Construction of Treasury Building at Damhal Hanji pora ( DH Pora ) kulgam

Select, At Par, Excess (+), Less (-) IOCL

Tender Inviting Authority: Executive Engineer R&B Division D.H Pora

Providing and Fixing of imported mild density fiberboard laminated prequet flooring of BVG/Action Tesa AC4 8mm or equivalent make of required colour and shade incl. cost of beading,foam and polythene complete as per directions of engineer in charge

Name of Work: Construction of Treasury Building at Damhal Hanji pora ( DH Pora ) kulgam Adv cost:- 83.643 Lacs = (contract price = 70.884 + GST=12.759) Lacs

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Items of Work Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes in Rs. P TOTAL AMOUNT Without GST TOTAL AMOUNT In Words

1 y rock by mechanical means in trenches for foundations (not exceeding 1.5 m in width) and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms all lifts including getting out excavated earth and disposal of surplus excavated earth as per directions of Engineer in charge 69.57 cum 225.179 Excess(+) Full Conversion INR

2 Earth work in excavation ordinar 20.87 cum 432.649 Excess(+) Full Conversion INR

3 Providing and laying stone soling duly hand packed in maintaning level and section including ramming and carriage of the same up to site of work complete. 29.78 cum 805.085 Excess(+) Full Conversion INR

4 Filling available excavated earth in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. 69.57 cum 191.47 Excess(+) Full Conversion INR

5 Providing and laying in position cement concrete 1:4:8 (1 Cement:4 Corase sand: 8 graded stone aggregate 40 mm nominal size ) including curing but excluding the cost of centring and shuttering. All work upto plinth level 43.5 cum 4561.356 Excess(+) Full Conversion INR

6 Providing and laying in position cement concrete 1:2:4 (1 Cement:2 Corase sand: 4 grade stone aggregate 20 mm nominal size ) including curing but excluding the cost of centring and shuttering. All work upto plinth level 71.29 cum 5778.515 Excess(+) Full Conversion INR

7 Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 25.05 cum 6828.051 Excess(+) Full Conversion INR

8 Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 26.93 cum 8610.766 Excess(+) Full Conversion INR

9 Centering and shuttering including strutting, propping etc. and removal of form work for

10 :Foundations, footings, bases for columns 328.73 sqm 251.042 Excess(+) Full Conversion INR

11 Suspended floors, roofs, landings, balconies and access platforms. 149.36 sqm 629.642 Excess(+) Full Conversion INR

12 Lintel, beams, plinth beams, girders, bressumers and cantilevers 55.88 sqm 506.335 Excess(+) Full Conversion INR

13 Earth work in excavation all kinds of soil by mechanical means in trenches for foundations (not exceeding 1.5 m in width) and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms all lifts including getting out excavated earth and disposal of surplus excavated earth as per directions of Engineer in charge 42.44 Rm 229.869 Excess(+) Full Conversion INR

14 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete. 23.97 sqm 502.171 Excess(+) Full Conversion INR

15 Brick work with common burnt clay (non-modular) bricks of class designation 7.5 above plinth level upto floor five level including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) 82.48 cum 7914.1 Excess(+) Full Conversion INR

16 12mm Cement plaster of mix: 1:6 ( 1 cement 6 fine sand ) 565.6 sqm 233.376 Excess(+) Full Conversion INR

17 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) 106.52 sqm 211.503 Excess(+) Full Conversion INR

18 Providing and applying white cement based putty of 2mm thick, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 672.12 sqm 158.725 Excess(+) Full Conversion INR

19 Edges of Slabs and breaks in floors and walls . under 20 cm wide 509.88 sqm 119.888 Excess(+) Full Conversion INR

20 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface 509.88 sqm 58.607 Excess(+) Full Conversion INR

21 Providing and fixing of 12 mm thick penelling of ist class imported kail wood on 12 mm thick ply board including applying three or more coats of sprit polish with necessary nails adhesive as per directions of Engineer in charge including cost of all materials as involved i.e ply board etc complete 268.77 sqm 2372.881 Excess(+) Full Conversion INR

22 Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) 153.16 sqm 162.364 Excess(+) Full Conversion INR

23 Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) 63.48 sqm 56.635 Excess(+) Full Conversion INR

24 Painting with synthetic enamel paint of approved brand and manufactureto give an even shade Two or more coats on new work 63.48 sqm 115.557 Excess(+) Full Conversion INR

25 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, colours, shades, size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 95.44 sqm 1077.546 Excess(+) Full Conversion INR

26 Cement concrete flooring 1:2:4 (1cement: 2 coarse sand 4 graded stone aggregate) finished with floating coat of neat cement including cement slurry and curing complete, 40 mm thick with 20mm nominal size stone aggregate 106.52 sqm 447.334 Excess(+) Full Conversion INR

27 Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of 16mm 18mm required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour and shade (Area of slab over 0.5 sqm) 12.09 sqm 2624.965 Excess(+) Full Conversion INR

28 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, colour laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. 17.74 sqm 971.071 Excess(+) Full Conversion INR

29 Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) 27.62 sqm 1658.049 Excess(+) Full Conversion INR

30 Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work 206.09 sqm 1016.949 Excess(+) Full Conversion INR

31 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length, Ist class Imported kail wood. 2.01 cum 46610.169 Excess(+) Full Conversion INR

32 Providing and fixing 35mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Ist class Imported kail wood. 21.89 sqm 1779.661 Excess(+) Full Conversion INR

33 Providing and fixing High Rib profile colour coated sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not lessthan 275 g/SQm. including ridges hips valleys 15.33 sqm 1864.407 Excess(+) Full Conversion INR

34 Providing and fixing 35mm thick glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Ist class Imported kail wood. 13.13 sqm 2076.271 Excess(+) Full Conversion INR

35 Providing and fixing 35mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :First class Imported kail wood 13.13 sqm 2033.898 Excess(+) Full Conversion INR

36 Providing and fixing of 3.5 mm thick float glass panes including necessary beadings and nails complete 45 sqm 762.712 Excess(+) Full Conversion INR

37 Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. Complete 10 no 687.329 Excess(+) Full Conversion INR

38 Providing and fixing ISI marked oxidized M.S. handles conforming to IS : 4992 with necessary screws etc. complete: 100mm 44 no 28.449 Excess(+) Full Conversion INR

39 Providing and fixing ISI marked oxidized M.S. handles conforming to IS : 4992 with necessary screws etc. complete: 125 mm 24 no 36.646 Excess(+) Full Conversion INR

40 Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete.

41 100X10 88 no 40.372 Excess(+) Full Conversion INR

42 150X10 24 no 53.829 Excess(+) Full Conversion INR

43 Structural steel work in built up sections, trusses and framed work, including cutting, welding, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 8616.19 kg 121.159 Excess(+) Full Conversion INR

44 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or more. 5736.56 kg 108.008 Excess(+) Full Conversion INR

45 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. 2 no 4937.897 Excess(+) Full Conversion INR

46 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 1 no 4815.904 Excess(+) Full Conversion INR

47 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. 3 no 3657.571 Excess(+) Full Conversion INR

48 Providing fixing of Vitreous china Pedestal of standard pattern for wash basins completely recessed at the back for the reception of pipes and fittings 3 no 1292.38 Excess(+) Full Conversion INR

49 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 610x510mm bowl depth 200mm with drain board 1 no 3840.362 Excess(+) Full Conversion INR

50 Providing & fixing PVC Flexible waste Pipe, of 40mm dia. for sink or wash basin coupling etc. complete 600 mm long 4 no 127.119 Excess(+) Full Conversion INR

51 Providing & fixing Stainless Steel Jali (Grating) with or without hole for waste pipe for N. Trap. Weight not less than 70 gms. 4 no 127.119 Excess(+) Full Conversion INR

52 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass serews and washers complete. 3 no 730.508 Excess(+) Full Conversion INR

53 Providing and fixing 600 X 120 X 5 mm glass shelf with edges round of supported on anodised alumunium angle frame with C.P. Brass fittings guard rail complete fixed with 40 mm long screw, rawl plug, etc. Complete. 3 no 554.071 Excess(+) Full Conversion INR

54 Towel rail C.P. brass 600 x20 mm together with a pair of C.P. brass brackets to fit the size of towel rail 3 no 423.729 Excess(+) Full Conversion INR

55 Providing and fixing Health Faucet of standard make 3 no 701.356 Excess(+) Full Conversion INR

56 Providing & fixing of gysers of standard 50lts make like including all fixtures and fittings jaquar, venus or equivalent 1 no 14406.78 Excess(+) Full Conversion INR

57 Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick Ist class imported kail wood 3 no 10169.492 Excess(+) Full Conversion INR

58 Providing & fixing of C.P elipsoidal tumbler holder including the cost of screws complete job 3 no 211.864 Excess(+) Full Conversion INR

59 Providing and fixing soap cases of C.P. Brass of standard quality 4 no 169.492 Excess(+) Full Conversion INR

60 Providing and fixing Angle Valve of standard make 25 no 677.966 Excess(+) Full Conversion INR

61 Providing and fixing PVC waste pipe of approved make 4 no 105.203 Excess(+) Full Conversion INR

62 Providing and fixing CP waste (Coupling)of approved make 4 no 169.492 Excess(+) Full Conversion INR

63 Providing and fixing 15 mm nominal bore C.P. brass bib cock standard make 11 no 677.966 Excess(+) Full Conversion INR

64 Providing and fixing C.P. brass single lever telephonic wall mixer of quality and make as approved by Engineer in charge. 15mm nominal dia jaquar, cera or equivalent make 4 no 5508.475 Excess(+) Full Conversion INR

65 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.

66 PN-16 pipe 20mm OD(SDR-7.4) 50 Rm 355.675 Excess(+) Full Conversion INR

67 PN-16 pipe 25mm OD(SDR-7.4) 70 Rm 404.946 Excess(+) Full Conversion INR

68 Providing and fixing ball valve (brass of approved quality complete:20mm nominal bore 4 no 476.002 Excess(+) Full Conversion INR

69 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 5000 ltr 7.671 Excess(+) Full Conversion INR

70 Providing and fixing PVC pipes including PVC fittings laid in required gradient, inclding cost of all fixing accessories complete as per directions of Engineer in charge

71 75mm dia 30 Rm 211.864 Excess(+) Full Conversion INR

72 100 mm dia 30 Rm 296.61 Excess(+) Full Conversion INR

73 150 mm dia 25 Rm 466.102 Excess(+) Full Conversion INR

74 Supply and fixing 150x100mm size square mouth S.W. Gully Trap P type, with C.I. grating, brick masonry chamber, and water tight C.I. cover frame 300x300mm size inside The wt. of cover & frame to be not less than 7.2 kg. 4 no 2118.644 Excess(+) Full Conversion INR

75 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6mm, with 40mm dia, steel pulleys, complete with bolts, nuts, locking arrangement, stoppers,handles, including applying a priming coat of approved steel primer with two or more coats of paint complete 7.99 Sqm 9118.942 Excess(+) Full Conversion INR

76 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes ,channels, plates etc. including welding, grinding,buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless stell nuts and bolts complete i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc of required size on the top of the floor or the side of waist slab with suitable arrangement As per the Design specification/selection 12 kg 660.808 Excess(+) Full Conversion INR

77 Providing and fixing Aluminium partition with 2.5"x 1.5" frame work, with 16 guaze, with 5mm ACP sheet for 50% area and 5mm glass panes and Aluminium grill for remaining portion with all necessary fittings like sliding bolts, handles, tower bolts in partion walls with sliding door at entires as per direction of engineer incharge 21.97 Sqm 2330.508 Excess(+) Full Conversion INR

78 Providing and fixing of iron Gate made out of angle iron, flat iron, iron hallow sections of requried size and gauge including cutting, welding and fixing in position with locking arrangements etc including applying a primming coat of approved steel primer and two or more coats of paint complete 57.6 Sqm 1737.288 Excess(+) Full Conversion INR

79 Providing and fixing of PVC Conduits i/c junction boxes, bends of approved quality etc as per directions in slab and walls complete 1 job 6101.695 Excess(+) Full Conversion INR

80 Carriage of different materials from source to site by mechanical transport incl. Loading, unloading stacking complete

81 Providing & fixing of gysers of standard 25 lts make like including all fixtures and fittings jaquar, venus or equivalent 148.42 Cum 160.944 Excess(+) Full Conversion INR

82 Stone agg. avg lead of 4 kms 94.83 Cum 456.18 Excess(+) Full Conversion INR

83 Sand avg lead of 30 kms 39178 No 0.956 Excess(+) Full Conversion INR

84 Bricks average lead 20 km

85 Earth work in excavation All kinds of soil by mechanical means in trenches for foundations (not exceeding 1.5 m in width) and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms, all lifts including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: Foundation in trench 33.51 cum 225.179 Excess(+) Full Conversion INR

86 Providing and laying stone soling duly hand packed in maintaning level and section including ramming and carriage of the same up to site of work complete. 1.25 cum 805.085 Excess(+) Full Conversion INR

87 Providing and laying in position cement concrete 1:4:8 (1 Cement:4 Corase sand: 8 graded stone aggregate 40 mm nominal size ) including curing but excluding the cost of centring and shuttering. All work upto plinth level 0.42 cum 4561.356 Excess(+) Full Conversion INR

88 Septic tank, Soakage Pit 4.25 cum 6637.939 Excess(+) Full Conversion INR

89 Brick work with common burnt clay (non-modular) bricks of class designation 7.5 upto plinth level including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) 1.37 cum 6828.051 Excess(+) Full Conversion INR

90 Centering and shuttering including strutting, propping etc. and removal of form work for:for Suspended floors 10.25 sqm 629.642 Excess(+) Full Conversion INR

91 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or more. 137.07 Kgs 108.008 Excess(+) Full Conversion INR

92 Carriage of materials by Mechanical transport, from source to site of work including loading, unloading and stacking complete

93 Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 1.59 cum 160.944 Excess(+) Full Conversion INR

94 Stone agg avg lead 4 km 1.85 cum 456.18 Excess(+) Full Conversion INR

95 Sand avg lead 30 km 2018 No 0.956 Excess(+) Full Conversion INR

96 Bricks avg lead 20 km

97 Earth work in excavation All kinds of soil by mechanical means in trenches for foundations (not exceeding 1.5 m in width) and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms, all lifts including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil. 45.83 cum 225.179 Excess(+) Full Conversion INR

98 Providing and laying stone soling duly hand packed in maintaning level and section including ramming and carriage of the same up to site of work complete. 9.83 cum 805.085 Excess(+) Full Conversion INR

99 Providing and laying in position cement concrete 1:4:8 (1 Cement:4 Corase sand: 8 graded stone aggregate 40 mm nominal size ) including curing but excluding the cost of centring and shuttering. All work upto plinth level 4.92 cum 4561.356 Excess(+) Full Conversion INR

100 Providing and laying in position cement concrete 1:2:4 (1 Cement:2 Corase sand: 4 grade stone aggregate 20 mm nominal size ) including curing but excluding the cost of centring and shuttering. All work upto plinth level 47.2 cum 5737.288 Excess(+) Full Conversion INR

101 Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 13.78 cum 6828.051 Excess(+) Full Conversion INR

102 Boundary Wall 206.61 Sqm 251.042 Excess(+) Full Conversion INR

103 Septic tank, Soakage Pit 37.46 cum 7914.1 Excess(+) Full Conversion INR

104 12mm Cement plaster of mix: 1:6 ( 1 cement 6 fine sand ) 227.65 Sqm 233.376 Excess(+) Full Conversion INR

105 Centering and shuttering including strutting, propping etc. and removal of form work for:for Foundations, footings, bases for columns 540 Kgs 113.97 Excess(+) Full Conversion INR

106 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or more. 1308.72 kg 108.008 Excess(+) Full Conversion INR

107 Carriage of materials by Mechanical transport, from source to site of work including loading and stacking complete

108 Providing & fixing of gysers of standard 25 lts make like including all fixtures and fittings jaquar, venus or equivalent 58.61 cum 160.944 Excess(+) Full Conversion INR

109 Stone agg avg lead 4 km 38.68 cum 456.18 Excess(+) Full Conversion INR

110 Sand avg lead 30 km 17793 No 0.956 Excess(+) Full Conversion INR

Total in Figures 4 Construction of chamber for 100mm sluice plates item5 10 Nos

Quoted Rate in Figures Select

Quoted Rate in Words