Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.7 LAccepted-AOC | ₹1.7 L | L1 | Accepted-AOC L1 |
| 2 | L2₹1.9 LRejected-AOC | ₹1.9 L | L2 | Rejected-AOC L2 |
| Sl No | Description | Qty | Unit | KM GOPALAKRISHNAN L1 | P.HARIDAS L2 |
|---|---|---|---|---|---|
| 1.00AE office renovation | |||||
| 1.00 | 21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15) | 23.28 | kg | 541.47 ₹12,605.42 | 600 ₹13,968 |
| 1.00 | 21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) | 13 | kg | 704.69 ₹9,160.97 | 850 ₹11,050 |
| 1.00 | 21.2.1:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side | 7.65 | sqm | 1,204.2 ₹9,212.13 | 1,500 ₹11,475 |
| 1.00 | 21.3.2:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm) | 3.45 | sqm | 1,653.94 ₹5,706.09 | 1,800 ₹6,210 |
| 1.00 | 9.100.3:Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:75 mm | 1 | no | 57.74 ₹57.74 | 100 ₹100 |
| 1.01 | 9.100.1:Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:125 mm | 25 | no | 74.92 ₹1,873 | 100 ₹2,500 |
| 1.01 | 9.95.8:Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:75x45x3.2 mm | 3 | no | 85.42 ₹256.26 | 100 ₹300 |
| 1.01 | OD522355/2025-2026:Supplying, Fabricating and fixing in position Best Quality PVC door with frame like SYNTEX make including cost of all fittings, labour charges etc complete (30 mm thick pre laminated PVC door shutters) | 2.1 | sqm | 2,641.36 ₹5,546.86 | 3,000 ₹6,300 |
| 1.01 | OD523337/2025-2026:Supply and fixing 3D Acrylic letters ENGLISH LETTERS 25-30cm or MALAYALAM
LETTERS 20-25cm for name board etc complete as per direction of Engineer incharge at site | 30 | each | 1,062.52 ₹31,875.60 | 1,200 ₹36,000 |
Tender Value
₹1.7 L
EMD Value
₹4,226
Closing Date
19 May 2026, 3:00 pmClosed
PRAJISHA A.R
AE LID EW ANANGANADI GP
PRO NO 330/26 COMPLETION OF ASSISTANT ENGINEER OFFICE BUILDING
2026_LSGD_850003_2
T1/2026-27/AE/LSGD/ANGDY
Open Tender
Civil Works - Roads
Ananganadi
Please refer Tender documents.
8 documents required · 8 mandatory
₹555
Yes
₹4,226
Yes
15 Jun 2026
11 May 2026
21 May 2026
11 May 2026
19 May 2026
11 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1AE office renovation | ||||||
| 1.001 | 21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15) | - | kg | - | - | BI01010001010000000000000515BI0100001114 |
| 1.002 | 21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) | - | kg | - | - | BI01010001010000000000000515BI0100001115 |
| 1.003 | 21.2.1:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side | - | sqm | - | - | BI01010001010000000000000515BI0100001116 |
| 1.004 | 21.3.2:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm) | - | sqm | - | - | BI01010001010000000000000515BI0100001117 |
| 1.005 | 9.100.3:Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:75 mm | - | no | - | - | BI01010001010000000000000515BI0100001118 |
| 1.006 | 9.100.1:Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:125 mm | - | no | - | - | BI01010001010000000000000515BI0100001119 |
| 1.007 | 9.95.8:Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:75x45x3.2 mm | - | no | - | - | BI01010001010000000000000515BI0100001120 |
| 1.008 | OD522355/2025-2026:Supplying, Fabricating and fixing in position Best Quality PVC door with frame like SYNTEX make including cost of all fittings, labour charges etc complete (30 mm thick pre laminated PVC door shutters) | - | sqm | - | - | BI01010001010000000000000515BI0100001121 |
| 1.009 | OD523337/2025-2026:Supply and fixing 3D Acrylic letters ENGLISH LETTERS 25-30cm or MALAYALAM
LETTERS 20-25cm for name board etc complete as per direction of Engineer incharge at site | - | each | - | - | BI01010001010000000000000515BI0100001122 |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1436273.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.09 MB
BOQ_1436273.xls
BOQ • 0.31 MB
viewnit.pdf
Tender Documents • 0.03 MB
viewsbd.pdf
Other Document • 1.68 MB
Download all tender documents and submit your bid