Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.2 LAccepted-AOC HM 324 PHASE IX SAS NAGAR MOHALI PB | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹17.9 L+₹31,949.96 (1.82%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹18.5 L+₹95,310.40 (5.43%)Rejected-Finance | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹18.6 L+₹1.0 L (5.86%)Rejected-Finance W 701 HARBHAJAN VIHAR AWHO SECTOR 14 SAS NAGAR MOHALI PB 140307 | S A S NAGAR | PUNJAB | 140307 | L4 | Rejected-Finance Being L4 | |
| 5 | L5₹20.2 L+₹2.7 L (15.1%)Rejected-Finance H NO 1420 SECTOR 15 PANCHKULA HARYANA 134113 | PANCHKULA | HARYANA | 134113 | L5 | Rejected-Finance Being L5 |
Tender Value
₹19 L
EMD Value
₹38,000
Closing Date
11 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE I R AND D Chandigarh
Garrison Engineer I R and D, DIHAR Base Lab, Ground Floor, Near 3 (BRD) AF Stn, Industrial Area, Ph-II, Ramdarbar, Chandigarh
CERTAIN REPAIRS TO JOINERY, ALUMINIUM PARTITIONING AND OTHER ALLIED WORKS IN DOMESTIC AREA AT TBRL RANGE RAMGARH
2022_MES_523633_1
GE I R AND D/CHD-18/2022-23
Open Tender
Civil Works
Item Rate
180 days
Ramgarh
As per tender documents
8 documents required · 8 mandatory
₹500
GE I R AND D Chandigarh
₹38,000
Yes
7 Jul 2022
14 May 2022
13 Jun 2022
14 May 2022
11 Jun 2022
28 May 2022
60 days
Amount
Taking down chowkhats or frames with shutters (without taking off shutters from the frame) n.exc. 1.5 Sqm each complete all as specified and directed.
All as per serial item No 1.00 above but exc. 1.5 Sqm and n.exc. 4 Sqm each.
Taking down shutters of any description n.exc. 1 Sqm each complete all as specified and directed.
All as per serial item No 2.00 above but exc. 1 Sqm and n.exc. 2 Sqm each.
Refixing shutters of any description n exc 1 Sqm each in same opening.
Refixing shutters of any description exc 1 Sqm but n exc 2 sqm each in same opening.
Cutting holes for inserting hold fast and making good dismaltled portion in CM (1:3) in brick walls, built in cement mortar or cement concrete 1:2:4 type B1as required exc one brick but not exc two bricks complete all as specified and direcrted.
Supply and fixing for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail, on either side & as gap insert for top rail & bottom rail.Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and directed.
Supply and fixing for factory made solid PVC chowkhats or frames of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, complete all as specified and directed.
Supply and fixing aluminium anodized barrel tower bolt of extruded section 150mm long complete all as specified and directed.
All as per serial item no 8.00 above but 100mm long.
Supply and fixing for aluminium anodized handle of extruded section 150mm long complete all as specified and directed.
All as per serial item no 9.00 above but 125mm long.
Supply and fixing for aluminium anodized door stopper 140mm long overall length complete all as specified and directed.
Supply and fixing for MS butt hinges medium weight cold rolled 100mm size complete all as specified and directed.
All as per serial item no 11.00 above but 75mm size.
Supply and fixing for continuous (piano) hinges, mild steel, bright finish or electro-galvanised width of trap when open 40mm thick all as specified and directed.
Supply and fixing for MS barrel tower bolt stove enameled black with bright bolt 200mm long complete all as specified and directed.
Supply and fixing for mild steel pressed handle stove enamelled black 150mm complete all as specified and directed.
Supply and fixing for 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel bright finished all as specified and directed.
Supply and fixing for 100mm size of aluminium hasp & staple including bolt to hinge plate & fixed with screws, all as specified and directed.
Supply and fixing for factory made ERW section window box type ( 'P' Section) with hinges, steel handle, peg stay, complete with glazing bars, dovetailed or welded (to receive glazeed or gauzed) complete all as specified and directed.
Supply and fixing for steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded.
Supply and fixing for steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded.
Supply and fixing for steel ventilator with top hung shutter includig hinges steel peg stay, handle complete
Material and labour for framed work such as grills etc with ends of bars shouldred and or riveted or forged into spike, framed guard bars and similar work conforming to Fe 410-0 0r Fe 310-0.
Material and labour for plain, solid, straight chowkhats and frames, wrought framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints using 2nd class hardwood (hollock) complete all as specified and directed.
Supply and fixing for 105X60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs hinges lock strike plate etc complete all as specified and directed.
Supply and fixing for 125X60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.
Supply and fixing for 35mm thick 2nd class hardwood (Hollock) factory made glazed and skelton shutters, open rebated and prepared to receive glass etc divided into squares with sash bars, edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc, size of members all as specified and directed.
Supply and fixing for 35mm thick 2nd class hardwood (Hollock) factory made framed, panelled shutter (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces and fitted to chowkhats size of rails and styles as per IS-1003 (Part-I). The timber shall be kiln seasoned and chemically pressure treated complete all as specified and directed.
Supply and fixing for 19mm thick prelaminated particle boards (both side laminated) of interior grade type II grade I of approved shade complete fitted in cup board shutters complete all as specified and directed.
Supply and fixing for 2nd class hard wood plain fillets sectional area exc. 6sqcm n.exc. 13 Sqcm clean sawn, secured with nails or brads all as specified and directed.
Supply and fixing for 2nd class hard wood plain fillets sectional area exc. 3sqcm n.exc. 6 Sqcm clean sawn, secured with nails or brads all as specified and directed.
Supply and fixing for MS helical door spring (rat tail pattern) 300mm long including roller and roller plate complete including welding and providing 40 X 3mm flat iron welded to angle iron frame as in repair all as specified and directed.
Supply and fixing for galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.
All as per serial item no 31.00 above but fixed in repairs.
Supply and fixing for mild steel work as in doors or gates of angle or other section of grade Fe-410-W with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive of steel sheeting) fasteing and fixing complete fixed in repair all as specified and directed.
Supply and fixing in repairs 25mm dia anodised aluminium alloy fancy type curtain rods with fixing brackets, stops/knobs, roller etc complete all as specified and directed by Engr -in - Charge.
Material and labour for PCC 1:3:6 type C-0 using 12.5mm graded stone aggregate as in filling of pressed steel chowkats complete all as specified and directed.
Supply and fixing for 30mm thick flush shutters, solid core construction, with block board care and plywood face panels, commercial type on both sides all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frame complete all as specified and directed.
Supply and fixing 3.0mm thick ordinay sheet glass in squares n.exc. 0.5 Sqm each pane with oil putty all as specified and directed.
All as per serial item no 37.00 above but of thickness 4.8mm.
Supply and fixing for figured glass, pin head type and glazing with oil putty in squares n.exc. 0.5 Sqm each of thickness 3.0mm.
Material and labour for powder coated aluminium standard section of size 101.60X44.45X2.0mm thick for door/window frame including jointing aluminium cleats of suitable size and lugs, etc complete all as specified and directed.
Material and labour for powder coated aluminium door shutters single/double leaf, side hung type, with top and lock rail of size 83X44.45X2mm thick, bottom rail 150X 44.45X2mm thick styles/meeting styles shall be of size 83X44.45X2mm thick including jointing cleats, rubber beading snap fit clips, aluminium screws etc, panels fitted with prelaminated particle board/glass including builders hardware ie aluminium tower bolt 150mm long 2 nos to each shutter , aluminium door handle 200mm long 2 nos to each shutter complete all as specified.(Prelaminated board and glass to be measured & paid separately).
Taking down aluminium door shutters of size exc. 1.00 Sqm but n.exc. 2.00 Sqm, dismantling the door and replacing the MS anchor rods 10mm dia, both sides screwed and tightening inside frame, both side bottled & reassembled the door, fittings all items glass beading, hinges replacing rubber/aluminium beading where defective and fitted in position complete all as specified and directed.
Supply and fixing for double action floor spring for aluminium door shutters fixed in repairs all as specified and directed.
Supply and fixing in repairs hydraulic door closer of aluminium fixed to door shutters of designation 2 all as specified and directed.
Supply and fixing in repairs 100mm size mortice locks of aluminium body, 4 levers suitable to aluminium door shutters all as specified and directed.
Supply and fixing for aluminium anodised window shutters, powder coated, side hung type without sash bars, aluminium section 83X44.45X2mm thick including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium builders hardware such as peg stage 150mm long -01 No, aluminium handles of size 100mm-01 No as each shutters, window shutter to be fitted with glass panes complete all as specified and directed by Engr-in-charge (glass panes to be measured & paid separately).
Supply and fixing for collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars top & bottom runners, MS handles, etc as specified, erected in position and securing runners with hold fasts & brackets, complete fixed in repairs.
Supply and fixing in repairs ventian blinds, sheer demout blinds of with aluminium roller tube, cassette colour white fabric weight 140gms, light control 70% fabric composition 100% polyester complete all as specified and directed by Engr -in - Charge.
Supply and fixing in repairs ventian blinds, vertical type, complete all as specified and directed by Engr -in - Charge.
Supply and fixing plain sheet glass, ordinary quality 4.8mm thick in panels of aluminium doors/windows/partitions fixed with aluminium glazing clips & rubber beading complete all as specified and directed.
All as per serial item no 50.00 above but wired glass 6.4mm thick.
Supply and fixing for 12mm thick prelaminated particle board (both sides laminated) of interior grade, type-II of approved brand with lamination of approved shades complete fitted in door panels, partitions etc all as specified and directed.
Material and labour for aluminium anodised section of 101.60mmX44.45mmX2mm for aluminium partitions, powder coated, fixed in position all as specified and directed.
Supply and fixing in repairs powder coated aluminium grills, fixed to aluminium windows/partitions/door frame including all fixing arrangements like aluminium channels, screws etc complete all as specified and directed by Engr -in-charge.
Dismantling existing wall/ceiling board any type including wooden framed work/GI frame work of any size & specifications all as specified and directed.
Supply and fixing for PVC wall Lining consisting of 4 to 5mm thick hollow type, single side prelam PVC sheet used instead of plain colour sheet fix to wall with screws incl matching PVC beading all as per specified and directed by Engr -in -Charge.
Supply and fixing for suspended false ceiling includes GI angle of size 0.5mm thick having two equal flanges of 25mm along perimeter of ceiling, screws fixed to brick wall with the help of nylon sleeves and screws at 610mm centre to centre. Suspended H.D tube section of size 18 mm X 40 mm X 0.8 mm thick with the help of level adjuster made of zinc alloy 50 mm X 25 mm from soffit at 1220mm centre to centre with MS flat 25 mm X 3 mm thick fixed to soffit with GI cleat and metal expansion fastner. HDU section of 0.56 mm thickness having knurled web of 40 mm and two equal flanges of 35mm with lips of 8.5 mm fixed to the HD tube section with help of connecting clips and in direction perpendicular to the main section at 610 mm centre to centre 12.5mm thick tapered edge Gypsum board shall be fixed to HDU section with 25mm drywall screws at 230mm centre to centre. (Gyp. Board shall be measured & paid for separately).
Supply and fixing for 12.5mm Gypsum board to frame work including jointing and taping complete all as specified and directed.
Material and labour for preparation of new surfaces of any description over 10 cm girth or width, not other-wise, described and applying two coat of oil bound distmber any tint on roof ceiling, including preparation of surfaces complete all as specified and directed.
Supply and fixing for 300mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed
Supply and fixing for 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed
Supply and fixing for rubber beading in aluminium doors and windows fixed in repair
Supply and fixing for aluminium beading in aluminium doors and windows fixed with screw as in repair
Taking down rolling shutters push/pull type and removing all denting, bending & greasing, tightening the springs and refixed in position complete all as specified and directed.
All as per serial item No 63.00 but gear type operated by handles --ditto--.
Supply and fixing in repairs gauge springs for rolling shutters as per existing complete all as specified and directed.
Supply and fixing in repairs top cover of rolling shutters made out from 1.6mm thick sheet & fixed with nuts & bolts including removing cover complete all as specified and directed.
Supply and fixing for steel rolling shutters with thickness of lathes 1.00mm thick without ball bearing as specified with ventilating portion including top cover anchoring rod, hasp & staple & one shop coat of red oxide primer. Created in position as indicated for push pull or manhole type fixed as in repair.
All as per serial item no 66.00 above but 1.25mm thick gear operated type with level gear box & crank hands.
Demolition of brick / block masonry built in CM including all quoins, arches, pillars etc and clearing rubbish off the premises.
Material and labour for brick work with subclass B bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as speecified and directed
All as per serila item no 68.00 above but except brick complete all as specified and directed
Material and labour for PCC 1:2:4 type B-1, using 20mm graded crushed stone aggregate as in bed plates, hold fast ,lacing course coping, bed blocks etc complete all as specified and directed.
Taking down cement plaster on brick walls including hacking out joints, hacking for key, scrubbing down with water.
Material and labour for rendering 10 mm thick internal using cement plaster in CM 1:6 on fair faces of brick/concrete work surfaces complete all as specified and directed.
Material and labour for rendering 15 mm thick external using cement plaster in CM 1:4 on fair faces of brick/concrete work surfaces complete all as specified and directed.
Material and labour for two coats of synthetic enamel painting over a coat of pink primer including preparation of previously untreated surfaces of wood or wood based material exc. 10 cm width or girth complete all as specified and as directed.
Material and labour for painting one coat of synthetic enamel paint on steel surfaces (finished coat) to flat surfaces of any descirption including preparation of old surfaces all as specified and directed.
Material and labour for two coats of synthetic enamel paint including one coat of red oxide primer on steel surfaces exc. 10cm width or girth including preparation of new surfaces, complete all as specified and directed.
Material and labour for two coats of cement base paint over a coat of white wash on new plastered surfaces including preparation of surfaces.
Material and labour for preparing newly plastered surfaces and applying two coats of oil bound distemper over a coat of chalk whiting, white primer complete on walls
D.N.Gupta and Sons
M/s Krishan Aggarwal
M/s Hari Om Engineer and Contractor
KUKREJA ENGINEERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .