COMPREHENSIVE B/R REPAIR TO MD/OTM ACCN, REPAIR TO SEWAGE LINES, SEPTIC TANK, REPAIR TO WOODEN/STEEL FURNITURE AND REPAIR TO HARD STANDING PAVER, BLOCKS ETC AT ARO GUNTUR UNDER AF STN SURYALANKA

Amount

Taking down cement or cement lime plaster, any description, on brick walls including racking out joints hacking for key scrubbing down with water etc. complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick or concrete in CM 1:6 finishing even and smooth with out using extra cement etc. complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surface finishing even and smooth with out using extra cement complete all as specified and as directed.

M&L for rendering 5mm thick on fair faces of concrete surfaces in cement mortar 1:3 in ceiling surface finished even and smooth with out using extra cement etc. complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of colour wash complete all as spd and as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer etc. complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceilings and applying three coats of white wash etc. complete all as specified and directed.

M&L preparing old surfaces of walls plastered or plastered including brooming down or wire brushing, scrapping down and applying one coat of white wash complete all as specified and as directed.

M&L preparing old surfaces of ceilings, plastered or plastered including brooming down or wire brushing, scrapping down and applying one coat of white wash complete all as specified and as directed.

M&L preparing old surfaces of walls plastered or plastered including brooming down or wire brushing, scrapping down and applying one of OBD complete all as spd and as directed.

M&L preparing old surfaces of walls plastered or plastered including brooming down or wire brushing, scrapping down and applying one of colour wash complete all as spd and as directed.

M&L preparing old steel surfaces of any description, over 10cm in width or girth, applying one coat of synthetic enamel paint to match existing surfaces complete all as spd and as directed.

M&L preparing old wooden surfaces of any description, over 10cm in width or girth, applying one coat of synthetic enamel paint to match existing surfaces complete all as spd and as directed.

Taking down chowkats or frames (without taking off shutters from frame ) not exceeding 1.5 sqm each all as specified and directed. (including cutting holes for removing / inserting hold fasts and making good disturbed portions with PCC 1:2:4 type B-0 or in CM 1:4 after re fixing of frames) complete all as specified and as directed.

Taking down shutters of any description exc 1.00sqm and n.exc 2.00sqm each etc. complete all as specified and directed

S&F of Pressed steel frames 75 x 50 mm size for cup boards with one rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed etc. complete all as specified and directed

M&L for Plain cement concrete 1:3:6 type C-0 using 12.5 mm graded stone aggregate for filling of hollow portions of door frames etc. complete all as specified and directed.

S&F of 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides etc. complete all as specified and directed.

S&F of 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed.

M&L for anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc., complete all as specified and directed by Engineer-in-charge.

S&F of powder coated anodised aluminium window and ventilator glazed and Guzed shutters, side hung type without sash bars aluminium sections weighing 0.55 kg/s (standard aluminium section of DG-2496 of sizes 39.4 x 17.7 mm and 1.2 mm thick (min) including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21, 100mm long (2Nos), suitable handle (1Nos) for each shutter complete all as specified and directed by Engr-in-charge.

S & F in repairs of Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or wooden/aluminium beedsetc. complete all as specified and directed.

S&F of 4 mm thick Sheet Glass, ordinary quality and glazing fixed with aluminium beads,sqare exc 0.50sqm in each pane etc. complete all as specified and directed

S&F 200 mm long Aluminium anodised barrel tower bolts of extruded aluminium section etc. complete all as specified and directed

S&F 150 mm long Aluminium anodised barrel tower bolts of extruded aluminium section etc. complete all as specified and directed

S&F of 150 mm long Aluminium alloy handles cast type anodised etc. complete all as specified and directed

S&F 100 mm long Aluminium butt hinges extruded aluminium alloy with galvanised steel wire pin anodised, type C-22 etc. complete all as specified and directed.

S&F 75 mm size Hasp and Staple aluminium anodised safety type with pin hinge including bolt to hinge plate and fixed with screws etc. complete all as specified and directed.

S&F of 300 mm long aluminium alloy anodised sliding door bolts with hasp and staple (bolt type) and fixing clip of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy etc. complete all as specified and directed.

S&F of curtain rods (drapery rods) not less than 25 mm dia, anodised aluminium alloy with fixing brackets fixed in repairs etc. complete all as specified and directed.

S&F of factory made PVC Solid Door frame of size 50mmx47mm made out of 5mm plain coloured PVC sheet reinforced with MS Square tube, fixed in opening as per specification and drawings etc. complete all as specified and directed.

S&F of Factory made Solid panel PVC Door Shutter of 30mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colourr PVC 'C' channel having a PVC sheet strip 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Paneling of plain color PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beeding and jointed together with solvent cement as per specification and drawing etc. complete all as specified and directed.

S&F in repairs 150mm size aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed fixed as in repair

S&F in repairs 100mm size aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed fixed as in repair.

S&F in repairs 100mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed fixed as in repair.

S&F in repairs 150mm size aluminium alloy handles of extruded section,fabricated type complete all as specified and as directed fixed as in repair.

S&F for floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn sreel spring fixed in floor of overall length of cover plate 150mm fixed in repairs complete all as specified and as directed.

M&L for Preparing new or previously un treated surfaces of wood and wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer etc. complete all as specified and directed

M&L for preparing new or previously untreated surfaces of steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer etc. complete all as specified and directed

Dismantling of old water tank exc 250 Ltr & n.exc 500 Ltr capacity and removing from store etc complete all as specified and as directed.

S&F rotational moulded polyethylence water storage tanks IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 500 Ltrs capacity with and including 20mm dia Ball brass valve high pressure with polythene float and flu nut screwed for iron pipe or brass and fixed etc complete all as specified and as directed.

S&F in repairs bib taps, CP fancy type with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule of 15 mm bore dia and fixed complete all as specified and directed.

S&F as in repair fancy type 15 mm bore pillar taps Cast copper alloy, with capstan heads chromium plated, screwed dodn high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed all as specified and directed by Engr-in-Charge.

S&F of 10 lit capacity PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polythene of low/high density PVC 32mm dia for low level cistern complete, fixed in repairs, all as specified and directed by Engineer-in-Charge.

S&F in repairs Vitreous China wash basin, white, flat back, of size 550x400 mm excluding taps, waste chain and plug and porcelain stopper but including brackets and brass, 32 mm dia chromium plated waste fitting and 32 mm bore PVC waste pipe all as specified and directed by Engineer-in-Charge.

S&F in repairs 15 mm dia stop valve/angle valve cast copper alloy screwed down high pressure, with crutch or butter fly handles, screwed both ends for iron pipe with CP fancy type complete all as specified and as directed.

S&F of PVC connections 15mm size with PTMT nuts of length 450 mm etc. complete all as specified and directed.

S&F of Towel rail 600 mm long of PTMT minimum weight 190 gms, fixed with and including chromium plated brass screws and wooden / plastic cleats etc. complete all as specified and directed.

Cleaning the Septic tank of 25 Users capacity by dewatering all the water, taking out sludge, rigid soil by mobile tank cleanes and shifting/removing outside MOD land, flushing the septic tanks with clean water in order to remove all slaked mud sludge etc cleaning the tanks with bleaching powder solution and surface dressing all around the septic tank to distance not exceeding 3 mtr complete all as spd and as directed.

Cleaning of Manhole of any size & depth and remove the all sediment material outside of MOD land by Contractor's own arrangement and placing back of covers complete all as spd and as directed.

Cleaning of Sewage lines of dia 100/150 mm by rodding manually or mechanically means and taking out sludge, rigid soil and removing outside MOD land by Contractor's own arrangement complete all as spd and as directed.

Excavation in trenches, n.exc 1.5m wide and n.exc 1.5m in depth for replacement of sewage lines ang getting out soft/loose soil etc. complete all as specified and directed.

Demolition and breaking up drain pipe 150mm dia (salt glazed ware, AC or reinforced concrete) set in cement mortar including bedding and hunching complete all as spd and as directed.

M&L for Plain cement concrete bed 100mm thick for 150mm bore drain pipes in 1:4:8, type D-2, using 40mm graded stone aggregate including packing under and hunching against the sides of pipes of after they are laid and tested complete all as spd and as directed.

Salt glazed stone ware drain pipes, Grade "A", 150mm dia (internal dia) laid in trenches and jointed with CM 1:1 complete all as specified and as directed.

Cutting in to existing manholes for connectingnew drains, making good topipe and rendering,cutting out exisiting benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required for 150mm dia pipe etc. complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm in soft/loose soil etc. complete all as specified and directed.

Removing excavated soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and directed.

Demolition of Brick work built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facings, dressed stone work and precast concrete articles complete all as directed.

M&L for Brickwork with sub-class `B' old size bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4 etc. complete all as specified and directed.

M&L Plain cement concrete 1:2:4, type B-0 using 12.5mm graded stone aggregates as in coping including necessary formwork, weathering, slightly rounded or chamfered angles, finishing of exposed surfaces of concrete to even and smooth without using extra cement complete all as spd and as directed.

Demolition of reinforced cement concrete of any description and in any position ( reinforcement cut as required to facilitate demolition ) including removal of demolished material out side MD land complete all as specified and directed by Engr-in-Charge.

M&L for pre-cast RCC 1:2:4, type B-1 using 20mm graded stone aggregates as in cover slabs sets in CM 1:6 including all necessary formwork. Exposed surfaces of concrete shall be finished even and smooth without using extra cement complete all as spd and as directed.

M&L for TMT steel bars 8mm dia cut to length bent to shape required including cranking, hookin ends and binding with mild steel wire (annealed not less than 0.90mm dia) complete all as spd and as directed.

Cement concrete in surface channels and drains type C-2 1:3:6(40mm graded stone aggregate) etc. complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on other than fair faces of brick work, finished the surfaces even and smooth without using extra cement etc. complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick or concrete in CM 1:4 finishing even and smooth with out using extra cement etc. complete all as specified and directed.

M&L for Cleaning and removing all scale and dirt, etc, from tanks of capacity exc 250 n exc 500 liters and from mouths of circulating pipes, etc. complete all as specified and directed

M&L for Cleaning and removing all scale and dirt, etc, from tanks of capacity exc 500 n exc 1000 liters and from mouths of circulating pipes, etc. complete all as specified and directed

S & F Locking Device including locking rods for Almirah large steel including removing of unserviceable locking device complete all as specified and directed.

S & F steel Handle 150mm long, for Almirah large steel including removing of unserviceable Handle complete all as specified and directed.

S & F lock of size 65mm X 55mm universal type 6 lever made out of mild steel, powder coated for Almirah large steel/Almirah medium steel including removing of U/s lock complete all as specified and directed.

All as Item No 1 above but Almirah medium steel

S & F handle 100mm long of mild steel chromium plated for locker bed side steel including removing of U/s handle complete all as specified and directed.

S & F hasp and staple 75mm long mild steel chromium plated for locker bed side steel including removing of U/s hasp and staple complete all as specified and directed.

S & F of shelves of rack shoe steel with all necessary workman ship like cutting bending making holes and welding including removing of unserviceable shelves and apply two coat of synthetic enamel paint black with spray compressor complete all as specified and directed.

S&F GI Charpoy Long Rail of GI Pipe 32mm Bore (dia) Medium Grade duly Threaded Both Ends upto the required Length and fitted to frame of Charpoy including taking out U/s long rail from 3-way elbow by unscrewing, complete all as specified and directed.

S&F GI Charpoy Short Rail of GI Pipe 32mm Bore (dia) Medium Grade duly Threaded Both Ends upto the required Length and fitted to frame of Charpoy including taking out U/s short rail from 3-way elbow by unscrewing, complete all as specified and directed.

S&F GI ELBOW 3-WAY, ISI Marked suitable for GI Pipe 32mm Bore (dia) of GI CHARPOY including Taking out U/s GI ELBOW from the Frame, complete all as specified and directed.

S&F MS Flat 20mmX3mm thick to charpoy GI Pipe 900 mm long with nut and washer, including Taking out U/s flat from the Frame, complete all as specified and directed.

S&F in repair ply wood top of size 2000 mm x 900 mm x 12 mm for charpoy GI Pipe with screws, Nut and Washer including taking out the U/s items complete all as specified as directed.

M & L preparing external and internal surface of following steel furniture's including de-rusting/scratching, paste applying putty, sanding, etc. and applying spray painting with two coats of synthetic enamel paint using spray guns, over a coat of red oxide primer , (existing colour/required colour) complete all as specified and directed.

Almirah Large steel

Almirah Medium steel

Chair CB steel with Arms

Removing of U/s top of TABLE DINING 6 PERSONS and S&F table top ISI marked, 18/ 19mm thick, prelaminated particle board, one side with decorative choice and other side balancing white lamination with 4mm thick teak wood edging all around duly french polished complete all specified and directed.

M&L for replacement of damaged each leg of TABLE DINING 6 PERSONS with 1st class hard wood legs duly french polished complete all specified and directed.

M&L for replacement of U/s Table bed side shelf with 12 mm thick prelaminated particle board, exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination with 4mm thick teak wood beading complete all specified and directed.

Removing of U/s mirror (size 3' x 1.5') for dressing table ladies with and S&F new mirror of same size and shape as per drawing etc. complete all as specified and directed.

Removing U/s knob for dressing table ladies with mirror and S&F new chromium plated knob 40mm dia/size complete all specified and directed.

Removing U/s leg for dressing table ladies with mirror and S&F new leg made of 1st class HW, duly french polished complete all specified and directed.

Removing of U/s top (size 1.5' x 1') of Peg Table and S&F table top ISI marked, 18/ 19mm thick, prelaminated particle board, one side with decorative choice and other side balancing white lamination with 4mm thick teak wood edging all around duly french polished complete all specified and directed.

Removing of U/s top of Teapoy and S&F table top ISI marked, 18/ 19mm thick, prelaminated particle board, one side with decorative choice and other side balancing white lamination with 4mm thick teak wood edging all around duly french polished complete all specified and directed.

Removing of U/s plywood top of size 8'x'3'x 12mm for BED Hard and S&F new 12mm thick commercial plywood BWR grade, ISI marked complete as per drawing etc. complete all as specified and directed.

M&L for replacement of damaged short rail for BED Hard with new short rail made of 1st class HW, duly french polished complete all as specified and directed.

M&L for replacement of damaged head board for BED Hard with new head board made of 4 mm thick plywood BWR grade, one side teak facing complete all as specified and directed.

M&L for replacement of damaged foot board for BED Hard with new foot board made of 4 mm thick plywood, BWR grade, one side teak facing complete all specified and directed.

M&L for replacement of damaged leg for BED Hard with new leg made of 1st class HW, duly french polished complete all specified and directed.

Removing U/s foam cushion and S&F 21" x 22" x 100 mm thick new foam cushion of 40 Kg/Cum density complete all as specified and as directed.

Removing U/s tapestry cloth and S&F best quality duly stitched new tapestry cloth chain in one side for foam cushion complete all as specified and directed as per drg and as approved by GE.

Removing of U/s top (size 2' 6'' x 2') of TV Trolly and S&F new 18/ 19mm thick, ISI marked, prelaminated particle board, one side with decorative choice and other side balancing white lamination with 4mm thick teak wood edging all around duly french polished complete all specified and directed.

Removing of U/s leg of Chair Dining and S&F new front leg made of 1st class HW, duly french polished complete all specified and directed.

Removing of U/s front/Side/Back rail of Chair Dining and S&F new front rail made of 1st class hardwood, duly french polished complete all specified and directed.

Removing of U/s front/Upper Back stiffener of Chair Dining and S&F new front/upper back stiffener made of 1st class hardwood, duly french polished complete all specified and directed.

Removing of old unserviceable plastic cane from seat and back of chair Verandah and recanning of seat and back with 4mm wide half round plastic cane of best quality Godrej pattern, complete all as specified and directed.

Removing of U/s plastic cane from Chair Dining and recanting the same with new half round white colour 2mm cane, 4mm cane for border in godrej pattern. The caning work shall consist of four strand in each holes all as per drawing etc. complete all as specified and directed .

All as per serial item no. 105, above but for Chair Easy.

Demolition of plain cement concrete (un-reinforced) of any description and in any position not other wise specifically provided for, including removal of demolished material out side MD land complete all as specified and directed by Engr-in-Charge.

M&L for hardcore of gauge n.exc 63mm, with broken stone/boulders deposited, spread and leveled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as spd and as directed.

M&L 75mm thick cement concrete type D-2 1:4:8 (40mm graded aggregate) as in sub base complete all as specified and as directed.

M&L for Sand filling under floors/pavings, below tiles, including watering and consolidation complete all as specified and as directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment complete all as specified and directed.

M&L for 100mm thick plain cement concrete 1:2:4 mix type B-2 (using 40mm graded stone aggregates) as in floors, hard standings, paving's etc surface finished evev and fair with out using extra cement complete all as specified and as directed

M&L for cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in bencing of chequered tiles including slightlly rounded do chamfered angles and throating complete all as specified and as directed by Engr-in-Charge.

PAVANI INFRAS