Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹14.4 L
EMD Value
₹28,722
Closing Date
3 Dec 2026, 5:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
EXECUTIVE ENGINEER
Government of West Bengal Irrigation Waterways Directorate Office of the Executive Engineer Metropolitan Drainage Mechanical Division Jalasampad Bhawan 4th floor Salt Lake City Kolkata700091
Repairing and maintenance of damaged draw shutters of 9 vent and 10 vent sluice at Ghusighata PSHaroa Dist North 24PGS
2026_IWD_5086649_1
WBIW/EE/MDMD/e-NIT-15/2026-27
Open Tender
MECHANICAL
Percentage
GHUSIGHATA
Please refer Tender documents.
5 documents required · 5 mandatory
₹28,722
Yes
18 Nov 2026
18 Nov 2026
4 Dec 2026
18 Nov 2026
3 Dec 2026
18 Nov 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Taking out old existing unserviceable damaged gate shutter of canal/river completely after disengaging from hoisting system completely for installation of new gate shutter. The work includes cutting of gates into suitable pieces by gas cutting, removing the same by mechanical means or suitable crane, stacking all the pieces at the suitable place or as directed by the Engineer in charge upto a lead of 1000 m. The cost includes cost of man power employed for dismantling and cost of consumables like oxygen, accetylene gas, welding rod, hire charges of machineries, like chain pulley block, gas set, grinding machine, welding set, tools & tackles, scaffolding and safety equipments etc including carriage loading & unloading. The cost of complete dismantling of hoisting system & cost of old unserviceable materials handed over to departmental godown including loading & unloading will be provided extra.. Gate shuteer size above 4.00 sq.m upto 8.00 sq.m | 7,940.59 | k.g. | 7.41 | ₹58,839.77 |
| 2 | Fabrication , Supply, erection and commissioning of new Flap/Fall board shutter of Canal/River as per IS: 5620 - 2000/Latest Revision consisting of skin plate, vertical and horizantal grider, stiffener etc. made of MS material consisting of angle , channel, beam, plate, flat, etc. conforming to IS : 2062 -2011/latest revision manufactured as per approved drawing and direction including cost of Materials, Machinaries , Manpower, Cutting, Aligning, drilling, Welding, Finishing, Consumables, Carriages and all overheads with all leads and lifts complete as per specification (without painting). Width of Gate shuteer size upto 4 metre | 6,663.95 | k.g. | 156.13 | ₹10,40,442.51 |
| 3 | Supply of Gear Oil as per direction of Engineer in charge | 38 | ltr | 252.66 | ₹9,601.08 |
| 4 | Supply of Grease | 10 | kg | 294.37 | ₹2,943.7 |
| 5 | Surface cleaning of metal surfaces by chemical cleaners and then by hand with emary paper, wire brush and power tool cleaners and removing dust and preparation o f surface including cost of all materials, labour, machinery, scaffolding, etc., complete with initial lead for sand upto 1 km and all lifts. | 654.24 | Sq.m | 76.28 | ₹49,905.43 |
| 6 | Painting of embedded parts, all types of gates, stoplogs and barscreen/gratings etc on prepared surfaces with one coat of inorganic zinc silicate primer (airless s p r a y preferred)70+/ - 5 micron and two super coats with a total thickness of 300 microns (each 150+/- 5) of solventless coaltar epoxy paint each coat 150 microns ( total 300 microns) including cost of all materials, labour, scaffolding etc., complete with all leads and all lifts. | 654.24 | Sq.m | 201.41 | ₹1,31,770.48 |
| 7 | Fabrication, supply, erection and commissioning of embeded parts consisting of hinge bracket with its accessories for vertical flap gate shutter of distributories/branch canal/minor canal made of MS material consisting of angle, channel, beam, plate, flat, etc. conforming to IS : 2062 -2011/latest revision manufactured as per approved drawing and direction of Engineer in charge. The cost includes cost of Materials, Machinaries , Manpower, Cutting, Aligning, Anchoring, Welding, Finishing, Consumables, Carriage and all overheads with all leads and lifts complete as per specification (without painting). | 284.2 | Kg | 312.25 | ₹88,741.45 |
| 8Supply and fixing of LT panel accessories of approved make in existing LT panel including connections etc. as required as per specification. | |||||
| 8.01 | Supply of 3 pole power contactor type MNX18, 18A current rating | 10 | each | 1,364.61 | ₹13,646.1 |
| 9 | Cost for repairing of vertical/flap gate shutter of canal/river including dismantling the damaged portion at lower part (skin plate, horizental/vertical girder/stifner etc as per IS : 2062 - 2011 /latest revision) not more than 25% of gate hight from bottom by gas cutting and fitting, fixing and fabricated by welding as per direction including cost of Materials, Machinaries , Manpower, Cutting, Aligning, Anchoring, Welding, Finishing, Consumables, Carriage and all overheads with all leads and lifts complete as per specification (without painting) Width of Gate shuteer size upto 2 metre | 188.4 | Kg | 213.33 | ₹40,191.37 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.29 MB
2911i.pdf
Tender Documents • 0.93 MB
BOQ_5212941.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .