Annual Plan-Annual plan - own fund - Electrification of newly built Toilet block constructed under LAC-ADS-at Central Market and providing pump set-General Electrical Work

SITC pump set and Electrification

OD325240/2025-2026:Supply and installation of dust and vermin proof single phase energy meter box for fixing smart energy meter and accessories as required on wall, making good the damages color washing etc as required (Model GSMB 4537 450x375x200 mm Sintex make or equivalent ) to accommodate 32 fuse, Neutral link etc

2.3.2:Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way, Double door

2.10.3:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, ""C"" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double pole

2.10.1:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, ""C"" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

2.14.2:Supplying and fixing following rating, double pole, (single phase and neutral),240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps

2.14.1:Supplying and fixing following rating, double pole, (single phase and neutral),240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 25 amps

2.12.1:Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.11:Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

90.2.1.1:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single Control light point with 6A, plate ceiling rose - Short point

90.2.1.3:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single control light point without ceiling rose - Short point

OD323786/2025-2026:Supply, Conveyance, Installation and testing of robust & reliable LED Bulk head with IP65 Protection and IK08 impact resistance suitable for wall mounting application including giving connection as required. (Make: Philips (Model: WT140W LED7S CW PSU S1 PC-9405) or any other equivalent make

1.58:Supplying and fixing PVC batten/ angle holder including connection etc. as required.

OD325391/2025-2026:Suply and providing 200 mm plastic shades and 7/9 W LED Lamp230 V(Wipro or equivalent) on existing holder as required

90.6.10.1:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required20 mm

90.6.10.2:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required25 mm

90.6.10.3:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required32 mm

1.17.21:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 4 sq. mm

90.6.6.2:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.2.50 sq mm

OD323787/2025-2026:Supply and fixing 25mm (1") GI flange along with bolt and nuts in the existing suction/delivery pipe line using required leak proofing materials etc. as required

OD323782/2025-2026:Supply and fixing clamp made with 50x6mm GI Flat for hanging delivery pipe of submersible motor pump set in existing GI pipe above the open well

OD323785/2025-2026:Supply and fixing 50mm B class GI pipe as support for hanging submersible motor pump set in open well

OD323793/2025-2026:Supply and providing suitable stranded Steel rope for hanging the submersible motor pump set

OD323776/2025-2026:Supply and fixing 25mm 80 Sch ASTM Threaded Adaptor Male

OD323779/2025-2026:Supply and fixing 25mm 80 Sch ASTM Tee

OD323783/2025-2026:Supply and fixing 25mm 80Sch ASTM bend

OD323777/2025-2026:Supply, laying and fitting 25 mm 80 Sch ASTM pipe with suitable type solvent etc. as required at site,

OD323775/2025-2026:Supply and fixing 25mm ASTM socket 80 Sch

OD323784/2025-2026:Supply and fixing 25mm GM Ball valve in the existing ASTM pipe Zoloto make or equivalent

5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

OD323778/2025-2026:Supply and providing 2x25x3 mm G I strip as test joint on the existing watering pipe of earthing including bending and giving connections

OD323781/2025-2026:Providing and fixing 25mmx3mm GI Strip on surface or in recess for connections etc as required

OD323794/2025-2026:Supply and providing 25x6mm brass nut and bolt etc. as required.

90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)

90.16.2.1:Supply and laying of the following sizes of B class GI pipe laid 0.6 m below ground level including excavating trench of suitable size and refilling etc, as required.15.mm dia. G.I pipe ( medium class)

90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)

OD323789/2025-2026:Supply and providing 32A 2 way neutral link on existing meter board using suitable nut bolt etc. as required.

OD323791/2025-2026:Supply and providing 32A HRC fuse holder with suitable nut, bolt etc. with 2-25A HRC fuse link

1.21.4:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.40 mm

OD323780/2025-2026:Charges for procurement, preparation and submission of application for availing single/three phase KSEB service connection with necessary Sketch, Test and completion report, etc. including necessary liaison work as required.

OD323798/2025-2026:Supply and providing Anchor bolt GI 3/8"x6" as required

OD323796/2025-2026:Supply and providing Brass nut bolt 3/8'x2.5mm as required

OD323797/2025-2026:Supply and proving nylon rope 12 mm as required

OD323799/2025-2026:Supply and providing Brass, Chrome Plated motor nipple 1"x6" as required the adhesive materials and solvents

OD323801/2025-2026:Supply and providing Non return valve 25mm with adhesive tape, solvent, ITC etc (Make Zoloto Zoloto Cast Iron Non Return Valve )

OD330628/2025-2026:Supply and provide 40 to 25 mm reducer ASTM sch80 with suitable solvents and adhesives

OD324331/2025-2026:Supply and providing canopy made of Aluminium composite panel of required thickness including cutting and fabrication

90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

90.3.17.2:Supply, conveyance and erection of the following sizes of 'B' class GI pipe in single section for post top lantern of all types on concrete base (excluding charges for concrete base and excavation) and painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer etc. as required.40 mm dia GI pipe

OD326656/2025-2026:Supply installation testing and commissioning of single phase 0.5 HP open well submersible motor pump set (EKKI DECCAN DH05 or equivalent) , 2880 RPM motor winding copper with head range of 10 To 17 Mtr and discharge of 50-125 LPM, Delivery size 25mm using suitable type tools plants including giving necessary connections as required

90.10.3.15:Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )32A DP switch with indicator

1.27.1:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm)

14.10:Providing and laying in position reinforced cement concrete 1 :2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required (excluding reinforcement).