CONSTRUCTION OF RIVER BANK FILTERATION WITH BORING CONSTRUCTION OF SUMP and OHT BOOSTER PUMP RISING MAIN AND ITS APPURTENANT WORKS AT BAIRAGI CAMP SECTOR HARDWAR

Amount

Hiring of Rig machine with all T&P including Transportation, instalation, remuval of drilling machine etc complete upto 65 meter deep tube wells.

Making slot in pipe dia 200 mm in 2.0 lenth etc complete.

Drilling/Boring of bore well by bentonite in soft clay and sand including water arranggment for driling ,shrouding of pea gravel,back washing, collecting of samples from different strata, prepairing and submiting strata chat etc. includind supply of all materials complete.

From GL to 100 meter BGL

Per meter rate of reaming will be the 2% of the Driling rate of the pilot bore for per 25mm Dia increment in bore hole GL to 35 meter BGL for various dia will be.

For 200mm dia

Development of tube well by air compressor includind hirind of copressor, transportation, instalation,removal of compressor from site after completion of work with all T&P etc complete.

Development,yeild test of tube well by operating the pumping set continuosly for a desired period and measuring the discharge and drawdown of tube well at a suitable time interval as per the direction of engineer in charge including cost of energy.

Pumping Plant

Supply of submersible pump with moter of 15 H P ,46 meter head,having discharge 800 LPM KSB Make wth one pump motr set standbye complete..

Supply of 8 mm cable .

Supply of column M S pipe 80 mm dia 6.4 MM Thick including laying jointing etc complete.

Supply of M S D/ F Sluice valve of following dia including laying jointing etc complete.

Supply of Reflex valve of following dia including laying jointing etc complete.

, Supply and fixing of M S D/F Pipe 80 mm Dia etc complete.

Supply and fixing of 15HP panel etc complete.

, Supply and fixing of M S 80 mm Dia bend 900

,Supply fixing of bore well cap with clamp etc complete.

Supply of 100 KVA, 3 Phase, copper wound Servo Voltage Stabilizer, Indoor type.

25 Sq. mm Cu. submerssible cable 3 core, 1.1 K.V. Grade.

100 Amp., TPN, Change over switch. (Havells/L&T)

Complete GI earthing with materials such as earth plate, earth strips, coal, salt etc. required as per IE rules.

Installation

Commissioning

Testing

At works

At site

Centrifugal Pump

Supply of Centrifugal pump with moter of 52 H P ,66 meter head,having discharge 2000 LPM KSB Make with install pump pad check valves, gate valves ecentric plug valves ,combination air reales valves, suction and discharge pipes,ventilation hatch,flexible coupling , pipe suport,magmeter,suction and discharge gauges etc complete..

Starter pannel BCH Kit cat meter volt Amp Board etc.complete

Change over swtich

Cable 10 mmm for connections.

Supply of Loadmate 5 Ton x6. mts manual Geared cross Travel Trolly. Complete.

Making r c c foundations for installation of pumps etc complete

Over Head Tank

Supply of all materials, T&P etc.and construct an RCC over head tank of following size with RCC staircase & 1 m wide balcony, G.I. pipes railing consisting of 3 rows of 20 mm dia. G.I. pipe and angle iron posts around balcony & at the dome periphery, M.S. ladder from balcony to top of tank and inside the tank, supply and fixing M.H. cover with locking device, 1.2m dia ventilator, lightening conductor, water level indicator, supply and fixing of pipes, CI D/F pines, supply and fixing M.S. clamps with RCC column 40mm PCC 1:2:4 over 80 mm PCC 1:4:8 in apron, 150 mm semicircular drain around the tank, escape channel of 20 m length, box type enclosure at the entrance of the staircase having locking arrangements, two coats of apex paint and testing of tank for water tightness and also excluding cost of supply and fixing of all necessary pipes and valves etc. all complete with inlet, outlet, overflow and washout pipes with bypass arrangement and necessary fittings and specials and testing of bearing capacity.

2.5 m staging (500 KL)

Supplying carting , laying , jointing of MSERW pipes of following size, including welding with testing of pipe line complete.

125 mm Dia 4.80 mm thick

200 mm Dia 4.8 mm thick

250 mm Dia 4.8mm thick

300 mm Dia 4.8 mm thick

Painting of MSERW pipe inner outer sidewith black japan paint two coat and one coat of red oxid etc complete.

Dismantling of following type of road surfaces for laying of pipe line including sorting out of serviceable materials and disposal of unserviceable materials.

c:c road

Excavation of earth for pipe line in soil mixed with shingle ,bajri, and boulder strata lift up to 1.5 m. lead up to 30m. Including reffiling, watering, remaining lf excavated earth into the trenches and removal of surplus earth up to a distance of 60m from trenches including supply of labour T&P etc. all complete.

Reinstatement of following type of road surfaces after laying of pipe line including supply of all material ,labour,T&P etc complete.

Supply Following valves and fitting ISI marked medium class:- sluice valve

Constructing masonry Chamber 90x90x100 cm, inside with 75 class designation brick work in cement mortar 1:4(1 cement: 4 corase sand ) for sluice valve, with C.I. surface box 100x100x75 mm with hinge cover fixedin RCC slab 1:2:4 cement sand and 20mm grit necessary excavation foundation concrete 1:5:10 and inside plastering with cement mortar 1:3 .12mm thick finished with floating coat of neat cement chambers as per type design including supply of all materials labour T&P etc complete

Excavation in soil mixed with shingle & boulders in building work inclucding lift up to 1.5m and lead up to 30cm including back filling of excavated earth watering ramming removal and disposal of surplus earth upto 60m distance.

Provide and lay PCC 1:4:8 with cement local sand and 40mm gauge stone or brick ballast including supply of all materials labour T&P etc complete.

First class brick work in 1:6 cement and local sand mortar in foundation and plinth including supply of all materials, labour, T&P etc. required for proper completion the work.

First class brick work in 1:6 cement and local sand mortar in Super structure including supply of all materials, labour, T&P etc. required for proper completion the work.

RCC work (1:2:4) in cement ,coars sand and stone grit 20mm in plinth roof slab lintels shalves and chajjas including plaster with cement & fine sand mortor 1:4 and racking joints & supply of all materials T&P supploy of all materials T&P and labour etc complete.

Plinth beam, door beam, sun shade, lintel

Same as above but for beam and column in RCC 1:1.5:3

12 mm thick cement plaster with cement and fine sand mortor in 1:6 including racking of joints and supply of all materials labour T&P etc. complete. (40769)

Raised pointing with 1:2 with cement and fine sand mortor including racking of joints 1.27 cm depth and supply of all materials labour T&P etc. complete.

Provision for Stone Tiling including supply of all materials, labour, T&P etc. complete.

Supplying and filling in plinth or use for filter media with Jamuna sand under floors including, watering, ramming consolidating and dressing complete.

40 mm thick 1:2:4 cement concrete cement coarse sand and 10.12 mm gauge stone ballast laid in panels finished with floating coat of neat cement over 80 mm thick base concrete in 1:4:8 cement sand stone ballast 40 mm gauge including supply of all labour T&P etc. complete.

Cement concrete with 20 mm gauge approved stone ballast coarse sand and cement in proporation 4:2:1 including supply of all materials labour T&P etc. completed used as grading concrete.

Supply and fixing of MS glazed windows doors shutters with frame of sections including supply of all meterials labour T&P etc. (40541, 40554)

Applying one coat of white washing and two coat of distamper of approved shade on new work including supply of all labour materials T&P etc. complete.

Cement paint (Acrylic exterior paints) three coats

Painting new frams work, ordinary wood work with two coat of approved paint and one coat of primer including supply of all materials labour T&P etc.

M.S. Iron work on RCC wrought to required shape and sizes as necessary including its bending and supply of steel its for proper completion of work

Stone tile work for wall lining upto 1.5 m height with special adhesive over 12mm including all labour materials T&P etc. in 1:2 cement mortor.

Supply and fixing of sal wood / Chir wood frame & shutters doors / window with frame/holefast including supply of all materials labour T&P etc. complete.

Sal wood chaukhat frame 4"x3"

32 mm flush door shutter

Supply of all materials and construct 150 mm S.C. drain along the appron including supply of all labour T&P etc complete.

Making of holes for fixing suction and delivery pipe and remaking of walls after fixing.

Centering shuttering including struttings, propping etc. and removal of form work

Foundation

Column and footing

Lintel, Door Beam

Supply and fixing of girder of 350 mm × 140 mm size 15 m, over the pump house including its painting with approved paint and also one coat of primer.

Fixing of 3.6m wide M.S. gate with wicket gate including fabrication and supply of steel and construction of boundary pillars etc. all complete.

Construction of B.O.E. approach road including preparation of subgrade.(11.2)

Earth filling in water works compound (2.27)

Sanitary toilet

G.I Barbed Wire Fencing 0.6 Metre High Providing and fixing 0.6 metres high GI barbed wire fencing on 1.0 m angle iron post

Supply & fixing of 1.0m angle iron post of size60X60X6

Reinforced cement concrete M15 grade boundary pillars of standard design 2.5 m apart fixed in position including finishing and lettering but excluding painting

devendra prakash contractors