Karnataka

Active

Works

Other Works

Repairs to B & C group Engineer quarters in vc colony Ashok Nagara Mandya

Cauvery Neeravari Nigam Limited

CNNL VC Div Mandya | Mandya, Karnataka

Amount: ₹80.2 LCloses: 23 Jun 20263d left

Tender Value

₹80.2 L

EMD Value

₹1.6 L

Closing Date

23 Jun 2026, 9:30 pm3d left

Similar Past Results

Similar tender results from the same govt authority in the past 3 years.

Tender Inviting Organisation

Name

Cauvery Neeravari Nigam Limited

Work Description

Repairs to B & C group Engineer Quarters

Tender Information

Tender ID

256576

Reference Number

CNNL/2025-26/OW/WORK_INDENT4145

Tender Type

Open

Product Category

Other Works

Location

CNNL VC Div Mandya

Source Website

Subscribe to view

Documents Required

6 documents required · 6 mandatory

Technical Bid

RequiredKPWD Registration Certificate of class III and above

RequiredAnnual Turnover Certificate issued by CA for last five years

RequiredSimilar nature of work

RequiredWork done Certificate with year wise executed quantity breakup duly certified by The Executive Engineer

RequiredTender capacity calculation with existing commitments details

RequiredLine of credit certificate in prescribed format

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Department Registration Details

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing work

List of works for which tenders already submitted

Banker Details

Conditional tenders will be rejected.

The tenderer shall bear all costs associated with the preparation and submission of his tender and the employer will in no case be responsible and liable for those costs.

The tender processing fee will neither be refunded nor will be transferred to other works.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of https://kppp.karnataka.gov.in /e-portal/index due to internet connectivity issues and technical glitches at bidders end.

The CNNL reserves the right of rejecting any or all of the tenders without assigning any reason and will not be bound to accept the lowest tender

Royalty on construction materials and other taxes will be deducted as per prevailing Government orders.a.The rates quoted by the contractor Shall be Excluding GST and GST shall be paid separately as applicable.The contractor is required to pay quarry Fees, Royalties, Octroi Dues levied by the state Government or any Local body or an authority and ground rent, if any, charged by the Executive Engineer for stacking materials. No Extra payment on this account will be made to the contractor.

Contractor has to make his own arrangement for procurement of all materials required for the work. There is no departmental supply of materials. Contractor should procure only ISI mark materials and submit necessary quality control certificates from the authorised quality control authority, before execution.

All scanned documents to be uploaded shall be in original and the Executive Engineer, VC Division, Mandya reserves the right to verify the documents before approval.

If any of the dates mentioned above happens to be General Holiday, the next working day will hold good in lieu of the date mentioned.

The work includes all lead and lift and work shall be carried out as per the instructions of the Engineer-in-Charge of the work.

One percent (1%) of the bill amount of the successful tenderer will be deducted towards the construction labour welfare fund as per Government Order LD / 300 / LET / 2006 Bangalore dated 18-01-2007 and Government letter No. PW / 134 / BMS / 2007 dated 27-07-2007.

Further details and information, if any, required can be had from the Office of the Executive Engineer, VC Division, Mandya, Karnataka, on all working days during office hours.

The work includes all lead and lifts and work shall be carried out as per instructions of Engineer in charge of the work. And all the specifications as per Indian Road Congress and relevant Indian codes. The rate for the specifications in the Schedule B includes all lead and lifts irrespective of distance and height, no extra charges will be paid for additional lead and lifts.

The authority competent to accept the tender shall have the right of rejecting all or any of the tenders without assigning any reasons and will not be bound to accept the lowest tender

Detailed Specification for the item of work separately attached

If the rate(s) quoted by Tenderer for any item(s) of work is/are below the estimated rates of the department then the contractor shall furnish an additional performance security in the form of demand draft/pay order/specify small savings instruments pledged to........... for an amount equivalent to the difference between the cost as per quoted rate and the estimated rates. The additional performance security furnished in the former case would be released if requested for by the contractor as and when the concerned item/items is/are satisfactorily and fully completed and are so certified by the next Superior officer of tender inviting authority.

The quoted rates of contractor should be exclusive of GST. GST will be payed separately based on the Govt. orders from time to time.

The valid copy of GST Registration Certificate along with latest GST paid challan should be uploaded.

Within 20 days of receipt of the letter of acceptance, the successful tenderer shall deliver to the employer a security deposit in any of the forms given below for an amount equivalent to 5% of the contract price and the difference amount for unbalanced tenders as additional performance security.

Contractor should follow strictly prevailing rules of Labour Act

The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the Standard Bid Document.

Copy of Income Tax returns filed for the year 2021-22 to 2025-26 is to be furnished.

The defect liability period shall be 3 Year from the date of completion certificate.The successful bidder should arrange for photographs for Three stage of each work spots before start of work. during progress of work and after completion of work with his own cost.

The intending bidder should furnish the certificate of KPWD Class-III and above.

Eligible Tenderers will be qualified only if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under Assessed available tender capacity (AxNx2.5 - B) where A Maximum value of civil engineering works executed in any one year during the last five years(updated to 2026-27 price level) taking into account the completed as well as works in progress.N Number of years prescribed for completion of the works for which Tenders are invited.B Value, at 2026-27 price level, of existing commitments and on-going works to be completed during the next. Years The intending bidder should furnish the certificate of registration issued by Class III and above of PWD any State.

Technical Criteria

Past Experience

Satisfactorily completed (at least 90% of the contract value), as prime contractor, at least one similar work such as Construction / Improvements of Building value not less than Rs.40.50 Lakhs. Note: Work done certificate issued by competent authority not below the rank of Executive Engineer should be furnished Financial turnover & Work done of previous years indicated above shall be given a weightage of 10% per year to bring them to the price level of 2026-27

Work Done Certificate

Executed in any one year (for a continuous period of 12 months), the following minimum quantities of work (1) Concrete (cum)215.00 (2) Steel (Tonne) 4.00 (3)Cement Plastering/Painting (Sqm) 5156.00 (4) PVC/UPVC pipes(Mtr) 1058.00 (5) Floor tiles/Granite/Wall tiles(Sqm) 1112.00.Note: Work done certificate with year wise breakup of quantities should be furnished.

Work Done Certificate

Capabilities of Vendor

Tenderers who meet the above specified minimum qualifying criteria will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as underAssessed available tender capacity (AxNx2.5-B) Where A Maximum value of civil engineering works executed in any one year during the last five years (updated to 2026-27 price level) taking into account the completed as well as works in progress,N Number of months prescribed for completion of the works for which tenders are invited, B Value at 2026-27 price level, of existing commitments and on-going works to be completed during the next 120 days

Others -- Tender Capacity Calculation with Existing Commitments details

Tenderers who meet the above specified minimum qualifying criteria will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as underAssessed available tender capacity (AxNx2.5-B) Where A Maximum value of civil engineering works executed in any one year during the last five years (updated to 2025-26 price level) taking into account the completed as well as works in progress,N Number of months prescribed for completion of the works for which tenders are invited, B Value at 2025-26 price level, of existing commitments and on-going works to be completed during the next 120days

Others -- Tender Capacity Calculation with Existing Commitments details

Financial Status

Achieved in at least two financial years an average annual financial turnover (in all classes of Civil Engineering construction works) only of Rs80.50 Lakhs Note : Turnover certificate duly certified by Chartered Accountant along with audited balance sheets should be furnished

Audited CA Certificate of Annual Turnover

Liquid assets and /or availability of credit facilities of no less than Rs24.00 Lakhs (Credit lines/ letter of credit/ certificates from scheduled / nationalized banks for meeting the fund requirement etc.) in the prescribed format.

Line of Credit

Others

Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)

Others -- Not Applicable

Total value of civl engineering works executed and payments received in the last five years (year-wise)

Others -- Not Applicable

List of existing commitments and ongoing works

Others -- Not Applicable

List of works for which tenders already submitted

Others -- Not Applicable

Banker Details for reference

Others -- Not Applicable

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Others -- Not Applicable

Reports on the financial standing of the tenderer, such as profit and loss statements and auditors reports for the last five years

Others -- Not Applicable

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

Others -- Not Applicable

List of Financial Resources with Certificates

Others -- Not Applicable

Fee & Financial Details

Tender Fee Amount

₹2,010

EMD Fee Amount

₹1.6 L

Important Dates

Last Activity

16 Jun 2026

Published

16 Jun 2026

Bid Opening

24 Jun 2026

Download Ends

23 Jun 2026

BOQ Preview

•

Repairs to B & C group Engineer quarters in vc colony Ashok Nagara Mandya

•

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground to the appropriate disposal area as per direction of Engi...

•

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking to the appropriate disposal area as per direction of Engineer-in-charge.Complete with all lead and lifts and...

•

Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material to the appropriate disposal area as per direction of Engineer-in-charge. 100 mm dia pipe Complete ...

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

•

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Complete with all lead and lifts and as Directed by Engineer in charge of the wor...

•

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/ trap/ basalt crushed graded coarse aggregates and fine ag...

•

Self Compacting Concrete Supply and placing the Design Mix of M-30 Grade for Self Compacting Concrete corresponding to IS 456-2000 (Re-affirmed 2021) and relevant IS codes using Batching plant, Transi...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) inc...

•

Half brick masonry with Non Modular fly ash bricks of class designation 5.0, conforming to IS :12894, in super structure above plinth and upto floor I level cement mortar 1 : 3 (1 cement : 3 coarse sa...

•

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing s...

•

Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corne...

•

Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...

•

Providing Raised and cut pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per...

•

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional c...

•

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having ...

•

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less tha...

•

Finishing walls with textured exterior paint of required shade :Old work (Two coats on existing cement paint surface applied @ 3.28 l/10 m² including preparing the surface after thoroughly cleaning t...

•

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One coats on old work as per specifications Complete with all lead and lifts and as Di...

•

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...

•

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 500X700 mm internal ...

•

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal exp...

•

Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uP...

•

Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing...

•

Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. Complete with all lead and lifts and as Directed by Engineer in charge of the work

•

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc...

•

Providing and fixing ISI marked M.S. pressed butt hinges bright finishedwith necessary screws etc. 125x65x2.12mm Complete with all lead and lifts and as Directed by Engineer in charge of the work

•

Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. 100x58x1.9mm Complete with all lead and lifts and as Directed by Engineer in charge of the work

•

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125mm Complete with all lead and lifts and as Directed by Engineer in charge of the ...

•

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 75mm Complete with all lead and lifts and as Directed by Engineer in charge of the wo...

•

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. Complete with all lead and lifts and as Directed by Engineer in charge of the work

•

Providing and fixing gun metal non- return valve of approved quality (screwed end) : 25 mm nominal bore Horizontal Complete with all lead and lifts and as Directed by Engineer in charge of the work

•

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :25 mm nominal bore . Complete with all lead and lifts and as Directed by Engineer in c...

•

Providing and fixing brass bib cock of approved quality : 15 mm nominal bore Complete with all lead and lifts and as Directed by Engineer in charge of the work

•

Providing and fixing brass stop cock of approved quality :15 mm nominal bore. Complete with all lead and lifts and as Directed by Engineer in charge of the work

•

Providing and fixing unplasticised PVC connection pipe with brass unions :45 cm length . 15 mm nominal bore. Complete with all lead and lifts and as Directed by Engineer in charge of the work

•

Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks. Complete with all lead and lifts and as Directed by Engineer in charge of the...

•

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...

•

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually c...

•

White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap. Complete with all lead and lifts and as Directed by Engineer in charge of the work

•

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making go...

•

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. Complete...

•

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 40 mm dia. Complete with all lead and lifts and as Directed by Engineer in charg...

•

Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 g. Complete with all lead and lifts and as Directed by Engineer in charge of the work

•

Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and ...

•

Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge.Comp...

•

Extra for fixing granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. Complete with all le...

•

Extra for providing opening of required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in Granite, including necessary holes for pillar taps etc. inc...

•

Polyurethane based Single Component for Existing Surface Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acrylic PU di...

•

Labour charges for cleaning, Light mazddor. Complete with all lead and lifts and as Directed by Engineer in charge of the work

•

Providing and laying water proofing treatment to the Water tanks & Liquid Retaining structures with two component acrylic polymer modifiedcementitious waterproofing membrane with minimum elongation of...

•

Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. Electronic stepped regulator. (Complete with all lead and lifts and as Directed by Engineer in charge of t...

•

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 6A Three Way 5 Pin Socket. Complete with all lead and lifts and as Directed by Engineer in charge of the wo...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying of feet -PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50 60Hz & Power fact...

•

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double b...

•

Supplying, fixing, wiring, earthelectrode for grounding conduits, I.C. cut outs and other equipment's on the meter board using 40mm dia 2.90mm thick GIpipe 2.5m long buried in a pit. The pit should be...

•

GI/Copper strips for grounding connections, using necessary fixing materials as required. 25 x 3 mm GI strip. Complete with all lead and lifts and as Directed by Engineer in charge of the work

•

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...

•

Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufactur...

•

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

•

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gre...

•

Supplying, installation, testing and commissioning of solar hot water heater comprising of high quality Evacuated Glass Tube (EGT) with absorber coating collector of size 58x1800mm. Innertank Material...

•

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...

•

Providing & fixing upvc ventilator with Exhaust Turbo speed fan with 5 blades (300mm x 300 mm & above sized fan) with copper motor having mounting arrangements as per direction of Engineer in charge o...

•

Work of supply and fixing of 40 amps star delta panel Boards upto 15Hp backwash pump motor as specified below: a. Supply and fixing of new upto 15 Hp star delta starter panel board for back wash motor...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

3rd notification 2026-27.pdf

Others - Tender Notification • 1.38 MB

Bid document KW3.doc

Tender Document • 5.02 MB

Ready to Participate?

Download all tender documents and submit your bid