of Rating 40 KVA, Insulation class H along with AVR, self starter : The job includes providing and fitting of complete Alternator Assembly 415 V, 1500 rpm, 50Hz, 3 phase of Rating 40 KVA, Insulation class H along with AVR, self starter and then Alternator Assembly is coupled with engine and other various components.The Job also includes providing and fitting of allied connections, Hose pipe, clamps and electrical cables of requisite size along with thimbles for making necessary connections . Further the job includes connecting Alternator, inbuilt D.G control panel and other components by way of recommended cable size. All the wiring connections are to made with utmost care without causing damage to the equipment. After making all the proper connection D.G is to be tested at site with available load at Bore well scheme. All the tools, tackles, cables, wiring, thimbles are to be provided by the firm.( Leypower make, water cooled D.G set) well No. 91

Providing, fitting and testing of complete Alternator Assembly 415 V,1500 rpm,50Hz, 3 phase of Rating 40 KVA, Insulation class H along with AVR, self starter, dynamo : The job includes providing and fitting of complete Alternator Assembly 415 V, 1500 rpm, 50Hz, 3 phase of Rating 40 KVA, Insulation class H along with AVR, self starter, dynamo and then Alternator Assembly is coupled with engine and other various components.The Job also includes providing and fitting of allied connections, Hose pipe, clamps and electrical cables of requisite size along with thimbles for making necessary connections . Further the job includes connecting Alternator, inbuilt D.G control panel and other components by way of recommended cable size. All the wiring connections are to made with utmost care without causing damage to the equipment. After making all the proper connection D.G is to be tested at site with available load at Bore well scheme. All the tools, tackles, cables, wiring, thimbles are to be provided by the firm.( Ashok Leyland make, Water Cooled D.G set) well No. 96

Servicing and Pre operational Checks of D.G Set

Complete Servicing of DG set of varying capacities of Bore well schemes at site in district Pulwama by way of cleaning of fuel lines,replacement of M-oil, Air and Diesel filter etc .This includes checking the electric wiring, earthing etc and providing and filling of Engine-oil , Coolent. Further the Job includes running the system minimum for 3 hours for primary testing. The job includes replacement cost on account of Engine oil =11 ltrs.Coolant =3.5 Ltrs ( concentrated )grease, dhoti cloth, labour, tools, testing and other consumables items etc. as per site requirement . 25 KVA ,40 KVA ,60.5 KVA and 62.5 KVA

Providing and fitting of Battery 88-100Ah 12V along with battery lead 1m, battery teminals, copper thimbles etc as per site requirement.

Bore-well yield check/testing: The job includes thorough checking of Submersible pumping Unit and Control Panel for cable connections, wiring and earthing at the site installed at the site and running of the equipment for a period of 03 hrs to check the yield of the Bore-well. The job includes the cost 50 L of HSD along with its carriage to the site. This also includes providing and fitting necessary copper thimbles, PVC tapes)as per site requirement.

Job for restoration of Modular control panal with starter

Photography and video recording of day to day activities during execution and testing of Saffron work as per site requirement. The firm shall provide video recordings/ still photographs of saffron work in a Fresh Pen drive of 8GB (01No.), including post card size colour printed copies of Geo tag photographs on photo paper (Minimum 20No's).One job for each well

Providing and Laying of 3.5 Core 50 mm2 XLPE aluminium armoured cable. The Job includes providing and fittings of aluminium thimbles (10 m for each Bore well scheme no. 91,96 )

Jobs for restoration of Submersible Pumping Unit and allied works

Provision for Dismantling /Extraction of Submersible Pump Motor asembly along with all the column pipes along with steel wire rope and submersible cable from well casing pipes using heavy duty tripod stand, chain pulley block etc. The pipes are to be clamped and then dismamtled/extracted one by one after removing nuts, bolts, washers etc. The job is to be carried out utilizing the service of skilled manpower with utmost care without causing damaged to the eqipment.The job also includes checking all fittings, Pump holding steel rope.

Provision for Lowering of Submersible Pump Motor assembly along with all the column pipes along with new steel wire rope after replacing worn out nuts, bolts, washers etc. Checking of suction and delivery of pumping unit, bearing, impeller cleaning, removing of rust and silt, replacement of wornout bearings and water seals.This also includes conducting necessary repairs to the electric circuit .Provsion for supply, fitting ,testing and commissioning of 3-core 10sqmm copper submersible cable ( min 30 mtrs ) including copper thimbles ( as per site requirement ).

Provisions for conducting repairs to submersible pumping Unit of varying specifications by way of shifting the unit to workshop, dismantling and extraction of old/ burnt out copper coil from the starter and complete rewinding with new copper wire of specific gauge and size as per the sample. The job also includes providing and fitting of required bearings and mechanical seals 02 no. in place of extracted old damaged ones. . The job includes cost on account of technical men required for rewinding with all risk allowances, shifting of repaired motor to site and installation. The rate includes rebate on old scrape to be retained by contracting agency. Provision for conducting repairs multistage submersible pump by way of dismantling of pump parts/ stages checking of impellers of every stage and replacement of damaged/ worn out parts as per sample. The job includes providing and fitting of Gun metal bushes and Stainless steel sleeves for all the stages. The job further includes reassembling of pump stages, coupling of motor with pump and shifting it back to site and testing on full load. (Assuming 50 % of the total schemes requiring the above detailed job based on industrial experience)

Jobs for restoration of Submersible Pumping Unit and allied works

Supply, Installation, Testing and commissioning of 80mm Flanged G.I bends. The job includes providing and fitting of nut- bolts, washers and rubber gaskets of required specifications. All the required tools and tackles are to arranged by the firm.(For Bore well :96)

Supply, Installation, Testing and commissioning of 80mm Flanged G.I TEEs. . The job includes providing and fitting of Blind Flange, nuts, bolts, washers and rubber gaskets of required specifications. All the required tools and tackles are to arranged by the firm. (For Bore well 96)

Supply, Installation, Testing and Commissioning of 80mm, PN-1.0/10, cast iron double fanged in built sluice valve non rising type with hand wheel.(For Bore well :91,96)

Supply, Fitting, Testing and commissioning of 3core 10 sq. mm copper submersible cable. Including copper thimbles as per site requirement.(15m each for Bore well 91, 96,)

Provision for re-development of Bore well schemes

Provision for Redevelopment of the Bore well schemes in accordance with IS-11189(1985) to establish maximum rate of usable water yield with required capacity air compressor. The Job includes targeted/ continuous delivery of compressor air at different depths/slots of casing pipe, till the desired quality and improved discharge of water is obtained from the well. The job is to be carried out using Air compressor of pressure rating 1100psi with a delivery of 600cfm. The job also includes hiring, running charges of air compressor, tools and accessories etc

SITC of multistage Horizontal pumping Unit and allied works and provision for servicing and repairs of horizontal Pumping unit.

Supply, Installation, Testing and Commissioning of Horizontal Centrifugal end suction pumping unit coupled with suitable capacity motor, of varying Discharge and Head capacities for 02 No. of Bore well schemes in District Pulwama), including: Discharge :- 19.27 m³/hr Head :-73 mtrs 1. MS Base Frame 2. Coupling (MS & TC) 3. Anti-vibration pads (For Bore-well No. 91 and 96)

Supply, Fitting, Testing & commissioning of flanged G.I "B" Class suction/ delivery pipe of size 65/80 mm along with washers, nuts and bolts (3m length pipe each for suction and delivery).

Providing and fixing CI NRV 65/80mm of approved quality.

Supply, Fitting, Testing, and commissioning of 65/80 mm flanged GI bends (02 no. of bends)

Supply, Fitting, Testing, and commissioning of flanged reducer of suitable Size including washers, nuts and bolts as per site requirement. (02 no. of reducers)

Supply, Installation, testing, and commissioning of PVC Priming Tank of 200 ltr capacity ISI : 12701 marked, including all fittings for 20mm pipe such as GI Nipples(20mm 100mm long, 04 No.), ball valve( gun metal 20mm, 02 No), Bends (20mm, 06No.), GI Piping (20mm, 15m Length ) , Sockets(20mm, 6No.) union (20mm 04 No.) etc and MS stand on which above mentioned Tank can rest (fabricated out of ISA 35x35x5 of minimum height 5' )as per site requirement. Connection of priming tank with the delivery of submersible pumping unit by way of providing and fitting 20mm GI pipe (heavy) and with the delievery of Horizontal Pumping unit by necessary welding and using sockets/nipples as required.The length of the pipe is approximately 15m as per site requirement

Supply, Fitting, Testing and commissioning of 3core 16 sq. mm copper submersible cable. Including copper thimbles as per site required (20m cable for 01 no. of Bore wells)as per site requirement.

Servicing and conducting necessary Repairs to Horizontal pump by way of disconnecting the pumping unit from electric circuit, dismantiling of pump from motor and extraction of old/damaged bearings and coupling from the pump using bearing puller, blow lamp for heating purpose for easy removal of the damaged bearings without causing any damage to the bearing seats. The job includes providing / fitting of new bearings, coupling and gland packing with proper greasing etc. as per site requirement. The cost includes on account of all tools, tackles, skilled labor component with all transportation charges and reassembling of the pumping unit, connecting with electric circuit.

Assembling of head unit inside pump house of Bore well

Supply, Installation, testing and commissioning of sand filter 20m3/hour/25m3/hour Assembly of Suitable capacity with back wash assembly including fil

Supply, Installation, testing and commissioning of Screen filter Assy. 20m3/hour/25m3/hour of suitable capacity, epoxy coated metal of higher engineering plastic in cylindrical shape equipped with interchangeable perforated filtering elements working at a pressure of PN-10 with degree of filtration 60-200 mesh (75 microns).

ling of filter media in head unit as per site requirement. (BW-19, 91, 96)

Supply, Installation, testing, and commissioning of MS Fertilizer Tank of capacity 90 litres with fertilizer venturi injectors, coated with more than 70 micron thick colour epoxy powder from both inside and outside surface for protection against corrosion and weather effects, innovative turbulent inlet ensuring through mixing of chemicals/fertilizers , special drain port to flush the Tank, 200mm wide opening for easy pouring of stock solutions, high pressure hose assembly (inlet/ outlet connections), having working pressure not less than 2kg/cm2 .

Supply, Instalation, Testing and commissioning of HDPE end cap 110 mm

Supply, Installation, testing and commissioning of Pressure Relief valve with additional pressure control knob (pilot fitted) in head unit as per site requirement.

Supply, Installation, testing and commissioning of Air Release valve 25 mm double acting male threaded with complete assembly in head unit as per site requirement.

Supply, Installation, testing and commissioning of pressure gauge (50 mm dial glycerine filled metallic) in head unit as per site requirement.

Supply, Installation, testing and commissioning of 25mm ball valve brass in head unit as per site requirement.

Supply, Installation, testing and commissioning of 50/65mm dia Control valves including rubber washers for head unit excluding the cost of Nuts and bolts. The control valves are to be installed as per the site requirement.

Providing and Fitting of GI Nipple 50mmx100mm including cutting as per site requirement.

Providing, fitting and testing of required size 50/65mm NB GI Bend for assembling various components of head unit as per site requirement. The job includes cost on account of welding, cutting, skilled labour etc. as per site requirement.

Providing and fitting of 50/65mm NB Gun Metal Gate valve with C.I wheel of approved quality ( Screw end) as per site requirement.

Supply, Providing, fitting and testing 50mm NB MS flange with 50mm NB GI Pipe and GI Bends for assembling various components of head unit as per site requirement.

Providing and fitting of GI Nipple (25mmx150mm) as per site requirement.

Providing and fitting of GI Hose Nipple (20mm x 50mm) as per site requirement.

Providing, fitting and laying of 100 mm Nominal Bore (Class B) GI Pipe with fittings for sleeve to the exposed main/ envisaged road cuts. The sleeve is to be embedded in excavated trench as per the site requirement.

Provision for Reassembling of Head Unit/ Filtration unit installed inside the Pump House. The job includes welding, cutting and assembling the entire filtration unit and priming tank components. The job also includes cost on account of skilled labour, Teflon taping, all necessary tools and tackles etc.

Restoration/Rectification network along with fitting, controls for a typical command area comprising of 49 segments of 0.42 hectares for 08 Bore well schemes

Supply, Installation, testing and commissioning of Hydro cyclone filter 20m3/hour/25m3/hour assembly of Suitable capacity, Mild steel construction powder coated with 70-80 micron thick coloured pure polyester from both inside and outside surface for protection against corrosion and weather effects. Hydro-dynamically designed to create centrifugal action to separate particles heavier than water to remove fine sand and silt particles of higher size than 75 micron.

Supply, Laying and jointing of 90 mm dia PN-8/6 HDPE pipes through hot plate welding process as main /sub-main pipe lines inside the already excavated trenches wherever rectification of piping network and HDPE risers for control valves/flush valves etc. is required The job includes skilled labor, hot plate welding equipment, arrangement of power supply/Generator, fuel, necessary tools and tackles with all leads and lifts.( well No.

Supply, Laying and jointing of 110 mm dia PN-8/6 HDPE pipes through hot plate welding process as main /sub-main pipe lines inside the already excavated trenches wherever rectification of piping network and HDPE risers for control valves/flush valves etc. is required The job includes skilled labor, hot plate welding equipment, arrangement of power supply/Generator, fuel, necessary tools and tackles with all leads and lifts.

Earth work excavation in trenches (manual excavation) up to minimum depth of 2 feet underground with adequate width in all types of Soil which may range from 12'' for straight alignment of pipes to be laid underground to 18'' at joining spots for laying of HDPE pipeline Main of size 90 mm and Sub-main of Size 75 mm. The job includes refilling of the excavated soil after laying of pipe line and its ramming. The trench work is to be executed wherever rectification is required as per site requirment.( 60 cum per well approx.)

Supply, Laying and jointing of 75 mm dia PN-8/6 HDPE pipes through hot plate welding process as main /sub-main pipe lines inside the already excavated trenches wherever rectification of piping network and HDPE risers for control valves/flush valves etc. is required The job includes skilled labor, hot plate welding equipment, arrangement of power supply/Generator, fuel, necessary tools and tackles with all leads and lifts.

Supply, Installation, testing and commissioning of 90 mm dia PN 10 HDPE elbows. The job includes welding of elbows through hot plate welding process with the HDPE main/sub-main pipe/HDPE risers and other requisite spots wherever rectification of network is required as per te site layout drawing The job includes skilled labour, hot plate welding equipment, arrangement of power supply/ Generator, fuel, necessary tools and tackes with all leads and lifts.

Supply, Installation, testing and commissioning of 110 mm dia PN 10 HDPE elbows. The job includes welding of elbows through hot plate welding process with the HDPE main/sub-main pipe/HDPE risers and other requisite spots wherever rectification of network is required as per te site layout drawing The job includes skilled labour, hot plate welding equipment, arrangement of power supply/ Generator, fuel, necessary tools and tackes with all leads and lifts.

Supply, Installation, testing and commissioning of 75 mm dia PN 10 HDPE elbows. The job includes welding of elbows through hot plate welding process with the HDPE main/sub-main pipe/HDPE risers and other requisite spots wherever rectification of network is required as per te site layout drawing The job includes skilled labour, hot plate welding equipment, arrangement of power supply/ Generator, fuel, necessary tools and tackes with all leads and lifts.

Supply, Installation, testing, and commissioning of 75 mm dia HDPE TEEs. The job includes welding of TEEs through hot plate welding process with the HDPE main/sub-main pipe/HDPE risers and other requisite spots as per site requirement. The job includes skilled labour, hot plate welding equipment, arrangement of power supply/Generator with fuel, necessary tools and tackes with all leads and lifts.

Supply, Installation, testing, and commissioning of suitable size HDPE Reducer The job includes welding of Reducers through hot plate welding process with the HDPE main/sub-main pipe and other requisite spots as per layout drawing. The job includes skilled labour, hot plate welding equipment, arrangement of power supply/Generator with fuel, necessary tools and tackles with all leads and lifts.

Providing, fitting/ welding and testing of 50/65mm Nominal Bore (Class B) GI Pipe for assembling various components of head unit as per site requirement. The job includes cost on account of welding, cutting, skilled labour etc.

Supply, Installation, testing and commissioning of 75mmx32mm HDPE Service Saddle on HDPE Sub-main pipes at requisite spots wherever rectification is required as per site requirement. The job includes skilled labour, drilling equipment/ necessary tools and tackles with all leads and lifts.

Supply, Instal

Supply, Installation, testing and commissioning of Compression Male Threaded Adaptor 32mm on Sub main pipeline wherever rectification of pipe network is required as per layout drawing and site requirement.

lation, testing and commissioning of 90mmx32mm HDPE Service Saddle on HDPE Sub-main pipes at requisite spots wherever rectification is required as per site requirement. The job includes skilled labour, drilling equipment/ necessary tools and tackles with all leads and lifts.

Supply, Installation, testing and commissioning of 90 mm dia HDPE Tail Piece by hot plate welding.

Supply, Installation, testing and commissioning of 110 mm dia HDPE Tail Piece by hot plate welding.

Supply, Installation, testing, and commissioning of 110 mm dia HDPE TEEs. The job includes welding of TEEs through hot plate welding process with the HDPE main/sub-main pipe/HDPE risers and other requisite spots as per site requirement. The job includes skilled labour, hot plate welding equipment, arrangement of power supply/Generator with fuel, necessary tools and tackes with all leads and lifts.

Supply, Installation, testing and commissioning of 110mmx32mm HDPE Service Saddle on HDPE Sub-main pipes at requisite spots wherever rectification is required as per site requirement. The job includes skilled labour, drilling equipment/ necessary tools and tackles with all leads and lifts.

Supply, Installation, testing and commissioning of 65 mm dia Control valves including rubber washer on HDPE pipe (75mm dia) as sectional and isolation valves excluding the cost of Nuts and bolts. The control valves are to be installed as per site requirement wherever rectification is required.

Supply, Installation and testing and commissioning of 75 mm dia PN-10, HDPE Flange.

Providing and fitting of Nut and Bolts along with washers

Supply, Instalation, Testing and commissioning of Male threaded adaptor 90 mm along with threaded End cap (Flush Valve).

Supply, Instalation, Testing and commissioning of Male threaded adaptor 110 mm along with threaded End cap (Flush Valve).

Supply, Installation, testing and commissioning of 75 mm dia HDPE Tail Piece by hot plate welding.

Providing and fitting of MS Flat 35x5mm by way of welding with the J-Hooks to secure the damages to the CGI Shed ( Approx. 100 kg. each)

Supply, Instalation, Testing and commissioning of HDPE end cap 75 mm

Supply, Instalation, Testing and commissioning of HDPE end cap 90 mm

Supply, Instalation, Testing and commissioning of Male threaded adaptor 75 mm along with threaded End cap (Flush Valve).

Supply of LLDPE pipe Nominal diameter 32mm class II ( aprox. 2000 mtr. Each well)

Supply of HDPE Compression Tee 32mm

Supply of HDPE Compression End cap 32mm

Supply of HDPE Compression Elbow 32mm

Supply of HDPE Compression Joiner 32mm

Successful Testing and Commissioning of complete Bore well scheme segment wise which includes testing of 32 mm ND LLDPE pipe as lateral lines 32 mm Compression fittings like end caps, tee's, joiner, bends and Rotating Head Mini Sprinklers with MS risers, Vinyl tubings, stake assemblies. The job includes cutting, punching and lying of LLDPE Pipe as per site requirement and testing of one Segment. Further the job includes dismantling and proper stacking of lateral lines (LLDPE pipe network) including compression fitting and sprinkler assembly after successful testing of Bore well scheme. Fuel, necessary POLs for testing, operation of D.G Set, Pumps (Submersible and Horizontal) and monitoring of Pump house during operation is to be provided and arranged by the Firm.

Other allied Jobs

Repairs to existing CGI shed at site which includes repairs to CGI door, CGI roofing/ covering, locking system by way welding, fasteners etc. It also includes providing and fixing of G. S. sheet (Approx qty 10 Sqm/Bore-well of 0.63 mm thickness with zinc coating not less than 350 gram/m2) ( Fore Bore-well No. 19)

Provision for bush cutting near the vicinity of Bore-well/ DG Set Shed and CGI Shed/ Pump Housing. (For 01 No. of Bore-well Schemes) as per site requirement.

Supply, Installation and testing and commissioning of 90 mm dia PN-10, HDPE Flange.

Supply, Installation and testing and commissioning of 110 mm dia PN-10, HDPE Flange.