Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.9 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹25.7 L+₹84,530.92 (3.40%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | L3₹25.8 L+₹86,828.14 (3.49%)Rejected-AOC | L3 | Rejected-AOC L3 | |
| 4 | L4₹26.1 L+₹1.2 L (4.74%)Rejected-Finance | L4 | Rejected-Finance L4 | |
| 5 | L5₹26.2 L+₹1.3 L (5.42%)Rejected-Finance MASTHIKUND HOUSE CHENGALA POST KASARAGOD KERALA 671541 | KASARAGOD | KERALA | 671541 | L5 | Rejected-Finance L5 |
Tender Value
₹30.4 L
EMD Value
₹50,000
Closing Date
11 Oct 2022, 12:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer (Agri)
Office of the Executive Engineer(Agri), Northern Region, Puthiyara Post, Kozhikode - 673004 Phone No. 0495 2725354, 2933354
Construction of Rainshelters and rain water harvesting structures at Cashew Progeny Orchard, Adhur, Kasaragod district
2022_AGRI_512212_1
EE(2)1160/2022
Open Tender
Civil Works - Others
Item Rate
180 days
Cashew Progeny Orchard, Adhur, Kasaragod district
Please refer Tender documents.
7 documents required · 7 mandatory
₹2,500
Yes
₹50,000
Yes
5 Nov 2022
1 Oct 2022
13 Oct 2022
1 Oct 2022
11 Oct 2022
1 Oct 2022
1 Oct 2022 - 11 Oct 2022
Amount
Construction of Rain shelter (I) with rain water harvesting structure
2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size
5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
5.9.2 : Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
4.3.1 : Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns
10.1 : Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
50.10.1 : Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
50.10.2 : Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
10.2 : Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
13.63.1 : Painting with aluminium paint of approved brand and manufacture to give an even shade.Two or more coats on new work
13.9.1 : Cement plaster 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement.12 mm cement plaster
13.21 : Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.
od4384/2022_2023 : Supplying Aluminium channels lock for poly sheet and PVC coated zig zag locking wire
od4524/2022_2023 : Supplying and Laying 200 micron UV stabilized,5 layer transmission polyfilms on the GI trusswork with aluminium channels with zig zag Spring excluding cost of aluminium channel and zig zag spring
od4385/2022_2023 : Valleying with Aluminium sheet of 0.45mm thick or nearest available thickness, 600mm widewith over lap of 150mm at joints excludingplanking and including nails etc complete
50.18.8.9.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chased and making good the wall etc. 110 mm pipe 6kgf/cm2
od4386/2022_2023 : Supplying and fixing 6 inch square shaped PVC gutter pathy including clamping fittings
50.18.9.17.1 : Providing and fixing PVC pipes including fixing the pipe with clamps/ clip at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 6 Kgf/cm2 - External work - Exposed on wall
Rain shelter II
2.28.1 : Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.All kinds of soil
50.6.7.2 : Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour charges etc.
2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
2.9.1 : Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.Ordinary rock
4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
10.1 : Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
50.10.1 : Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
50.10.2 : Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
od4528/2022_2023 : Supplying Aluminium channels lock for poly sheet and PVC coated zig zag locking wire
13.63.1 : Painting with aluminium paint of approved brand and manufacture to give an even shade.Two or more coats on new work
od4529/2022_2023 : Supplying and Laying 200 micron UV stabilized,5 layer transmission polyfilms on the GI trusswork with aluminium channels with zig zag Spring excluding cost of aluminium channel and zig zag spring.
od4530/2022_2023 : Valleying with Aluminium sheet of 0.45mm thick or nearest available thickness, 600mm widewith over lap of 150mm at joints excludingplanking and including nails etc complete
50.18.8.9.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chased and making good the wall etc. 110 mm pipe 6kgf/cm2
od4533/2022_2023 : Supplying and fixing PVC gutter pathy (6 inch square shaped) with all labour charges including fittings ect
Mist Irrigation
50.18.7.6.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 6 Kgf/cm2 - Internal work- Exposed on wall
od4534/2022_2023 : Supply and laying of poly gromet take offwith rubber washer off 16mm for taking connectionfrom PVC submain
od4535/2022_2023 : Supply 16mm LLDP valves suitable for 16mm LLDP lateral pipe
od4536/2022_2023 : Supply and laying of 16mm LLDP lateral pipe for mist irrigation system
od4537/2022_2023 : Supply and laying 6mm LLDP microtube pipe with connecting pin
od4538/2022_2023 : :Supply and laying of poly end stop 16mm
od4539/2022_2023 : Supply and fixing poly connector 16mm for connecting 16mm LLDP lateral pipe
od4540/2022_2023 : :Supply and installation of 40-60lph mist with throwing diameter 1.50-2m at a height of3.20minside the chamber room including all material and labour cost
od4541/2022_2023 : :Supply of high quality insulated 2.50sqmm cable with three pin pluge
od4542/2022_2023 : :Supplying and fitting screen filter (metalic body) with fittings etc complete (20m3/hr)
od4544/2022_2023 : Supplying and fixing pvc 50mm submain flush valve
od4545/2022_2023 : :Supplying and fixing 1.00HP single phase monoblock electric pumpset with 4 star rating/ISI anda total head 15-20meters or nearest available, discharge 0.8-1.3 lps or nearest available including all suction and deliveryside fitting etc
Mohammed Nuhman
Mohammed Ali M
SHAFEEQ C.A
ABDUL NAZAR M A
Bidder Name
SHAFEEQ C.A
ABDUL NAZAR M A
Mohammed Nuhman
RAZAAK M H
Mohammed Ali M
stage.html
html • 0.05 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_733917.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .