Repair to Leakage/Seepage, Joinery, Flooring, Ceiling, Sanitary Fitting, Plastering, Painting, Approach Path, Drain and Internal Electrification of Md accn at Ghanghora under AGE B/R-I of GE Dehradun.

Amount

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles.

M&L brick work with sub class 'B' brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed.

All as per Item No. 02 above but except brick complete all as specified and as directed. Note : Old serviceable bricks obtained from demolition shall be reused. The rate quoted against this item is inclusive of necessary cleaning and stacking of bricks before incorporation in the work.

M&L brick work with sub class 'B' brick straight or curved on plan to any radius built in cement mortar 1:4 as in half brick thick wall complete all as specified and as directed.

Taking down cement plaster from brick, concrete or stone wall etc including racking out joints, hacking for key and scrubbing down with water etc. complete all as specified

M & L 15 mm thick rendering in cement mortar 1:6 on brick work or concrete surface, surface finished even and fair complete all as specified and as directed. (Note : Rendering will be done in two layer. 1st layer will be 10-12 mm thick and 2nd layer will be 3-5 mm thick.)

M & L 15 mm thick rendering in cement mortar 1:6 on brick work or concrete surface, surface finished even and fair complete all as specified and directed.(Note: Rendering should be carried out in two layers i.e. Ist layer 10-12mm and 2nd layer 3-5mm).

M & L 15 mm thick rendering on brick work or concrete surface of walls, chajja, facia etc. in cement mortar 1:4, using water proofing compound (if required) surface finished even and fair complete all as specified and as directed. (Note : Rendering will be done in two layer. 1st layer will be 10-12 mm thick and 2nd layer will be 3-5 mm thick. Water proofing compound will be measured and paid separately)

M & L 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4 mixed(if ordered) with water proofing compound, surface finished even and smooth complete all as specified and directed. (Note : Water proofing compound shall be measured and paid separately as supply only and Rendering should be carried out in two layers i.e. Ist layer 10-12mm and 2nd layer 3-5mm).

M&L for preparation of wall and applying exterior grade wall care putty 2 to 3mm thick to make the surface smooth as specified and directed by Engr-in-Charge. Make : Berger/Asian/JK/Birla

M&L for preparation of wall and applying interior grade wall care putty 2 to 3mm thick to make the surface smooth as specified and directed by Engr-in-Charge. Make : Berger/Asian/JK/Birla

M&L for preparation of old decorated surfaces of walls (plastered) by brooming down with core wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and finally clean with sand paper complete all as specified and as directed.

M&L for complete removal of existing treatment from wall upto plaster surface by electric sand paper grinder, washing, rubbing down and stopping of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces finally rubbed and smooth with sand paper complete all as specified and as directed.

M&L preparation of old decorated surfaces of ceiling (Plastered) by brooming down or sand paper, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots.complete all as specified and as directed

M&L one coat of oil bound distemper in any tint on already prepared old surfaces of walls complete all as specified and as directed by Engr-in-Charge.

M&L two coat oil bound distemper over a coat of suitable primer of any tint on new surfaces of walls on already prepared surfaces complete all as specified and as directed by Engr-in-Charge.

M&L two coat of cement base paint on external new surfaces of walls over a coat of priemer on already prepared surfaces complete all as specified and as directed by Engr-in-Charge.

M&L one coat of cement base paint on external wall surfaces already prepared old wall surfaces complete all as specified and as directed directed by Egnr-in-Charge.

M&L for preparation of old decorated surfaces of walls, pillasters, cornices, AC Sheet etc. by brooming down with steel wire brushing and scrapping down old moss, efflorecent salt and trading oil greasy spot and applying one coat of exterior emulsion paint complete all as specified & directed .

M&L for one coat of white wash on already prepared old surfaces of wall complete all as specified & directed .

M&L for one coat of white wash on ceiling on already prepared surfaces complete all as specified & directed .

M&L for 10 mm thick rendering in cement mortar (1:3) on concrete surfaces of ceiling etc and finishing the surface even and fair complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing tiles and rubbish off the premises complete all as specified and directed.

M&L for non skid ceramic coloured tiles of size 300 x 300x 6 to 7mm thick in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed.

M&L non-skid / mat finish designed coloured joint free ceramic tiles of size not less than 400 mm x 400 mm x 7-8 mm thick in floor, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 complete all as specified and as directed.

All as per item No 25 above but as in skirting etc including 10 mm thick rendering in cement mortar 1:4, complete all as specified and as directed.

M&L for glazed ceramic coloured tiles of size 300 x 200 x 6 to 7mm thick as in vertical surfaces i.e. skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface with & including rendering 10 mm thick in cement mortar 1:4 finished rough to fix tiles complete all as specified and directed.

M&L for vitrified ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

All as per item No 28 above but as in skirting etc including 10 mm thick rendering in cement mortar 1:4, complete all as specified and as directed.

M & L PCC 1:2:4 type B-0 using 12.50 mm graded stone aggregate as in leveling course to floors etc complete all as specified and as directed.

M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in benching to drain, holdfast, padding to roof/chhajja, coping, bed block etc. and the like edge slightly rounded or chamfered including necessary use and waste of form work and demolition of existing old cement concrete (un-reinforced) complete all as specified and as directed.

M&L 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar work/places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement and demolition of existing old cement concrete of plinth protection complete all as specified and as directed.

M & L PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling, mass concrete, sub base or leveling course of floor etc. including demolition of existing old cement concrete (un-reinforced) complete all as specified and as directed.

Demolition of cement concrete unreinforced in ground floors and pavings n.exc. 15 cm thickness(below or above ground level) complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in surface channels and drains including necessary form work/ moulds complete all as specified and directed.

M&L for extra for forming fair finished drains or channels 30 cm inner girth in cement concrete, using extra cement complete all as specified and directed.

M&L for 40 mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in floors finishing the surface even and smooth with using extra cement complete all as specified and directed.

Demolition of stone slabs and tiles of any description and thickness as in floor, apron etc. laid, bedded and pointed in any mortar complete all as specified and directed.

M&L 18 to 20 mm thick machine cut polished granite 1st quality "black or coloured" stone slab over kitchen platform and similar places over and including 15mm thick screed bed in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match with existing surface including grinding and moulding of exposed edges of granite complete all as specified and as directed.

M&L for grinding and polishing to old kota/ marble stone flooring, udaipur green slab flooring, etc complete all as specified.

M&L heavy duty endura ceramic coloured tiles 10 mm thick dark shade (square/rectangular) polished,area of each tiles not exceeding 0.36 sqm, in floor etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for prepolished chequered cement concrete tiles 30cmx30cmx20-22mm thick, set jointed and pointed in neat cement slurry with grey cement and pigment over and including 20 mm thick screed bedding layer (1:6) complete all as specified. Make NTC/Crystal/Tulip.

Taking down and re-fixing the existing shutter in same opening after & including necessary easing/repair etc. exc. 1 Sqm but n. exc. 2 Sqm each complete all as specified and as directed.

Taking down shutter of any description, n. exc. 1 Sqm each complete all as specified and as directed.

Taking down shutter of any description, exc. 1 Sqm but n. exc. 2 Sqm each complete all as specified and as directed.

Taking down chowkhats or frames with shutter n. exc 1.5 sqm each without taking off shutter from the frame complete all as specified and as directed.

Taking down chowkhats or frames with shutter exc. 1.5 Sqm but not exceeding 4 Sqm each without taking off shutter from the frame complete all as specified and as directed.

S & F mild steel work as in holdfast, hooks for hanging fans and similar small articles conforming to Fe- 290 Gde-E-165 including necessary welding or fixing nuts and bolts complete all as specified and as directed.

S & F second class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

S & F 30mm thick second class hardwood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) and as directed.

M&L for 30 mm thick, factory made flush shutters, solid core construction, with block board core and plywood face, pannels, commercial type on both sides including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified and directed.

S & F 30 mm thick second class hardwood glazed and Skelton factory made window/ventilator shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass / gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24(b) and as directed

All as per item No 52 above but 30 mm thick shutter without sash bar for window/ventilator shutter all as specified in SSR Part-I clause 8.24 b.

S&F pre laminated Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam single piece extruded pvc profile and edgs will be painted to match with prelam sheet , PVC sheet are to be reinforced with 19x19mm MS square tube EPDM rubber gasket weather seal shall be provided through out the frame. The profile shall be mitre cut at two corners and joint by insrting 2 nos of 150mm long backets of 15mmx15mm MS square tube inside the 19mmx19mm MS square tube and suitably screwed and fixing in opening as per specification & drawing.

S&F factory made pre laminated PVC flush type shutter of 18mm (+ 0.5) thickness consisting of panel of 18mm (+0.7mm) thick celuka ply, of denistity 600 Kg per cum manufactured by ISO-9000 certified company, using for shutter celuka ply 18mm thick and fixed with frame, all four edges of shutters, using 13/6 size self tapping steel screws. The thickness of shutter is edges painted by matching colour of PVC lining of prelam coloured PVC sheet using etc, complete as per manufactue specification.

S&F factory made 100% solid wood plastic composite (WPC) door frame of size 125 x 63 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof termite proof fire retardant and having good screw holding capacity all as specification and drawing complete all as specified and directed by Engr-in-Charge.

S&F 30 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side palin with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified and as directed.

Dismantling wrought iron work of any description at any suitiuation complete as all directed and specified.

Dismantling mild steel sheets of any description of any suitiuation complete all as specifed and directed.

M&L mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, ball bearing and other similar works etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with either hooks and hinges or steel hanging door complete

S&F mild steel, plain, black sheet 0.80 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitered angles, etc. as required complete all as specified and directed.

S&F in repair steel windows factory made with side hung shutters including box type hinges with steel handle, and 125 mm MS tower bolt 2 Nos in each leaf, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F in repair steel windows factory made with side hung shutters including box type hinges with steel handle, and 125 mm MS tower bolt 2 Nos in each leaf, complete without glazing bars, dovetailed or welded complete all as specified and directed.

S&F in repair Steel ventilator factory made with top hung shutter including box type hinges, steel peg stay, with glazing barsm tower bolts, handle etc dovetailed or welded complete all as specified and directed.

S&F stainless steel wire with 8% nickel cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete .

M&L for 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

S&F in repair 0.56 mm dia stainless steel wire cloth with average width of aperature 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

M&L in repair 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

S&F mild steel framed work for such as grills, grating etc with end of bars shouldered and/ or riveted forged into spikes, framed guard bars barred iron door, railings and similar work complete conforming to Fe-290 Gde E 165 complete all as specified & directed..

S&F in repair 18mm thick prelaminated one side and plain white colour other side PVC Sheet for cub board including frame complete all as per specifications & directed by Engr-in-Charge. Make : Rajshree, Polyline, ECHON/Kumar Tech.

All as per item No 70 above but plain white PVC sheet for cup board self, partition etc complete all as specified

S&F magnet catcher for cub board with brass body and striking plate including letting in and fixed complete all as specified and as directed.

S&F continious (PIANO) hinges, mild steel, bright finish or electrogalvanised. 30 mm width of flaps (when open) complete all as specified and as directed all as specified as directed.

S&F 200 mm long, solid in one piece stainless steel barrel tower bolts 10mm dia shoot grade 304 complete all as specified and as directed by Engr-in-charge.

S&F 150 mm long, solid in one piece stainless steel barrel tower bolts 10mm dia shoot grade 304 complete all as specified and as directed by Engr-in-charge.

S & F with screws/welded to frame butt hinges, 75 mm size medium weight, stainless steel complete.

S & F with screws/welded to frame butt hinges, 100 mm size medium weight, stainless steel complete.

S&F 150mm size stainless steel handles all as directed grade 304 complete all as specified and directed.

S&F 125mm size stainless steel handles, all as directed grade 304 complete all as specified and directed.

S&F Hasp and staple 75mm safety type, stainless steel 304 grade with hinge pin including bolt to hinge plate and fixed with screws

S & F 300 mm stainless steel sliding door bolt grade 204 with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete as specified and directed.

S&F 300 mm long mild steel sliding door bolt, bolt type stove enamelled blacks with bright bolt not less than, 12mm dia with an including 6 bolts and nuts four on bolt plate and two on staple plate ISI marked complete all as specified.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm.

S&F 300 mm, mild steel ordinary rat tail rod pattern spring including roller and roller plate fixed with screw/ welding complete complete all as directed.

M & L applying two coats of indigo floor paint on concrete surfaces of any description over 10 cm width or girth over a coat of suitable primer including preparation of surfaces complete as specified and directed.

M&L for preparation of new or previously untreated wooden surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified & directed.

M&L for preparation of old painted surfaces of wood or wood based materials of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

S&F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws including dismantling of old sheets of any description complete all as specified and directed by the Engr-in-Charge.

S&F Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws including dismantling of old sheets of any description complete all as specified and directed by the Engr-in-Charge.

M&L for 6 mm thick asbestos cement corrugated or semi corrugated sheets in roof fixed with 'L' type or J type or cranked hook bolts including dismantling of old AC sheets of any description complete all as specified and as directed.

S & F mild steel work as in main and cross beam, hip and jack rafters, purlins etc. fixed with angle cleat or other connecting plate complete confirming to Fe – 410-O or Fe – 310-O including dismantling old section complete all as specified and as directed.

M&L for preparation of new or previously untreated steel surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

M&L for preparation of old steel surfaces of any description exceeding 10 cm width/ girth and applying one coat of synthetic ename paint on old steel surfaces complete all as specified.

S&F in repairs stainless steel 1mm thick drapery rod with wooden finish, decorative, including brackets, decorative finials at both ends & curtain rings 8 Nos per RM (Minimum) complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connection including cleaning for refixing or removing from site complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connection including cleaning for refixing or removing from site complete all as specified and directed.

S&F in repair stainless steel decorative brackets/ decorative finals for curtain rods of wooden finish complete.

Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Fixing only 15 mm bore old steel water tubing & connection in new or old position fixed to wall, ceiling or laid in floors including necessary cutting & making of new threads for fixing of new fittings such as elbows, tees, sockets, union, , reducer, etc as required including cleaning for re-fixing complete.

Fixing only 20 mm bore old steel water tubing & connection in new or old position fixed to wall, ceiling or laid in floors including necessary cutting & making of new threads for fixing of new fittings such as elbows, tees, sockets, union, , reducer, etc as required including cleaning for re-fixing complete.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20 cm girth as in brick wall complete all as specified and directed.

S&F in repair PVC connection 15 mm dia 450 mm long with brass fly nut at both ends complete all as specified and as directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including cantilever brackets of suitable angle iron, stainless steel waste coupling , superior quality PVC waste pipe and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed. Make : Jaquar/ Supreme/ Hindware.

S&Fin repairs sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 495mm x420mm bowl size 410mm x 330mm x 160mm, including PVC waste pipe 40 mm dia complete all as specified and directed.

S & F in repairs, vitreous china wash down water closet pedestal pattern white,(excluding flushing cistern and flush pipe) with CI ‘P’ or ‘S’ trap including connection to trap complete including making good to floor complete. Make : Hindware/ Parryware/Jaquar.

S & F in repair vitreous china squatting pan “ORISSA PATERN” of size 580 mm x 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including CI trap spun casted 60 cm long, connection to trap with expoxy mortar and making good to floor complete all as specified and as directed. Make: Hindware/Parryware/Jaquar.

S&F in repair plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified. Make :Hindware/Parryware/Jaquar.

S & F in repair 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including bracket with 32 mm dia PVC pipe/ bend 600 mm long complete all as specified and as directed. Make: Hindware/Parryware/Jaquar.

S & F in repair 75 mm bore UPVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring, fixed on wall complete all as specified and as directed.

S & F in repair 110 mm bore UPVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring, fixed on wall complete all as specified and as directed.

S & F in repair 75 mm bore UPVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring joints laid in trenches/ floors complete all as specified and as directed.

S & F in repair 110 mm bore UPVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring joints laid in trenches/ floors complete all as specified and as directed.

S & F in repair 150 mm bore UPVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring joints laid in trenches/ floors complete all as specified and as directed.

S & F in repair 75 mm bore UPVC (SWR) bend with oval access door,'T'socket reducer etc complete all as specified and as directed.

S & F in repair 110 mm bore UPVC (SWR) bend with oval access door,'T'socket reducer etc complete all as specified and as directed.

S & F in repairs PVC water tank cover suitable for 500 litre water storage tank complete all as specified.

S & F in repair vitreous china wash hand basin white, oval type counter top of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste fittings and 32 mm dia PVC waste pipe etc. complete as specified and directed. Make : Hindware/Parryware/Jaquar.

S & F in repair vitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste fittings and 32 mm dia PVC waste pipe etc complete as specified and directed. Make : Hindware/Parryware/Jaquar.

S&F in repair pillar taps, brass, with capston heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed. Make : Jaguar/Cat part No. KUP-35001PM/Hindware Cat Part No:F370001/Parryware Cat Pat No.T4302A2

S&F in repair CP brass 3 in 1 hot & cold 15 mm dia wall mixer for mixing hot and cold water with telephonic shower provn with connecting legs &flanges complete all as specified and directed. Make : Jaquar Model No CON 281KN, HSH 1929 & OHS 1989/Marc ES547A & ES 531 (Telehone shower) ES 549 (shower) ES 536 (Shower).

S&F in repair 15mm dia brass chromium plated centre hole basin mixer with accessories in wash basin for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed. Make : Jaguar CAT Part No SOL-6001B/Hindware CAT Part No F450009/Parryware CAT Part No G0665A1

S&F in repair brass chromium plated ovehead shower with shower arm complete all as specified and directed. Make : - Parryware Cat Part No T9985A1(Shower) & T-9999A1(Arm)/Hindware Cat Part No F160054 (Shower) & F190016(Arm)/Jaquar Cat Part No OHS 1999 (Shower) & SHA479L300 (Arm).

S & F in repair 15 mm dia bore chromium plated concealed stop cock, complete as specified and directed.

S&F in repair 15 mm bore Angle cock/stop valves, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed. Make : - JAGUAR Cat Part No FON-40053/Hindware Cat Part No F160017/Prayag Cat No 9410

S&F in repair 15mm bore Bib taps short body, cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. Make : - JAGUAR CAT Part No ALI-85037/Hindweare CAT Part No F-370004/Prayag CAT Part No S9906

S & F in repair 15 mm bore two way bib taps, chromium plated cast copper alloy , screwed down, screwed for iron pipe or for brass ferrule, complete as specified and directed. Make : Parryware Cat Part No. G0334A1 or equivalent in Jaquar/Hindweare

S & F in repair 15 mm bore two way Angle cock, chromium plated cast copper alloy , screwed down, screwed for iron pipe or for brass ferrule, complete as specified and directed. Make : Parryware Cat No.G4643A1 or equivalent in Jaquar/Hindweare.

S&F in repair CP Health Faucet with 1.20 mtr metalic expandable tube & hook complete all as specified and directed. Make : Jaquar Cat No.ALE-ESS-585/Parryware Cat No. T9941A1.

S&F in repair soap dish, brass, chromium plated,100X100X60mm, fixed to wall with rawl plugs and chromium plated screws complete all as specified and directed. Make : Jaquar Cat No CAN-1131N or equvilant in Parryware /Hindweare.

S&F in repair sheet glass shelf assembly consisting of 5.5mm thicksheet glassshelf with chromium plated guard and railing size 500X125mm with brass bracket complete all as specified and directed. Make : Jaquar Cat No.AKP-35771P or equvilant in Parryware /Hindweare.

S&F in repair plate rack 200mm and size 90 x 75 cm made out off 1.00 mm thick stainless steel complete all as specified and as directed.SS Grade 304.

S & F in repair PTMTgrating square 150 mm size complete all as specified. Make : Prayag Cat No. 115 or equivalent as approved by GE.

S&F in repair Stainless steel cockroach Trap square of size (101X101 mm) Make : Prayag Cat No. FT 21 or equivalent as approved by GE.

S&F in repair Stainless steel cockroach Trap square of size (101X101 mm) Make : Prayag Cat No. FT 23 or equivalent as approved by GE.

S&F in repair looking mirror of size 600 x 450 mm or next higher size 5 mm thick mounted on decorative type PVC frame fixed with royal plugs complete all as specified . Make : Prayag or equivalent as approved by GE.

S & F in repair 20 mm dia brass chromium plated towel rack of 3 sets type 60cm long between flanges including pair of fixing brackets complete all as specified and directed. Make: Jaquar Cat Part No AKP-35781PS/CAN-1181FHS` or equivalent of Hindweare/ Perrywere.

S&F in repairs brass chromium plated towel ring complete all as specified. Make : Jaquar Cat No.AQN-7721 or equivalent of Hindweare/ Perrywere.

S&F in repair brass chromium plated toilet paper holder fixed to wall with brass chromium plated screws Make : Jaquar Cat No.ACN-1151N or equivalent of Hindweare/ Perrywere.

M&L cleaning of water storage tank capacity exceeding 250 litres but not exceeding 500 litremechanically using pressure pump with disinfectant chemical including cleaning & removing all scale & dirt etc from existing tanks, mouths of circulating pipes and outer surface of any description & washing down down including writing CA No. on water tank with date of cleaning with synthetic enamel paint complete all as specified and as directed of following size:-

M&L cleaning of water storage tank capacity exceeding 500 litres but not exceeding 1000 litremechanically using pressure pump with disinfectant chemical including cleaning & removing all scale & dirt etc from existing tanks, mouths of circulating pipes and outer surface of any description & washing down down including writing CA No. on water tank with date of cleaning with synthetic enamel paint complete all as specified and as directed of following size:-

S&F rotational moulded polyethylene 500 ltr capacity water storage tanks (cylindrical vertical with closed top) , ISI marked hoisted and fixed in positionas specified in SSR Part-I including 20mm dia PTMT ball valve 20mm dia GI medium grade over flow pipe 1.5 mtr length (approx), 25mm dia GI wash out pipe plugged at one end complete all as specified and directed including dismantling of old tank complete all as specified and directed of following size:-

S&F rotational moulded polyethylene 1000 ltr capacity water storage tanks (cylindrical vertical with closed top) , ISI marked hoisted and fixed in positionas specified in SSR Part-I including 20mm dia PTMT ball valve 20mm dia GI medium grade over flow pipe 1.5 mtr length (approx), 25mm dia GI wash out pipe plugged at one end complete all as specified and directed including dismantling of old tank complete all as specified and directed of following size:-

S&F in repairs 75mm dia cast iron centrifugally cast (spun) floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

S & F in repairs ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 15 mm bore size (Minimum weight 142 gms) complete all as specified and as directed.

S & F in repairs 20 mm bore gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S & F in repairs ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 20 mm bore size (Minimum weight 210 gms) complete all as specified and as directed.

S&F in repair of Aluminium body door cill of length not less than 1 mtr at bottom part of door to stop entry of insect inside the room complete all as specified and as directed.

S&F in repair corner shelf 200 mm size of glass with ss railing complete all as specified.

S&F powder coated aluminium ventilator/window 38 mm blade pitch and frame made with aluminium section with and u channel including glass (as specified below), Aluminium sections shall be of size as given below including taking down old window/ventilaor : - Frame: 44.5 x 44.5 mm x 1.80 mm thick Top/bottom rail 90 x 44.5 mm x 1.80 mm thick Side style/rails of shutter - 44.5 x 44.5 mm x 1.80 mm thick Glass: 5 mm thick frosted/plain glass fixed with rubber gasket with aluminium beading. Aluminium fitting such as peg stay , aluminium hinges, aluminium handle 100 mm long, aluminium tower bolt 100 mm long and making good of wall surface with matching to existing surface complete all as specified and directed.

S&F in repairs tiled false ceiling of Designer tile Ivory painted (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) in true horizental level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grms, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and croos 'T' of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600mm and secondary cross "T" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable wire of 4mm dia with galvanised butterfly level clips, spaced at 1200mm c/c along main 'T', bottom exposed width of 15mm of all 'T'' sections of 4mm dia GI wire shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5mm width, all complete at all heights as per direction of Engineer-in-Charge.

S&F in repair powder coated aluminium anodised door with frame with u channel, shutter, following accessories and glazing with 4.8 mm thick retro reflected glass, rubber gasket, aluminium glazing clips, mortice lock, aluminium stopper cleat, iron mongary, section of aluminium door shall be of following sizes: - Frame: 100x44x1.20 mm thick with rawl plug ,Middle lock rail: 85x44x1.20 mm thick, Bottom rail : 150x44x1.20mm thick, Top rail : 85x44x1.20 mm thick, style : 75x44x1.20 mm thick, glazing bead : 0.70 mm thick, Aluminium handle 'D' type : 150 mm, Aluminium tower bolt 9.9 mm dia shoot 200 mm long, Mortice lock: 100 mm 4 lever, Aluminium stopper cleat, aluminium hinges 100 mm long. Note: PCC shall be measured and paid seperately and making good of wall surface with matching to existing surface complete all as specified and directed.

S&F in repair powder coated aluminium anodised partition with frame, (fixed type) shutter, and glazing with 4.8 mm thick glass, glass fixed with rubber gaskit with alu glazing clips section of alu door shall be of following sizesips, iron mongary, section of aluminium partition shall be of following sizes: Frame size of verticle section: 100x44x1.20 mm thick with rawl plug and horizontal section 75x44x1.20 and size of glazing panel should not be grater than 1100mmx450mm and soild panel should not be grater than 1100mmx1100mm complete all as specified and directed.

M&L for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F Aluminium (Die Cast body) Door closer hydraulically regulated designation No 1 universal type suitable for door shutters up to 851 mm to 1000mm in width and of weight between 61 to 80 kg and fixed complete all as specified & directed.

S&F mortice lock 100 mm size vertical type, 2 lever brass body and fixed with screws all as specified and directed.

M&L 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone agg as in sub base complete all as specified and as directed.

M&L for sand filling under floors or in foundations including watering and consolidatioin complete all as specified & directed.

M&L machine pressed precast concrete interlocking paver blocks any shape and size conforming to IS 15658-2006, 60mm thick, M-35 grade with grey cement and no pigment, laid in any pattern as approved over filled sand complete all as specified and directed. (Sand filling bed shall be measured separately).

Supply, fixing, laying & testing 25 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors in repair complete all as specified and directed.

S&F in repair CP bathing spout with wall flange 15 mm bore fancy type cromium plated scrwed down, screwed for iron pipe or for brasss ferrule fixed complete all as specified and directed. Make : - Jaquar SPJ-15429PM/SPJ-10429PM or equivalent kohler.

S&F in repair concealed body for joystic diverter 40 mm cartridge with button assembly (button on top) but without exposed part. Make : - Jaquar ARC-87065C or equivalent Kohler and single liver exposed part kit of diverter consisting of operating liver wall flange (with seal and button only) Make : - Jaquar OPP 15065KPM or equivalent Kohler PGD 10879 IN.

S&F in repair bottle trap of chromium plated (half of full threaded) complete all as specified and directed by Engr-in-Charge. Make : - Hindware CAT partNo F850004/Prayag Cat Part No BEF-21/12"/ALD-769L250x190 or equivalent to parryware.

M&L applying silicon based water proofing paint spray on external surfaces of walls including taking down loose plaster, filling of crack and plaster srufaces with cement mortar 1:4 complete all as specified & directed. Make : Dr. Fixit, Pidilite

M & L rendering 15mm thick in patches n exc 3 Sqm in cement mortar 1:4 mixed with water proofing compound of cement finished fair faces of brick/concrete surfaces of wall, even and fair without using extra cement . WPC will be measured and paid separately.

M & L rendering 10mm thick in patches n exc 3 Sqm in cement mortar 1:3 mixed with water proofing compound of cement finished fair faces of concrete surfaces, chajja/ facia even and fair without using extra cement complete all as specified and directed. WPC will be measured and paid separately.

Cutting around the pipe 75/100mm bore waste pipe/soil pipe including taking out plant roots up to any depth in brick masonary and rejointing in pipe joint in appoxy mortar (Asian/Berger) and making good to existing surface complete all as specified and as directed. (After the jointing pipe one week to be open for checking of leaking including scaffolding)

Removing / cutting trees vegetation, digging out roots from concrete or brick wall, filling holes on building (Block of 4 qtrs) wall / roof / chajja etc applying and making good with epoxy mortar (Asian/Berger) and applying surface treatment to match with existing specifications complete.

Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds, chajjas and similar work exc 15 cm but n exc 30 cm in width or girth; including cutting to edges, all mitres and stopped ends, etc. complete all as specified and as directed

Taking down existing projected type hings from the steel window carefully with disturbing frame and fix 50 mm long mild steel box type hinge weld to steel frame and shutter with welding and making good including touch with paint and with existing surfaces including scaffolding complete all as specified and as directed.

S&F 18 mm thick plywood coated with fibre reinforced plastic (FRP) 3mm laminated on both faces (3mm+12mm+3mm) and edges to be sealed with PVC edges binding tape for cubboard shelf and shutter complete as per specifications and as directed by the Engineer - in - charge.Make:-Jayna, Brown crust, PLUSCH

S&F Factory made solid Fibre reinforcement plastic (FRP) frame of size 50mmx20mm the rasin of chemical used in door of unsaturated polyester rasin catagory, cataylst used of methyl Ethyl Ketone peroxide (MEKP)/benzyl peroxide/acetyl aceto peroxide. Accelerator used of cobalt napthalate/cobalt octonate/N.N Dinethyl aniline. Timber suitable for manufacturing of FRP products is in accordance with IS 12896. The timber used for frames is seasoned upto the permissible moisture content as per IS-287 : 1993. Pigment compatible with unsaturated polyester resin is used to obtain the shade of finish complete all as specified and directed by the Engineer-in-Charge. Make:-Jayna, Brown crust, PLUSCH

S&F of self-adhesive bituminous sealing tape100 mm width with one side adhesive, rubber modified, consists of an aluminim foil reinforced by a polyester film and coated with a cold adesive bituminious compound for sealing of cracks and joints as in roof complete all as specified. Make: Sika, Durastrip

Cleaning of man holes of any depth and size including clearing the mouth of outlet/inlet pipes, by taking out accumulated soil, sludge etc mechanically and removal out of MD land and refixing manhole cover all as directed by Engr-in-charge.

M&L for dewatering and desludging of manholes/septic tank / soakage well of any size and depth by mechanical pumping by plugging inlet as requried, including effluent, solids and sludge out of MD land includind removing the manhole covers and reinstating to its original postion complete all as specified and directed by Engr-In Charge. (Note: A particular septic tank / soakage well which is undertaken once for cleaning and paid for shall be kept functional for entire contract period and no extra payment shall be made for repitetive cleaning if required)

Excavation in trenches in any type of soil not exceeding 1.5M wide and not exceeding 1.5M in depth for sewage line, manhole etc not exceeding 10 sqm on plan and getting out in any type of soil complete all as specified and as directed.

Demolition and breaking drain pipe (salt glazed stoneware) 150 mm Internal dia set in cement mortar complete all as specified and as directed.

Demolition and breaking drain pipe (salt glazed stoneware) 200 mm Internal dia set in cement mortar complete all as specified and as directed.

Supplying, laying, jointing and testing salt glazed stone ware drain pipe 150 mm Internal dia grade ‘A’ confirming to IS–651–1980 laid in trenches and jointed in cement mortar 1:1 including cement concrete bed to drain pipe including packing under and haunching against side of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate complete all as specified and as directed

Supplying, laying, jointing and testing salt glazed stone ware drain pipe 200 mm Internal dia grade ‘A’ confirming to IS–651–1980 laid in trenches and jointed in cement mortar 1:1 including cement concrete bed to drain pipe including packing under and haunching against side of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate complete all as specified and as directed

Returning, filling in, including spreading, watering and well ramming in layers n. exc 25 cm thick in any type of soil complete all as specified and as directed.

Removing excavated material (soil) to a distance n exc 50M and deposited where directed at a level n. exc 1.5M above the starting point complete all as specified and as directed.

M & L providing pre-cast cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in cover slab of manholes, septic tank, soak well etc set in cement mortar 1:4 with plain fair faces including chamfered weathering, throating etc including necessary use and waste of form work complete all as specified and as directed.

M & L RCC1:2:4 type B1 using 20 mm graded stone aggregate as in beam, cantilevers, lintel chajjas etc. Including demolition of existing old RCC complete all as specified and as directed.

Use and waste form work to sides and soffits of floor or roof beams, lintel, cantilevers, shelves etc. including support of fair finished surfaces complete all as specified and as directed.

M & L for RCC 1:1 ½: 3 using 20 mm graded stone aggregate as in slabs supported on wall, beam and columns in floors ,roof slabs and in shelves Including demolition of existing old RCC complete all as specified and as directed.

Use and waste form work to side & soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick, rough finished surface of concrete complete all as specified and directed.

S&F mild steel TMT bars 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips (TMT)

S & F mild steel TMT bar 8 mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips as in stirrups, spacers etc. complete all as specified and as directed.

Dismantling posts & struts; (wood, steel or R.C.C) any section, embeded in concrete, brick work masonary etc including taking out embedded portion & making good distributed ground complete all as specified and directed.

Dismantling fencing wire mesh, any type and removing from site complete all as specified and directed.

M & L 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4 surface finished even and smooth as in manholes etc complete all as specified.

M&L 65-70mm thick Pre-Cast Factory made RCC M-30 as in Cover Slab in different size of Manholes, Septic Tanks or Similar Articles with Plain Faces, all round 1mm thick plain sheet on the edge painted with bituminous paint on external surface and RCC cover should be engraved CA No and MES and set in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Reinforcement shall be Measured and Paid for separately under relevant Item(s).`

Cutting into existing manholes for connecting new drains 150mm dia making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete al as specified and directed.

Excavating in post holes (or similar holes) each n.exc 0.5cu m, getting out,returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding, 25cm watering and removing surplus soil to a distance n exc 50m and making good surface in hard/dense soil complete all as specified and as directed by the Engr-in-Charge.

S&F mild steel work as in wind ties for roof including securing bolts, post and strut in fencing including cutting tops to shape as directed drilling holes, notching for wire etc. flat iron fillets for securing wire mesh, 100 mm dia MS round bars including all necessary drilling and bolting and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 15cm but not.exc 22.5 cm long,diameter of neck n exc12 mm complete all as specified and as directed.

Supply only Chain link MS galvanised fencing any size or type weight exc 4 Kg per square metre as approved by Engineer-in-Charge.

Fixing only Chain link fencing including line wires, any mesh size and type to any type of standards rails straining bolts etc including provision of binding wire any size or type weight exc 4 kg per square metre complete all as specified and as directed.

Taking down carefully copper/Aluminum point wiring (light, fan socket and power) complete including switches, ceiling rose lamp holder and regulator etc and removing from site and making good disturbed surfaces of walls/floors etc complete all as specified and directed by Eng-in-charge.

M&L for point wiring with 1.5 Sqmm. (nominal area) FRLS, single core PVC insulated 1100 Volts, grade multistranded copper conductor unsheathed in and including concealed PVC conduit medium duty 20 mm dia or higher and heavy grade conduit fittings and heavy duty accessories with suitable size of sunk type cast iron or pressed steel terminal box 1.6mm thick for mounting of switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet as top cover, one green colour FRLS cable of same size as earth wire up to common earth and connected to earth dolly compete all as specified and directed by Eng.-in-charge of following. Make of PVC Wire: Havells/KEI/Finolex/L&T. Note: The wiring to be done as per IE rule and maintain colour code accordingly.

One light point point /bell buzzer point controlled by one-one way switch.

One ceiling fan/Exhaust fan point controlled by one-one way switch through Regulator.

One three pin 5 Amp socket on same board with other switches.

One three pin 5 Amp socket on independent board

One light point controlled by two, two way switch

All as per item No 201 above but one 3 pin socket outlet 15 Amp on independent board with cable 2.5 Sq mm size, with earth continuity coductor of size 1.5 Sq mm.

M&L for point wiring with 1.5 Sqmm. (nominal area) FRLS, single core PVC insulated 1100 Volts, grade multistranded copper conductor unsheathed in existing PVC / Steel, concealed conduits and existing MS boxes, mounting of switches, sockets, fan regulator etc with new 3 mm thick plastic laminated sheet as top cover, one green colour FRLS cable of same size as earth wire up to common earth and connected to earth dolly compete all as specified and directed by Eng.-in-charge of following Make of PVC Wire: Havells/KEI/Finolex/L&T. Note: The wiring to be done as per IE rule and maintain colour code accordingly

One light point point /bell buzzer point controlled by one-one way switch.

One ceiling fan/Exhaust fan point controlled by one-one way switch through Regulator.

One three pin 5 Amp socket on same board with other switches.

One three pin 5 Amp socket on independent board

One light point controlled by two way switch

All as per item No 203 above but one 3 pin socket outlet 15 Amp on independent board with cable 2.5 Sq mm size, with earth continuity coductor of size 1.5 Sq mm.

S&F switch piano flush, button type 5 Amp SP 250 V AC complete all as specified & directed.

S&F switch piano flush button type 15 Amps SP 250 V AC complete all as specified & directed.

S&F socket outlet multipurpose 3 Pin 5 Amp and 2 Pin 5 Amps 250 V AC complete all as specified & directed.

S&F socket outlet two in one three pin 5 Amp and 15 Amp 2 module 120 W flush type complete al as specified.

S&F Bell switch paino flush button type 5 Amp complete all as specified.

S&F ding dong bell AC 230 V single pole complete all as specified and directed .

S&F switch paino flush button type 5 Amp SP 2 way complete 250 V AC all as specified and directed.

S&F step type regulator socket type double module 5 step for ceiling fan 1200/1400 mm size 230 volts 6 Ampds 400 watts.

S&F ceiling rose, 3 terminal/PVC/polycarbonate, isolated body 250 V AC.

S&F lamp holder,pvc/polycarbonate type with back platesuitable for batten fittings including 9w LED bulb complete all as specified & directed.

M&L sub main wiring with 2 Single core PVC insulated unsheathed FRLS cable 1100 Volts grade heavy duty copper conductor multistranded of size 6 Sq.mm. (nominal area) drawing in and including 20 mm. dia or higher PVC conduit medium duty concealed, conduit heavy duty accessories and fittings. Insulated unsheathed FRLS cable copper conductor multistranded of size 4 Sq. mm. as earth wire upto common earth and connected to earth dolly including taking out existing submain complete all as specified & directed Make of PVC Wire: Havells/KEI/Finolex/L&T.

S&F in repairs sheet metal enclosures 240 volt with 200 Amp rated bus bar for double door 8 way DB,s IP-43 IK 09 metal door suitable for one MCB SPN as incoming and 06 MCB SP as out going complete all as specified and directed Make Legrand/Schneider/ABB..

S&F in repairs sheet metal enclosures Triple pole and neutral double door 415 Volt 4 way DBs IP-43 IK- 09 Vertical type suitable for 200 Ams rated bus bar & one MCCB 100 Amp as incoming and 12 MCB SP as outgoing complete all as specified and directed Make Legrand/Schneider/ABB.

S&F MCB double pole 240 Volt 10 KA 40 Amp 'B' series conforming to ISI marked complete all as specified & directed Make Legrand/Schneider/ABB...

S&F MCB single pole and 240 volt 10 KA 5-32 Amp 'B' series conforming to ISI marked all as specified and directed Make Legrand/Schneider/ABB...

S&F MCCB 415 Volt 16 KA 4 pole 63 Amp magnetic trip release & setting as incoming with fixing arrangement complete all as specified and directed. Make Legrand/Schneider/ABB..

S&F in replacement wall mounted tube light fitting 1x20/22 watts extruded aluminium polycarbonate covers PF 0.9 and above operating voltage 140V-270V colour temp 6500K & lumen input output 95 Lumen per watt and connected to ceiling rose with required length of two core flexible copper cable 23/0.0076 fixed on wall/roof complete all as specified and directed. Make: Philips cat part No TMC 501P1xT LED 22WP-3241(Tube Batten) and MAS LE$D 1200mm 18W-865-T-81 (Tube) / Wipro Cat part No WI0922208 (Tube Batten) LL13-181-65SE (Tube)/ Havells Cat Part No LUMILINEPLUSBS20WLED865SPCSS (Tube Batten)CRYSTAL1213T8DSTL20WLED865SGLASS(TUBE DOUBLE SIDE)

S&F in replacement LED down lighter recessed mounted 2x2 feet36W ultra modern designed LED luminaire which provide soft light and glair free symmetrical illumination suitable for grid ceiling and connected to ceiling rose with required length of two core flexible copper cable 23/0.0076 fixed on as per Havells Cat Part no: ENDURASLIMPROPLUS2x2PLR28/36WLED 840MOD or equivelent make of PHILIPs/ CROMPTONall as directed by Engineer-in-Charge.

S&F in replacement LED light fitting 1x10 w bulk head fitting complete with accessories and including connecting up with twin core twisted flexible copper conductor cable of suitable size Make:WIPRO CAT PART NO-LW07-141-XXX-57XXor equivelent , HAVELLS/CROMPTON

S&F in replacement LED light fitting decorative wall mounting SS brush finish fixture with frosted glass suitable for upto 1x40 watt mini glass lamp with and including one no 12 watt LED lamp. complete with accessories and including connecting up with twin core twisted flexible copper conductor cable of suitable sizeAs per Havells Cat Part NO LHFOAJE1TN1IO60 or equivelent of Bajaj/ Philips.

S&F in replacement mirror light decorative compact luminarious with decorative ends caps 9/10 Watt LED with all accessories and including connecting up with three core flexible copper conductor cable of suitable size complete all as specified. Make Havells Cat No Edgelite or equilent in Philips/Wipro

S & F high efficiency LED bulbs 1 X 12 watt that can be used as a ready replacement for existing GLS ad CFL direct fit in holder complete all as specified and directed.

S&F in replacement Integral LED Street Light Luminaire comprising of pressure die cast aluminum housing heat resistant toughened glass with frame IP-65 protection road way luminaries with high power LED 40/45 watt with efficiency 100 lumen/watt at system level, CCT>5700K, with average life class 50,000 burning hours, complete all as specified and directed. Make:- Crompton model No. LSTP-45-CDL/Havells model No. ENDURAPEARLNEOSL 40WLED757PASYTOPC /Philips Cat Part No BRP409LED CW036MRFGIPSUGRand syska SSK-ST-40W including taking out old unserviceable street light.

M&L for service cable 6 sq mm twin core Weather proof aluminium multistranded conductor cable PVC sheathed PVC insulated round suspended with No.8 SWG GI wire and reel insulators at distance of 01 mtr duly connected with earthing and clamp etc from Pole to pole including taking out old unserviceable service cable complete Make of PVC Cable Havells/KEI/Finolex/L&T..

All as per Item No 228 but 10x2 sq mm Make of PVC Cable: Havells/KEI/Finolex/L&T.

S&F in replacement LED tube rod 18/20 Watts single or double sided connections polycarbonate complete incl making connection alteration in existing tube light fitting complete.

S&F in replacement of ceiling fan 1200 mm sweep single phase 230 volts double ball bearing with down rod, canopy, blades etc BEE 5 star rated including connecting with twisted three cord flexible copper conductor cable (23/0076/) from ceiling rose to connector of fan complete all as specified and directed. Make : Havells/ Cromption/ Orient/ GEC/ (Note. Old unserviceable ceiling fan will be deposited in E/M store yard)

Disconnecting electric connection and taking down of ceiling fan / Exhaust fan removing capacitor,split pins of any sweep ceiling fan / Exhaust fans complete carefully for overhauling checking of bearings/bush, cleaning the fan blades with cleaning solution, replacing the unserviceable bearing, bush, capacitor , safety split pin and nuts, bolts, washer etc duly threaded of down rods (bush, bearing, capacitor, down rod, hanging clamps, will be paid under relevant item of the Sch 'A') reassembling the ceiling fan complete after greasing/servicing, oiling testing the same making the fan in serviceable condition ana refixing/ hanging the same complete all as specified and directed by Engineer-in-Charge . Note 1: Cost of Split pins, nut bolts and threading of down rod pipe rates are included in quoted rate

Supply only standard ball bearing of ceiling fans of 1200/1400 mm sweep to suitable for different makes of fans of approved quality including necessary greasing of the following:-

For 1200 mm C/Fans NBC or SKF, NORE.

For 1400 mm C/Fans NBC or SKF, NORE.

Supply only fan capacitor 2.5/3.15 mfd make universal / Asian/Epcos .complete all as specified and directed

Supply only fan capacitor 4 mfd complete all as specified and directed make universal / Asian/Epcos

S&F air ventilation fan 300mm metallic type, heavy duty double ball bearing with louvers single phase 900 RPM, 250V AC including necessary, making hole fixing arrangement on wall with frame 04 nos holdfastner, bolt, washer etc including connection with twisted white three core flexible copper multistranded conductor cable 23/0.0076 from ceiling rose to connector complete all as specified and directed by Engr-in-charge. Make:- Havells cat part No. Ventil Air DXWHT, CG cat No. BRISKAIR or equivalent Orient, (old ventilation fan shall be deposited to MES store yard)

S&F in replacement LED decorative post top lantern for garden light 40 watt IP 65 protection resistance to impact and corrosion glare, free and better uniformity milky version as per CG cat part No LPTO40CDL/ Bajaj model No. BGCTW4LEDWW including taking down old unserviceable post of lantern.

S&F in replacement and connecting wall mounted fan oscillating type 400 sweep single phase as per Havells Dzire 230V AC including necessary fixing arrangement on wall with bracket nut & bolts washer with 3 core twisted flexible white multistranded copper conductor cable(23/0.0066) complete all as directed by Eng-in-Charge.Make: Havells/ Crompton/ Usha (Note:- Old wall mounted fan shall deposited to MES store yard)

Dismantling electric and water connection of the 25/50 ltr's geyser, taking down from its original position on ground, opening up and removing apparatus plate from the tank, descaling the geyser inner tank and apparatus plate complete, checking for defects, replacement of unserviceable parts such as heating element, syphon assembly, thermostat, rubber gasket etc., reassembling and installation of the geyser into its original position and connecting all electric and water supply connection and testing on completion all as directed by Engineer-in-Charge.(Notes: (i) Heating element, syphon assembly, thermostat, rubber gasket etc if required to be replaced shall be measured and paid separately. (ii) Nut, bolts and hold fastners if required to be replaced shall be deemed to be included in the quoted rates of this item. (iii) All repairs shall be carried out on complaint basis. (iv) The contractor shall collect the complaint slip from JE E/M by 1100 hrs daily. (v) Payment for a geyser will be made only once through out the contract period irrespective number of repair carried out in same Geyser.

Supply only heating element any type/size as per site requirement of capacity 2 KW ISI Marked. Make:-Theta/Newton/Dasmesh/Bajaj

Supply only thermostat for geyser long type 11" in length as per site requirement temp setting on 60 degree centigrade ISI Marked, long type complete all as specified and directed. Make: Dashmesh/Indofors/Donfoss/Bajaj

S&F in replacement of water supply PVC flexible connection Nylon braided with suitable threaded check nut with washer complete suitable for hot/ cold water 15mm dia alongwith threaded Brass nuts and washers 45 cm long complete all as specified and directed. Make:- POLO/Havells/Prayag

Supply only syphon assembly for geyser any type of hole (6/7/9) all complete as per existing make & size as per site requirement all complete all as directed by Engr-in-Charge. Make:- Dashmesh/Theta/Newton/Bajaj.

Supply only pressure release valve as per existing make and size geyser spring loaded 15 mm dia complete all as specified and directed.

Supply only rubber Gasket as per existing make/size site requirement suitable for 25/50 Ltr capacity geyser complete all as specified and directed.

S&F in replacement of Geyser vertical mount type 25 ltrs capacity five star rated shockproof and rust proof metal body compact size including tow nos PVC connection heavy duty and connecting with all fixing arrangement of nuts & bolts and fixing on wall complete all as specified and directed. Make : Bajaj/ Recold/Havells. (Note- Old unserviceable Geyser will be deposited MES store yard).

S&F in replacement Sheet metal enclosure SPN with a two pin and earth plug and socket complete with one 20 amp single pole MCB complete all as specrified & directed

S & F in repairs modular switch 1 way 6A, 1 module, 230 volts all as specified and directed.

S & F in repairs modular switch 1 way 16A, 1 module, 230 volts all as specified and directed.

S & F in repairs modular socket 6A-2/3 pin, 2 module, 230 volts all as specified and directed.

S & F in repairs modular socket combination 16A,6pin, 2 module, 230 volts all as specified and directed.

S & F in repairs modular Fan step regulator, 120W, 2 module, 230 volts all as specified and directed.

S & F in repairs modular white cover plate with frame, 1 module, 230 volts all as specified and directed.

S & F in repairs modular white cover plate with frame, 2 module, 230 volts all as specified and directed.

S & F in repairs modular white cover plate with frame, 3 module, 230 volts all as specified and directed.

S & F in repairs modular white cover plate with frame, 4 module, 230 volts all as specified and directed.

S & F in repairs modular white cover plate with frame, 6 module, 230 volts all as specified and directed.

S&F in repair plug top 3 pin 15 Amps . Complete all as specified & directed. ISI Marked Make : Anchor/Cona/Plaza

M&L earthing complete with galvanised steel earth plate electrode 60cmx60cmx6 mm thick buried directly in ground vertically to a depth not less than 2.25m below ground level with top edge of the earth plate at a depth not less than 1.5m below ground level earth plate surrounded by and packed with 15cm thick layer of char coal dust and common salt earth lead GI wire 4.00mm dia by means of volts, nuts, check nuts and washers of galvanised iron and thimble and other end of earth wire connected to main switch board and protected by galvanised iron pipe light grade 15mm bore and water pipe 20mm bore GI light grade with funnel and wire mesh PCC chamber in cement in cement concrete 1:3:6 type C-1 pre-cast RCC (1:2:4) type B1, cover slab 54cm x 54 cm x 5 cm reinforced with 8 mm dia. TMT bars @ 150 mm c/c both ways, and with one handle for lifting made out of 10 mm dia MS round bar, provision of funnel, wire mesh. 20 mm bore galvanized steel tubing (medium grade) for watering, charcoal or coke and salt in alternated layers, 15 mm bore galvanized steel tubing (light grade) for protection of earth lead connection, including necessary excavaction and earth work in any type of soil and necessary testing complete all as specified and shown in elect plate No. 3 of SSR Part-I of 2009.

M/S C S AITHANI

R K BUILDERS