Shifting of the existing Rooftop Solar PV modules installed near STP to the Auditorium Parking at AIIMS, Jodhpur.

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, as required, duly suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.

100 mm width X 50 mm depth X 1.6 mm thickness (with 40 x 6 mm GI angle supports and 10mm dia GI rod hangers)

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of the following size directly in the ground, including excavation, sand cushioning, protective covering, and refilling the trench etc, as required-

Up to 35 sq mm

Above 185 sq. mm and up to 400 sq. mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required-

3½ X 300 sq. mm (70mm)

4 X 25 sq. mm (28mm)

Supply of the following size 1.1 grade XLPE insulated, PVC Sheathed, Aluminium conductor armoured cable conforming to IS 7098 (Part-1) 1988 with up-to-date amendments etc., as required.

3.5 X 300 Sq.mm. Al armoured Cable

Supply of following size 1.1 grade XLPE insulated, PVC Sheathed, Cu conductor Unarmoured cable conforming to IS 7098 (Part-1) 1988 with up to date amendments etc. as required.

4 X 25 sq mm Cu Unarmoured Cable

Medium clas PVC conduit pipe 40 mm ISI marked,along with all accessories sockect,coupler,bend etc

Solar MC4 Connector

Solar Mid Clamp with all accessories

Solar Inline MC4 fuse connector with 1000v 15 A current rating

Earthing with cu polished 3 m long including all accessories with cover plate having locking arrangememt

Solar DC cable 4sq mm

Shifting of existing 300KWP solar Modules, inverters, ACDB and other accessories from OPD parkimg(Near STP) to Auditroium Parking.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :

1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form for:

Foundations, footings, bases of columns, etc. for mass concrete

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.

Thermo-Mechanically Treated bars of grade Fe-500 D or more.

Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in:

Cement mortar 1:4 (1 cement : 4 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in :

cement mortar 1:4 (1 cement : 4 coarse sand)

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

Hot finished welded type tubes

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer- in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

12 mm cement plaster of mix :

1:4 (1 cement: 4 fine sand)

15 mm cement plaster on the rough side of single or half brick wall of mix :

1:4 (1 cement: 4 fine sand)

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge

In cement mortar

Grand Total

1. L1 will be decided on composite basis i.e. on basis of total of Civil + Electrical

2. The firm, who will fail to comply any of the above said condition, their bid will summarily be rejected.

3. I/We have gone through the terms & conditions as stipulated in the tender and confirm to accept and abide the same.

4. The above rates are exclusive of GST. GST will be payable as per actual rates at the time of payment.

5. Quantity mentioned above is tentative, it may increase or decrease as per site requirement.