Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹10.1 LAdmitted-Fee/PreQual/Technical/Finance VILL KALIPUR PS KAILASHAHAR UNAKOTI TRIPURA | KAILASHAHAR | UNAKOTI | TRIPURA | -27.99% | ₹10.1 L | L1 | Admitted-Fee/PreQual/Technical/Finance |
| 2 | L2₹11.4 L+₹1.2 L (12.3%)Admitted-Fee/PreQual/Technical/Finance VILL BOULAPASSA PS KAILASHAHAR UNAKOTI TRIPURA | -19.15% | ₹11.4 L+₹1.2 L (12.3%) | L2 | Admitted-Fee/PreQual/Technical/Finance |
Tender Value
Refer Docs
EMD Value
₹28,162
Closing Date
22 May 2026, 3:00 pmClosed
Chief Executive Officer KMC KLS
O/O the Chief Executive Officer KMC KLS
Re modeling of Ground floor Conference hall for office room of Kailashahar Municipal Council during the year 2025 2026.
2026_Urban_72945_1
NIeT No.03/KLS/MC/e-tender/26-27 Sl No.03
Open Tender
Civil Works
Percentage
120 days
In KMC Building
Please refer Tender documents.
5 documents required · 5 mandatory
₹1,000
₹28,162
25 May 2026
15 May 2026
22 May 2026
15 May 2026
22 May 2026
15 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | ITEM NO. 01.
Providing wood work in frames of doors, windows,clerestory windows and other frames, wrought framed and fixed in position : Local teak wood | - | CUM | 1,06,388.3 | - |
| 2 | ITEM NO. 02
Providing and fixing factory made Kitchen Cabinet Shutter/Partition 20 mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and laminated on both side by laminate Sheet/PVC foil lamination. The exposed edges shall be sealed with PVC edge beading of same shade and colour. The shutter shall be fire retardent having necessary screw holding capacity. Shutter shall be fixed to frame using approved hinges with necessary stainless steel screws, all complete as per direction of Engineer-in-charge | 66.15 | sqm | 4,828.3 | ₹3,19,392.05 |
| 3 | ITEM NO. 03
Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : a) 300x16 mm | 27 | nos | 287 | ₹7,749 |
| 4 | ITEM NO. 04
Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : a) 300x10 mm | 27 | nos | 135.2 | ₹3,650.4 |
| 5 | ITEM NO. 05
Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : a) 125 mm | 27 | nos | 68.8 | ₹1,857.6 |
| 6 | ITEM NO. 06
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up of gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawing and the direction of Engineerincharge. (Glazing and paneling and dash fasteners to be paid for separately) :-
A) For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing fittings wherever required including the cost of EPDM rubber / neoprene gasket required ( Fittings shall be paid for separately ):- i) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15). | 579.15 | kg | 555 | ₹3,21,428.25 |
| 7 | ITEM NO. 07
Aluminium Composite Panels of 4mm total thickness with Top coil – 0.50mm AA3003 / AA3105 / AA5005 Grade , manufactured as per IS-737 1986, FR Grade Class A2+ with 3mm Aluminium Corrugated Core as per standard EN 13501-1, class A2, and Bottom coil –0.50mm AA3003 / AA3105 / AA5005 Grade manufactured as per IS-737 1986 with minimum 25 microns lead free PVDF Coating conforming to AAMA2605 on top coil and Service coating on Back Coil (4 - 6 microns) having minimum panel weight of 4 Kg/m2 | 93.96 | sqm | 6,761.1 | ₹6,35,272.96 |
stage.html
html • 0.02 MB
finance_74231.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.48 MB
Tendernotice_2.pdf
PDF • 3.01 MB
BOQ_74231.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .