Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.9 LAccepted-AOC | ₹3.9 L | L1 | Accepted-AOC L1 |
| 2 | L2₹4.2 L+₹35,083.40 (9.06%)Rejected-Finance | ₹4.2 L+₹35,083.40 (9.06%) | L2 | Rejected-Finance L2 |
| 3 | L3₹4.5 L+₹59,357.97 (15.3%)Rejected-Finance | ₹4.5 L+₹59,357.97 (15.3%) | L3 | Rejected-Finance L3 |
| Sl No | Description | Qty | Unit | SREEJITH KS L1 | Muraleedharan AR L2 | Sijo John C. L3 |
|---|---|---|---|---|---|---|
| 1.00Maintenance | ||||||
| 1.00 | 10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 120.47 | kilogram | 105.02 ₹12,651.97 Lowest | 115.5 ₹13,914.52 | 120 ₹14,456.64 |
| 1.00 | OD425903/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required. | 126.88 | sqm | 563.96 ₹71,555.24 Lowest | 614.89 ₹78,017.24 | 630 ₹79,934.4 |
| 1.00 | OD425902/2025-2026:providing and fixing UPVC rainwater gutters 150*100 mm approved make including cost of necessary fittings labour for fixing , scaffolding charge etc .complete | 31.7 | metre | 339.34 ₹10,757.08 Lowest | 369.9 ₹11,725.83 | 380 ₹12,046 |
| 1.00 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 93.96 | sqm | 149.69 ₹14,064.87 Lowest | 163.21 ₹15,335.21 | 165 ₹15,503.4 |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.32 | cum | 8,386.26 ₹2,717.15 Lowest | 9,143.61 ₹2,962.53 | 9,300 ₹3,013.2 |
| 1.01 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 870.96 | kg | 209.68 ₹1,82,622.89 Lowest | 228.62 ₹1,99,118.88 | 250 ₹2,17,740 |
| 1.01 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 444.08 | kg | 169.84 ₹75,422.55 Lowest | 185.18 ₹82,234.73 | 190 ₹84,375.2 |
| 1.01 | OD501817/2025-2026:Flooring with Interlocking cabbles 60mm thick (premium) Minimum strength 4 kg/cm2over a bed of 6mm metal filling in 50mm average thick and compacting using earth hammer /compactingmachine hand operated including cost and conveyance of all materials labour charges, , pointing edges etccomplete | 18.5 | sqm | 937.52 ₹17,344.12 Lowest | 1,022.18 ₹18,910.33 | 1,050 ₹19,425 |
Tender Value
₹4.3 L
EMD Value
₹10,662
Closing Date
17 Mar 2026, 1:00 pmClosed
AE
AE
PHC SUB CENTER IMPROVEMENTS
2026_LSGD_845435_1
7/AE/LSGD/2026/EDAKTHUR PHC
Open Tender
Civil Works - Others
Item Rate
THOLUR G P
PHC SUB CENTER IMPROVEMENTS
3 documents required · 3 mandatory
₹945
Yes
₹10,662
Yes
9 Jun 2026
10 Mar 2026
18 Mar 2026
10 Mar 2026
17 Mar 2026
10 Mar 2026
Maintenance
10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
OD425903/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required.
OD425902/2025-2026:providing and fixing UPVC rainwater gutters 150*100 mm approved make including cost of necessary fittings labour for fixing , scaffolding charge etc .complete
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
OD501817/2025-2026:Flooring with Interlocking cabbles 60mm thick (premium) Minimum strength 4 kg/cm2over a bed of 6mm metal filling in 50mm average thick and compacting using earth hammer /compactingmachine hand operated including cost and conveyance of all materials labour charges, , pointing edges etccomplete
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1428681.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.05 MB
BOQ_1428681.xls
BOQ • 0.23 MB
viewsbd.pdf
Tender Documents • 1.63 MB
FORMS.pdf
Tender Documents • 7.19 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .