Proposed expansion of Sub Market Yard at Sarahan, Distt Sirmour, H.P. SH C/o 7 no. Shops and Toilet etc.

Excavation in foundations, trenches etc.in all kind of earth including their intermidate classification such as Pick work,jumper work.Blasting work,soft rock including chieling/welding cut of rock where blasting is prohibited,soft rock or hard rock,including bailing/pumping out water wherever possible/required by the Engineer -in-Charge from the edge of excavtion & then returncked soil in 15cm. layers,when required into plinths sides of foundations etc. consolidating each deposited layerby ramming & watering & then deposing of all surplus excavted earth in all leads & lifts including to the dumping site as will be decided by the Engineer -in-Charge.

Providing and laying mechanically mixed and vibrated cement concrete 1:4:8 (one cement isto four sand isto eight graded crushed stone aggregate 40mm (forty millimeter) nominal size) and curing complete, in or under water, including pumping or bailing out water/dewatering, removal of slush which may arise at the time of laying under water complete excluding the cost of form work in foundation and plinth in all depths/heights as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts. The rate inclusive of Malkhana, Royality, Octroi, GST, toll tax or any taxes imposed by the Government.

Providing form work of steel plates 3.15 mm. thick welded with angle iron in frame 30x30x5mm so as to give a rough finish including centering shuttering ,strutting and propping etc.with wooden ballies, height of propping and centering below supporting floor to ceiling upto all heights and removal of the same for in-situ reinforced concrete and plain concrete work including carrige of material in ll leads & lifts. Edge of slabs and breaks in floors and walls.Under 20cm wide.

Providing form work of steel plates 3.15 mm. thick welded with angle iron in frame 30x30x5mm so as to give a rough finish including centering shuttering ,strutting and propping etc.with wooden ballies, height of propping and centering below supporting floor to ceiling upto all heights and removal of the same for in-situ reinforced concrete and plain concrete work including carrige of material in ll leads & lifts.Sloped surfaces

Providing and laying mechanically mixed & vibrated cement concrete 1:1.5:3 (1cement :1.5 sand :3 graded stone aggregate 20mm. nominal size) and curing complete excluding cost of form work and reinforcement for feinforced concrete work in,with in all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge foundation footing bases of columns and the like and mass concrete.

Providing and laying Tor steel reinforcement of TATA, sail , Rashtriya Ispat or its substantial equivalent make for Reinforced Cement Concrete work including bending, binding and placing in position complete including cost of binding wire and other incidentals due for its completion up to all floor level complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, GST, toll tax or any taxes imposed by the Government.

2nd class brickwork using common burnt clay building bricks in in foundation & Plinth in Cement mortar 1:6 (1 Cement :6sand) including carraige of material in all leads and lifts.

2nd class brickwork using common burnt clay building bricks in in super structure above plinth level upto floor all level in Cement mortar 1:6 (1 Cement :6sand) including carraige of material in all leads and lifts.

Half brick masonry in common burnt clay building brick in super structure above plinth level upto floor all level in Cement mortar 1:4 (1 Cement :4 sand) including carraige of material in all leads and lifts.

Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows including bright finished /black enamelled iron butt hinges with necessary screw : 35mm thick (i) 2nd Class deodar Wood including carraige of material in all leads and lifts.