HVAC Mechanical Piping and GMP Modular Partition Works for setting up of R and D facility and Lab at Existing Administrative Block of KSDP Alappuzha

Amount

Air Handling Units

Fabrication, Supply, Installation, Testing and commissioning of following Air Handling Units (AHU) with DX cooling using R22, with double finned aluminium cooling coils and dedicated condensation unit, double skin construction fabricated from Al extruded section frame structure with internal coving and in Thermal break construction, the inner skin 0.6MM thick Plain G.I outer skin 0.6mm thick precoated GI constrution with 43 mm thick Puff insulation panel, with G4 fresh air filter, Prefilter section with G4 filters, insulated SS 304 drain Pan,blower section with backward curve DIDW centrifugal fan along with KRUGER /NICOTRA make TEFC squirral case induction motor (IE- 2) with IP 55 protection with base frame, Drive set consisting of taper lock pulleys V-belts and complete with anti vibration mounts, Double skin rexin flexible connection for fan outlet Inspection window, limit switch, light, Fine Filter section with 3micron filters in supply air discharge section. GI damper for Supply, Return, fresh exhaust air and bypass damper. Service doors wherever applicable. provision Differential pressure guage across 10,3micron filters. AHU -01 : 8000 CFM @ 125 MM WC static pressure (Sterlitity testing area) 15 TR

Fabrication, Supply, Installation, Testing and commissioning of following Air Handling Units (AHU) with DX cooling using R22, with double finned aluminium cooling coils and dedicated condensation unit, double skin construction fabricated from Al extruded section frame structure with internal coving and in Thermal break construction, the inner skin 0.6MM thick Plain G.I outer skin 0.6mm thick precoated GI constrution with 43 mm thick Puff insulation panel, with G4 fresh air filter, Prefilter section with G4 filters, insulated SS 304 drain Pan,blower section with backward curve DIDW centrifugal fan along with KRUGER /NICOTRA make TEFC squirral case induction motor (IE- 2) with IP 55 protection with base frame, Drive set consisting of taper lock pulleys V-belts and complete with anti vibration mounts, Double skin rexin flexible connection for fan outlet Inspection window, limit switch, light, Fine Filter section with 3micron filters in supply air discharge section. GI damper for Supply, Return, fresh exhaust air and bypass damper. Service doors wherever applicable. provision Differential pressure guage across 10,3micron filters. AHU - 02 : 6000 CFM @ 100 MM WC static pressure (MICRO TESTING) 10 TR

Fabrication, Supply, Installation, Testing and commissioning of Treated fresh air Unit with DX cooling using R22, with double finned aluminium cooling coils and dedicated condensation unit with required refrigerant piping, double skin construction fabricated from Al extruded section frame structure with internal coving and in Thermal break construction, the inner skin 0.6MM thick Plain G.I amp; outer skin 0.6mm thick pre-coated GI construction with 43 mm thick Puff insulation panel, with G4 fresh air filter at inlet insulated SS 304 drain Pan, blower section with backward curve DIDW centrifugal fan along with TEFC squirrel case induction motor (IE- 2) with IP 55 protection with base frame. Differential pressure guage across 10 micron filters. TFA- 01: 1000 CFM @ 60 MM WC static pressure and cooling capacity of 3 TR. To be hanged on roof or placed on floor as per site condition.

Ventilation Units

SUPPLY RETURN AIR GRILL / DIFFUSER (3 MICRON VENTILATION AREAS) Slab / false ceiling Grill module made out of 18G GI with powder coated finish suitable to fix collar damper and AL perforated grill.

RETURN AIR PERFORATED GRILL (FOR ISO 8 AREA WITH 10 MICRON FILTER) AL linear bar grill with VCD suitable to fix in Grill modules

RETURN AIR PERFORATED GRILL (FOR ISO 8 AREA WITH 10 MICRON FILTER) Slab / false ceiling Grill module made out of 18G GI with powder coated finish with 10 micron filter suitable to fix collar damper and AL perforated grill.

SUPPLY RETURN AIR GRILL / DIFFUSER ( 3 MICRON VENTILATION AREAS) AL linear bar grill with VCD suitable to fix in Grill modules

Supply, Installation, Testing, Commissioning and Validation of Air Handling units with double skin construction fabricated from Al extruded section frame structure with internal coving and in non Thermal break construction, the inner skin 0.6MM thick Plain G.I outer skin 0.6mm thick precoated GI constrution with 25 mm thick puff insulation panel,consisting of Pre filter section for fixing 10micron filter, Fan section with DIDW farward curved Belt driven centrifugal fan (Kruger/Nicotra) driven by suitable NON Flame proof TEFC squirrel cage induction motor (CG/ABB/Kirloskar) with drive set consisting of Taper lock pulleys and V-Belts and complete with anti vibration mounts, Inspection window, limit switch, bulk head lamp, fine filter section suitable for fixing 5 micron filters, Fresh air Louver at inlet, Inlet and outlet connections complete with service doors.VU-02: 3500 CFM @ 60 MMWC Supply and return

Supply, Installation, Testing, Commissioning and Validation of Air Handling units with double skin construction fabricated from Al extruded section frame structure with internal coving and in non Thermal break construction, the inner skin 0.6MM thick Plain G.I outer skin 0.6mm thick precoated GI constrution with 25 mm thick puff insulation panel,consisting of Pre filter section for fixing 10micron filter, Fan section with DIDW farward curved Belt driven centrifugal fan (Kruger/Nicotra) driven by suitable NON Flame proof TEFC squirrel cage induction motor (CG/ABB/Kirloskar) with drive set consisting of Taper lock pulleys and V-Belts and complete with anti vibration mounts, Inspection window, limit switch, bulk head lamp, fine filter section suitable for fixing 5 micron filters, Fresh air Louver at inlet, Inlet and outlet connections complete with service doors. VU-01: 3500 CFM @ 60 MMWC Supply and return.

Exhaust Unit

Supply, Installation, Testing and Commissioning of Single Skin type Exhaust Unit (EAU) made out of 18G GI powder coated consisting of Pre filter section for fixing 10micron filter, Fan section with DIDW forward curved Belt driven centrifugal fan (Kruger/Nicotra) driven by suitable NON Flame proof TEFC squirrel cage induction motor (CG/ABB/Kirloskar) with drive set consisting of Taper lock pulleys and V- Belts and complete with anti vibration mounts, Inlet and outlet connections complete with service doors. EXU-01 500 CFM @ 30 MM WC static pressure

Ducting and Duct Insulation

Ducting works at varying stages to be completed as required. General terms are Supply, Installation, Testing and Commissioning of Factory fabricated GI sheet metal ducting in L section as per IS 635 standards with class VIII sheet MS ductes,supports,suspended rods with complete paint with Silicon sealent for duct joints. (Approximate Quantity ) (Smoke Test/Leak Test)20 G GI SheetLeak Testing, Leak rectification and balancing of existing, installed Duct

Duct insulation chemically Cross linked close cell Polyethyelve CLASS 1 insulation with metalic foil with tape and addicive. ( Approximate Quantity )19 mm thick for supply air duct

Ducting works at varying stages to be completed as required. General terms are Supply, Installation, Testing and Commissioning of Factory fabricated GI sheet metal ducting in L section as per IS 635 standards with class VIII sheet MS duct es supports,suspended rods with complete paint with Silicon sealent for duct joints. (Approximate Quantity ) (Smoke Test/Leak Test)22 G GI SheetLeak Testing, Leak rectification and balancing of existing, installed Duct

Duct insulation chemically Cross linked close cell Polyethyelve CLASS 1 insulation with metalic foil with tape and addicive. (Approximate Quantity )13 mm thick for return air duct

Ducting works at varying stages to be completed as required. General terms are Supply, Installation, Testing and Commissioning of Factory fabricated GI sheet metal ducting in L section as per IS 635 standards with class VIII sheet MS duct es,supports,suspended rods with complete paint with Silicon sealent for duct joints. (Approximate Quantity ) (Smoke Test/Leak Test)24 G GI SheetErection, supporting, leveling, jointing of existing available duct at site which is not erected.

Risers Grill

RISERS GRILLGrill module made out of 18G GI with powder coated finish suitable to fix collar damper and grill.

RISERS GRILLSS 304 perforated grill suitable to fix in the panel riser

RISERS GRILLGI powder coated coller damper to be fixed inside the partition raiser

RISERS GRILLEU-4 filter washable filter for return air raiser (10 micron)

HEPA Modules

TERMINAL HEPA MODULE (ISO -6) AREA\:- SS 304 Perforated grill for the following HEPA Filters size610 x 610 x 150 mm

TERMINAL HEPA MODULE (ISO -6) AREA\:- SS 304 Perforated grill for the following HEPA Filters sizes305 x 305 x 150 mm

TERMINAL HEPA MODULE (ISO -8) AREA:-Gel Seal type latest and advanced technology HEPA filters having effeciency of 99.97 down to 0.3 micron.610 x 610 x 150 mm

TERMINAL HEPA MODULE (ISO -8) AREA:-Gel Seal type latest and advanced technology HEPA filters having effeciency of 99.97 down to 0.3 micron. 305 x 305 x 150 mm.

TERMINAL HEPA MODULE (ISO -8) AREA:-Gel Seal type latest and advanced technology HEPA filters having effeciency of 99.97 down to 0.3 micron.610 x 305 x 150 mm.

TERMINAL HEPA MODULE (ISO -6) AREA:-Gel Seal type latest and advanced technology HEPA filters having effeciency of 99.99 down to 0.3 micron.610 x 610 x 150 mm

TERMINAL HEPA MODULE (ISO -6) AREA:-Gel Seal type latest and advanced technology HEPA filters having effeciency of 99.99 down to 0.3 micron.610 x 305 x 150 mm

TERMINAL HEPA MODULE (ISO -6) AREA:-Gel Seal type latest and advanced technology HEPA filters having effeciency of 99.99 down to 0.3 micron.305 x 305 x 150 mm

TERMINAL HEPA MODULE GRADE B AREA :-False Ceiling type HEPA Filter housing with gear operated damper from room side, DOP port, pressure sensing port suitable for fixing gel seal type HEPA Filters of following sizes 610 x 610 x 150 mm

TERMINAL HEPA MODULE GRADE B AREA:-False Ceiling type HEPA Filter housing with gear operated damper from room side, DOP port, pressure sensing port suitable for fixing gel seal type HEPA Filters of following sizes. 610 x 305 x 150 mm

TERMINAL HEPA MODULE GRADE B AREA :-False Ceiling type HEPA Filter housing with gear operated damper from room side, DOP port, pressure sensing port suitable for fixing gel seal type HEPA Filters of following sizes.305 x 305 x 150 mm

TERMINAL HEPA MODULE (ISO -7) AREA:-SS 304 Perforated grill for the following HEPA Filters sizes610 x 610 x 150 mm

TERMINAL HEPA MODULE (ISO -7) AREA:-SS 304 Perforated grill for the following HEPA Filters sizes610 x 305 x 150 mm

TERMINAL HEPA MODULE (ISO -7) AREA:-SS 304 Perforated grill for the following HEPA Filters sizes305 x 305 x 150 mm

TERMINAL HEPA MODULE (ISO -7) AREA :-False Ceiling type HEPA Filter housing with gear operated damper from room side, DOP port, pressure sensing port suitable for fixing gel seal type HEPA Filters of following sizes.Type - 1 : Side connection610 x 610 x 150 mm

TERMINAL HEPA MODULE (ISO -7) AREA :-False Ceiling type HEPA Filter housing with gear operated damper from room side, DOP port, pressure sensing port suitable for fixing gel seal type HEPA Filters of following sizes.Type - 1 : Side connection 610 x 305 x 150 mm

TERMINAL HEPA MODULE (ISO -7) AREA :-False Ceiling type HEPA Filter housing with gear operated damper from room side, DOP port, pressure sensing port suitable for fixing gel seal type HEPA Filters of following sizes.Type - 1 :Side connection 305 x 305 x 150 mm

TERMINAL HEPA MODULE (ISO -7) AREA:-Gel Seal type latest and advanced technology HEPA filters having effeciency of 99.99 down to 0.3 micron.610 x 610 x 150 mm

TERMINAL HEPA MODULE (ISO -7) AREA:-Gel Seal type latest and advanced technology HEPA filters having effeciency of 99.99 down to 0.3 micron.610 x 305 x 150 mm

TERMINAL HEPA MODULE (ISO -7) AREA:-Gel Seal type latest and advanced technology HEPA filters having effeciency of 99.99 down to 0.3 micron.305 x 305 x 150 mm.

Dampers

PVC drain piping with 9 mm nitrial rubber insulation for AHU'S drain25 MM

PVC drain piping with 9 mm nitrial rubber insulation for AHU'S drain40 MM

DAMPERSAL low leakage volume control damper suitable for supply and return ducts

Differential Pressure Gauges

Differential Pressure GaugesDifferentical pressure gauges for rooms with 18G GI powder coated box with 18G SS 304 flush cover, nozzles and tubing. ( Range- 0-10mm wc )

Differential Pressure GaugesDifferential Pressure gauges for AHUs and ventilation across the pre / fine / semi HEPA filter ( Range 0-100mm wc )

Networking

Duct Type Temperature Sensors with all duct mounting accessories.Range: 0 °C to 100 °CSensing element: PT1000Accuracy: +/- 0.3°C

Duct Type Temperature Rh combo Sensors with all duct mounting accessories.Range: 0% to 95%Rh Sensing element: capacitive sensorTemp sensing element: PT1000Accuracy: For Temp:+/- 0.3°C For Rh:+/- 3%

Differential Pressure switch (0-500Pa), across the filter including all the Fixing accessories.

Smoke sensors

Temperature, humidity and pressure display with remote Temp, RH Pressure sensors

Mechanical Work

Galvanized Iron Pipe of light class, with rated pressure as per IS 1289, including all the fittings such as elbows, tees, bends, unions, threaded joints and welded joints wherever requried, for Drain lines.32 mm dia G.I. Pipe (light class)

Galvanized Iron Pipe of light class, with rated pressure as per IS 1289, including all the fittings such as elbows, tees, bends, unions, threaded joints and welded joints wherever requried, for Drain lines.50 mm dia G.I. Pipe (light class)

Galvanized Iron Pipe of light class, with rated pressure as per IS 1289, including all the fittings such as elbows, tees, bends, unions, threaded joints and welded joints wherever requried, for Drain lines. 80 mm dia G.I. Pipe (light class)

Stainless steel of matte finish 304 pipe of schedule 5S or thicker, including all the fittings such as elbows, tees, bends, unions, threaded joints and welded joints wherever requried, for Drain lines. The welded joints has to be buffed/polished to get matte finish.SS 304 pipe 25mm

Stainless steel of matte finish 304 pipe of schedule 5S or thicker, including all the fittings such as elbows, tees, bends, unions, threaded joints and welded joints wherever requried, for Drain lines. The welded joints has to be buffed/polished to get matte finish. SS 304 pipe 40mm

SS 304 pipe support, C Clamp type fastened using screw/ bolts including the supportws on the floor/wall/roof as per requirement. To be fixed inside the clean rooms. All welded joints has to be buffed to matte finish Pipe support 15mm C type clamp

SS 304 pipe support, C Clamp type fastened using screw/ bolts including the supportws on the floor/wall/roof as per requirement. To be fixed inside the clean rooms. All welded joints has to be buffed to matte finish Pipe support 25mm C type clamp

SS 304 pipe support, C Clamp type fastened using screw/ bolts including the supportws on the floor/wall/roof as per requirement. To be fixed inside the clean rooms. All welded joints has to be buffed to matte finish Pipe support 40mm C type clamp

SS 304 pipe support, C Clamp type fastened using screw/ bolts including the supportws on the floor/wall/roof as per requirement. To be fixed inside the clean rooms. All welded joints has to be buffed to matte finish Pipe support 50mm C type clamp

Galvanized Iron Pipe of medium class, with rated pressure as per IS 1289, including all the fittings such as elbows, tees, bends, unions, threaded joints and welded joints wherever requried, for water lines 20 mm dia G.I. Pipe (medium class)

Galvanized Iron Pipe of medium class, with rated pressure as per IS 1289, including all the fittings such as elbows, tees, bends, unions, threaded joints and welded joints wherever requried, for water lines 32 mm dia G.I. Pipe (medium class)

Galvanized Iron Pipe of medium class, with rated pressure as per IS 1289, including all the fittings such as elbows, tees, bends, unions, threaded joints and welded joints wherever requried, for water lines 50 mm dia G.I. Pipe (medium class)

Galvanized Iron Pipe of medium class, with rated pressure as per IS 1289, including all the fittings such as elbows, tees, bends, unions, threaded joints and welded joints wherever requried, for water lines 65 mm dia G.I. Pipe (medium class)

Stainless steel of matte finish 304 pipe of schedule 10S or thicker, including all the fittings such as elbows, tees, bends, unions, threaded joints and welded joints wherever requried, for water supply lines. The welded joints has to be buffed/polished to get matte finish. SS 304 pipe 15mm

Stainless steel of matte finish 304 pipe of schedule 10S or thicker, including all the fittings such as elbows, tees, bends, unions, threaded joints and welded joints wherever requried, for water supply lines. The welded joints has to be buffed/polished to get matte finish. SS 304 pipe 25mm

SS 304 Ball valves, threaded, with pressure rating of 8kg/cm2 with stainless steel handles. 15NB

SS 304 Ball valves, threaded, with pressure rating of 8kg/cm2 with stainless steel handles. 25NB

SS 304 Ball valves, threaded, with pressure rating of 8kg/cm2 with stainless steel handles. 40NB

SS 304 Ball valves, threaded, with pressure rating of 8kg/cm2 with stainless steel handles. 50NB

Galvanized Iron Pipe of heavy class, with rated pressure as per IS 1289, including all the fittings such as elbows, tees, bends, unions, threaded joints and welded joints wherever requried, for compressed air. 15NB

Galvanized Iron Pipe of heavy class, with rated pressure as per IS 1289, including all the fittings such as elbows, tees, bends, unions, threaded joints and welded joints wherever requried, for compressed air. 25NB

Stainless steel of matte finish 304 pipe of schedule 40S or thicker, including all the fittings such as elbows, tees, bends, unions, threaded joints and welded joints wherever requried, for compressed air supply. The welded joints has to be buffed/polished to get matte finish. Working pressure of the lines 8 bar. 15NB

MS supports, with rust proof painted of minimum 3 coats. The support includes, rods, pipes angles and fastners wherever required

Air Compressor - Supply, Installation, Testing, Commissioning and Validation of air compressor minimum of minimum 40 cfm, oil free reciprocating compressor, with operaring pressure of 8 bar and inbuilt air receiver, of at least 100 litres. The compressor should be air cooled, with auto cut off for set pressure, with inbuilt pressure setting option. Make: Atlas Copco. Elgi, Kirloskar equivalent

Electrical Starter Panel

Electrical Starter PanelsAHU (Having VFD) - 'VFD provision' with bypass STAR/DELTA STARTER with Overload, Single phasing, Under voltage and overvoltage, phase reverse protection with necessary internal wiring. Starter should be compatible for BMS also with necessary inputs and outputs provisions, power and control wiring should be carried out as per IS standards suitable for current ranging Ampere set of ON OFF indication lights START- STOP push buttons.(Floor Mounted Panel)

Variable Frequency Drive

VARIABLE FREQUENCY DRIVES (VFD) Supply, Installation, Testing and Commissioning of VFD of suitable rating including accessoreies for the following AHUsAHU -02 5.5 KW

VARIABLE FREQUENCY DRIVES (VFD) Supply, Installation, Testing and Commissioning of VFD of suitable rating including accessoreies for the following AHUsAHU-01- 3.7 kw

Cabling and Terminations

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 X 10 sq. mm (22mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 25 sq. mm (28mm)

Supplying and making outdoor end termination with cast resin compound including aluminium lugs and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 50 sq. mm

Supplying and making outdoor end termination with cast resin compound including aluminium lugs and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 300 sq. mm

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 4 sq mm with factory made clamp

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 6 sq mm with factory made clamp

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 10 sq mm with factory made clamp

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 16 sq mm with factory made clamp

END TERMINALS Aluminium 4C X 6 SQMM AL

CABLE CONDUIT - The following cables including end termination for below listed XLPE insulated armoured cable with copper lugs, brass/PVC cable glands, tapping, crimping,ferruling etc. complete, to be included. 2 Core 1.0 SQ. MM, Armoured ATC conductor multistranded, Shielded cable.

CABLE CONDUIT - The following cables including end termination for below listed XLPE insulated armoured cable with copper lugs, brass/PVC cable glands, tapping, crimping,ferruling etc. complete, to be included.4 Core 1.0 SQ. MM, Armoured ATC conductor multistranded, Shielded cable. (For RH sensor valve control)

CABLE CONDUIT - The following cables including end termination for below listed XLPE insulated armoured cable with copper lugs, brass/PVC cable glands, tapping, crimping,ferruling etc. complete, to be included.6 Core 1.0 SQ. MM, Armoured ATC conductor multistranded, Shielded cable. (For RH sensor valve control)

Junction boxes

GI PERFORATED TYPE CABLE TRAY:-Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts nuts, etc. as required.225 mm width X 50 mm depth X 1.6 mm thickness

GI PERFORATED TYPE CABLE TRAY:-Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts nuts, etc. as required.300 mm width X 50 mm depth X 1.6 mm thickness

GI PERFORATED TYPE CABLE TRAY:-Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts nuts, etc. as required.450 mm width X 50 mm depth X 2.0 mm thickness

GI PERFORATED TYPE CABLE TRAY:-Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts nuts, etc. as required.100 mm width X 50 mm depth X 1.6 mm thickness

END TERMINALS Copper3C X 1.5 SQMM CU

END TERMINALS Copper3C X 2.5 SQMM CU

END TERMINALS Copper4C X 1.5 SQMM CU

END TERMINALS Copper 4C X 2.5 SQMM CU

END TERMINALS Copper 4C X 4 SQMM CU

DOUBLE COMPRESSION GLANDS20 MM

DOUBLE COMPRESSION GLANDS50 MM

DOUBLE COMPRESSION GLANDS25 MM

Double Compression glands32 mm

Supply and drawing the following sizes of multi-core PVC insulated FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.4C X 2.5 SQ.MM CU

Supply and drawing the following sizes of multi-core PVC insulated FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.4 C X 1.5 SQ.MM CU

Supply and drawing the following sizes of multi-core PVC insulated FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.2C X 1.5 SQ.MM CU

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3C X 10 SQMM AL

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps note along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4C X 10 SQMM AL

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4C X 16 SQMM AL

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5C X 50 SQMM AL

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5C X 300 SQMM AL

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3C X 1.5 SQMM CU

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3C X 2.5 SQMM CU

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4C X 1.5 SQMM CU

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4C X 4 SQMM CU

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4C X 2.5 SQMM CU

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4C X 25 SQMM AL

Earthing

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

EARTHINGSupply and drawing 12 SWG CU wire as required

EARTHINGSupply and drawing 10 SWG CU wire as required

Conduit

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm

Wall Panelling Works

Supply and Installation of Double skin Wall panels- 100 mm Thick ( PCGI) 100mm thick double skin wall panels suitable to accommodate return air risers with ducts, of skin thick 0.8mm GPSP (120 GSM Zinc Coated ) Sheet 0n both sides . PUF as infill material Density 40-42 Kg/Cu mtr with both side powder coating of thickness 60-80 microns including Bottom track & silicon sealant etc and with cutout of required dimensions as per site condition, along with perforated Detachable Grill,Volume Control Damper & Prefilter.

Supply and Installation of Double skin Wall panels- 100 mm Thick ( PCGI) 100mm thick double skin modular wall panels of skin thick 0.8mm GPSP (120 GSM Zinc Coated ) Sheet 0n both sides . PUF as infill material Density 40-42 Kg/Cu mtr with both side powder coating of thickness 60-80 microns including Bottom track & silicon sealent etc.

Supply and Installation of Double skin Wall panels- 80 mm Thick ( PCGI) 80mm thick double skin modular wall panels of skin thick 0.8mm GPSP (120 GSM Zinc Coated ) Sheet 0n both sides . PUF as infill material Density 40-42 Kg/Cu mtr with both side powder coating of thickness 60-80 microns including Bottom track & silicon sealent etc.

Supply and Installation of Double skin Wall panels- 80 mm Thick ( PCGI) 80mm thick double skin wall panels suitable to accommodate return air risers with ducts of skin thick 0.8mm GPSP (120 GSM Zinc Coated ) Sheet 0n both sides . PUF as infill material Density 40-42 Kg/Cu mtr with both side powder coating of thickness 60-80 microns including Bottom track & silicon sealent etc. with cutout of required dimensions as per site condition, along with perforated Detachable Grill,Volume Control Damper & Prefilter.

Supply and Installation of Double skin Wall panels- 50 mm Thick ( PCGI) 50mm thick double skin modular wall panels of skin thick 0.8 mm GPSP (120 GSM Zinc Coated ) Sheet 0n both sides . PUF as infill material Density 40-42 Kg/Cu mtr with both side powder coating of thickness 60-80 microns including Bottom track & silicon sealent etc.

Supply and Installation of Double skin Wall panels- 50 mm Thick ( PCGI) 50mm thick double skin wall panels suitable to accommodate return air risers with ducts of skin thick 0.8mm GPSP (120 GSM Zinc Coated ) Sheet 0n both sides . PUF as infill material Density 40-42 Kg/Cu mtr with both side powder coating of thickness 60-80 microns including Bottom track & silicon sealent etc. with cutout of required dimensions as per site condition, along with perforated Detachable Grill,Volume Control Damper & Prefilter.

Supply and Installation of Double skin Wall panels- 80 mm Thick( PCGI/SS ) 80mm thick double skin wall panels of skin thick 0.8mm GPSP (120GSM Zinc Coated ) Sheet one side and other side SS304 , 0.6mm Thick Matt Finish. PUF as infill material Density 40-42 Kg/Cu mtr with powder coating of thickness 60-80 microns.

Supply and Installation of Double skin Wall panels- 50 mm Thick ( PCGI/SS ) 50mm thick double skin wall panels of skin thick 0.8mm GPSP (120GSM Zinc Coated ) Sheet one side and other side SS304 , 0.6mm Thick Matt Finish. PUF as infill material Density 40-42 Kg/Cu mtr with powder coating of thickness 60-70 microns inclusive of truss up to 3m

Providing and Fixing of Ceiling Panels Walkable / Non Walkable 50mm Thick 50mm thick double skin modular walkable Clean Room False ceiling panels for skin thick 0.8mm. PUF as infill material Density 40-42 Kg/Cu mtr with both side powder coating of thickness 60-80 microns inclusive of truss

Supply and installation of Aluminum Covings (Suitable to above wall panels) of Grade 6060 in Floor to wall, Wall to Wall, Wall to Ceiling joints including 2D, 3D Corner Pieces complete.

Supply and installation of Aluminum Edge Guard (Suitable to above wall panels) of Grade 6060 including 2D, 3D Corner Pieces complete.

Extra for providing opening or required size & shape cutouts in False Ceiling and Wall panels at walls and ceiling, including rubbing, grinding and polishing of cut edges etc. complete.

Supplying and Fixing of GMP Panel Doors- 100 mm Panels 700 X 2100 MM with view Panel 300 X 900 GI PU Painted Panel mounted GMP Doors with frame 100 mm thick with Shutter & Frame with drop seal and accessories including lock & key with SS304 hinges

Supply and fixing of GMP Panel Doors- 100 mm Panels 850 X 2100 MM with view Panel 300 X 900 GI PU Painted Panel mounted GMP Doors with frame 100 mm thick with Shutter & Frame with drop seal and accessories including lock&key with SS304 hinges

Supply and Fixing of 80 mm thick Panel mounted doors (Shutter + Frame )- 700 X 2100 MM with view Panel 300 X 900 GI PU Painted Panel mounted GMP Doors with frame 80 mm thick with Shutter & Frame with drop seal and accessories including lock & key with SS304 hinges

Supply and Fixing of 80 mm thick Panel mounted doors (Shutter + Frame )- 850 X 2100 MM with view Panel 300 X 900 GI PU Painted Panel mounted GMP Doors with frame 80 mm thick with Shutter & Frame with drop seal and accessories including lock & key with SS304 hinges

Supply and Fixing of 80 mm thick Panel mounted doors (Shutter + Frame )- 1000 X 2100 MM with view Panel 500 X 900 GI PU Painted Panel mounted GMP Doors with frame 80 mm thick with Shutter & Frame with drop seal and accessories including lock&key with SS304 hinges

Supply and Fixing of 80 mm thick Panel mounted doors (Shutter + Frame )- (1000 + 600) X 2100 MM with view Panel 500 X 900 GI PU Painted Panel mounted GMP Doors with frame 80 mm thick with Shutter & Frame with drop seal and accessories including lock & key with SS304 hinges

Supply and Fixing of 80 mm thick Panel mounted doors (Shutter + Frame )- 700 X 2100 MM GI PU Painted Panel mounted GMP Doors with frame 80 mm thick with Shutter & Frame with drop seal and accessories including lock & key with SS304 hinges

Supply and Fixing of 80 mm thick Panel mounted doors (Shutter + Frame )- 850 X 2100 MM GI PU Painted Panel mounted GMP Doors with frame 80 mm thick with Shutter & Frame with drop seal and accessories including lock & key with SS304 hinges

Supply and fixing of 50 mm Panel doors- 700 X 2100 MM with view Panel 300 X 900 GI PU Painted Panel mounted GMP Doors with frame 50 mm thick with Shutter & Frame with drop seal and accessories including lock&key with SS304 hinges

Supply and fixing of 50 mm Panel doors- 850 X 2100 MM with view Panel 300 X 900 GI PU Painted Panel mounted GMP Doors with frame 50 mm thick with Shutter & Frame with drop seal and accessories including lock & key with SS304 hinges

Supply and fixing of 50 mm Panel doors- 1000 X 2100 MM with view Panel 500 X 900 GI PU Painted Panel mounted GMP Doors with frame 50 mm thick with Shutter & Frame with drop seal and accessories including lock & key with SS304 hinges

Supply and fixing of 50 mm Panel doors- 1300 X 2100 MM with view Panel 300 X 900 GI PU Painted Panel mounted GMP Doors with frame 50 mm thick with Shutter & Frame with drop seal and accessories including lock&key with SS304 hinges

Supply and fixing of 50 mm Panel doors- (1000 + 600) X 2100 MM with view Panel 500 X 900 GI PU Painted Panel mounted GMP Doors with frame 50 mm thick with Shutter & Frame with drop seal and accessories including lock&key with SS304 hinges

Supply and fixing of 50 mm Panel doors- 700 X 2100 MM GI PU Painted Panel mounted GMP Doors with frame 50 mm thick with Shutter & Frame with drop seal and accessories including lock&key with SS304 hinges

Supply and fixing of 50 mm Panel doors- 850 X 2100 MM GI PU Painted Panel mounted GMP Doors with frame 50 mm thick with Shutter & Frame with drop seal and accessories including lock & key with SS304 hinges

Supply and fixing of Emergency Door- wall mounted 1100 X 2100 MM with panic bar and kick plate Red

Supply and fixing of Non GMP door- Wall mounted non GMP door single leaf 700 X 2100 MM GI PU Painted including lock & key with SS304 hinges

Supply and fixing of Non GMP door- Wall mounted non GMP door single leaf 1000 X 2100 MM GI PU Painted including lock & key with SS304 hinges

Supply and fixing of Non GMP door- Wall mounted non GMP door double leaf 1300 X 2100 MM GI PU Painted including lock & key with SS304 hinges

Supply and fixing of Door seal for GMP door

Supply and installation of SS Kick plate 0.8mm for doors

Supply and Installation of Galvanized Iron Powder Coated Fixed window made out of 1.2mm thick GI sheet, powder coated with pure polyester powder including fixing of double paned 5mm thick toughened glass on the both sides and silica gel strip for moisture absorption including sealing and fixing arrangement. The glasses will be vacuum sealed and fitted in factory. Frame Width of 50mm.

Supply and Installation of Galvanized Iron Powder Coated Fixed window made out of 1.2mm thick GI sheet, powder coated with pure polyester powder including fixing of double paned 5mm thick toughened glass on the both sides and silica gel strip for moisture absorption including sealing and fixing arrangement. The glasses will be vacuum sealed and fitted in factory. Frame Width of 80mm.

Supply and Installation of Galvanized Iron Powder Coated Fixed window made out of 1.2mm thick GI sheet, powder coated with pure polyester powder including fixing of double paned 5mm thick toughened glass on the both sides and silica gel strip for moisture absorption including sealing and fixing arrangement. The glasses will be vacuum sealed and fitted in factory. Frame Width of 100mm.

Supply, Installation, Testing and Commissioning of 2 door interlocking system programmable as per site conditions.

Supply, Installation, Testing and Commissioning of 3 door interlocking system programmable as per site conditions with minimum one control with Biometric access

Supply, Installation, Testing and Commissioning of4 door interlocking system programmable as per site conditions with minimum two control with Biometric access

Supply and Fixing of Covering channel 15 mm thick for cutouts with required fittings and accessories.

Supply and Fixing of Covering channel 0.8 mm thick GPSP GI sheet with required fittings and accessories.

Epoxy Flooring

Epoxy Flooring : Concrete floor should be at least 28 days old or have amoisture content of less than 5% before proceeding withepoxy primer application. Laitance and deposits on newconcrete floors are preferably removed by light grit/ shotblasting, mechanical scarifying or grinding to achieve an opentextured surface. Followed by application of solvent freeepoxy primer followed by application ofself-levelling screed of thickness 2000microns, followed by application of self leveling Epoxytopcoat of thickness 1000 microns.compressive strength 72 Mpa(ASTM - C 579)Flexural strength 32 Mpa ( ASTM C 580)Tensile strength 18 MPa (ASTM C 307)Rate is inclusive of surface preparation, primer, screed andtop coat and any other repairs.(Inculding coving). Make: Fosroc/ Dr. Beck/ Flamaflor/ BASF/Dr.Cipy/Sika

Steel Structure

STEEL STRUCTUREMS Supports for AHU s and Condensing units ,with chequrred plate and ISMB beems(APPROX.)

STEEL STRUCTUREI-BEAM/C-CHANNEL/ANGLES for ducting , false ceiling supports in void area SERVICE FLOOR(APPROX)

Pass Box

Supply and Installation of Pass Boxes made out of Stainless Steel SS 304 Static pass boxes with UV and interlocking arrangement in knockdown condition to be assembled at site wall mounted having dimension ID 600x600x600 (LxDxH) OD 650x650 x 700 (LxDxH) Two way Pass box

Supply and Installation of Pass Boxes made out of Stainless Steel SS 304 Static pass boxes with UV and interlocking arrangement in knockdown condition to be assembled at site wall mounted having dimension ID 300x450x300 (LxDxH) OD 400x500 x 400 (LxDxH) Two Way Pass box

Supply and Installation of Pass Boxes made out of Stainless Steel SS 304 Dynamic pass boxes with UV and interlocking arrangement in knockdown condition to be assembled at site wall mounted having dimension ID 600x600x600 (LxDxH) OD 720x720 x 900 (LxDxH) Two way pass box

Supply and Installation of Pass Boxes made out of Stainless Steel SS 304 Dynamic pass boxes with UV and interlocking arrangement in knockdown condition to be assembled at site wall mounted having dimension ID 300x450x300 (LxDxH), OD 400x500 x 600 (LxDxH) Two Way Pass Box

Air Conditioners

Supply, Installation, testing and commissioning of 3 x 3 Cassette type Air Conditioner of following capacity and specifications: Consisting of ceiling-mounted type room unit (fan coil) with cordless remote control and one number outdoor condensing unit comprising of energy-efficient suitable rotary compressor for operation on single-phase, 230 V, 50Hz supply, fixing the outdoor unit on a raised platform as per manufacturers recommendation, with R-32/R-410A or equivalent refrigerant and fixing of room (fan coil) unit on ceiling, standard 5 m distance refrigerant copper piping with 13mm nitrile rubber insulation, providing and making interconnection between room & condenser as per site conditions, comprising of 1; dia drain PVC pipe with insulation up to 5 m, canvas connections, full electrical cabling from power plug near indoor unit and to outdoor unit, ODU MS stand, first charge refrigerant gas, suitable stabilizer etc complete as required. (Make: Voltas, Blue Star, Daikin, Hitachi, Carrier or equivalent). Minimum 1.5 TR 3 Star rated (inverter type AC) as per BEE

Supplying additional copper piping of required size and connecting the same to the available piping and extension of the same through PVC duct inside false ceiling

Supply, Installation, testing and commissioning of 3 x 3 Cassette type Air Conditioner of following capacity and specifications: Consisting of ceiling-mounted type room unit (fan coil) with cordless remote control and one number outdoor condensing unit comprising of energy-efficient suitable rotary compressor for operation on single-phase, 230 V, 50Hz supply, fixing the outdoor unit on a raised platform as per manufacturers recommendation, with R-32/R-410A or equivalent refrigerant and fixing of room (fan coil) unit on ceiling, standard 5 m distance refrigerant copper piping with 13mm nitrile rubber insulation, providing and making interconnection between room & condenser as per site conditions, comprising of 1; dia drain PVC pipe with insulation up to 5 m, canvas connections, full electrical cabling from power plug near indoor unit and to outdoor unit, ODU MS stand, first charge refrigerant gas, suitable stabilizer etc complete as required. (Make: Voltas, Blue Star, Daikin, Hitachi, Carrier or equivalent). Minimum 3 TR 3 Star rated (inverter type AC) as per BEE

Supply, Installation, testing and commissioning of 3 x 3 Cassette type Air Conditioner of following capacity and specifications: Consisting of ceiling-mounted type room unit (fan coil) with cordless remote control and one number outdoor condensing unit comprising of energy-efficient suitable rotary compressor for operation on single-phase, 230 V, 50Hz supply, fixing the outdoor unit on a raised platform as per manufacturers recommendation, with R-32/R-410A or equivalent refrigerant and fixing of room (fan coil) unit on ceiling, standard 5 m distance refrigerant copper piping with 13mm nitrile rubber insulation, providing and making interconnection between room & condenser as per site conditions, comprising of 1; dia drain PVC pipe with insulation up to 5 m, canvas connections, full electrical cabling from power plug near indoor unit and to outdoor unit, ODU MS stand, first charge refrigerant gas, suitable stabilizer etc complete as required. (Make: Voltas, Blue Star, Daikin, Hitachi, Carrier or equivalent). Minimum 2 TR 3 Star rated (inverter type AC) as per BEE

Supply, Installation, testing and commissioning of 3 x 3 Cassette type Air Conditioner of following capacity and specifications: Consisting of ceiling-mounted type room unit (fan coil) with cordless remote control and one number outdoor condensing unit comprising of energy-efficient suitable rotary compressor for operation on single-phase, 230 V, 50Hz supply, fixing the outdoor unit on a raised platform as per manufacturers recommendation, with R-32/R-410A or equivalent refrigerant and fixing of room (fan coil) unit on ceiling, standard 5 m distance refrigerant copper piping with 13mm nitrile rubber insulation, providing and making interconnection between room & condenser as per site conditions, comprising of 1; dia drain PVC pipe with insulation up to 5 m, canvas connections, full electrical cabling from power plug near indoor unit and to outdoor unit, ODU MS stand, first charge refrigerant gas, suitable stabilizer etc complete as required. (Make: Voltas, Blue Star, Daikin, Hitachi, Carrier or equivalent). Minimum 1 TR 3 Star rated (inverter type AC) as per BEE

GMP TECHNICAL SOLUTIONS PVT LTD