COMPREHENSIVE DAY TO DAY MAINTENANCE AND CERTAIN REPAIR WORKS OF SAILORS MD ACCN AT SECTOR I AND II OF SMA RAMESHWARAM UNDER GE FORT KOCHI

Amount

Attending the following day to day maintenance complaints and repair works of Sailors MD Accn at Sector I & II of SMA Rameswaram Quarters and rectify the complaints to the entire satisfaction of Engineer-in-Charge. Note :- (i) The rate quoted shall be deemed to be included for the cost of minor items like insulation tape, screws, etc. (ii) The materials required for replacement shall be measured and paid seperately under respective item. (iii) Complaints lodged by users will be attended on all working days including sundays/holidays also. (iv) Minimum one electrician and one mate shall be detailed for one set of complaints, with all required tools in neat tool bag. (v) The trademen shall wear uniforms with safety shoes incl all necessary safety gear. (vi) Complaints/job cards shall be collected from complaint cell by 0900 Hrs everyday and trade men should submit the feedback of complaints within 24 Hrs. All urgent jobs/complaints like no electric supply/power cut off etc. and similar nature urgent jobs/complaints shall be attended within 06 hrs, if fails to attend the complaint in 24 Hrs for routine jobs/ 06 Hrs for urgent jobs and GE/ Engr-in-Charge is not satisfied with reason for delay in working then the penalty of Rs. 500.00/complaint/day shall be recovered from contractor.

Taking up carefully defective switch /socket /regulator/bell/bell push/holder/light fittings etc after disconnecting the electrical connections safely and keeping ready of any size/ make complete all as specified and as directed.

Supply and fix switch piano, flush type, single pole, one way, 6 Amps, complete all as specified and as directed by the Engr-in-Charge

Supply and fix switch piano, flush type, single pole, two way, 5 Amps,complete all as specified and as directed by the Engr-in-Charge

Supply and fix switch socket combination outlet multipurpose 2 in 1, 5 pin, 6 Amps and 2 pin 6 Amps flush type complete all as specified and as directed by the Engr-in-Charge

Supply and fix switch socket combination, 2 in 1, 3 pin, 6 Amps and 16 Amps flush type universal complete all as specified and as directed by the Engr-in-Charge

Supply and fix socket outlet multipurpose 2 in 1, 3 pin 6 Amps complete all as specified and as directed by the Engr-in-Charge

Supply and fix socket outlet multipurpose, 3 pin, 6 Amps and 16 Amps complete all as specified and as directed by the Engr-in-Charge

Supply and fix switch piano, flush type, single pole, one way, 16 Amps,complete all as specified and as directed by the Engr-in-Charge

Supply and fix ceiling rose PVC poly carbonate, isolated body with two to three terminals including connection ISI marked complete all as specified and as directed by the Engr-in-Charge

Supply and fix lamp holder, PVC / Poly carbonate type with cord grip cap suitable for pendent/batten/angle fittings complete all as specified and as directed by the Engr-in-Charge

Supply and fix bell push, flush type, 5 Amps complete all as specified and as directed by the Engr-in-Charge

Supply and fix bell Ding Dong AC. 230 volts, single pole complete all as specified and as directed by the Engr-in-Charge

Supply and fix Modular switch 1 way 6A,1 module complete all as specified and as directed by the Engr-in-Charge

Supply and fix Modular switch 1 way 16A,1 module complete all as specified and as directed by the Engr-in-Charge

Supply and fix Modular Bell push 6A, 1 module complete all as specified and as directed by the Engr-in-Charge

Supply and fix modular Socket, 6A - 2/3 pin combined 2 module, complete all as specified and as directed by the Engr-in-Charge

Supply and fix modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and as directed by the Engr-in-Charge

Supply and fix MCB SP 6 to 32 Amps, 240 Volt, having breaking capacity 10 kA, B curve with visual indication complete all as specified and as directed by the Engr-in-Charge

Supply and fix MCB SPN, 32 Amps, 240 Volt, having breaking capacity 10 kA, C curve complete all as specified and as directed by the Engr-in-Charge

Supply and fix MCB TPN, 40 to 100 Amps, 415 Volt, having breaking capacity 10 kA, B curve complete all as specified and as directed by the Engr-in-Charge

Supply and fix round shape 12 Watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complet with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by the Engr-in-Charge.

Supply and fix surface mounted LED integrated batten four feet long, 22/20 Watt comprises of polycarbonate housing, integrated electronic driver, diffuser etc and all accessories pre-wired including connecting up complete all as specified and as directed by the Engr-in-Charge.

Supply and fix surface mounted LED fitting 2 feet, 9/10 Watt comprises of polycarbonate housing, integrated electronic driver, diffuser etc and all accessories pre-wired including connecting up complete all as specified and as directed by the Engr-in-Charge

Supply and fix 2 pin type LED lamp B22 10 watts suitable for existing angle/batten holder comprises of high pressure die cast aluminium housing, polycarbonate cover, etc complete all as specified and as directed by the Engr-in-Charge

Supply and fix decorative wall light fixture made up of polycarbonate 9 Watts comprises of polycarbonate housing, high efficiency diffuser polycarbonate cover, lamp 9 Watts warm white, etc and all accessories pre-wired including connecting up complete all as specified and as directed by the Engr-in-Charge

Supply and fix of LED building security light fitting 30 watts protection comprises of a pressure die cast aluminium housing, polycarbonate cover, high power LED with lenses, 10KV built-in-surge protection, electronic driver, etc and all accessories pre-wired including connecting up with PVC insulated copper conductor cable 1.5 Sqmm, 3 core as required for connections and 32 mm bore light grade G I tube mounting bracket of 1.5 metre in length, bend to shape at 140 degree in ‘L’ shape and fixed to wall by means flat iron clamps, nuts, bolts and washers etc complete all as specified and as directed by the Engr-in-Charge.

Supply and fixing in repairs 3mm thick hylum sheet, cut to suitable size, cutting holes for fixing switches, regulators, sockets etc complete all as specified and as directed by the Engr-in-Charge

S&F MCB DB double door made of sheet steel phosphates, powder coated painted with bus bar, neutral link, earth bar and rail double door type SPN 240 volts 8 way fixed concealed /recessed having IP-43 protection including cement mortar 1:3 for making good to distrubed surface match with existing surface including colouring complete all as specified and as directed by the Engr-in-Charge

All as per srl item No 29 here-in-before but for 240 Volts SPN 12 way complete all as specified and as directed by the Engr-in-Charge

All as per srl item No 29 here-in-before but for 240 Volts SPN 4 way complete all as specified and as directed by the Engr-in-Charge

All as per srl item No 29 here-in-before but for 415 Volts TPN 4 way complete all as specified and as directed by the Engr-in-Charge

Supply and fixing in repairs sheet metal enclosure with two pin and earth plug and socket complete with one MCB 20 Amps single pole having breaking capacity 10 kA complete all as specified and as directed by the Engr-in-Charge

M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6mm thick, burried directly in ground (earth pit not less than 2.25 mtrs below ground level) with top edge of the plate not less than 1.5 mtr normal ground level, connected to GI strip 32x6mm size as earth lead by means of bolts, nuts , check nuts and washers of GI or steel as shown in electrical plate No 3 connected to earthing test point, testing, (Earthing shall be interconnected) including necessary excavation, 50mm thick RCC 1:2:4 cover reinforced with 8mm TMT bars 100 mm c/c in both ways at, test point and watering pipe complete, including connecting to earthing test point or to DB / Panel, salt, charcoal, removal of surplus soil etc, complete as directed by Engr in charge and testing resistance etc complete including taking down old earthing complete all as specified and as directed. Note: (i) The rate quoted shall be deemed to be included for main earth lead from earth electrode to test point up to 7.5 m only. (ii) On testing after completion if the desired earth resistance not obtained as per IE rules the earthing will be redone by the contractor as directed by Engnr in charge with out any extra cost to Govt.

M&L for pouring of salted water in to each earth pit through water pipe, minimum of 100 Ltrs dissolved with 5 Kgs of common salt to each earth pits / electrodes at various sub staions / buildings for improving the earth conditions complete all as specified and as directed by the Engr-in-Charge Note :- . The contractor has to arrange water and transport to various sub stations / installations for the above purpose and Testing of Earth resistance of Electrical earthings of various types, at various Buildings / sub stations by using digital type Electrical earth Tester instruments, registering the test results in the prescribed proforma including cleaning the earth chamber, identifying the earth lead wire, testing and writing by paint the test reults, date of testing etc. on the chambers all as specified and as directed . The job/test will be carried out in the presence of department staff and deatils registered all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket etc) complete, incl fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings, lamp holder etc,refixing removed fittings and making good the disturbed surface of wall to match with existing surface complete all as specified and as directed by the Engr-in-Charge

Taking down carefully copper/aluminium submain wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors, roofs etc complete all as specified and directed by Engr-in-Charge.

Taking down unserviceable DB of any size complete all as specified and directed.

M & L for point wiring in and including rigid non metallic PVC conduit medium grade ISI marked of suitable dia on surface of wall/ceiling, with 1.5 Sqmm PVC insulated unsheathed stranded copper conductor cable, single core, 1100 volts grade as per IS colour code, with pressed steel terminal boxes of suitable sizes and 1.6mm thick duly painted inner and outside for mounting switches, sockets, fan regulator etc with 3mm thick plastic laminated sheet cover with brass screw, cup washer and including PVC insulated and unsheathed stranded copper condutor of 1.5 Sqmm as continuous earth wire for one light point controlled by one switch complete all as specified and directed by Engr-in-Charge.

All as per srl item No 40 here-in-before but for one exhaust fan point controlled by one switch complete all as specified and directed by Engr-in-Charge.

All as per srl item No 40 here-in-before but for one fan point by one switch and regulator complete all as specified and directed by Engr-in-Charge.

All as per srl item No 40 here-in-before but for one 5 Amps socket outlet point on same board alongwith other switch complete all as specified and directed by Engr-in-Charge.

All as per srl item No 40 here-in-before but for one 5 Amps socket outlet point on independent board controlled by one switch complete all as specified and directed by Engr-in-Charge.

M & L for point wiring in and including rigid casing and caping, ISI marked of suitable dia on surface of wall/ceiling, with 1.5 Sqmm PVC insulated unsheathed stranded copper conductor cable, single core, 1100 volts grade as per IS colour code, with pressed steel terminal boxes of suitable sizes and 1.6mm thick duly painted inner and outside for mounting switches, sockets, fan regulator etc with 3mm thick plastic laminated sheet cover with brass screw, cup washer and including PVC insulated and unsheathed stranded copper condutor of 1.5 Sqmm as continuous earth wire for one light point controlled by one switch complete all as specified and directed by Engr-in-Charge.

All as per srl item No 45 here-in-before but for one exhaust fan point controlled by one switch complete all as specified and directed by Engr-in-Charge.

All as per srl item No 45 here-in-before but for one fan point by one switch and regulator complete all as specified and directed by Engr-in-Charge.

All as per srl item No 45 here-in-before but for one 5 Amps socket outlet point on same board alongwith other switch complete all as specified and directed by Engr-in-Charge.

All as per srl item No 45 here-in-before but for one 5 Amps socket outlet point on independent board controlled by one switch complete all as specified and directed by Engr-in-Charge.

M & L for point wiring non metallic PVC conduit medium grade ISI marked of suitable dia on surface of wall/ceiling, with 2.5 Sqmm PVC insulated unsheathed stranded copper conductor cable, single core, 1100 volts grade as per IS colour code, with pressed steel terminal boxes of suitable sizes and 1.6mm thick duly painted inner and outside for mounting switches, sockets, fan regulator etc with 3mm thick plastic laminated sheet cover with brass screw, cup washer and including PVC insulated and unsheathed stranded copper condutor of 2.5 Sqmm as continuous earth wire complete all as specified and directed by Engr-in-Charge.

M & L for point wiring casing and caping, ISI marked of suitable dia on surface of wall/ceiling, with 2.5 Sqmm PVC insulated unsheathed stranded copper conductor cable, single core, 1100 volts grade as per IS colour code, with pressed steel terminal boxes of suitable sizes & 1.6mm thick duly painted inner & outside for mounting switches, sockets, fan regulator etc with 3mm thick plastic laminated sheet cover with brass screw , cup washer & including PVC insulated & unsheathed stranded copper condutor of 2.5 Sqmm as continuous earth wire complete all as specified and directed by Engr-in-Charge.

M & L for point wiring in existing PVC conduit medium grade/casing and caping of concealed/open, ISI marked of suitable dia, with 1.5 Sqmm PVC insulated unsheathed stranded copper conductor cable, single core, 1100 volts grade as per IS colour code, with pressed steel terminal boxes of suitable sizes & 1.6mm thick duly painted inner & outside for mounting switches, sockets, fan regulator etc with 3mm thick plastic laminated sheet cover with brass screw, cup washer & including PVC insulated & unsheathed stranded copper condutor of 1.5 Sqmm as continuous earth wire for one light point controlled by one switch complete all as specified and directed by Engr-in-Charge.

All as per srl item No 52 here-in-before but for one exhaust fan point controlled by one switch complete all as specified and directed by Engr-in-Charge.

All as per srl item No 52 here-in-before but for one fan point controlled by one switch and regulator complete all as specified and directed by Engr-in-Charge.

All as per srl item No 52 here-in-before but for one 5 Amps socket outlet point on same board alongwith other switch complete all as specified and directed by Engr-in-Charge.

All as per srl item No 52 here-in-before but for one 5 Amps socket outlet point on independent board controlled by one switch complete all as specified and directed by Engr-in-Charge.

M & L for point wiring in existing PVC conduit medium grade/casing and caping of concealed/open, ISI marked of suitable dia, with 2.5 Sqmm PVC insulated unsheathed stranded copper conductor cable, single core, 1100 volts grade as per IS colour code, with pressed steel terminal boxes of suitable sizes & 1.6mm thick duly painted inner & outside for mounting switches, sockets, fan regulator etc with 3mm thick plastic laminated sheet cover with brass screw , cup washer & including PVC insulated & unsheathed stranded copper condutor of 2.5 Sqmm as continuous earth wire complete all as specified and directed by Engr-in-Charge.

M&L for sub main wiring with 2 runs of 2.5 sqmm PVC insulated unsheathed 1100 volt grade multistranded copper conductor including PVC conduit and provision of one run 2.5 sqmm PVC insulated unsheathed single core copper conductor as earth continuity , connected to earth dolly inclusive of all accessories complete all as specified and directed by Engr-in-Charge. Note : 3 runs of 2.5 sqmm copper conductor and one run of PVC conduit shall be measured as one unit length.

M&L for sub main wiring with 2 runs of 2.5 sqmm PVC insulated unsheathed 1100 volt grade multistranded copper conductor casing & caping of suitable size and provision of one run 2.5 sqmm PVC insulated unsheathed single core copper conductor as earth continuity , connected to earth dolly inclusive of all accessories complete all as specified and directed by Engr-in-Charge. Note : 3 runs of 2.5 sqmm copper conductor and one run of casing and caping shall be measured as one unit length.

M&L for sub main wiring with 2 runs of 4 sqmm PVC insulated unsheathed 1100 volt grade multistranded copper conductor including PVC conduit and provision of one run 4 sqmm PVC insulated unsheathed single core copper conductor as earth continuity connected to earth dolly inclusive of all accessories complete all as specified. Note : 3 runs of 4 sqmm copper conductor and one run of PVC conduit shall be measured as one unit length.

M&L for sub main wiring with 2 runs of 4 sqmm PVC insulated unsheathed 1100 volt grade multistranded copper conductor casing & caping of suitable size and provision of one run 4 sqmm PVC insulated unsheathed single core copper conductor as earth continuity , connected to earth dolly inclusive of all accessories complete all as specified. Note : 3 runs of 4 sqmm copper conductor and one run of casing and caping shall be measured as one unit length.

M&L sub main wiring with 2 runs of 2.5 sqmm PVC insulated unsheathed 1100 volt grade multistranded copper conductor in existing PVC conduit /casing and caping of suitable size and provision of one run 2.5 sqmm PVC insulated unsheathed single core copper conductor as earth continuity , connected to earth dolly inclusive of all accessories complete all as specified and directed by Engr-in-Charge. Note : 3 runs of 2.5 sqmm copper conductor shall be measured as one unit length.

Supply and laying or fixing or passing through pipe or cable duct from meter room to the various floors of multistorey building, upto eight floor/10th floor, 1100 volt grade heavy duty cable with XLPE insulated aluminium conductor with an inner sheathing of PVC tape armoured with galvanaized steel or tape and over all PVC sheathed 16 sqmm 4 core wire including taking up/down old cable complete all as specified and directed by Engr-in-Charge.

Taking down Geyser of any capacity/type from existing position for repair /cleaning/ descaling of inner tank with descaling solution/wire brush, sand paper and refixing the same after repair complete all as specified and as directed. Note : Spares will be measured and paid separately under relevant items.

Supply and fix Heating Element 1.5 KW, 230 volts rating suitable for Geysers incl taking down old unserviceable Heating element complete all as specified and as directed.

Supply and fix Heating Element 2 KW, 230 volts rating suitable for Geysers incl taking down old unserviceable Heating element complete all as specified and as directed.

Supply and fix indicating lamp rounded type, 230 volts rating suitable for Geysers incl taking down old unserviceable indicator lamp complete all as specified and as directed.

Supply and fix pressure release valve dead weight type suitable for Geysers incl taking down old unserviceable pressure release valve complete all as specified and as directed.

Supply and fix thermostate switch with thermal setting 40˚ C to 90˚ C and relay 230 volts suitable for Geysers incl taking down old unserviceable thermostate complete all as specified and as directed.

M&L for taking out unserviceable water tank (inner shell) of water heater of any capacity and brazing to leaking portion or patching work as required with using copper plate 1.5mm thick including shaping to original size complete all as specified and and as directed. Note : Unserviceable geysers to be deposited to E/M store yard.

M&L for wall fastners of size 100 mm long 8mm dia with double washers incl grouting and make good the wall surface with cement mortar (1:4) for fixing water heater after removing the existing unserviceable nuts,bolts and washers complete all as specified and as directed.

Supply and fix plug top 3 pin 16 Amps ISI marked incl taking down old unserviceable plug top complete all as specified and as directed.

Supply and fix in 3 core 2.5 sqmm round copper flexible conductor incl taking down old unserviceable wire complete all as specified and as directed.

Disconnection of electrical wire from ceiling rose and taking down the ceiling fan any capacity/type/size and make including dismantling the ceiling fan for removing of old lubricating substance from bearing/bush and applying fresh lubrication using grease for noise free smooth functioning and refixing the ceiling fan in own position with provision of hanging bush, cotter pins, nut, bolts, washers etc, connection with flexible wire and testing complete after replacement of burnt out/worn out copper winding and existing same gauge of copper wire winding/unserviceable spares as required and replacement of PVC insulated, unsheated multi stranded twin twisted copper conductor cable of size 1.5 sqmm up to 0.5 mtr long including testing the repaired ceiling fan to the entire satisfaction of Engr-in-Charge. NOTE:- Rewinding of ceiling fan and PVC wire for making connection and spares shall be measured and paid seperately under respective item.

Material and labour for rewinding of ceiling fan 1200/1400 MM sweep by dismantling of fan motor, cutting and removing of burnt windings, cleaning the motor slots, rewinding the motor with supper enameled copper wire of appropriate gauge, provision of insulation paper, applying of varnish, heating / baking the motor to acheive the proper insulation resistance washing and removing of old lubricating substance from bearing/bush using Kerosine oil, painting, carrying out fresh lubrication using grease and to make free for smooth functioning complete all as specified and directed by Engr-in-Charge.

Material and labour for carrying out re metalling in worn out shaft, cutting and polishing to make the shaft suitable for fixing of new ball bearing and fixing ball bearing in replacement of bushing system in ceiling fan and assembling the same and testing to entire satifaction of Engineer in change Note : Bearing shall be measured and paid seperately.

Supply only ball bearing of any size and type, suitable for any type/make/size of ceiling fan complete all as specified and directed by Engr-in-Charge.

Supply and fix in repairs capacitor of capacity 2.5 MFD, 220 volt ISI marked complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs PVC insulated, unsheathed multistranded twin twisted copper flexible cable of size 1.5 Sqmm complete all as specified and directed by Engr-in-Charge.

Supply only suitable size of bush for ceiling fan of any type/size complete all as

Supply and fixing in repairs PVC connector 4 way 6 Amps with connection screws, nuts, etc complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs PVC clamps with fixing screws for holding capacitor of any type and size complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs Alloy Steel Heavy Duty "S" or "D"-Hook Hanger with double Fasteners M10 x 75mm for Hanging Ceiling fan sted wornout hook complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair heavy duty Steel & rubber fan to ceiling hook attachment clamp with fan rod nut bolt & locking pins complete set complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs ceiling fan blade of 1200/1400mm size of existing make including proper painting matching with existing ceiling fan complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs PVC canopy suitable for ceiling fan of any type/make for both end of down rod including fixing screws complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs down rod 1'/1.5' suitable for ceiling fan of any type/make for both end of down rod including fixing screws complete all as specified and directed by Engr-in-Charge.

Cleaning of ceiling fan assembly of any type/size and carrying out two coat of spray painting with first quality synthetic enamelled paint of approved colour, including writing of MES number in black paint complete all as specified and directed by Engr-in-Charge.

Disconnection of electrical wire from ceiling rose and taking down the exhaust fan any capacity/type/size and make including dismantling the exhaust fan for removing of old lubricating substance from bearing/bush and applying fresh lubrication using grease for noise free smooth functioning and refixing the exhaust fan in own position with provision of hanging bush, cotter pins, nut, bolts, washers etc, connection with flexible wire and testing complete after replacement of burnt out/worn out copper winding and existing same gauge of copper wire winding/unserviceable spares as required and replacement of PVC insulated, unsheated multi stranded twin twisted copper conductor cable of size 1.5 sqmm up to 0.5 mtr long including testing the repaired exhaust fan to the entire satisfaction of Engr-in-Charge. NOTE:- Rewinding of exhaust fan and PVC wire for making connection and spares shall be measured and paid seperately under respective item.

Supply and fixing in repairs electronic fan regulator stepped type flush type 120 W suitable for existing ceiling fans fixed on phenolic laminated sheet etc. as reqd complete all as specified and directed by Engr-in-Charge.

Material and labour for rewinding of exhaust fan of 300 mm sweep by dismantling of fan motor, cutting and removing of burnt windings, cleaning the motor slots, rewinding the motor with supper enameled copper wire of appropriate gauge, provision of insulation paper, applying of varnish, heating / baking the motor to acheive the proper insulation resistance washing and removing of old lubricating substance from bearing/bush using Kerosine oil, painting ,carrying out fresh lubrication using grease and to make free for smooth functioning complete all as specified and directed by Engr-in-Charge.

All as per srl item No 92 here-in-before but for 380mm sweep complete all as specified and directed by Engr-in-Charge.

All as per srl item No 92 here-in-before but for 450mm sweep complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs louver shutter made of MS sheet metal 1.2 mm thick for round/square base and 0.8 mm thick for flaps, comprising of mounting legs frames made of MS flat strips of size 25mmx3mm including heavy duty rust proof passivated bolts of size 50 mm long 8 mm dia to be fixed on wall fater driling, and duly painted by two coat of synthatic enamelled paint (spray painting) over a coat of primer for exhust fan up to 300/380/450 mm sweep complete all as specified and directed by Engr-in-Charge.

M&L for fan motor suitable for PVC body exhaust fan upto 250 mm sweep and RPM match with existing incl taking down old motor and fixing of new with proper allignment and refixing the same using necessary mounting screws and accessories without any vibrations and noise to the satisfaction of Engr-in-Charge.

Supply and fixing capacitor 230 volt AC 50 HZ 4.0 MFD, 220 volt ISI marked complete all as specified and directed by Engr-in-Charge.

Supply and fix PCB (Printed Circuit Board) for BLDC fan of any make/type and size (1200/1400) mm sweep as existing to obtain the specified and satisfactory RPM as per menufactures specification complete all as specified and directed by Engr-in-Charge. Note : Ceiling fan before fix at site the RPM shall be checked and match as per manufactures specification till entire satification of Engr in charge

3 VOLT ELECTRICALS ENTERPRISES (BID ID -3486679)

GOLDEN EYE BUILDERS (BID ID -3479325)

Kuriako Mathai and company (BID ID -3481018)