Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Fee/PreQual/Technical/Finance 8 RAMBAGH KANWALI ROAD DEHRADUN | Admitted-Fee/PreQual/Technical/Finance |
| 2 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
| 3 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
| 4 | Not Admitted-Fee/PreQual/Technical/Finance | Not Admitted-Fee/PreQual/Technical/Finance Not qualified for AOC |
| 5 | Not Admitted-Fee/PreQual/Technical/Finance NEAR BANK OF BARODA 70 DEHRADUN ROAD RISHIKESH DISTRICT DEHRADUN | RISHIKESH | DEHRADUN | UTTARAKHAND | Not Admitted-Fee/PreQual/Technical/Finance Not qualified for AOC |
Tender Value
₹45.0 L
EMD Value
₹86,000
Closing Date
16 May 2023, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EE, PD, PWD, Haridwar
EE, PD, PWD, Haridwar
Construction of internal roads with BM and SDBC of Shivalik Nagar J-Cluster in constituency BHEL Ranipur Distt. Haridwar under State Sector (CM Ghosna 1808/2021) (Job 2)
2023_pwd_58007_2
941/2A Dated 06.04.2023
Open Tender
Civil Works - Roads
Item Rate
180 days
Haridwar
Please refer Tender documents.
2 documents required · 2 mandatory
₹3,540
EE, PD, PWD, Haridwar
₹86,000
17 May 2023
1 May 2023
17 May 2023
1 May 2023
16 May 2023
8 May 2023
Amount
Tack coat using VG-10 grade bitumen Over dry and hungry bituminous surfaces @0.40kg/sqm.
Bituminous Macadam Providing and laying bituminous macadam with hot mix plant 100-120 TPH using crushed aggregates of grading as per Table 500.4 premixed with bituminous binder, transported to site all lead and lift laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction 2.20 gm / cc and density 2.20gm/cc as per Technical Specification Clause 504. (Bitumen VG-30 @ 3.3% of the weight of mix has been used for analysis purpose Clause 504 of MORD) . The variation in actual % of bitumen and density found less than specified values than payment shall be adjusted accordingly.
Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503.
Providing and laying Semi Dense Bituminous Concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction 2.30 gm / cc and density 2.30gm/cc as per MoRTH specification clause No. 508 complete in all respects Grading II - 10mm using VG - 30 bitumen. The variation in actual % of bitumen and density found less than specified values than payment shall be adjusted accordingly.
Providing and laying of hot applied thermoplastic compound of ISI Mark Approved Quality of 2.5 mm thick including reflectorising glass beads @250 gms per sqm area, as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.
Road Studs / Cat Eye: Providing and fixing of single mould twin shank reflective road studs of ‘category A’ Raised pavement markers made out of poly carbonate/ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face with retro reflectance and chromaticity values shall be as given in the detailed specifications and the product shall conform to ASTM D4280. The raised pavement marker shall also meet all the testing conditions of ASTM D4280 and fixed to the road surface using the adhesive recommended by the manufacturer. Two cylindrical Polymer Shanks of not less than 20 mm diameter and not less than 30 mm length shall be molded in the RPM body. The reflective raised pavement markers shall also confirm to the MORTH circular No RW / NH. 33023/10/ 97-DO.III and the length ,height and width of the body shall not be less than 100 mm, 15 mm and 90 mm and base of marker shall be flat within 1.3 mm and outermost faces of configuration of marker shall not deviate more than 1.3 mm from a flat surface. The marker shall support a load of 13635 Kg tested in accordance with ASTM D4280. The marker shall withstand flexural strength of 909 kgf force in accordance with ASTM D4280. Marker lenses shall be moulded of Polycarbonate or methyl methecrylate conforming to ASTM D788. The area of each retro reflectory surface shall not be less than 13.0 sq.cm. The slope or retro – reflectory surface shall be 35 + 5 degree to base. Each reflector shall have a CIL not less than values specified in table 1 of MORTH Section 800 page no. 353 and should accompany two year warranty for satisfactory field performance from the manufacturer.
M/s V K Aggarwal
Triveny Consultants/Kuldeep Mehta
stage.html
html • 0.02 MB
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .