Annual Repair and maintenance of Residential , Non Residential , water supply system and Electric work in CC Bikaner

CPVC pipe 20 mm outer dia.

CPVC pipe 25 mm outer dia.

CPVC pipe 32 mm outer dia.

U-PVC pipes (working pressure 4 kg / cm^2) Single socketed pipe 110 mm dia.Type-A..

Upvc Bend .87.5 degree 110 mm A..

Upvc tee 110*110*110 mm . A..

C.P Braas Bib cock 15mm .

C.P Brass Angle valve 15mm .

15mm PTMT Bibcock ..

H.P. or L.P. ball valve with polythene floats: 15 mm dia.

Bleaching powder .

G.I. Union 25 mm nominal bore.

Brass curtain rod 20 mm 1.25 mm thick .

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead.

Plaster on new surface on wall in cement sand mortar 1:6 including racking of joints etc. Complete fine finish:20mm thick.

Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete .New Plastered Surface (three or more coats).

Distempering with 1st quality acrylic washable distemper (ready mixed) of approved manufacturer and of required shade and colour completeincluding all scaffolding as per manufacturer's specification. Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect.

Brick work with common burnt clay F.P.S.(Non Modular) bricks of class designation 7.5 in superstructure above plinth level upto floor five level in all shapes and sizes in : Cement mortar 1 : 6 (1 cement : 6 coarse sand).

Add extra over item of brick work with class designation 10.0 in substitution of class designation 7.5.

Providing and fixing in cement sand mortar 1 : 4 single paitam (rebated) stone doors windows and ventilator frames of approved quarry :Size 100x 75mm.

Providing and fixing in CM 1 : 4 double paitam (rebated) stone door window and ventilator frames of approved quarry : size 100x75 mm.

Providing and fixing external grade board solid core single/ Double leaf flush door shutters IS: 2202(Part-II)1996 marked using Phenol formal dehyderesin in glue both sides with approved stainless steel fittings complete as per annexure 'A': 30 mm thick . Decorative teak veneer both side :

Providing and fixing IS : 3564 marked Aluminium die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc. complete complete.

P&f steel glazed doors , window and ventilators shutters of standerd rolled steel section joints mitred and welded with steel lungs 13*3 mm , 10 cm long embedded in cement concrete block 15*10*10 cm of 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggrigate 20 mm nominal size ) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with and nuts as required including providing and fixing of plain glass panes 4 mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws completes including priming coat of approvel steel primer , excluding the cost of metal beading and other fitting except necessary hings of pivots steel handles pegs stay etc. as required : window fixed .

Repair of existing steel glazed doors, windows and ventilator, MS sheet door, garge doors, compound wall gates etc. by welding drilling complete include. Cost of welding rods and hire charge of welding meachine and TP etc complete.

Repair of door, window shutters including cost of material and labour for change of damaged :Aldrop of mild Steel12" long x12mm dia12" long x12mm dia.

Renewing glass panes, with putty and nails wherever necessary: Float glass panes of thickness 4 mm .

Supplying and fixing in walls machine cut and polished stone shelves, tands and in CM 1:3 with machine cut edges :Kota stone minimum 30mm thick..

P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make 32 mm waste pipe complete including cutting & making good the wall :Size 450 mm x 300 mm

P & F European type white glazed vitreous china 1st quality W.C pan (IS :2556 Mark) with P or S trap including cutting and making good the wall and floor

P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor:size 530*410mm.

P&f pillar cock (IS 8931:1993 mark)of superior quality and approved make C.P Braas PIllar cock 15mm .

P&F beveled edge mirror of superior glass ( of approved qlty ) complete with 6mm thick hard board ground fixed to wooden cleats with CP brass screws and washers complete : size larger than 600*450mm* 4mm thick

Patch repair to cement concrete floor including digging out old floor in regular shape and removal of rubbish curing etc. complete in all respects.

Replacing broken roofing slab in patches including lime terrace, ceiling plaster etc. including removal of broken slabs.

Structural steel work in single section fixed with or without connecting plate including cutting, hoisting ( height upto 10 m ), fixing in position and applying a priming coat of approved steel primer all complete.

.Providing & Fixing of 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C tripping characteristic as per type of load and site requirement) 4KV impulse withstand voltage, as per PWD specification for electrical Works with ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IC 60947-2, low watt losses, trip free mechanism , energy limiting ofclass 3 as per IEC, minimum phase termination capacity of 35sq.mm. , conductorline load reversibility, label holding facility, IP 20 contact protection and fitted with existing distribution board/sheets, min. operation 20,000 upto 32 A rating and 10,000 upto 63 A, 5000 for 80 A rating including making connections, testing etc. as required. . OEM shall have submit NABL / CPRI / ERDA accredited lab test reports before execution & All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR Double pole MCB. 6 A to 32 A rating.

.Double pole MCB .6 to 32 A rating .

.Double pole MCB .50A 63 A rating .

four pole MCB. 6A to 32 A .

four pole MCB .50 A to 63 A

four pole MCB .100 A

SITC of 3 /4 pole current limiting Moulded case circuit breaker (MCCB) made of flame retardent & heat resistant material having following current rating, short circuit breaking capacity at 440/415 V, 50 Hz; O/L & S/C settings , conforming to IS/IEC 60947 P -2 :2003 with front face and centralised adjustable, trip free mechanisum, true contact position indicator, line load interchangeability, designed for both horizontal & vertical mounting without any adverse effect on electrical performance, suitable for operation upto 55 degree and without derating upto 40 degree, pollution degree 3, having positive isolation capability, push (test) to trip, trip time less then 10 ms under s/c condition, Breaking capacity Ics = 100% Icu. U imp =8 KV, rated insulation voltage 690 V. provision for UVR , shunt trip , earth fault trip, door interlock, pad lock & rotary handle , including making connections etc. as required.OEM shall have submit NABL / CPRI / ERDA accrediated lab type test certificate before execution All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR.4 pole MCCB With Thermal Magnetic release.up to 100 Amp , 25 kA, adjustable O/L & adjustable S/C setting,

P & F water closet Seat Covers with brass hinges complete :Solid PVC (ISI marked) grade-I White for EWC.

P & F Low level Flushing Cistern of 10 litres capacity (IS : 774mark). Of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS: 1703 mark) complete including cutting and making good the wall.

Rewinding of ceiling fan motor 900/1200m sweep .

. P & Replacement of M.S. Shaft of fan motor for DesertCooler/exhaust fan.Replacement of materialor components shall be use as per guidelines of OEM of original product. All the scrap material should be retainedby the contractor.

Servicing and overhauling of 20" sweep desert cooler including oiling, greasing, painting of tank from inside with rubber paint after properly desmantling each assembly and refixing the same as required. (PWD ELECTRIC BSR 2022 CHAPTER 25 ITEM NO. 26.15)

Replacement of cooler pads (heavy) set of 3 no. of size 25" x 27" (PWD ELECTRIC BSR 2022 CHAPTER 26 ITEM NO. E26.17)

P & F Brass float valve of weighing approx. 250 gm, 8" long rod,PVC ball of 4" dia. For desert coler as required.(PWD ELECTRIC BSR 2022 ITEM NO. E26.18)

P & F aluminiun blade for 20'' desert cooler fan as required.(PWD ELECTRIC BSR 2022 ITEM NO. E26.20)

P&F of submercible pump set suitable for 18/24 desert cooler(PWD ELECTRIC BSR 2022 ITEM NO. E26.30)

P & F fan motor suitable for 20" desert cooler including making connection testing etc. as required. With copper binding motor isi marked (PWD ELECTRIC BSR 2022 ITEM NO. E26.32.1)

Supplying and charging of fresh refrigerant and testing of performance of air conditioner/ fridge/ water cooler of following capacity including capallary and strainer/ filter. ..1.5 TR Window/ Split A.C. (PWD ELECTRIC BSR 2022 CHAPTER 26 ITEM NO. 26.42.2)

2.0 TR Window/ Split A.C. (PWD ELECTRIC BSR 2022 CHAPTER 26 ITEM NO. 26.42.3)

(d)60/120 Ltr. Water cooler (PWD ELECTRIC BSR 2022 CHAPTER 26 ITEM NO. E26.42.5)

Servicing of 1.0/1.5/2.0 TR capacity Split/ Window type air conditioner.As per pwd electric bsr 2022 code no 26.45

P & F of ventilating fans, Capacitor start, single phase with PVC impeller, ABS body, automatic openable louver shutter in existing opening including making connection, testing etc. as required.200mm sweep As Per PWD Electric BSR 2022 item no. E15.13.2 : 250mm sweep

10A bell push .as per pwd electric bsr 2022 code no 7.27.3

providing & Fixing of modular type lockable feature socket duly made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with IP-20 rating , including all as per pre approved by Engineer in charge,making connections, testing etc. as required. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR.6/16 A shuttered socket.As per pwd electric bsr 2022 code no 7.28.2

Providing & Fixing of single / multi tone electronic call bell as per PWD specification for electrical Works, including making connection testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR.

Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required 2 x 2.5 sq. mm.

2 x 4.0 sq. mm. .

2 x 1.5 sq.mm.

Providing & Fixing of modular type Step Fan regulator duly ISI marked (IS :11037) as per PWD specification for electrical Works, made out of unbreakable and fire retardant verginpoly carbonate with brass terminals and captive screws &silver alloy contact tip with IP-20 rating , minimum width of 1module switch toggle( PUSH PART ) should not less then20mm, including all as per pre approved by Engineer incharge, making connections, testing etc. as required. All as perpare approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR 5 step fan regulator 100 watt Two module

Providing & Fixing of energy efficient direct fit (Retrofit) Polycarbonate/ Glass housing SMD Mid Power LED tube rod (with integral driver & alumn. heat sink ), on existing fixture. system lumen efficacy ≥ 100 lm/Watt output, internal surge protection of 2.5 KV ,THD < 20% ,p.f.≥0.95,CRI >80 , life time of minimum 35000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80)certificate / Report from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR.1200mm, Min. Lumens output 2000 lm LED Tube rod with Glass Housing.As per electric bsr 2022 code no 17.2.3

Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4).

Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 and amp; IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar)

Extra for using size above 200x300mm in glazed tiles and for using 400mm x 400mm MAT finished tiles in place of 300mm x 300mm size.

P&F Jet spray for water closet with C.P. copper tube flange of approved make.

P & f mixing range (15mm). CP sink mixer with swinging spout J-pipe.

Providing & Fixing of BEE Star rated copper wounded double ball bearing capacitor start, aluminium body & Metallic blade ceiling fan Conforming to all the performance requirements laid down in IS 374:2019 including all amendments, as applicable ; & Carry BIS licensing (i.e. ISI marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .1200 mm Sweep BEE 3 Star rated (service value >=5.0 to< 5.5 ).

Provide 200 A , 415 V porcelain kitkat fuse (/HBC type) conforming to IS:2086,1983 0n existing board/ sheet

P/Laying P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with Copper conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size. 4 sqmm 3 core

6 sqmm 3 core .

Providing & Fixing of IK08, IP 66 protected LED Street Light Luminaire on existing bracket/pole. Fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with UV stabilized PC (UV stablization report submitted for UV cover ) /Toughened Glass cover and secondary lens on each LED & should be SMD type of 3 to 5 watt each . The System efficacy >=125 lm/ wt and potted driver & has a unique BIS R number with Input Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC and Auto resetting Safety , Power Factor >0.95 driver Efficiency >85% ,THD(I) <10% Humidity 10% to 90% RH Working Temp -5C to 45C . driver current <750mA. The luminaire shall be BIS certified and Trade mark certified. Life Expectancy Equal or more than 50000 burning hrs with Minimum 70% lumen maintened , CRI >70 and CCT 5700K +355K. Surge protection shall be min ≥ 4 KV internal and min 10 KV external inside driver compartment. driver should be Phase to phase protection of 440 V for 4 Hrs. Manufactures Word Mark/Name Engraved/Embossing on die cast housing to allow traceability/authenticity. Fixture shall be AS PER IS 10322 Complianced.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR.LED Street Light fixture with Minimum lumen output 2450 lm.

Rewinding of three phase squirrel cage induction motor of Monoblock pump sets including all necessary material and of the same characteristics as original with required sizeof super enameled copper wire including cost of copper wire E class insulation material and testing of moor on no load but to be guaranteed against testing on load at site including transportation of motor pump to and from Div AEn J En store complete as per direction of engineer incharge.O&M 5H.P

Rewinding of three phase squirrel cage induction motor of Monoblock pump sets including all necessary material and of the same characteristics as original with required sizeof super enameled copper wire including cost of copper wire E class insulation material and testing of moor on no load but to be guaranteed against testing on load at site including transportation of motor pump to and from Div AEn J En store complete as per direction of engineer incharge.O&M 20H.P

3.14 Routine maintenance of centrifugal coupled pump and motor including opening, cleaning, greasing and refitting / changing of ball bearing if required, gland refilling and replacing all rusted studs, replacing rubber bushes and coupling nut and bolts for coupling pulley,tightening all nut and bolts of foundation, baseplate, pump and motor etc.Checking and correcting alignment of pump and motor including necessary materials i.e. grease, nut and bolts, studs, washers, gland packing andrubber bushes etc. work done at site complete job 5 HP to 20 HP.O&M

3.14 Routine maintenance of centrifugal coupled pump and motor including opening, cleaning, greasing and refitting / changing of ball bearing if required, gland refilling and replacing all rusted studs, replacing rubber bushes and coupling nut and bolts for coupling pulley,tightening all nut and bolts of foundation, baseplate, pump and motor etc.Checking and correcting alignment of pump and motor including necessarymaterials i.e. grease, nut and bolts, studs, washers, gland packing andrubber bushes etc. work done at site complete job 20 HP to 30 HP.O&M

above 30 HP and upto 50 HP.O&M

3.15Cleaning of pump house by air blower/ vacuum cleaner or other means including removing of JALA from ceiling and walls etc. complete Job.HP.O&M

3.16Cleaning of Electric Panel PMCC by air blower/vacuum cleaner or other means including tightening of loose connections etc. complete job.HP.O&M

3.17 Replacing of damaged/broken gland packing plate with new gland packing plate suitable for centrifugal pump shafts and nut and bolts etc.complete job. 3.17.1 5 HP to 20 HP.HP.O&M

above 20 HP to and upto 30 HP.HP.O&M

above 30 HP to and upto 50 HP.HP.O&M

P & F G.I. Pipes (External Work) with G.I. fittings excluding union (IS : 1239 Mark) including trenching & refilling earth etc.20mm dia nominal bore.'A' Class.

P & F G.I. Pipes (External Work) with G.I. fittings excluding union (IS : 1239 Mark) including trenching & refilling earth etc.25mm dia nominal bore.'A' Class.

Emptying of Septic tank ,Soakage well etc. by disposing or sludge upto 5 Km. lead & taking out sewage including cleaning of site. .