CONSTRUCTION OF ATHLETIC PAVILION SHED (CANOPY) AND SPECTATOR SEATS AT M.P.S.C. RAIPUR, DEHRADUN

Amount

DSR ITEM- 10.16.1 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes (SAIL(Steel Authority of India Ltd.), Tata Steel, JSW JindalPanther )

DSR ITEM- 12.5 Supply & installation of precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm +/- 5% total coated thickness (TCT) thick Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, (SAIL(Steel Authority of India Ltd.), Tata Steel, JSW JindalPanther )

DSR ITEM- 13.62.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

DSR ITEM- 5.2.2 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size)

DSR ITEM- 5.22.6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

DSR ITEM- 5.9.5 Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts

NSI ITEM:- Supply of Bucket Stadium Chair for normal seating, HDPE Blow moulded plastic chair, UV Resisted, Directly it will be floor mounted on the floor without any frame structure, Seat numbering will be provided, Size of Chair : 480 to 500 mm centre to centre(make wipro, Unique, Eurocoustic) 3 years warranty for UV resisted & any manufacturing defects.

NSI ITEM:- Installation charges of Bucket Stadium Chair for normal seating, HDPE Blow moulded plastic chair, UV Resisted

Shri Balaji Enterprises