REPAIRS AND MAINTENANCE OF FURNITURE UNDER AGE I CG VIZAG

Amount

M&L for removal of existing broken/unserviceable front leg of chair dining, replacing the same with new front leg 1st class hard wood (Teak) of size & dimension of the parts shall be of the same pattern/size as shown in drawing as well as specification and apply two coats of french polish to all replaced parts to match with existing all as specified and directed by Engineer-in-Charge. FD-279

All as per Item No. 1 here-in-above but replacing the rear leg of Chair Dining FD-279

All as per Item No. 1 here-in-above but replacing the back rest of Chair Dining FD-279

All as per Item No. 1 here-in-above but replacing the front/side/back rail of Chair Dining FD-279

All as per Item No. 1 here-in-above but replacing the stiffner of Chair Dining FD-279

M&L for removal of existing broken / unserviceable front /back/ side rail of Chair dining cushioned, replacing the same with new teak wood front/back/side rail. Size & dimension of the parts shall be of the same pattern/size as shown in drawing as well as in specification, fixed to main frame and legs of chair dining cushioned (Drg No FD/MAP-II/04), apply two coats of french polich to all replaced parts to match with existing all as specified and directed by Engineer-in-Charge.

All as per Item No. 6 here-in-above but replacing the front leg of chair dinning cushioned (Drg No FD/MAP-II/04)

All as per Item No. 6 here-in-above but replacing the back stiffner of chair dinning cushioned (Drg No FD/MAP-II/04)

M&L for removal of old unserviceable seat of chair dining cushioned and fix new cushion of 75mm thick, 32 density foam seat, covered with fabric of approved colour fixed to 12mm thick commercial plywood seat of Chair Dining cushioned (Drg No FD/MAP-II/04), complete all as specified and directed by Engineer-in-Charge.

M&L for removal of existing broken/unserviceable front leg of Chair writing (FD-280) replacing the same with new front leg 1st class hard wood (Teak) of size & dimension of the parts shall be of the same pattern/size as shown in drawing as well as specification and apply two coats of french polich to all replaced parts to match with existing all as specified and directed by Engineer-in-Charge.

All as per item No. 10 here-in-above but replacing rear leg of chair writing FD-280

All as per item No. 10 here-in-above but replacing back rest of chair writing FD-280

All as per item No. 10 here-in-above but replacing arm rest of chair writing FD-280

All as per item No. 10 here-in-above but replacing bottom stiffner of chair writing FD-280

All as per item No. 10 here-in-above but replacing front / back/side rail of chair writing FD-280

M&L for removal of existing broken/unserviceable front leg of Chair easy (FD-229) replacing the same with new front leg 1st class hard wood (Teak) of size & dimension of the parts shall be of the same pattern/size as shown in drawing as well as specification and apply two coats of french polich to all replaced parts to match with existing all as specified and directed by Engineer-in-Charge.

All as per item No. 16 here-in-above but replacing arm rest of Chair easy FD-229

All as per item No. 16 here-in-above but replacing front/rear/back rail of Chair easy FD-229

All as per item No. 16 here-in-above but replacing top / bottom/side rail of back rest frame of Chair easy FD-229

M&L for removal of existing damaged top of Peg table and replacing the same with new top 18mm thick prelaminated particle board 450 x 300 mm size with one side decorative teak finish including 18mm wide, 4 mm thick teak wood edging on all sides incl french polishing teak wood edging and as shown in drg and as specified. (FD-277)

M&L for removal of existing damaged any one leg of Peg table and replacing the same with new leg in 1st class hard wood (Teak). Size & dimension of the parts shall be of the same pattern/size as shown in drawing as well as specification and apply two coats of french polich to all replaced parts to match with existing all as specified and directed by Engineer-in-Charge FD - 277

All as per item No. 20 here-in-above but replacing long rail of Peg Table (FD - 277)

All as per item No. 20 here-in-above but replacing short rail of Peg Table (FD - 277)

M&L for removal of existing damaged top of Table bedside and replacing the same with new top 18mm thick prelaminated particle board 450 x 230 mm size with one side decorative teak finish including 18mm wide, 4 mm thick teak wood edging on all sides incl french polishing teak wood edging and as shown in drg and as specified. (FD-276)

M&L for removal of existing damaged any one of the two sides of Table bed side and replacing the same with new side using 18mm prelaminated particle board of size 230 x 510 mm with teak facing on one side and 4mm teak wood/PVC beading on the front edge including french polishing on wooden parts and fixed all as shown on drg and as specified. FD-276

M&L for removal of existing damaged back ply of Table bed side and replacing the same with new 6 mm thick commercial ply of size 450 x 510 mm including french polishing on wooden parts and fixed all as shown on drg and as specified. FD-276

M & L for removing unserviceable and broken plastic cane and cleaning entire surface of the Chair Easy (FD-229) and recanning with new plastic cane of size 1.8x0.46mm and boarder with 3.0x0.60mm size cane as per Godrej Pattern complete all as specified and directed by Engineer-in-Charge.

All as per Sl item No.27 here-in-above, but for Chair Easy back only. FD-229

All as per Sl item No. 27 here-in-above, but for Chair writing. FD-280

M&L for removing unserviceable handle of Almirah steel medium / Almirah lagre steel replacing with Brass chromium plated handle, 100 mm long, as per Godrej Pattern. (FD-1031/1032) (Note:- The repair work shall be carried out at various units / BSO yard as per the directions of Engr in charge. Rate shall be inclusive of all subsequent expenditure incurred for carrying out repair work at various units)

M&L for One side leg of Almirah steel medium / Almirah lagre steel (FD-1031/1032), left or right, 70 mm wide and 100 mm high, open ends bent outwards upto 15 mm, MS sheet of 1.6 mm thick, welding the channel to bottom of almirah at 50 mm from the side of almirah including 2 coats of synthetic enamel paint olive green/smoke grey colour.

M&L for 3 way locking device as per Godrej pattern, fully operational with the existing handle. (FD-1031/1032)

M&L Steel cup board lock, 50 mm size, 6 lever with stainless steel keys in duplicate as per Godrej pattern. (FD-1031/1032)

M & L preparation of old treated steel surfaces of Almirah large with shelves as per drawing No FD-1031 and applying a coat of synthetic enamel paint smoke grey / olive green colour complete all as specified.

M & L preparation of old treated steel surfaces of Almirah medium with shelves as per drawing No FD-1032 and applying a coat of synthetic enamel paint smoke grey / olive green colour complete all as specified.

M & L preparation of old treated steel surfaces of Almirah large, half shelf and half hang, as per drawing No FD-FD/E6/MAP/18 and applying a coat of synthetic enamel paint smoke grey / olive green colour complete all as specified.

M&L for replacing old broken left or right side frame including the side front /rear leg portions and the top handle portion of Chair Verandah, with new 20 mm dia 16 G steel conduit pipe of 1 mtr each shall be measured, duly welded to the seat frame and also to the 10mm dia MS rod in front. Replaced conduit frame to be given 2 coats of synthetic enemel paint (white colour) over a coat of red oxide zinc chromate primer complete to match with existing color. FD - 256

M & L for Canning chair verandah with new plastic cane of size 3.0x0.60mm cane including taking out old/damaged plastic cane from chair verandah and cleaning the entire surface complete all as specified and directed by Engineer-in-Charge.

M & L preparation of old treated steel surfaces of Chair Varandah as per drawing No FD-256 and applying a coat of synthetic enamel white paint complete all as specified.

Removal of existing damaged top of teapoy verandah and replacing the same with new top made out of 900 x 450 mm size, 18mm thick pre laminated particle board (White finish on top) with first class teak wood edging 3mm thick all sides duly fixed to the conduit frame with screws from below the conduit including french polishing TW edging complete all as shown in drg and as specified. (FD/E6/MAP/17)

M & L preparation of old treated steel surfaces of Teapoy Varandah as per drawing No. FD/E6/MAP/17 and applying a coat of synthetic enamel paint complete all as specified.

M & L 18mm thick Prelaminated particle board, laminated one side with decorative choice lamination & other side balancing white lamination to match with existing colour & texture as in side/front/back/drawer of Table bedside with PVC edging (Drg No FD/MAP/15(R)), including taking out old unserviceable board complete all as specified and directed by Engineer-in-Charge.

S & F 50mm long, brass, chromium plated, handle suitable for Table bed side complete all as specified.

M & L preparation of old treated steel surfaces of Table Bed side steel (MAP) and applying a coat of synthetic enamel paint complete all as specified.

M&L for removing old unserviceable upholstered portion of Sofa set 5 seater cushioned(two with arms & three without arms) by removing old torned out foam cushion, tapestry cloth, hessain cloth,coir fibre, springs etc and repairing plywood base wherever necessary and fixing with new cotton cord, coir fibres, foam cushion 32 density 100 mm thick, hessain cloth, made to shape with 25 mm foam cushion and covered with new tapestry cloth costing not less than Rs. 240/- per mtr and all specified and directed by Engr - in - charge (FD - 234)

M&L for removing old unserviceable upholstered portion of Sofa set 4 seater cushioned (two with arms & two without arms) by removing old torned out foam cushion, tapestry cloth, hessain cloth,coir fibre, springs etc and repairing plywood base wherever necessary and fixing with new cotton cord, coir fibres, foam cushion 32 density 100 mm thick, hessain cloth, made to shape with 25 mm foam cushion and covered with new tapestry cloth costing not less than Rs. 240/- per mtr and all specified and directed by Engr - in - charge (FD - 234)

M&L for supply of new cushions for Sofa set 5 seater (set consisting of 10 cushions) of size 560x530x100 mm thick 40 dencity of make sleepwell or equivalent as approved by GE and duly covered with tapestry cloth costing not less than Rs. 240/- per mtr over a cover of ling cloth complete all as specified and directed. (FD - 281)

M&L for supply of new cushions for Sofa set 4 seater (set consisting of 8 cushions) of size 560x530x100 mm thick 40 dencity of make sleepwell or equivalent as approved by GE and duly covered with tapestry cloth costing not less than Rs. 240/- per mtr over a cover of ling cloth complete all as specified and directed. (FD - 281)

M & L cushion cover with tapestry cloth costing not less than Rs 250 per meter of approved colour / shade / texture suitable for 560 x 530 x 100mm size foam cushion seat/back, stiched three sides and provide best quality zip on one side for opening and closing suitable for Sofa chair as per drawing FD-281 complete all as specified and directed.

M & L preparation of old treated steel surfaces of Book case as per drawing No FD-1028 and applying a coat of synthetic enamel paint complete all as specified.

S&F table top with 18 mm thick pre laminated particle board of size 1200 x 600 mm with teak veneer facing on one side and balancing white lamination on the other side, including 4 mm thick teak wood edging alround the top and fixing the table top on top frame of Table office clerk steel (FD-84) with screws from bottom including taking down old table top complete. (Note:- All furniture repairs shall be carried out at BSO yard / various units as per direction of Engr in charge. Rates are inclusive of all subsequent expenditure occured on carrying out repair at various sites)

All as per Sl item No. 51 here-in-above, but new top of size 1800x1200 mm for Table office officer steel FD-84(M)

All as per Sl item No.51 here-in-above, but new top of size 1800x900 mm for Table dining 8 persons (FD-273)

All as per Sl item No.51 here-in-above, but new top of size 1500x900 mm for Table dining 6 persons (FD-273)

All as per Sl item No.51 here-in-above, but new top of size 1200x900 mm for Table dining (FD/MAP-II/03)

All as per Sl item No.51 here-in-above but replacing table top of size 1145 x 600 mm for Table writing FD-275

All as per Sl item No.51 here-in-above but new top of size 900 x 450 mm for Table centre. FD-274

All as per Sl item No.51 here-in-above, but new top of size 600 x 450 mm for Teapoy. FD-278

S&F lock for table drawer of Table office clerk steel FD - 84(M), MS lock, 4 lever with stainless steel duplicate keys, duly fixed to the top drawer and providing automatic locking system to other three drawers including taking down of old lock complete.

All as per Sl item No.59 here-in-above, but lock for Table office officer steel FD-84(M)

S&F new 1 mm MS channel runner of 400 mm long folded to make shape duly welded one side to table frame to run the drawers smoothly including taking down old broken channel and make functional all drawers of table office clerk steel FD - 84(M) complete.

All as per Sl item No.61 here-in-above, but MS channel runner for Table office officer steel FD-84(M)

M&L for removal of existing foggy/broken mirror of Table dressing gents and replacing the same with new mirror not less than 5.0 mm thick and of size 380 x 760 mm and fixing on the existing frame all as shown on drg and as specified. FD -230

M&L for removal of old broken plywood back of mirror of Table dressing gents and replacing the same with new 6 mm plywood fixing to the existing frame alongwith 35x25 mm wooden beading alround all as shown on drg and as specified. FD -230

M&L for removal of existing foggy/broken mirror of Table dressing Ladies and replacing the same with new mirror not less than 5.0 mm thick and of size 366 x 1220 mm and fixing on the existing frame all as shown on drg and as specified. FD - 378

M&L for removal of old broken plywood back of mirror of Table dressing Ladies and replacing the same with new 6 mm plywood fixing to the existing frame alongwith 35x25 mm wooden beading alround all as shown on drg and as specified. FD -378

M&L for removal of existing foggy/broken mirror of Table dressing Ladies and replacing the same with new mirror not less than 5.0 mm thick and of size 430 x 1230 mm and fixing on the existing frame all as shown on drg and as specified. FD/E6/MAP II/07

M&L for removal of old broken plywood back of mirror of Table dressing Ladies and replacing the same with new 6 mm plywood fixing to the existing frame alongwith 25x20 mm wooden beading alround all as shown on drg and as specified. FD/E6/MAP II/07

M&L for removal of seat cushion of Table dressing Ladies with mirror FD/E6/MAP II/07 and supply new foam cushion 75 mm thick having 32 dencity duly stitched with tapestry cloth not less than 240/- per meter over 12 mm thick commercial plywood seat base all as shown in drg and as specified (FD/E6/MAP II/07)

M&L for removal of existing foggy/broken mirror of Hat stand with mirror and replacing the same with new mirror of size 300x440 mm and not less than 5.0 mm thick fixing on the existing frame all as shown on drg and as specified. (FD-233)

M&L for removal of old broken plywood back of Hat stand with miror and replacing the same with new 6 mm plywood fixing to the existing frame alongwith 25x20 mm wooden beading alround all as shown on drg and as specified. FD-233

M&L for removing broken aluminium peg hooks and new anodised aluminium peg hooks 75 mm long fixed to the Hat stand with mirror (FD-233) all as specified and as directed

M&L for removing existing broken / unserviceable leg of Teapoy FD -278, replacing the same with new leg Ist class hardwood (Teakwood) of size & dimention of the parts shall be of the same pattern / size as shown in drawing as well as specified and apply two coats of french polish to all replaced parts to ,match with exisitng all as specfied and directed by Engr - in - charge

All as per Sl item No. 73 here-in-above, but replacing long rail of Teapoy. FD-278

All as per Sl item No. 73 here-in-above, but replacing short rail of Teapoy. FD-278

M&L for removing existing broken / unserviceable leg of Table centre (FD-274) replacing the same with new leg Ist class hardwood (Teakwood) of size & dimention of the parts shall be of the same pattern / size as shown in drawing and apply two coats of french polish to all replaced parts to match with exisitng all as specfied and directed by Engr - in - charge

All as per Sl item No.76 here-in-above but replacing long rail of Table centre. FD-274

All as per Sl item No. 76 here-in-above but replacing short rail of Table centre. FD-274

M&L for removing existing broken / unserviceable leg of Table writing FD-275 replacing the same with new leg Ist class hardwood (Teakwood) of size & dimention of the parts shall be of the same pattern / size as shown in drawing and apply two coats of french polish to all replaced parts to match with exisitng all as specfied and directed by Engr - in - charge

All as per Sl item No. 79 here-in-above, but replacing long rail of Table writing. FD-275

All as per Sl item No. 79 here-in-above, but replacing short rail of Table writing. FD-275

M&L for removal of existing damaged shutter of the table shelf of Table writing and replacing with new shutter 18mm thick one side teak veneered with 4mm thick teak wood beading alround fixed to the side with Piano hinges of MS and the shutter provided with a recessed handle 50 x 38 mm and also cupboard lock with duplicate keys including french polishing teak veneered surface and TW beading and fixed complete all as shown in drg and as specified. FD-275

M&L for removal of existing damaged drawer of Table writing complete and replacing with new drawer of 18 mm prelaminated particle board and back plank base shall be 6mm thick commercial plywood and the drawer to be provided with a new recessed type handle 50 x 38 mm embedded in the drawer face, exposed portion duly french polished all as shown in drg and as specified. FD-275

M&L for removing old broken wooden seat of Chair CB without arms and replacing with new II class hardwood seat of size 420x380 mm duly canned with godrej pattern and black painted fixed with MS screws to frame of Chair CB without arms (FD-75(M) all as specified and directed.

M&L for removing old broken wooden back of Chair CB without arms and replacing with new II class hardwood back of size 360x380 mm duly canned with godrej pattern and black painted fixed with MS screws to frame of Chair CB without arms (FD-75(M) all as specified and directed.

M & L preparation of old treated steel surfaces of Chair CB without arms as per drawing No FD-75(M) and applying a coat of synthetic enamel paint complete all as specified.

M&L for removing broken / unserviceable table top of Table Computer (FD/MAP/E6/03) and replacing with 18 mm particle board exterior grade/MDF Board matching to exisiting colour & texture including 4 mm thick teakwood edging alround incl french polishing on teakwood edging and as shown in drg & as specified.

M&L for removing broken / unserviceable keyboard tray of Table Computer (FD/MAP/E6/03 ) and replacing with 18 mm particle board exterior grade/MDF board matching to exisiting colour & texture including PVC edging alround and as shown in drg & as specified.

M&L for removing broken / unserviceable shelves of Table Computer (FD/MAP/E6/03 and replacing with 18 mm particle board/MDF board exterior grade / MDF board matching to exisiting colour & texture including PVC edging alround and as shown in drg & as specified.

M&L for removing broken / unserviceable telescopic roller channel of Table Computer (FD/MAP/E6/03 and replacing with SS telescopic roller channel fixed to side wall and as shown in drg & as specified.

M&L for removing broken / unserviceable metal bush screw type of Table Computer (FD/MAP/E6/03 ) and replacing with new metal bush srew type fixed to frame and as shown in drg & as specified.

M&L for removing broken / unserviceable table top of Trolley for TV (FD/MAP/E6/04) and replacing with 18 mm particle board exterior grade/MDF board matching to exisiting colour & texture including PVC edging alround and as shown in drg & as specified.

M&L for removing broken / unserviceable table bottom of Trolley for TV (FD/MAP/E6/04) and replacing with 18 mm particle board exterior grade/MDF board matching to exisiting colour & texture including PVC edging alround and provision of fixing caster wheel and as shown in drg & as specified.

M&L for removing broken / unserviceable any one side of Trolley for TV (FD/MAP/E6/04) and replacing with 18 mm particle board exterior grade/MDF board matching to exisiting colour & texture including PVC edging on exposed sides and as shown in drg & as specified.

M&L for removing broken / unserviceable caster wheel of Trolley for TV (FD/MAP/E6/04) and replacing with new caster wheel fixed to frame and as shown in drg & as specified.

M&L Fixing new Table dressing Gents/ Hat stand with mirror on the wall at various locations with suitable MS screws over a wooden / PVC plug as per directions of Engr in charge (FD-233 & FD-230)

M & L preparation of old treated steel surfaces of Table Office Clerk steel as per drawing No FD-84(M) and applying a coat of synthetic enamel paint smoke grey / olive green colour complete all as specified.

M & L preparation of old treated steel surfaces of Table Office officer steel as per drawing No FD-83(M) and applying a coat of synthetic enamel paint smoke grey / olive green colour complete all as specified.

BED HARD WITH PLYTOP (FD-246) - M&L for removing the old unserviceable/ broken leg from bed hard with plywood top and S&F new leg made out of 1st class teak wood and made to shape all as shown on drg and as directed by Engr-in-Charge (FD-246)

M & L for removing unserviceable/broken plywood from both side of head board of Bed plywood top and S & F new 4mm thick one side teak face plywood (Natural teak) to both side of head board including 6mm thick teak wood beading provided alround the head board and all as specified in drg and directed by Engr-in-Charge (FD-246)

All as per Sl item No. 99 here-in-above, but replacing foot board of Bed hard with plytop (FD - 246)

M & L for removing unserviceable long rail from Bed plywood top and S & F new long rail made out of 1st class teak wood and made to shape and all as specified in drg and directed by Engr-in-Charge (FD-246)

M & L for removing unserviceable short rail from Bed plywood top and S & F new short rail made out of 1st class teak wood and made to shape and all as specified in drg and directed by Engr-in-Charge (FD-246)

M & L for removing unserviceable centre supporitng stiffner from Bed plywood top and S & F new centre supporting stiffner made out of 1st class teak wood and made to shape and all as specified in drg and directed by Engr-in-Charge (FD-246)

M&L for removing unserviceable / wornout existing plywood from Bed plywood top and S & F new 12mm thick ply wood top BWR grade confirming to IS:303 of size 1950 x 900mm of approved make and fixing by SS screws and all as specified in drg and directed by Engr-in-Charge. (FD-246) (Make: Kitply/Century/Everest/ Anchor)

S & F triangular shape corner bracket size 70mm X 70mm long and 15mm thick made out of 1st class teak wood to be fixed to legs to long rail of Bed plywood and all as specified in drg and directed by Engr -in- Charge. (FD-246)

BED HARD WITH PLYTOP (FD/MAP/E6/08(R) - M & L 18mm thick Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination of size 630x185mm, screwed to MS strip, arc welded to 18mm size rectangular pipe as in head board of Bed hard with plytop (Drg No FD/MAP/08(R)) including taking out old unserviceable head board complete all as specified and directed by Engineer-in-Charge.

M & L 18mm thick Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination of size 630x310mm,, screwed to MS strip, arc welded to 18mm size rectangular pipe as in foot board of bed hard (Drg No FD/MAP/08(R)) including taking out old unserviceable foot board complete all as specified and directed by Engineer-in-Charge.

M & L 45x20x5mm size MS flat iron for fixing head/foot board, arc welded to rectangular pipe of bed hard,(Drg No FD/MAP/08(R)) apply two coats of synthetic enamel paint over a coat of red oxide primer to MS flat after welding including taking out old unserviceable MS strip of any size complete all as specified and directed by Engineer-in-Charge.

M & L 25x25x1.25mm thick MS square tube, 850mm long, as in stiffner of bed hard, welded to long rail (Drg No FD/MAP/08(R)), apply two coats of synthetic enamel paint over a coat of red oxide primer to MS pipe after welding including taking out old unserviceable MS pipe of any size complete all as specified and directed by Engineer-in-Charge.

M & L 12mm thick ply wood top BWR grade confirming to IS:303 as in bed hard (Drg No FD/MAP/08(R)),screwed to stiffner including taking out old unserviceable plywood complete all as specified and directed by Engineer-in-Charge. (Make: Kitply/ Century/Everest/Anchor)

S & F rubber shoes suitable for 38x38mm MS square tube as leg of bed hard (Drg No FD/MAP/08(R)) complete all as specified and directed by Engineer-in-Charge.

M & L preparation of old treated steel surfaces of Bed Hard MAP as per drawing and applying a coat of synthetic enamel black paint complete all as specified.

CHAIR COMPUTER (FD/E6/MAP/01) Removing by unscrewing the unserviceable damaged Seat & back from each chair carefully .Removing the existing torn out tapsetry cloth ,pressed foam cushion,elastic webbing tape from each seat and back.The seat and back shall be fully upholstered by using new 60mm thick 40 density foam sheets and new webbing tape.The seat and back shall duly covered with new tapestry cloth of approved colour and texture ,the rate of cloth shall not be less than 350 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker.Complete all as specified and as directed.

Removing old unserviceable arm rest of chair and S&F new arm of same shape and size ,made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert all as specified and directed by Engr -in -charge.

Removing unserviceable castor twin wheels and S&F new castor twin wheel suitable for chair computer all as directed Engr -in -charge.

Removing unserviceable adjustable pedestal assembly with hydraulic system and S&F new pedestal assembly with hydraulic system having forward tilt, self regulating tilt tension and manual override, 4 position tilt lock. Anti shock back mechanism to prevent backrest. 360 swivel mechanism to allow with fluid lateral movement suitable for chair computer all as specified and directed by Engr -in charge.

Painting to all steel portion of chair computer with one coat of synthetic enamel black paint after cleaning,dusting and scratching the entire metal surface of chair with sand paper ,making surface neat and smooth.

RACK SHOE STEEL,FD/E6/MAP/02(R) Removing the existing damaged/rusted legs (U shaped) carefully without damaging the other parts by using hand held cutting machine,Supply and fixing new legs (U shaped) made out 25mm dia MS pipe 18 gauge duly welded to its position.Complete all as directed and shown on drawing.

Removing the unserviceable wire mesh (Jali) shelves, Supply and fixing new wire mesh (Jali) shelves made out of 3mm dia MS rods duly welded to its position.Complete all as directed and shown on drawing.

S & F new PVC shoe suitable to the leg complete all as specified and shown on drawing.

Material and labour for painting shoe rack steel by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint as per existing shade shall be applied externally and internally to complete shoe rack.The painting to each article shall only be carried out by spray machine only.

(Note :- All furniture repairs should be carried out at various units / BSO yards as per the direction of Engr- in-charge. Rates quoted shall be inclusive of all subsequent expenditure occured on carriying out repair at various sites ).

Chitturi Associates