PROVISION OF SASF AT JODHPUR (PHASE TWO OF TWO PHASES) (JOB NO. S/2974)

Amount

Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No 27

Lump sum price worked out by the contractor for "SITE CLEARANCE, EXCAVATION & EARTH WORK" as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No 28 (R)

Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 29

Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No 32

Lump sum price worked out by the contractor for "ROAD, PATH & CULVERT" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No 34

Lump sum price worked out by the contractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No 36

Lump sum price worked out by the contractor for "AREA DRAINAGE" as listed in Schedule ‘A’ Part-VII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No 37

Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No 38

Lump sum price worked out by the contractor for "LIGHTING PROTECTION" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No 39

Lump sum price worked out by the contractor for "FIRE ALARM" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No 40

Sch 'A' Sec-XI (MISCELLANEOUS ITEMS) Notes:- (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation & earth work except for the items which categorically includes for same shall be measured and paid separately under respective schedule.

INTERNAL ELECTRIFICATION S & F energy saving 9 Watt LED bulb input operating voltage range 100-270V AC, CCT-6500K, operating temperature -10 to 50 degree centigrade, PF more than 0.90, luminous flux equal/ greater than 460 lumens , CRI equal/ greater than 80, Base B22 all as specified and directed.

M&L LED security Light luminaire 30 watts, input operating voltage 120-270V, CRI - equal/greater than 70, CCT-6500K, PF more than 0.90,Luminous flux efficacy equal/ greater than 110 lumens per watt, IP 66 made out of pressure die cast aluminium powder coated housing high impact resistant 4mm thick toughened glass cover and matrix of power LEDs inbuilt electronic driver upto 10KV surge protection fitted with adjustable pole adopter with suitable GI pipe bracket 25mm dia 0.60 Mtr length fixed on wall with suitable flat iron clamps and nut bolts all as specified and as directed. Make: Crompton model LSTS-30-CDL-M or equivalent as per Appx 'C'.

S & F wall mounted compact one piece, decorative LED tube light fitting 1x10w comprises of extruded channel in thermally conductive material, high translucent serrated milky white diffuser, input operating voltage range 120-270V, CCT-6500K, view angle 120(Min),operating temperature -10 to 50 degree centigrade, PF more than 0.90, luminous flux efficacy equal/ greater than 100 lumens per watt, CRI equal/ greater than 75,THD equal/ less than15%, free of glare along with integrated constant current SMPS based LED driver complete and connecting to the point wiring with necessary flexible copper conductor of multistrand two core 1.0 sqmm of suitable length from fitting to the ceiling rose.

S & F wall mounted decorative box type tube light fitting suitable for T8 tube , double side connection including LED polycarbonate tube T8, 1x20W, input operating voltage range 120-270V, CCT-6500K, view angle 120(Min),operating temperature -10 to 50 degree centigrade, PF more than 0.90, luminous flux efficacy equal/ greater than 120 lumens per watt, CRI equal/ greater than 75,THD equal/ less than15%,free of glare along with integrated driver with metal heat sink complete and connecting to the point wiring with necessary flexible copper conductor of multistrand two core 1.0 sqmm of suitable length from fitting to the ceiling rose.

S&F roundel surface mounting LED panel, DC aluminium housing and high translucent frosted plastic diffuser along with integrated driver complete LED light 12 W, luminaire efficacy 100 lm/w and connecting to the point wiring with necessary flexible copper conductor of multistrand two core 1.0 sqmm of suitable length from fitting to the ceiling rose all as specified and as directed .

S&F ceiling fan of 1200mm sweep energy efficient, ISI Mark, super enamelled copper wound, class B insulation, rated power 50W+/- 10%,rated speed 350rpm+/-10%, power factor equal/ greater than 0.90, air delivery 226 CMPM, rated voltage 230V including down rod and connecting to the point wiring with necessary flexible copper conductor of multistrand three core PVC insulated unsheathed FRLS cable 1.5 sqmm of suitable length from fan to the ceiling rose complete as specified and directed.

S&F metallic body exhaust fan of 300mm sweep, energy efficient, super enamelled copper wound, class E insulation, rated power 55W +/- 10%,rated speed 900 rpm +/- 10%, Temperature rise 75degree centigrade Max, power factor equal/ greater than 0.90, air delivery 1275 CMH, rated voltage 220-240V with suitable size louver shutter including fixing/ grouting of frame in wall and cutting opening complete and connecting to the point wiring with necessary flexible copper conductor of multistrand three core PVC insulated unsheathed FRLS cable 1.5 sqmm of suitable length from fan to the ceiling rose complete as specified and directed.

S&F Wall mounted fan sweep 400mm, air delivery 5060 meter cube/hour, wall mounted swing type complete all as specified and directed

M&L for TV coaxial socket outlet deluxe including pressed steel sunken box of suitable size with cover plate & TV cable drawing through 25 mm dia PVC conduit pipe complete all as specified and directed

M&L for point wiring for three flame proof light controlled by one MCB at Main DB Box using approved colour coding (red, black and green) as per IS with 2.5sqmm, 3 run (phase neutral and earth) FRLS multi stranded copper conductor, single core PVC insulated and unsheathed 1100 V grade IS 694 marked TAC and FIA approved in and including surface mounted with saddles raw plug and fixing screw etc heavy duty electric resistance welded (ERW) stove enamelled steel conduit ISI marked as per IS: 9537(Pt 1) 1980 of suitable size with all flame proof conduit accessories such as bends, elbows, tees etc certified by CMRI Dhanbad as suitable for flame proof areas and sealed with Teflon tape on all conduits accessories complete all as specified and directed.

- -ditto- as item 21 above but four flame proof light controlled by one MCB at Main DB Box

. - -ditto- as item 21 above but five flame proof light controlled by one MCB at Main DB Box

M&L for CIMFR certified LED based flameproof high bay welglass luminaries of capacity 40W, diecast aluminium housing with heat resistant toughened glass, suitable for Gas/ vapour group of IIA & IIB & Zone, safety class IP 65 with and including connected to terminal with 3 core 1 sqmm sheathed copper cable and flexible metallic conduit weather proof complete all as specified and directed.

S&F LM 6 Flame proof Distribution board, 4 way with CMRI certified with provn and including following switch gear. (a) incoming : Flame proof rotary switch with MCB SPN 32 Amps, 10kA-01 No. (b) Outgoing : Flame proof rotary switch with 10 amp, 10kA SP-02 Nos complete all as specified and directed.

S&F LM 6 Flame proof Distribution board, 8 way with CMRI certified with provn and including following switch gear. (a) incoming : Flame proof rotary switch with MCB SPN 32 Amps, 10kA-01 No. (b) Outgoing : Flame proof rotary switch with 10 amp, 10kA SP-06 Nos complete all as specified and directed.

M&L for earthing complete with galvanised steel earth electrode 60 cm x 60 cm x 6 mm buried directly in ground vertically to depth not less than 2.25 m below normal ground level with top edge of the earth plate at a depth not less than 1.5 m below ground level connected to and including GI earth lead wire 4 mm dia by means of nuts, bolts, check nuts and washer etc, made of GI and connected to test point and earth dolly all as shown in electrical plate No. 3 SSR Part-I 2009 and specified or indicated including excavation and earthwork in any type of soil PCC (1:3:6) Type C1 in chamber, precast RCC 50 mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric or XPM (Weight not less than 4.00 Kg/Square metre) with cast iron frame, funnel with wire mesh, 20 mm bore medium grade GI watering pipe, lugs, 15 mm bore medium grade GI protection pipe, test point etc. complete all as specified and directed. Note:- (i) Item includes the cost of 7.5 metre GI pipe for protection of earth lead. (ii) Item includes the cost of 7.5 metre GI earth lead.

M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to and including earth lead of galvanized strip 32x6mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of SSR Part-I with connected to earth test point & to main switch board with & including adequate quantity of charcoal and common salt alround earth plate & 15 mm dia GI pipe medium grade for earth lead protection pipe fpr suitable length and GI pipe 20 mm dia medium grade for watering pipe with funnel & wire mess including necessary earth work and PCC (1:3:6) type C1 for earth pit and 40mm thick precast RCC cover in cement concrete 1:2:4 type B1, with 3 Nos 8mm dia TMT bars both ways with 12mm dia round bar handle complete all as specified and directed NOTE: Item includes the cost of earth lead and GI protection pipe up to 7.5 m. GI strip and protection pipe beyond 7.5 m shall be measured and paid for separately.

ROAD, PATH & CULVERT M&L for construction of 200mm thick (Compacted thickness) granular sub base by providing close graded material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lits, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power rolled to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. GSB work will be carried out with material conforming to Grade-I (size range 75mm to 0.075mm) having CBR value-30 complete all as specified and directed.

Earth work in any type of soil excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 1.5 km and lift upto 1.5m complete all as specified and directed.

M&L for Polythene film, black, 200 micron laid in floors over and including 25 mm thick sand filling (under PQC) complete all as specified and directed.

SEWAGE DISPOSAL M&L for construction of RCC Septic tank designed to carry sewage and sludge water, including excavation and earth work in any type of soil, disposal of surplus soils to a distance n.exc 50m, PCC 1:4:8 type D-2 using 40mm graded stone aggregate below foundation, vent shaft, connection etc complete for 50 Users complete all as per drawing No CEJZ/STR/23-G sheet No 1R/2 & 2/2

M&L for construction of Soakage well, excavation, in any type of soil, foundation in PCC 1:3:6 type C-2 using 40mm graded stone aggregate, walls of honey combed masonry with top ring of 25mm concrete, RCC cover slab in M25/SFRC cover, interconnecting pipes of RCC/DWC filled with brick bats of size 2.4m internal dia X 3.00 m effective depth complete all as per drawing No. CEJZ/TD/29 sheet 1/3 to 3/3.

EXTERNAL WATER SUPPLY Supply, laying, connecting, jointing and testing of ductile iron (DI) pipe class K-7, 100 mm dia laid in trenches with any length, suitable for tyton / rubber joint complete all as specified and directed.

S&F and testing ductile iron pipe fittings S/S and flanged (Special) suitable for tyton joints, heavy duty for spigot and socketed DI pipes such as bends (any type radius and angle, tapers, any type Straight bend, increasing, decreasing, or double socked etc) Tee pieces, ring branch, Y junction, double branch, cross (all socket or socket and spigot) collers, caps and plugs, adopters etc or any size radius and length confirming to IS specifications up to 150mm bore complete all as specified and directed.

Cutting existing DI/CI pipe line for fixing of TEE/Bend etc of pipe size 100/150 mm dia and making good complete all as specified and directed.

Supply, installation, connecting and testing sluice valve, non raising type spindle, cast iron body & wedge with Bronze wedge ring on both side, gland packing, class - PN 1.6 with flanged ends drilled suitable for bore of pipe 100 mm ISI marked (IS:14846:2000) having S.S spindle with iron wheel at top, complete with nuts bolts washers rubber gasket etc complete all as specified and directed.

M&L for brick masonary valve pit chamber of size 90 cm x 90 cm x 90 cm (internal sizes of chamber ) with and including MS sheet cover fabricated from 3.15 mm thick MS sheet and frame of angle iron 50 mm x 50 mmx5 mm with fixing arrangement, hinges and locking arrangement and painting two coat of synesthetic enamel paint over a coat of red oxide primer on MS cover and frame , including necessary excavation and earth work in any type of soil , returning , filling in approved soil disposal of surplus soil to a distance not exc. 50 mtr, 150 mm thick PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation , brick work in cement motor (1:6), 15 mm thick plastering in cement mortar (1:4) (both internally and externally) complete all as specified and directed.

M&L for sand cushioning to PVC cable with screened river washed sand and punning to provide a required cover complete all as specified and directed. Note :- Punned thickness shall only be measured and paid.

Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1, flat, size 250x150mm x40 mm laid flat for cable protection abutting each other laid dry width wise complete all as specified and directed.

S&F ABC type Fire Extinguisher of capacity 9 Kg ABC stored pressure type Fire Extinguisher 9Kgs capacity bearing ISI Mark for Fighting ABC Class of Fire manufactured strictly as per BIS: 15683:2018 bearing ISI Mark complete all as specified and directed.

S&F Water type Fire Extinguisher of capacity 9 Litre Fire Extinguishers, manufactured strictly as per BIS:15683:2018 bearing ISI mark complete all as specified and directed.

S&F CO2 type Fire Extinguisher pf capacity 4.5 KgCo2 type Fire Extinguisher 4.5Kgs capacity, made from brand new seamless cylinder, as per IS: 7285 and CCE approval, fitted with discharge hose and horn and wheel type valve with initial charge as per IS:15683: 2018 specifications, bearing ISI mark complete all as specified and directed.

S&F celing hook made up of steel (forged) with a handle of bamboo stick of length 3.2 metres (IS: 927) complete all as specified and directed.

S&F fire beater of components : (i) Handle - 1800mm length, 30 + 5 mm dia made up of heat insulative material (bamboo), (ii) Blade - consists of rectangular piece of steel wire mesh measuring 452 x 352 mm covered fully on both sides with stretched fire resistant canvas olive green in colour. Overall length of fire beater is 2300 + 30 mm. ( IS: 8096) complete all as specified and directed.

S&F fire buckets made up of mild steel black sheets with components : (i) handles - Mild steel top and bottom handles, (ii) Top rim - Mild steel wire for stiffening the top rim & (iii) Red Paint outside , White paint inside, black paint for painting ears, letters, handle (IS:2546) complete all as specified and directed.

S&F shovel ( GS) for fire fighting purpose complete all as specified and directed.

S&F fire gong/hand siren with components - (i) Siren body with disc and handle made up of aluminium alloy, rotor shall be of aluminium alloy, Gears shall be carbon steel made, operating handle made of CI or MS ii) portable floor stand - made up of mild steel tubes, (iii) Guard - made up of GI wire not less than 1.6 mm Dia & (iv) Water proof olive green canvas cover. Pitch of note emitted by siren shall between 300 to 1000 Hz, sound power output of siren when tested at 60 + 2 rev/min shall not be less than 1.5 W of acoustic power generated at sound pressure of not less than 118 dB. ( IS: 6026) complete all as specified and directed.

Supply, laying, connecting, jointing and testing of Pipe ductile iron S/S including special class k-7 supplied and laid complete 80mm dia. in any length, suitable for tyton/ rubber joint, laid in trenches complete all as specified and directed.

Supply, install, testing and commission of microprocessor based addressed two loop fully networkable panel, each loop having capacity of taking minimum 99 detectors and devices in any combination, the panel shall be soft addressable type. The panel shall be able to give pin point location of all fire/fault conditions, further the panel must be able to automatically switch off respective control switches whenever any alarm is triggered the panel shall have 30 zone indicators LED, inbuilt rectifier, loop card, RS-232 card, Rs-485 Network card, 144 character LCD unit to indicate Fire/Fault signal with address and analog output, internal SMF lead acid batteries with sealed cells of 24 Volts capable of running for a minimum 24 hours in normal condition and 30 MIN in alarm condition with internal battery charger complete all as per required and as in IS specifications

M&L for DI fittings/specials such as Tees, bends (any type, radius and angle) tapers any type, collars, tail pieces, caps and plugs of size upto 100 mm dia confirming to IS: 9523 complete all as specified and directed.

SHRI GURMUKHDAS CONTRACTORS PVT. LTD.

SOOD ASSOCIATES PVT LTD

Jeet Construction